EB71SB18SGFYA [VISHAY]
CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,18 CONTACTS,0.156 PITCH,PC TAIL TERMINAL,#4-40;型号: | EB71SB18SGFYA |
厂家: | VISHAY |
描述: | CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,18 CONTACTS,0.156 PITCH,PC TAIL TERMINAL,#4-40 PC 连接器 |
文件: | 总4页 (文件大小:121K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EB7S
Vishay Dale
Edgeboard Connectors, Single Readout
FEATURES
• 0.156" (3.96 mm) C-C
• Bifurcated bellows contacts provide 2 flexing contact
surfaces to assure positive contact under adverse
conditions such as vibration or PC board irregularities
• Accepts PC board thickness of 0.054" to 0.071" (1.37 mm
to 1.80 mm)
• Polarization between contact positions in all sizes.
Between contact polarization permits polarizing without
loss of contact position
ELECTRICAL SPECIFICATIONS
Current Rating: 5 A
Test Voltage Between Contacts:
At sea level: 1800 VRMS
At 70 000 feet (21 336 meters): 450 VRMS
• Selective gold plating
Insulation Resistance: 5000 MΩ minimum at 500 VDC
potential
• Polarizing key is reinforced nylon, may be inserted by
hand, requires no adhesive.
Contact Resistance: 30 mV maximum at rated current (with
• Protected entry, provided by recessed leading edge of
contact, permits the card slot to straighten and align the
board before electrical contact is made. Prevents damage
to contact which might be caused by warped or out of
tolerance boards
• Recognized under the Component Program of
Underwriters Laboratories, Inc. listed under file
E65524, project 77CH3889
gold plating)
Operating Temperature: - 55 °C to + 125 °C
Humidity: 96 h at 90 % relative humidity at + 40 °C, dried at
room temperature for 3 h minimum, insulation resistance
was greater than 5000 MΩ
Durability: (With gold plating) After 500 cycles of insertion
and withdrawal of a 0.070" (1.78 mm) thick steel test
gauge, contact resistance less than 0.030 V at 5 A and
individual contact retention force when measured with 0.054"
(1.37 mm) thick steel test slug greater than ½ oz.
APPLICATIONS
For use with 0.062" (1.57 mm) printed circuit boards requiring
an edgeboard type connector on 0.156" (3.96 mm) centers
Shock: Three 50G shocks in each of
perpendicular planes with no loss of continuity
3 mutually
Vibration: 2 h in each of 3 mutually perpendicular planes,
frequency sweep 10 cps to 55 cps at 0.06 double amplitude
with no loss of continuity
MATERIAL SPECIFICATIONS
Body: (Standard) glass-filled phenolic per MIL-M-14, dark
green, flame retardant (UL 94 V-0). (Optional - see Ordering
Information)
PHYSICAL SPECIFICATIONS
Contact Type: Bifurcated bellows
“1” glass-filled diallyl phtalate per MIL-M-14, type SDG-F
green, flame retardant (UL 94 V-0)
Number of Contacts: 6, 10, 12, 15, 18, and 22
Contact Spacing: 0.156" (3.96 mm) center to center
Card Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm)
Card Slot Depth: Single readout = 0.300" (7.62 mm)
Note
“3” thermoplastic polyester, glass-filled, black, flame
retardant (UL 94 V-0)
Contacts: Phosphor bronze
Polarizing Key: Glass reinforced nylon, flame retardant
(UL 94H-B)
•
High temperature burn-in, edgeboard connectors, 0.156"
(3.96 mm) center to center are on www.vishay.com/doc?36006
Contact Plating: Gold (See Ordering Information)
ORDERING INFORMATION
EB7
1
S
A
22
SG
X
A
MODEL BODY MATERIAL SINGLE
STANDARD CONTACTS
CONTACT PLATING
MOUNTING
VARIATIONS
POLARIZING
KEY POSITIONS
READOUT TERMINAL
VARIATIONS
SG = Selective gold plating
(0.00003" (0.000762 mm)
minimum thick) on contact area
with gold flash on terminal
SGF = Selective gold plating
(0.000010" (0.000254 mm)
minimum thick) on contact area
with gold flash on terminal.
All gold plating over 0.00005"
(0.00127 mm) minimum nickel
underplate.
Optional body
material
1 = Diallyl
Phthalate
3 = Glass-filled
Polyester
= Omit number
for standard
pheniolic
6, 10, 12,
15, 18,
or 22
Key(s) are located to
right of position(s)
designated. Required
only when polarizing
keys are to be factory
installed
A or B
Contact factory for additional
plating options.
