首页 |元器件品牌

EB7SB6SGFWA [VISHAY]

CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,6 CONTACTS,0.156 PITCH,PC TAIL TERMINAL;
EB7SB6SGFWA
型号： EB7SB6SGFWA
厂家： VISHAY    VISHAY
描述：

CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,6 CONTACTS,0.156 PITCH,PC TAIL TERMINAL

局域网 PC 连接器
文件： 总3页 (文件大小：133K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
EB7S  
Vishay Dale  
Edgeboard Connectors, Single Readout  
FEATURES  
• 0.156" [3.96mm] C-C.  
• Bifurcated bellows contacts provide 2 flexing contact surfaces  
to assure positive contact under adverse conditions such as  
vibration or PC board irregularities.  
• Accepts PC board thickness of 0.054" - 0.071"  
[1.37mm - 1.80mm].  
• Polarization between contact positions in all sizes.  
Between contact polarization permits polarizing without loss  
of a contact position.  
• Selective gold plating.  
• Polarizing key is reinforced nylon, may be inserted by hand,  
requires no adhesive.  
• Protected entry, provided by recessed leading edge of  
contact, permits the card slot to straighten and align the board  
before electrical contact is made. Prevents damage to  
contact which might be caused by warped or out of tolerance  
boards.  
ELECTRICAL SPECIFICATIONS  
Current Rating: 5 amps.  
Test Voltage Between Contacts:  
At sea level: 1800VRMS.  
At 70,000 feet [21,336 meters]: 450VRMS.  
Insulation Resistance: 5000 Megohm minimum at 500VDC  
potential.  
Contact Resistance: 30 millivolts maximum at rated current  
(with gold plating).  
Operating Temperature: - 55°C to + 125°C.  
• Recognized under the Component Program of  
Underwriters Laboratories, Inc. Listed under File E65524,  
Project 77CH3889.  
Humidity: 96 hours at 90% relative humidity at + 40°C, dried  
at room temperature for 3 hours minimum, insulation  
resistance 5000 Megohm.  
Durability: (With gold plating.) After 500 cycles of insertion  
and withdrawal of 0.070" [1.78mm] thick steel test gauge,  
contact resistance less than 0.030V at 5 amps and individual  
contact retention force when measured with a 0.054" [1.37mm]  
thick steel test slug greater than 1/2 ounce.  
APPLICATIONS  
For use with 0.062" [1.57mm] printed circuit boards requiring  
an edgeboard type connector on 0.156" [3.96mm] centers.  
MATERIAL SPECIFICATIONS  
Body: (Standard) Glass-filled phenolic per MIL-M-14, dark  
green, flame retardant (UL 94V-0).  
Shock: Three 50g shocks in each of 3 mutually perpendicular  
planes with no loss of continuity.  
Vibration: 2 hours in each of 3 mutually perpendicular  
planes, frequency sweep 10 to 55cps at 0.06 double amplitude  
with no loss of continuity.  
(Optional - See Ordering Information):  
“1” glass-filled diallyl phthalate per MIL-M-14, Type SDG-F  
green, flame retardant (UL 94V-0).  
“3” thermoplastic polyester, glass-filled, black, flame retardant  
(UL 94V-0).  
Contacts: Phosphor bronze.  
Polarizing Key: Glass reinforced nylon, flame retardant  
(UL94H-B).  
PHYSICAL SPECIFICATIONS  
Contact Type: Bifurcated bellows.  
Number of Contacts: 6, 10, 12, 15, 18 and 22 per side.  
Contact Spacing: 0.156" [3.96mm] center to center.  
Card Thickness: 0.054" to 0.071" [1.37mm to 1.80mm].  
Card Slot Depth: Single Readout = 0.300" [7.62mm].  
Contact Plating: Gold (See Ordering Information).  
NOTE: High temperature burn-in, edgeboard connectors,  
0.156" [3.96mm] center to center are on page 20 of this catalog.  
ORDERING INFORMATION  
EB7  
1
S
A
22  
SG  
X
A
MODEL  
BODY MATERIAL SINGLE  
READOUT  
STANDARD TERMINAL CONTACTS  
VARIATIONS  
CONTACT  
PLATING  
MOUNTING POLARIZING  
VARIATIONS  
KEY  
POSITIONS  
Optional Body  
Material  
A or B  
6, 10,  
12,  
15, 18  
or 22  
SG = Selective Gold Plating  
(0.00003" [0.000762mm]  
minimum thick) on contact area  
with Gold Flash on terminal.  
Key(s) are  
located to  
1 = Diallyl  
Phthalate  
3 = Glass-filled  
Polyester  
Omit for  
right  
of  
SGF = Selective Gold Plating  
position(s)  
designated.  
Required  
only when  
polarizing  
keys are to  
be factory  
installed.  
(0.00001"  
[0.000254mm]  
minimum thick) on contact area  
with Gold Flash on terminal.  
All Gold Plating over 0.00005"  
[0.00127mm] minimum Nickel  
Underplate.  
standard  
phenolic.  
Contact factory for additional  
plating options.  
Document Number 36004  
Revision 14-Aug-02  
For technical questions, contact Connectors@vishay.com  
www.vishay.com  
11  
EB7S  
Edgeboard Connectors, Single Readout  
Vishay Dale  
DIMENSIONS in inches [millimeters]  
Section C-C  
Type “A”  
0.030 [0.762]  
0.062 ± 0.010  
[1.57 ± 0.254]  
R Typ.  
0.054 - 0.071  
[1.37 - 1.80]  
A
B
D
E
0.300 [7.62]  
Depth of  
Card  
Insertion  
C
C
0.156 ± 0.005  
[3.96 ± 0.127]  
Non-Cumulative  
See Table  
for Mounting  
Variations  
0.016 [.410]  
See Table  
for Contact  
Variations  
0.250  
[6.35]  
0.328 ± 0.010  
[8.33 ± 0.254]  
0.440  
[11.18]  
# OF CONTACT  
POSITIONS  
A
B
D
E
6
10  
12  
15  
18  
22  
1.78 [45.21]  
2.41 [61.21]  
2.72 [69.09]  
3.19 [81.03]  
3.66 [92.96]  
4.28 [108.71]  
1.531 [38.89]  
2.156 [54.76]  
2.468 [62.69]  
2.937 [74.60]  
3.406 [86.51]  
4.031 [102.39]  
1.218 [30.94]  
1.843 [46.81]  
2.156 [54.76]  
2.624 [66.65]  
3.093 [78.56]  
3.717 [94.41]  
1.100 [27.94]  
1.724 [43.79]  
2.036 [51.71]  
2.504 [63.60]  
2.972 [75.49]  
3.596 [91.34]  
TERMINAL VARIATIONS in inches [millimeters]  
POLARIZING KEY  
Type “A”  
Pierced  
Type “B”  
Solder Dip  
0.028  
[.711]  
0.230  
[5.84]  
To fit  
0.051 [1.30]  
Dia. Eyelet  
To fit 3,  
#22 AWG  
Wires  
0.245  
[6.22]  
0.086  
[2.18]  
When ordering polarizing keys  
individually, specify Model  
0.220 ± 0.015  
[5.59 ± 0.381]  
0.220 ± 0.015  
[5.59 ± 0.381]  
Number: PK-7 between contacts.  
Hand insertion tool, TPK-7, provided  
on request.  
www.vishay.com  
12  
For technical questions, contact Connectors@vishay.com  
Document Number 36004  
Revision 14-Aug-02  
EB7S  
Edgeboard Connectors, Single Readout  
Vishay Dale  
MOUNTING VARIATIONS in inches [miilimeters]  
Type “V”  
Type “VI”  
Type “W”  
Type “X”  
Clearance Hole  
No Mounting Pad  
Clearance Hole  
No Mounting Flange  
Clearance Hole  
0.250 [6.35]  
0.250 [6.35]  
Ref.  
0.250 [6.35]  
Ref.  
Ref.  
0.010 [.254]  
0.000 [.000]  
0.142  
[3.61]  
Dia.  
0.220 [5.59]  
Ref.  
0.142 [3.61] Dia.  
0.128 [3.25] Dia.  
Type “XI”  
Clearance Hole  
No Mounting Pad  
Type “Y”  
Threaded Insert  
Type “Z”  
Floating Bushing Radial Float .047 [1.19]  
0.250 [6.35]  
Ref.  
0.250 [6.35]  
0.250 [6.35]  
Ref.  
Ref.  
NOTE: Overall body length  
increased by .060 [1.52].  
0.116  
[2.95]  
Dia.  
0.128  
[3.25]  
Dia.  
0.250 [6.35] Dia.  
0.270 [6.86]  
4-40  
UNC-2B  
0.218 [5.54]  
Ref.  
0.220 [5.59]  
Ref.  
Document Number 36004  
Revision 14-Aug-02  
For technical questions, contact Connectors@vishay.com  
www.vishay.com  
13  

相关型号：

EB7SB6SGFXIA

 CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,6 CONTACTS,0.156 PITCH,PC TAIL TERMINAL,HOLE .125-.137
VISHAY

EB7SB6SGFY

 CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,6 CONTACTS,0.156 PITCH,PC TAIL TERMINAL,#4-40
VISHAY

EB7SB6SGFYA

 CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,6 CONTACTS,0.156 PITCH,PC TAIL TERMINAL,#4-40
VISHAY

EB7SB6SGFZA

 CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,6 CONTACTS,0.156 PITCH,PC TAIL TERMINAL,HOLE .115-.125
VISHAY

EB7SB6SGV

 Card Edge Connector,
VISHAY

EB7SB6SGVA

 CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,6 CONTACTS,0.156 PITCH,PC TAIL TERMINAL,HOLE .138-.163
VISHAY

EB7SB6SGVIA

 CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,6 CONTACTS,0.156 PITCH,PC TAIL TERMINAL,HOLE .138-.163
VISHAY

EB7SB6SGW

 Card Edge Connector,
VISHAY

EB7SB6SGWA

 CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,6 CONTACTS,0.156 PITCH,PC TAIL TERMINAL
VISHAY

EB7SB6SGX

 Card Edge Connector,
VISHAY

EB7SB6SGXA

 Card Edge Connector, 6 Contact(s), 1 Row(s), Female, Straight, 0.156 inch Pitch, Solder Terminal, Hole .125-.137, Green Insulator, Receptacle
VISHAY

EB7SB6SGXI

 Card Edge Connector,
VISHAY
©2020 ICPDF网 联系我们和版权申明