EB8-A18 [VISHAY]
CONNECTOR, 36 CONTACT(S), FEMALE, VERTICAL SINGLE PART CARD EDGE CONN, SOLDER;型号: | EB8-A18 |
厂家: | VISHAY |
描述: | CONNECTOR, 36 CONTACT(S), FEMALE, VERTICAL SINGLE PART CARD EDGE CONN, SOLDER 连接器 |
文件: | 总3页 (文件大小:55K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Model EB8
Vishay Dale
Edgeboard Connectors
Dual Readout
FEATURES
• .156" C-C x .200" grid [3.96mm x 5.08mm].
• Greater design latitude.
3 body materials: Diallyl phthalate, phenolic and glass-filled
polyester.
6 contact termination styles.
8 body sizes.
7 mounting styles.
• Bifurcated bellows contacts provide 2 flexing contact surfaces
to assure positive contact.
• Accepts PC board thickness of .054" - .071" [1.37mm -1.80mm].
• Polarization between contact positions in all sizes.
• Selective gold plating.
• Recognized under the Component Program of
Underwriters Laboratories, Inc. Listed under File E65524,
Project 77CH3889.
ELECTRICAL SPECIFICATIONS
Current Rating: 5 amps.
Test Voltage Between Contacts:
APPLICATIONS
For use with .062" [1.57mm] printed circuit boards requiring
an edgeboard type connector on .156" [3.96mm] centers.
At sea level: 1800 V RMS.
PHYSICAL SPECIFICATIONS
At 70,000 feet [21,336 meters]: 450 V RMS.
Insulation Resistance: 5000 Megohm minimum at
500 VDC potential.
Contact Resistance: 30 millivolts maximum at rated current
(with gold plating).
Operating Temperature: - 55°C to + 125°C.
Humidity: 96 hours at 90% relative humidity at + 40°C,
dried at room temperature for 3 hours minimum, insulation
resistance 5000 Megohm.
Durability: (With gold plating.) After 500 cycles of insertion
and withdrawal of .070" [1.78mm] thick steel test gauge,
contact resistance less than .030 V at 5 amps and
individual contact retention force when measured with a
.054" [1.37mm] thick steel test pin greater than 1/2 ounce.
Shock: Three 50g shocks in each of 3 mutually
perpendicular planes with no loss of continuity.
Vibration: 2 hours in each of 3 mutually perpendicular
planes, frequency sweep 10 to 55 cps at .06 double
amplitude with no loss of continuity.
Contact Type: Bifurcated bellows.
Number of Contacts: 6, 10, 12, 15, 18, 22, 24, 25 per side.
Contact Spacing: .156" [3.96mm] center to center.
Card Thickness: .054" to .071" [1.37mm to 1.80mm].
Card Slot Depth: .330" [8.38mm], dual readout.
MATERIAL SPECIFICATIONS
Body:
“1” glass-filled diallyl phthalate per MIL-M-14, Type SDG-F
green, flame retardant (UL 94V-0).
“2” glass-filled phenolic per MIL-M-14, Type MFH dark
green, flame retardant (UL 94V-0).
“3” thermoplastic polyester, glass-filled, black, flame
retardant (UL 94V-0).
“5” thermoplastic polyphenylene sulfied, glass-filled, brown,
flame retardant (UL 94V-0).
Contacts: Phosphor bronze.
Polarizing Key: Glass reinforced nylon, flame retardant
(UL 94V-O).
Contact Plating: Gold (See How to Order).
NOTE: High temperature burn-in, edgeboard connectors,
.156" [3.96mm] center to center are on page 19 of this catalog.
MOUNTING VARIATIONS [Numbers in brackets indicate millimeters]
Type “VI”
Clearance Hole
No Mounting Pad
Type “X”
Clearance Hole
Type “V”
Type “W”
No Mounting Flange
Clearance Hole
.250 [6.35]
.250 [6.35]
Ref.
Ref.
.220 [5.59]
Ref.
.010 [.254]
.000 [.000]
.142
[3.61]
Dia.
.128 [3.25] Dia.
.142 [3.61] Dia.
Type “XI”
Clearance Hole
No Mounting Pad
Type “Y”
Threaded Insert
Type “Z”
Floating Bushing Radial Float .047 [1.19]
.250 [6.35]
Ref.
.250 [6.35]
Ref.
.220 [5.59]
Ref.
NOTE: Overall body length
increased by .060 [1.52].
.116
[2.95]
Dia.
.250 [6.35]
Dia.
4-40
.128 [3.25]
Dia.
.250 [6.35]
Ref.
UNC-2B
.270 [6.86]
Document Number 36005
Revision 01-Nov-99
www.vishay.com
13
Model EB8
Vishay Dale
DIMENSIONAL CONFIGURATIONS [Numbers in brackets indicate millimeters]
Section C-C
.030 [.762]
.060 [1.52]
R Typ.
.350 [8.89]
Typ.
.054 - .071
[1.37 - 1.80]
A
B
.330 [8.38]
D
Depth of
Card
Insertion
E
C
C
.156 [3.96]
Typ.
.200
[5.08]
See Table for
Contact Variations
.250
[6.35]
.340
[8.64]
.460
[11.70]
# OF CONTACT
POSITIONS
A
B
D
E
6
10
12
15
18
22
24
25
1.78 [45.21]
1.531 [38.89]
2.156 [54.76]
2.469 [62.71]
2.937 [74.60]
3.406 [86.51]
4.031 [102.39]
4.344 [110.33]
4.500 [114.30]
1.240 [31.50]
1.864 [47.35]
2.176 [55.27]
2.644 [67.16]
3.112 [79.05]
3.736 [94.89]
4.051 [102.89]
4.207 [106.86]
1.100 [27.94]
2.41 [61.21]
2.72 [69.09]
3.19 [81.03]
3.66 [92.96]
4.28 [108.71]
4.59 [116.59]
4.75 [120.65]
1.724 [43.79]
2.036 [51.71]
2.504 [63.60]
2.972 [75.49]
3.596 [91.34]
3.911 [99.34]
4.067 [103.30]
TERMINAL VARIATIONS [Numbers in brackets indicate millimeters]
Type “A”
Pierced
Type “C”
Type “D”
Solder Dip
To fit .051 [1.30]
Dia. Eyelet
To fit 3,
#22 AWG
Wires
To fit .051[1.30]
Dia. Eyelet
.086
[2.18]
.200 ± .015
[5.08 ±.381]
.200 ± .015
[5.08 ± .381]
.125 ±.015
[3.18 ± .381]
.200 ± .015
[5.08 ± .381]
.104 ± .015 [2.64 ± .381]
Type “K”
Solder Dip
Type “L”
SolderDip
To fit .051[1.30]
Dia. Eyelet
To fit .036 [.914]
Dia. Eyelet
.200 ± .015
[5.08 ± .381]
.200 ± .015
[5.08 ± .381]
.156 ± .015 [3.96 ± .381]
.200 ± .015 [5.08 ± .381]
www.vishay.com
14
Document Number 36005
Revision 01-Nov-99
Model EB8
Vishay Dale
TERMINAL VARIATIONS [Numbers in brackets indicate millimeters]
POLARIZING KEY
Type “E”
Card Extender
.120
[3.05]
.023
[.584]
.200 ± .015
[5.08 ± .381]
.325
[8.26]
.086
[2.18]
.100
[2.54]
.050
Uses
[1.27]
120°
Typ.
Type “A”
Contact
When ordering polarizing keys
individually, specify Model Number:
PK-8 between contacts.
15°
Typ.
Hand insertion tool, TPK-8, provided on
request.
HOW TO ORDER
EB8
1
B
A
22
G
X
A
MODEL
BODY
MATERIAL
OPTIONAL
CONTACTS
STANDARD
TERMINAL
VARIATIONS
CONTACTS
CONTACT
PLATING
MOUNTING
VARIATIONS
POLARIZING
KEY
POSITIONS
A, C, D,
K, L or E
Key(s) are located to
right of position(s)
designated.
Optional Body Material
1 = Diallyl Phthalate
2 = Phenolic
Required only when
polarizing keys are to
be factory installed.
3 = Glass-filled
Polyester
5 = Glass-filled
Polyphenylene
Sulfied
Beryllium Copper
6, 10, 12,
15, 18, 22,
24 or 25
contacts optional.
Available in “A” and “E”
contact styles only.
(Omit for standard.)
SG = Selective Gold Plating (.00003"
[.000762mm] minimum thick) on contact
area with Gold Flash on terminal.
SGF = Selective Gold Plating (.00001"
[.000254mm] minimum thick) on contact
area with Gold Flash on terminal.
All Gold Plating over .00005" [.00127mm]
minimum Nickel Underplate.
Contact factory for additional plating
options.
Document Number 36005
Revision 01-Nov-99
www.vishay.com
15
相关型号:
©2020 ICPDF网 联系我们和版权申明