EB81C22SGFY [VISHAY]

CONNECTOR, 44 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER;


型号：	EB81C22SGFY
厂家：	VISHAY
描述：	CONNECTOR, 44 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER
文件：	总4页 (文件大小：119K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

EB8

Vishay Dale

Edgeboard Connectors, Dual Readout

FEATURES

• 0.156" C-C x 0.200" grid (3.96 mm x 5.08 mm)

• Greater design latitude

body materials: Diallyl phthalate, phenolic and

glass-filled polyester

6 contact termination styles, 8 body sizes, 7 mounting

styles

• Bifurcated bellows contacts provide 2 flexing contact

surfaces to assure positive contact

ELECTRICAL SPECIFICATIONS

Current Rating: 5 A

• Accepts PC board thickness of 0.054" to 0.071" (1.37 mm

to 1.80 mm)

• Polarization between contact positions in all sizes

• Selective gold plating

• Recognized under the Component Program of

Underwriters Laboratories, Inc. listed under file

E65524, project 77CH3889

Test Voltage Between Contacts:

At sea level: 1800 V_RMS

At 70 000 feet (21 336 meters): 450 V_RMS

Insulation Resistance: 5000 MΩ minimum at 500 V_DC

potential

Contact Resistance: 30 mV maximum at rated current (with

gold plating)

APPLICATIONS

For use with 0.062" (1.57 mm) printed circuit boards requiring

an edgeboard type connector on 0.156" (3.96 mm) centers

Operating Temperature: - 55 °C to + 125 °C

Humidity: 96 h at 90 % relative humidity at + 40 °C, dried at

room temperature for 3 h minimum, insulation resistance

was greater than 5000 MΩ

Durability: (With gold plating) After 500 cycles of insertion

and withdrawal of a 0.070" (1.78 mm) thick steel test

gauge, contact resistance less than 0.030 V at 5 A and

individual contact retention force when measured with 0.054"

(1.37 mm) thick steel test slug greater than ½ oz.

Shock: Three 50G shocks in each of

perpendicular planes with no loss of continuity

Vibration: 2 h in each of 3 mutually perpendicular planes,

frequency sweep 10 cps to 55 cps at 0.06 double amplitude

with no loss of continuity

MATERIAL SPECIFICATIONS

Body:

“1” glass-filled diallyl phtalate per MIL-M-14, type SDG-F

green, flame retardant (UL 94 V-0)

“2” glass-filled phenolic per MIL-M-14, type MFH dark green,

flame retardant (UL 94 V-0)

“3” thermoplastic polyester, glass-filled, black, flame

retardant (UL 94 V-0)

“5” thermoplastic polyphenylene sulfied, glass-filled, brown,

flame retardant (UL 94 V-0)

3 mutually

Contacts: Phosphor bronze

Polarizing Key: Glass reinforced nylon, flame retardant

(UL 94H-B)

PHYSICAL SPECIFICATIONS

Contact Type: Bifurcated bellows

Number of Contacts: 6, 10, 12, 15, 18, 22, 24, 25 per side

Contact Spacing: 0.156" (3.96 mm) center to center

Card Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm)

Card Slot Depth: Dual readout = 0.330" (8.38 mm)

Note

Contact Plating: Gold (See Ordering Information)

•

High temperature burn-in, edgeboard connectors, 0.156"

(3.96 mm) center to center are on www.vishay.com/doc?36006

ORDERING INFORMATION

EB8

MODEL BODY MATERIAL

OPTIONAL

CONTACTS

STANDARD CONTACTS

TERMINAL PER SIDE

VARIATIONS

CONTACT PLATING

MOUNTING

VARIATIONS

POLARIZING

KEY POSITIONS

SG = Selective gold plating

(0.00003" (0.000762 mm)

Optional body

material

1 = Diallyl

Beryllium copper

contacts optional.

Available in “A”

and “E” contact

styles only (Omit

for standard)

6, 10, 12,

Key(s) are located to

right of position(s)

designated. Required

only when polarizing

keys are to be factory

installed

A, C, D,

15, 18, 22, minimum thick) on contact area

K, L, or E

24 or 25

with gold flash on terminal

SGF = Selective gold plating

(0.000010" (0.000254 mm)

minimum thick) on contact area

with gold flash on terminal.

All gold plating over 0.00005"

(0.00127 mm) minimum nickel

underplate.

phthalate

2 = Phenolic

3 = Glass-filled

polyester

5 = Glass-filled

polyphenylene

sulfied

Contact factory for additional

plating options.

www.vishay.com

For technical questions, contact: connectors@vishay.com

Document Number: 36005

Revision: 16-Feb-09

EB8

Edgeboard Connectors, Dual Readout

Vishay Dale

DIMENSIONS in inches (millimeters)

0.030 (0.762)

0.060 (1.52)

R Typ.

