F1773-382-2 [VISHAY]
AC Capacitors, Suppression Capacitors Class X2 AC 253 V (MKT) - Axial Type; 交流电容器,抑制电容器级X2 AC 253 V ( MKT ) - 轴向型型号: | F1773-382-2 |
厂家: | VISHAY |
描述: | AC Capacitors, Suppression Capacitors Class X2 AC 253 V (MKT) - Axial Type |
文件: | 总11页 (文件大小:117K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
F1773-2000
Vishay Roederstein
AC Capacitors, Suppression Capacitors
Class X2 AC 253 V (MKT) - Axial Type
FEATURES
Ø dt
Supplied loose in box, taped on reel or ammopack
RoHS compliant
40
5
Lmax.
40
5
RATED VOLTAGE
Dmax.
Dimensions in mm
AC 253 V; 50 Hz to 60 Hz
PERMISSIBLE DC VOLTAGE
LEAD DIAMETER
dt (mm)
D (mm)
DC 630 V
0.7 0.07
0.8 0.08
1.0 0.1
≤ 7
> 7 to < 16.5
ENCAPSULATION
≥ 16.5
Plastic, epoxy resin sealed, flame retardant UL-class 94 V-0
APPLICATIONS
CLIMATIC TESTING CLASS ACC. TO IEC 60068-1
High stabililty grade for continuous across the line X2
applications.
C ≤ 1.0 µF = 40/100/21/C
C > 1.0 µF = 40/085/21/C
See also application note:
www.vishay.com/docs/28153/anaccaps.pdf
CAPACITANCE RANGE (E12 SERIES)
E12 series 0.01 µF X2 to 2.2 µF X2
Preferred values acc. to E6
REFERENCE STANDARDS
IEC 60384-14 ed-3 and EN 60384-14
UL 1283
CSA
CAPACITANCE TOLERANCE
0.01 µF to ≤ 0.1 µF: 20 %
0.12 µF to ≤ 2.2 µF: 10 %
MARKING
C-value; tolerance; rated voltage; sub-class; manufacturer’s
type; code for dielectric material; manufacturer location;
manufacturer’s logo; year and week; safety approvals
LEADS
Tinned wire
DIELECTRIC
MAXIMUM APPLICATION TEMPERATURE
Polyester film
100 °C
ELECTRODES
DETAIL SPECIFICATION
Metallized
For more detailed data and test requirements contact:
RFI@vishay.com
CONSTRUCTION
Series construction
Document Number: 26507
Revision: 23-Sep-08
For technical questions, contact: RFI@vishay.com
www.vishay.com
1
F1773-2000
AC Capacitors, Suppression Capacitors
Class X2 AC 253 V (MKT) - Axial Type
Vishay Roederstein
COMPOSITION OF CATALOG NUMBER
CAPACITANCE
(numerically)
MULTIPLIER
(nF)
0.1
1
2
3
4
5
Example:
468 = 680 nF
10
100
F 1773 X XX 2
X X X
TYPE
VOLTAGE (Vac)
2 = 253 V
PACKAGING
Loose in box
000
900
901
Tape on reel
Taped in ammopack
Note
• For detailed tape specifications refer to “Packaging information” www.vishay.com/docs/28139/packinfo.pdf
SPECIFIC REFERENCE DATA
DESCRIPTION
VALUE
Rated AC voltage (URac
)
253 V
630 V
Permissible DC voltage (URdc
)
Tangent of loss angle
≤ 100 x 10-4 at 1 kHz
Rated voltage pulse slope (dU/dt)R at 350 Vdc
L 19 mm
200 V/µS
150 V/µS
100 V/µS
100 V/µS
L 26.5 mm
L 31.5 mm
L 41.5 mm
R between leads, for C ≤ 0.33 µF at 100 V; 1 min
RC between leads, for C > 0.33 µF at 100 V; 1 min
R between leads and case; 100 V; 1 min
> 15 000 MΩ
> 5000 s
> 30 000 MΩ
2000 V; - 1 min
1200 V; 1 min
100 °C
Withstanding (AC) voltage between leads and cover
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Maximum application temperature
www.vishay.com
2
For technical questions, contact: RFI@vishay.com
Document Number: 26507
Revision: 23-Sep-08
F1773-2000
AC Capacitors, Suppression Capacitors
Class X2 AC 253 V (MKT) - Axial Type
Vishay Roederstein
CAPACITANCE
(µF)
TOLERANCE
(%)
PITCH
(mm)
DIMENSIONS
D x L (mm)
MASS
(g)
SPQ (1)
(pieces)
ORDERING CODE (2)
dt = 0.70 0.07 mm
0.01
20
20
20
20
20
20
20
20
20
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
6.0 x 19.0
6.0 x 19.0
6.0 x 19.0
6.0 x 19.0
6.0 x 19.0
6.0 x 19.0
6.0 x 19.0
6.5 x 19.0
7.0 x 19.0
0.9
0.9
0.9
0.9
0.9
0.9
0.9
1.0
1.1
1500
1500
1500
1500
1500
1500
1500
1500
1500
F1773-310-2...