Document Number: 36004
Revision: 16-Feb-09
For technical questions, contact: connectors@vishay.com
www.vishay.com
11
EB7S
Edgeboard Connectors, Single Readout
Vishay Dale
DIMENSIONS in inches (millimeters)
0.030 (0.762ꢀ
0.062 0.010
(1.57 0.254ꢀ
R Typ.
A
B
D
E
C
C
0.156 0.005
(3.96 0.127ꢀ
Non-Cumulative
See Table
for Mounting
Variations
See Table
for Terminal
Variations
0.250
(6.35ꢀ
0.328 0.010
(8.33 0.254ꢀ
0.440
(11.18ꢀ
Section C to C:
Polarizing Key:
Type “A”
0.054 to 0.071
(1.37 to 1.80ꢀ
0.028
(0.711ꢀ
0.230
(5.84ꢀ
0.300 (7.62ꢀ
Depth of
Card Insertion
0.245
(6.22ꢀ
When ordering polarizing keys individually, specify by the
Model Number:
PK-7 between contacts. Hand insertion tool, TPK-7,
provided upon request.
0.016 (0.410ꢀ
A
# OF CONTACT
POSITIONS
B
D
E
6
1.78 (45.21)
1.531 (38.89)
2.156 (54.76)
2.468 (62.69)
2.937 (74.60)
3.406 (86.51)
4.031 (102.39)
1.218 (30.94)
1.843 (46.81)
2.156 (54.76)
2.624 (66.65)
3.093 (78.56)
3.717 (94.41)
1.100 (27.94)
1.724 (43.79)
2.036 (51.71)
2.504 (63.60)
2.972 (75.49)
3.596 (91.34)
10
12
15
18
22
2.41 (61.21)
2.72 (69.09)
3.19 (81.03)
3.66 (92.96)
4.28 (108.71)
www.vishay.com
12
For technical questions, contact: connectors@vishay.com
Document Number: 36004
Revision: 16-Feb-09
EB7S
Edgeboard Connectors, Single Readout
Vishay Dale
MOUNTING VARIATIONS in inches (millimeters)
Type “V”
Type “VI”
Type “W”
Type “X”
Clearance Hole
Clearance Hole
No Mounting Pad
No Mounting Flange
Clearance Hole
0.250
(6.35ꢀ
Ref.
0.250
0.250
(6.35ꢀ
Ref.
(6.35ꢀ
Ref.
0.142
(3.61ꢀ
Dia.
0.220
(5.59ꢀ
Ref.
0.010 (0.254ꢀ
0.000 (0.000ꢀ
0.142 (3.61ꢀ Dia.
0.128 (3.25ꢀ Dia.
Type “XI”
Clearance Hole
Type “Y”
Threaded Insert
Type “Z”
Floating Bushing Radial Float 0.047 (1.19ꢀ
No Mounting Pad
0.250
(6.35ꢀ
Ref.
0.250
(6.35ꢀ
Ref.
0.250
(6.35ꢀ
Ref.
Note: Overall body length
increased by 0.060 (1.52)
0.250
[6.35]
Dia.
0.128
(3.25ꢀ
Dia.
0.116
(2.95ꢀ
Dia.
4-40
UNC-2B
0.220
(5.59ꢀ
Ref.
0.218
(5.54ꢀ
Ref.
0.270 (6.86ꢀ
TERMINAL VARIATIONS in inches (millimeters)
Type “A”
Pierced
Type “B”
Solder Dip
To fit 3,
#22 AWG
Wires
To fit 0.051 (1.30ꢀ
Min. Through Hole
0.086
(2.18ꢀ
0.220 0.015
(5.59 0.381ꢀ
0.220 0.015
(5.59 0.381ꢀ
Document Number: 36004
Revision: 16-Feb-09
For technical questions, contact: connectors@vishay.com
www.vishay.com
13
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号:
EB71SB18SGVIA
CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,18 CONTACTS,0.156 PITCH,PC TAIL TERMINAL,HOLE .138-.163
VISHAY
EB71SB18SGWA
CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,18 CONTACTS,0.156 PITCH,PC TAIL TERMINAL
VISHAY
EB71SB18SGXIA
CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,18 CONTACTS,0.156 PITCH,PC TAIL TERMINAL,HOLE .125-.137
VISHAY
EB71SB18SGYA
Card Edge Connector, 18 Contact(s), 1 Row(s), Straight, 0.156 inch Pitch, Solder Terminal, #4-40, Green Insulator, Receptacle
VISHAY
EB71SB18SGZA
Card Edge Connector, 18 Contact(s), 1 Row(s), Straight, 0.156 inch Pitch, Solder Terminal, Hole .115-.125, Green Insulator, Receptacle
VISHAY
©2020 ICPDF网 联系我们和版权申明