0.350 (8.89)

Typ.

0.156 (3.96)

Typ.

See Table for

Terminal Variations

0.250

(6.35)

0.340

(8.64)

0.460

(11.70)

Section C to C:

Polarizing Key:

0.054 to 0.071

(1.37 to 1.80)

0.120

(3.05)

0.023

(0.584)

0.330 (8.38)

Depth of

Card Insertion

0.325

(8.26)

When ordering polarizing keys individually, specify by the

Model Number:

PK-8 between contacts. Hand insertion tool, TPK-8,

provided upon request.

0.200

(5.08)

# OF CONTACT

POSITIONS

1.78 (45.21)

1.531 (38.89)

2.156 (54.76)

2.469 (62.71)

2.937 (74.60)

3.406 (86.51)

4.031 (102.39)

4.344 (110.33)

4.500 (114.30)

1.240 (31.50)

1.864 (47.35)

2.176 (55.27)

2.644 (67.16)

3.112 (79.05)

3.736 (94.89)

4.051 (102.89)

4.207 (106.86)

1.100 (27.94)

1.724 (43.79)

2.036 (51.71)

2.504 (63.60)

2.972 (75.49)

3.596 (91.34)

3.911 (99.34)

4.067 (103.30)

2.41 (61.21)

2.72 (69.09)

3.19 (81.03)

3.66 (92.96)

4.28 (108.71)

4.59 (116.59)

4.75 (120.65)

Document Number: 36005

Revision: 16-Feb-09

For technical questions, contact: connectors@vishay.com

www.vishay.com

EB8

Edgeboard Connectors, Dual Readout

Vishay Dale

MOUNTING VARIATIONS in inches (millimeters)

Type “V”

Type “VI”

Type “W”

Type “X”

Clearance Hole

No Mounting Pad

No Mounting Flange

Clearance Hole

0.250

(6.35)

Ref.

0.250

(6.35)

Ref.

0.220 (5.59)

Ref.

0.142

(3.61)

Dia.

0.010 (0.254)

0.000 (0.000)

0.142 (3.61) Dia.

0.128 (3.25) Dia.

Type “XI”

Clearance Hole

No Mounting Pad

Type “Y”

Threaded Insert

Type “Z”

Floating Bushing Radial Float 0.047 (1.19)

0.220 (5.59)

Ref.

0.250 (6.35)

Ref.

Note: Overall body length

increased by 0.060 (1.52)

0.128

(3.25)

Dia.

0.250 (6.35)

0.116

(2.95)

Dia.

4-40

UNC-2B

Dia.

0.250 (6.35)

Ref.

0.270 (6.86)

TERMINAL VARIATIONS in inches (millimeters)

Type “A”

Pierced

Type “D”

Solder Dip

Type “C”

To fit 3,

#22 AWG

Wires

To fit 0.051 (1.30)

Min. Through Hole

To fit 0.051 (1.30)

Min. Through Hole

0.086

(2.18)

0.200 0.015

(5.08 0.381)

0.200 0.015

(5.08 0.381)

0.200 0.015

(5.08 0.381)

0.104 0.015

(2.64 0.381)

0.125 0.015

(3.18 0.381)

Type “K”

Solder Dip

Type “L”

Solder Dip

To fit 0.051 (1.30)

Min. Through Hole

To fit 0.036 (0.914)

Min. Through Hole

0.200 0.015

(5.08 0.381)

0.200 0.015

(5.08 0.381)

0.156 0.015

(3.96 0.381)

0.200 0.015

(5.08 0.381)

Type “E”

Card Extender

0.200 0.015

(5.08 0.381)

0.086

(2.18)

0.100

(2.54)

0.050

(1.27)

Uses

Type “A”

Contact

120°

Typ.

15°

Typ.

www.vishay.com

For technical questions, contact: connectors@vishay.com

Document Number: 36005

Revision: 16-Feb-09

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.

Revision: 02-Oct-12

Document Number: 91000

EB81C22SGFY [VISHAY]

相关型号：

EB81C22SGFYA

EB81C22SGFZA

EB81C22SGVA

EB81C22SGVI

EB81C22SGVIA

EB81C22SGWA

EB81C22SGXA

EB81C22SGXI

EB81C22SGXIA

EB81C22SGZA

EB81C24SGFV

EB81C24SGFVA