F1773-312-2...
F1773-315-2...
F1773-318-2...
F1773-322-2...
F1773-327-2...
F1773-333-2...
F1773-339-2...
F1773-347-2...
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
dt = 0.80 0.08 mm
0.056
0.068
0.082
0.1
20
20
20
20
10
10
10
10
10
10
10
10
10
10
22.5
22.5
22.5
22.5
22.5
30.0
30.0
30.0
30.0
30.0
30.0
30.0
35.0
35.0
8.0 x 19.0
8.0 x 19.0
9.0 x 19.0
9.5 x 19.0
10.5 x 19.0
8.5 x 26.5
9.5 x 26.5
10.0 x 26.5
11.0 x 26.5
12.0 x 26.5
13.0 x 26.5
14.0 x 26.5
14.0 x 31.5
15.0 x 31.5
1.6
1.6
1.8
2.0
2.2
2.2
2.6
2.8
3.3
3.8
4.7
5.5
6.2
6.7
1500
1500
1500
1000
1000
1000
1000
1000
750
F1773-356-2...
F1773-368-2...
F1773-382-2...
F1773-410-2...
F1773-412-2...
F1773-415-2...
F1773-418-2...
F1773-422-2...
F1773-427-2...
F1773-433-2...
F1773-439-2...
F1773-447-2...
F1773-456-2...
F1773-468-2...
0.12
0.15
0.18
0.22
0.27
0.33
750
0.39
750
0.47
1250
1000
1000
0.56
0.68
dt = 1.0 0.1 mm
0.82
10
10
10
10
10
10
35.0
35.0
35.0
45.0
45.0
45.0
16.5 x 31.5
18.0 x 31.5
19.5 x 31.5
18.0 x 41.5
19.5 x 41.5
21.5 x 41.5
8.3
9.5
750
750
500
500
450
400
F1773-482-2...
F1773-510-2...
F1773-512-2...
F1773-515-2...
F1773-518-2...
F1773-522-2...
1.0
1.2
11.0
13.5
15.7
17.8
1.5
1.8
2.2
Notes
(1) SPQ = Standard Packaging Quantity
(2) These capacitors can be delivered on continuous tape and reel; the ordering code is F1773-...-2900 taped on reel, F1773-...-2901 taped
ammopack
•
For detailed tape specifications refer to packaging information: www.vishay.com/docs/28139/packinfo.pdf
Document Number: 26507
Revision: 23-Sep-08
For technical questions, contact: RFI@vishay.com
www.vishay.com
3
F1773-2000
AC Capacitors, Suppression Capacitors
Class X2 AC 253 V (MKT) - Axial Type
Vishay Roederstein
APPROVALS
SAFETY APPROVALS X2
VOLTAGE
VALUE
FILE NUMBERS
EN 60384-14 (ENEC)
(= IEC 60384-14 ed-3)
253 Vac
0.01 µF to 2.2 µF X2
40005089
UL1283
250 Vac
253 Vac
253 Vac
0.01 µF to 2.2 µF X
0.01 µF to 1.0 µF X2
0.01 µF to 2.2 µF X2
E 76297
1913342
CSA
CB Test-Certificate
DE 1-7470
The ENEC-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the
ENEC-Agreement): Austria; Belgium; Czech Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom.
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in pinted-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to packaging information: www.vishay.com/docs/28139/packinfo.pdf
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests,it must be ensured that capacitor body is in good contact with the printed-circuit
board:
• For L ≤ 19 mm capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped
• The maximum diameter and length of the capacitors are specified in the dimensions table
• Eccentricity as shown in the drawing below:
1 mm
Storage Temperature
• Storage temperature: Tstg = - 25 °C to + 40 °C with RH maximum 80 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 1 °C, an atmospheric pressure of 86 kPa
to 106 kPa and a relative humidity of 50 2 %.
For reference testing, a conditioning period shall be applied over 96 4 h by heating the products in a circulating air oven at the
rated temperature and a relative humidity not exceeding 20 %.
www.vishay.com
4
For technical questions, contact: RFI@vishay.com
Document Number: 26507
Revision: 23-Sep-08
F1773-2000
AC Capacitors, Suppression Capacitors
Class X2 AC 253 V (MKT) - Axial Type
Vishay Roederstein
CHARACTERISTICS
Capacitance as a function of ambient temperature (typical curve)
Impedance as a function of frequency (typical curve)
10-1
100
6
1 kHz
4
2
max.
0
101
102
- 2
typical
- 4
min.
103
0.01
- 6
- 60
- 20
20
60 Tamb (°C) 100
f (MHz)
0.1
1
10
100
Impedance (Z) as a function of frequency (f)
at Ta = 20 °C (average)
Measurement with length 6 mm
Tanget of loss angle as a function of frequency (typical curve)
103
Resonant frequency as a function of capacitance (typical curve)
102
3
101
2
1
102
100
X2
C ≤ 0.33 µF (curve 1)
0.33 µF < C ≤ 1.2 µF (curve 2)
1.2 µF < C ≤ 2.2 µF (curve 3)
10-1
101
101
102
103
104
102
103
104
105
f (Hz)
C (nF)
Max. RMS voltage as a function of frequency
Max. RMS current as a function of frequency
103
102
101
104
2200 nF
1000 nF
470 nF
103
102
100 nF
47 nF
10 nF
101
100
Tamb ≤ 100 °C
Tamb ≤ 100 °C
10-1
101
102
103
104
105
101
102
103
104
105
f (Hz)
C (nF)
Document Number: 26507
Revision: 23-Sep-08
For technical questions, contact: RFI@vishay.com
www.vishay.com
5
F1773-2000
AC Capacitors, Suppression Capacitors
Class X2 AC 253 V (MKT) - Axial Type
Vishay Roederstein
Insulation resistance as a function of ambient temperature
(typical curve)
105
104
103
102
Tamb (°C)
- 50
0
50
100
APPLICATION NOTES AND LIMITING CONDITIONS
• For X2 electromagnetic interference suppression where a higher stabililty grade is needed for continuous across the line
applications (50/60 Hz) with a maximum mains voltage of 253 Vac.
• These capacitors are not intended for continuous pulse application. For these situations capacitors of the AC and pulse
programs must be used.
• For series impedance applications we refer to application note: www.vishay.com/docs/28153/anaccaps.pdf
• The maximum ambient temperature must not exceed 100 °C.
• Rated voltage pulse slope:
If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 350 Vdc and
divided by the applied voltage.
INSPECTION REQUIREMENTS
General Notes
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-14 ed-3
and Specific Reference Data”.
Group C inspection requirements
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE OF
SUB-GROUP C1
4.1
Dimensions (detail)
As specified in chapters “General data” of
this specification
Initial measurements
Capacitance
Tangent of loss angle:
For C ≤ 1 µF at 10 kHz or
for C > 1 µF at 1 kHz
4.3
Robustness of terminations
Tensile: Load 10 N; 10 s
No visible damage
Bending: Load 5 N; 4 x 90°
www.vishay.com
6
For technical questions, contact: RFI@vishay.com
Document Number: 26507
Revision: 23-Sep-08
F1773-2000
AC Capacitors, Suppression Capacitors
Class X2 AC 253 V (MKT) - Axial Type
Vishay Roederstein
SUB-CLAUSE NUMBER AND TEST
4.4 Resistance to soldering heat
CONDITIONS
PERFORMANCE REQUIREMENTS
No pre-drying
Method: 1A
Solder bath: 280 °C 5 °C
Duration: 10 s
4.19 Component solvent resistance
4.4.2 Final measurements
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 0.5 min
Recovery time:
Min. 1 h, max. 2 h
Visual examination
No visible damage
Legible marking
Capacitance
|ΔC/C| ≤ 5 % of the value measured initially
Tangent of loss angle
Increase of tan δ:
≤ 0.008 for: C ≤ 1 µF or
≤ 0.005 for: C > 1 µF
Compared to values measured initially
Insulation resistance
As specified in section “Insulation
resistance” of this specification
SUB-GROUP C1B PART OF SAMPLE OF
SUB-GROUP C1
Initial measurements
Capacitance
Tangent of loss angle:
For C ≤ 1 µF at 10 kHz or
for C > 1 µF at 1 kHz
4.20 Solvent resistance of the marking
Isopropylalcohol at room temperature
Method: 1
No visible damage
Legible marking
Rubbing material: Cotton wool
Immersion time: 5 0.5 min
4.6
Rapid change of temperature
θA = - 40 °C
θB = + 100 °C
5 cycles
Duration t = 30 min
4.6.1 Inspection
4.7 Vibration
Visual examination
No visible damage
Mounting: See section “Mounting” of this
specification
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/s²
(whichever is less severe)
Total duration 6 h
4.7.2 Final inspection
4.9 Shock
Visual examination
No visible damage
Mounting: See section “Mounting” for more
information
Pulse shape: Half sine
Acceleration: 490 m/s²
Duration of pulse: 11 ms
Document Number: 26507
Revision: 23-Sep-08
For technical questions, contact: RFI@vishay.com
www.vishay.com
7
F1773-2000
AC Capacitors, Suppression Capacitors
Class X2 AC 253 V (MKT) - Axial Type
Vishay Roederstein
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
Visual examination
PERFORMANCE REQUIREMENTS
4.9.2 Final measurements
No visible damage
Capacitance
|ΔC/C| ≤ 5 % of the value measured initially
Increase of tan δ:
Tangent of loss angle
≤ 0.008 for: C ≤ 1 µF or
≤ 0.005 for: C > 1 µF
Compared to values measured initially
Insulation resistance
As specified in section “Insulation
resistance” of this specification
SUB-GROUP C1
COMBINED SAMPLE OF SPECIMENS OF
SUB-GROUPS C1A AND C1B
4.11 Climatic sequence
4.11.1 Initial measurements
Capacitance
Measured in 4.4.2 and 4.9.2
Tangent of loss angle:
Measured initially in C1A and C1B
4.11.2 Dry heat
Temperature: 100 °C
Duration: 16 h
4.11.3 Damp heat cyclic
Test Db
First cycle
4.11.4 Cold
Temperature: - 40 °C
Duration: 2 h
4.11.5 Damp heat cyclic
Test Db
remaining cycles
4.11.6 Final measurements
Visual examination
Capacitance
No visible damage
Legible marking
|ΔC/C| ≤ 5 % of the value measured in
4.11.1.
Tangent of loss angle
Increase of tan δ:
≤ 0.008 for: C ≤ 1 µF or
≤ 0.005 for: C > 1 µF
Compared to values measured in 4.11.1.
Voltage proof
No permanent breakdown or flash-over
1200 Vdc; 1 min between terminations
Insulation resistance
≥ 50 % of values specified in section
“Insulation resistance” of this specification
SUB-GROUP C2
4.12 Damp heat steady state
21 days; 40 °C; 90 % to 95 % RH
no load
4.12.1 Initial measurements
Capacitance
Tangent of loss angle:
For C ≤ 1 µF at 10 kHz or
for C > 1 µF at 1 kHz
www.vishay.com
8
For technical questions, contact: RFI@vishay.com
Document Number: 26507
Revision: 23-Sep-08
F1773-2000
AC Capacitors, Suppression Capacitors
Class X2 AC 253 V (MKT) - Axial Type
Vishay Roederstein
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
4.12.3 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|ΔC/C| ≤ 5 % of the value measured in
4.12.1.
Tangent of loss angle
Increase of tan δ:
≤ 0. 008 for: C ≤ 1 µF or
≤ 0. 005 for: C > 1 µF
Compared to values measured in 4.12.1.
No permanent breakdown or flash-over
Voltage proof
1200 Vdc; 1 min between terminations
Insulation resistance
≥ 50 % of values specified in section
“Insulation resistance” of this specification
SUB-GROUP C3
4.13.1 Initial measurements
Capacitance
Tangent of loss angle:
For C ≤ 1 µF at 10 kHz or
for C > 1 µF at 1 kHz
4.13 Impulse voltage
4.14 Endurance
3 successive impulses, full wave, peak
voltage:
X2: 2.5 kV for C ≤ 1 µF
X2: 2.5 kV/√C for C > 1 µF
Max. 24 pulses
No self healing breakdowns or flashover
Duration: 1000 h
1.25 x URac at 100 °C for C ