EB75DBC36SGXA [VISHAY]
Edgeboard Connectors, Dual Readout; 边板连接器，双读数
| 型号： | EB75DBC36SGXA |
| 厂家： | 
VISHAY |
| 描述： | Edgeboard Connectors, Dual Readout |
| 文件： | 总4页 (文件大小：178K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EB7D
Vishay Dale
Edgeboard Connectors, Dual Readout
FEATURES
• 0.156" C-C x 0.140" grid [3.96mm x 3.56mm].
• Bifurcated bellows contacts provide 2 flexing contact
surfaces to assure positive contact under adverse conditions
such as vibration or PC board irregularities.
• Accepts PC board thickness of 0.054" - 0.071"
[1.37mm -1.80mm].
• Polarization between contact positions in all sizes.
Between contact polarization permits polarizing without loss
of a contact position.
• Selective gold plating.
• Polarizing key is reinforced nylon, may be inserted by hand,
requires no adhesive.
• Protected entry, provided by recessed leading edge of
contact, permits the card slot to straighten and align the
board before electrical contact is made. Prevents damage
to contact which might be caused by warped or out of
tolerance boards.
• Recognized under the Component Program of
Underwriters Laboratories, Inc. Listed under File
E65524, Project 77CH3889.
ELECTRICAL SPECIFICATIONS
Current Rating: 5 amps.
Test Voltage Between Contacts:
At sea level: 1800VRMS.
At 70,000 feet [21,336 meters]: 450VRMS.
Insulation Resistance: 5000 Megohm minimum at 500VDC
potential.
Contact Resistance: 30 millivolts maximum at rated current
(with gold plating).
Operating Temperature: - 55°C to + 125°C.
Humidity: 96 hours at 90% relative humidity at + 40°C, dried
at room temperature for 3 hours minimum, insulation
resistance 5000 Megohm.
Durability: (With gold plating.) After 500 cycles of insertion
and withdrawal of 0.070" [1.78mm] thick steel test gauge,
contact resistance less than 0.030V at 5 amps and individual
contact retention force when measured with a 0.054" [1.37mm]
thick steel test slug greater than 1/2 ounce.
APPLICATIONS
For use with 0.062" [1.57mm] printed circuit boards requiring
an edgeboard type connector on 0.156" [3.96mm] centers.
Shock: Three 50g shocks in each of 3 mutually perpendicular
planes with no loss of continuity.
MATERIAL SPECIFICATIONS
Vibration: 2 hours in each of 3 mutually perpendicular planes,
frequency sweep 10 to 55cps at 0.06 double amplitude with
no loss of continuity.
Body: (Standard) Glass-filled phenolic per MIL-M-14, dark
green, flame retardant (UL 94V-0). (Optional - See Ordering
Information):
“1” glass-filled diallyl phthalate per MIL-M-14, Type SDG-F
green, flame retardant (UL 94V-0).
“3” thermoplastic polyester, glass-filled, black, flame retardant
(UL 94V-0).
“5” thermoplastic polyphenylene sulfied, glass filled, brown,
flame retardant (UL 94V-0).
Contacts: Phosphor bronze.
PHYSICAL SPECIFICATIONS
Contact Type: Bifurcated bellows.
Number of Contacts: 6, 10, 12, 15, 18, 22, 36, 43 per side.
Contact Spacing: 0.156" [3.96mm] center to center.
Card Thickness: 0.054" to 0.071" [1.37mm to 1.80mm].
Card Slot Depth: Dual Readout = 0.260" [6.60mm].
Polarizing Key: Glass reinforced nylon, flame retardant (UL 94H-B).
Contact Plating: Gold (See Ordering Information).
NOTE: High temperature burn-in, edgeboard connectors,
0.156" [3.96mm] center to center are on page 20 of this catalog.
ORDERING INFORMATION
EB7
1
D
B
A
22
SG
X
A
MODEL
BODY
MATERIAL
DUAL
READOUT
OPTIONAL
CONTACTS
STANDARD
TERMINAL
VARIATIONS
CONTACTS
CONTACT
PLATING
MOUNTING POLARIZING
VARIATIONS
KEY
POSITIONS
Optional Body
Material
1 = Diallyl Phthalate.
3 = Glass-filled
Polyester.
5 = Glass-filled
Polyphenylene
Sulfied.
SG = Selective Gold
Plating (0.00003"
Beryllium Copper
contacts optional.
Available in “A” and
“E” contact styles
only. (Omit for
standard.)
A, E,
C or K
Key(s) are
6, 10, 12,
15, 18, 22, [0.000762mm] minimum
36 or 43
located to right
of position(s)
designated.
Required only
when polarizing
keys are to be
factory installed.
thick) on contact area with
Gold Flash on terminal.
SGF = Selective Gold
Plating (0.00001"
[0.000254mm] minimum
thick) on contact area with
Gold Flash on terminal.
All Gold Plating over
0.00005" [0.00127mm]
minimum, Nickel
Omit for
standard
phenolic.
Underplate.
Contact factory for
additional plating options.
For technical questions, contact Connectors@vishay.com
www.vishay.com
8
Document Number 36003
Revision 14-Aug-02
EB7D
Edgeboard Connectors, Dual Readout
Vishay Dale
DIMENSIONS in inches [millimeters]
0.030 [0.762]
0.062 ± 0.010
[1.57 ± 0.254]
R Typ.
A
B
D
E
C
C
0.156 ± 0.005
[3.96 ± 0.127]
Non-Cumulative
See Table
for Mounting
Variations
See Table
for Contact
Variations
0.250
[6.35]
F
0.440
± 0.010 [0.254]
[11.18]
Section C-C
Polarizing Key
Type “A”
Types “C” and “K”
0.028
[.711]
0.054 - 0.071
[1.37 - 1.80]
0.054 - 0.071
[1.37 - 1.80]
0.230
[5.84]
0.260 [6.60]
Depth of Card
Insertion
0.260 [6.60]
Depth of Card
Insertion
0.245
[6.22]
When ordering polarizing keys individually, specify
Model Number: PK-7 between contacts. Hand
insertion tool, TPK-7, provided on request.
0.250
[6.35]
0.140 [3.56]
# OF CONTACT
POSITIONS
A
B
D
E
F
6
10
12
15
18
22
36
43
1.78 [45.21]
2.41 [61.21]
2.72 [69.09]
3.19 [81.03]
3.66 [92.96]
4.28 [108.71]
6.53 [165.86]
7.62 [193.55]
1.53 [38.86]
1.22 [30.99]
1.84 [46.74]
2.16 [54.86]
2.62 [66.55]
3.09 [78.49]
3.72 [94.49]
5.91 [150.11]
7.00 [177.80]
1.10 [27.94]
1.72 [43.69]
2.04 [51.82]
2.50 [63.50]
2.97 [75.44]
3.60 [91.44]
5.78 [146.81]
6.80 [172.72]
0.328 [8.33]
0.328 [8.33]
0.328 [8.33]
0.328 [8.33]
0.328 [8.33]
0.328 [8.33]
0.438 [11.13]
0.500 [12.70]
2.16 [54.86]
2.47 [62.74]
2.94 [74.68]
3.41 [86.61]
4.03 [102.36]
6.22 [157.99]
7.30 [185.42]
For technical questions, contact Connectors@vishay.com
Document Number 36003
Revision 14-Aug-02
www.vishay.com
9
EB7D
Edgeboard Connectors, Dual Readout
Vishay Dale
MOUNTING VARIATIONS in inches [millimeters]
Type “V”
Type “VI”
Type “W”
Type “X”
Clearance Hole
Clearance Hole
No Mounting Pad
No Mounting Flange
Clearance Hole
0.250
[6.35]
Ref.
0.250
[6.35]
Ref.
0.250
[6.35]
Ref.
0.010 [.254]
0.000 [.000]
0.142
[3.61]
Dia.
0.220
[5.59]
Ref.
0.128 [3.25] Dia.
0.142 [3.61] Dia.
Type “XI”
Clearance Hole
No Mounting Pad
Type “Y”
Threaded Insert
Type “Z”
Floating Bushing Radial Float 0.047 [1.19]
0.250
[6.35]
Ref.
0.250 [6.35]
Ref.
0.250
[6.35]
Ref.
NOTE: Overall body length
increased by 0.060 [1.52].
0.250
[6.35]
Dia.
0.116
[2.95]
Dia.
4-40
0.218
[5.54]
Ref.
0.128
[3.25]
Dia.
0.220
[5.59]
Ref.
UNC-2B
0.270 [6.86]
TERMINAL VARIATIONS in inches [millimeters]
Type “A”
Pierced
Type “C” and “K”
Solder Dip
Type “E”
Card Extender
To fit 0.051 [1.30]
Dia. Eyelet
To fit 3,
#22 AWG
Wires
0.200 ± 0.015
[5.08 ± 0.381]
0.086
[2.18]
0.100
[2.54]
0.086 x 0.008
[2.18 x 0.203]
0.140 ± 0.015
[3.56 ± 0.381]
0.050
[1.27]
G
See Table
120°
Typ.
15°
Typ.
Uses
Type “A”
Contact
0.220 ± 0.015
[5.59 ± 0.381]
TYPE
G
C
K
0.125 ± 0.015 [3.18 ± 0.381]
0.200 ± 0.015 [5.08 ± 0.381]
For technical questions, contact Connectors@vishay.com
www.vishay.com
10
Document Number 36003
Revision 14-Aug-02
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
EB75DBE10SGFV
CONNECTOR, 20 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, CARD EXTENDER
VISHAY
EB75DBE10SGFVA
CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,20 CONTACTS,0.156 PITCH,EDGE MOUNT TERMINAL,HOLE .138-.163
VISHAY
EB75DBE10SGFVI
Card Edge Connector, 20 Contact(s), 2 Row(s), Female, Straight, Card Extender Terminal
VISHAY
EB75DBE10SGFVIA
CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,20 CONTACTS,0.156 PITCH,EDGE MOUNT TERMINAL,HOLE .138-.163
VISHAY
EB75DBE10SGFXIA
CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,20 CONTACTS,0.156 PITCH,EDGE MOUNT TERMINAL,HOLE .125-.137
VISHAY
EB75DBE10SGFY
CONNECTOR, 20 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, CARD EXTENDER
VISHAY
EB75DBE10SGFYA
CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,20 CONTACTS,0.156 PITCH,EDGE MOUNT TERMINAL,#4-40
VISHAY
©2020 ICPDF网 联系我们和版权申明