EB85BE6SGVIA [VISHAY]
CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,12 CONTACTS,0.156 PITCH,EDGE MOUNT TERMINAL,HOLE .138-.163;
| 型号： | EB85BE6SGVIA |
| 厂家： | 
VISHAY |
| 描述： | CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,12 CONTACTS,0.156 PITCH,EDGE MOUNT TERMINAL,HOLE .138-.163 PC 连接器 |
| 文件： | 总3页 (文件大小：127K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EB8
Vishay Dale
Edgeboard Connectors, Dual Readout
FEATURES
• 0.156" C-C x 0.200" grid [3.96mm x 5.08mm].
• Greater design latitude.
3 body materials: Diallyl phthalate, phenolic and glass-
filled polyester.
6 contact termination styles.
8 body sizes.
7 mounting styles.
• Bifurcated bellows contacts provide 2 flexing contact
surfaces to assure positive contact.
• Accepts PC board thickness of 0.054" - 0.071"
[1.37mm -1.80mm].
• Polarization between contact positions in all sizes.
• Selective gold plating.
• Recognized under the Component Program of
Underwriters Laboratories, Inc. Listed under File
E65524, Project 77CH3889.
APPLICATIONS
For use with 0.062" [1.57mm] printed circuit boards requiring
an edgeboard type connector on .156" [3.96mm] centers.
ELECTRICAL SPECIFICATIONS
Current Rating: 5 amps.
Test Voltage Between Contacts:
At sea level: 1800VRMS.
PHYSICAL SPECIFICATIONS
Contact Type: Bifurcated bellows.
At 70,000 feet [21,336 meters]: 450VRMS.
Number of Contacts: 6, 10, 12, 15, 18, 22, 24, 25 per side.
Contact Spacing: 0.156" [3.96mm] center to center.
Card Thickness: 0.054" to 0.071" [1.37mm to 1.80mm].
Card Slot Depth: 0.330" [8.38mm], dual readout.
Insulation Resistance: 5000 Megohm minimum at
500VDC potential.
Contact Resistance: 30 millivolts maximum at rated
current (with gold plating).
MATERIAL SPECIFICATIONS
Body:
“1” glass-filled diallyl phthalate per MIL-M-14, Type SDG-F
green, flame retardant (UL 94V-0).
“2” glass-filled phenolic per MIL-M-14, Type MFH dark green,
flame retardant (UL 94V-0).
Operating Temperature: - 55°C to + 125°C.
Humidity: 96 hours at 90% relative humidity at + 40°C,
dried at room temperature for 3 hours minimum, insulation
resistance 5000 Megohm.
“3” thermoplastic polyester, glass-filled, black, flame
Durability: (With gold plating.) After 500 cycles of insertion
and withdrawal of 0.070" [1.78mm] thick steel test gauge,
contact resistance less than 0.030V at 5 amps and individual
contact retention force when measured with a 0.054" [1.37mm]
thick steel test pin greater than 1/2 ounce.
retardant (UL 94V-0).
“5” thermoplastic polyphenylene sulfied, glass-filled, brown,
flame retardant (UL 94V-0).
Contacts: Phosphor bronze.
Polarizing Key: Glass reinforced nylon, flame retardant
(UL 94V-O).
Shock: Three 50g shocks in each of 3 mutually perpendicular
planes with no loss of continuity.
Contact Plating: Gold (See Ordering Information).
Vibration: 2 hours in each of 3 mutually perpendicular planes,
frequency sweep 10 to 55cps at 0.06 double amplitude with
no loss of continuity.
NOTE: High temperature burn-in, edgeboard connectors,
0.156" [3.96mm] center to center are on page 20 of this catalog.
ORDERING INFORMATION
EB8
1
B
A
SG
X
A
22
MODEL
BODY
MATERIAL
OPTIONAL
CONTACTS
STANDARD
TERMINAL
VARIATIONS
A, C, D,
CONTACT
PLATING
MOUNTING POLARIZING
CONTACTS
VARIATIONS
KEY
POSITIONS
Key(s) are
located to
Optional Body
Material
1 = Diallyl
SG = Selective Gold Plating
(0.00003" [0.000762mm]
minimum thick) on contact
area with Gold Flash on
terminal.
SGF = Selective Gold Plating
(0.00001" [0.000254mm]
minimum thick) on contact
area with Gold Flash on
terminal.
Beryllium Copper
contacts optional.
Available in “A” and
“E” contact styles
6, 10, 12,
15, 18, 22,
24 or 25
K, L or E
right
of
Phthalate
position(s)
designated.
R e q u i r e d
only when
polarizing
keys are to
be factory
installed.
2 = Phenolic
3 = Glass-filled
Polyester
5 = Glass-filled
Polyphenylene
Sulfied
only.
(Omit for
standard.)
All Gold Plating over 0.00005"
[0.00127mm] minimum Nickel
Underplate.
Contact factory for additional
plating options.
www.vishay.com
14
For technical questions, contact Connectors@vishay.com
Document Number 36005
Revision 14-Aug-02
EB8
Edgeboard Connectors, Dual Readout
Vishay Dale
DIMENSIONS in inches [millimeters]
Section C-C
0.030 [.762]
0.060 [1.52]
R Typ.
0.350 [8.89]
Typ.
0.054 - 0.071
[1.37 - 1.80]
A
B
0.330 [8.38]
Depth of
Card
D
E
Insertion
C
C
0.156 [3.96]
Typ.
0.200
[5.08]
See Table for
Contact Variations
0.250
[6.35]
0.340
[8.64]
0.460
[11.70]
# OF CONTACT
POSITIONS
A
B
D
E
6
10
12
15
18
22
24
25
1.78 [45.21]
1.531 [38.89]
2.156 [54.76]
2.469 [62.71]
2.937 [74.60]
3.406 [86.51]
4.031 [102.39]
4.344 [110.33]
4.500 [114.30]
1.240 [31.50]
1.864 [47.35]
2.176 [55.27]
2.644 [67.16]
3.112 [79.05]
3.736 [94.89]
4.051 [102.89]
4.207 [106.86]
1.100 [27.94]
2.41 [61.21]
2.72 [69.09]
3.19 [81.03]
3.66 [92.96]
4.28 [108.71]
4.59 [116.59]
4.75 [120.65]
1.724 [43.79]
2.036 [51.71]
2.504 [63.60]
2.972 [75.49]
3.596 [91.34]
3.911 [99.34]
4.067 [103.30]
TERMINAL VARIATIONS in inches [millimeters]
Type “A”
Pierced
Type “C”
Type “D”
Solder Dip
To fit 0.051 [1.30]
Dia. Eyelet
To fit 3,
#22 AWG
Wires
To fit 0.051[1.30]
Dia. Eyelet
0.086
[2.18]
0.200 ± 0.015
[5.08 ± 0.381]
0.200 ± 0.015
[5.08 ± 0.381]
0.125 ± 0.015
[3.18 ± 0.381]
0.200 ± 0.015
[5.08 ± 0.381]
0.104 ± 0.015 [2.64 ± 0.381]
Type “K”
Type “L”
Solder Dip
SolderDip
To fit 0.051[1.30]
Dia. Eyelet
To fit 0.036 [0.914]
Dia. Eyelet
0.200 ± 0.015
[5.08 ± .381]
0.200 ± 0.015
[5.08 ± 0.381]
0.156 ± 0.015 [3.96 ± 0.381]
0.200 ± 0.015 [5.08 ± 0.381]
Document Number 36005
Revision 14-Aug-02
For technical questions, contact Connectors@vishay.com
www.vishay.com
15
EB8
Edgeboard Connectors, Dual Readout
Vishay Dale
TERMINAL VARIATIONS in inches [millimeters]
POLARIZING KEY
Type “E”
Card Extender
0.120
[3.05]
0.023
[.584]
0.200 ± 0.015
[5.08 ± .381]
.325
[8.26]
0.086
[2.18]
0.100
[2.54]
0.050
[1.27]
Uses
Type “A”
Contact
120°
Typ.
When ordering polarizing keys
individually, specify Model Number:
PK-8 between contacts.
Hand insertion tool, TPK-8, provided on
request.
15°
Typ.
MOUNTING VARIATIONS in inches [millimeters]
Type “VI”
Clearance Hole
No Mounting Pad
Type “W”
No Mounting Flange
Type “X”
Clearance Hole
Type “V”
Clearance Hole
0.250 [6.35]
Ref.
0.250 [6.35]
Ref.
0.220 [5.59]
Ref.
0.010 [0.254]
0.000 [0.000]
0.142
[3.61]
Dia.
0.128 [3.25] Dia.
0.142 [3.61] Dia.
Type “XI”
Clearance Hole
No Mounting Pad
Type “Y”
Threaded Insert
Type “Z”
Floating Bushing Radial Float 0.047 [1.19]
0.250 [6.35]
Ref.
0.250 [6.35]
Ref.
0.220 [5.59]
Ref.
NOTE: Overall body length
increased by 0.060 [1.52].
0.116
[2.95]
Dia.
0.250 [6.35]
Dia.
4-40
UNC-2B
0.128 [3.25]
Dia.
0.250 [6.35]
Ref.
0.270 [6.86]
www.vishay.com
16
For technical questions, contact Connectors@vishay.com
Document Number 36005
Revision 14-Aug-02
相关型号：
EB85BE6SGW
CONNECTOR, 12 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, CARD EXTENDER
VISHAY
EB85BE6SGWA
CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,12 CONTACTS,0.156 PITCH,EDGE MOUNT TERMINAL
VISHAY
EB85BE6SGXIA
Card Edge Connector, 12 Contact(s), 2 Row(s), Straight, 0.156 inch Pitch, Surface Mount Terminal, Hole .125-.137, Brown Insulator, Receptacle
VISHAY
EB85BE6SGYA
CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,12 CONTACTS,0.156 PITCH,EDGE MOUNT TERMINAL,#4-40
VISHAY
©2020 ICPDF网 联系我们和版权申明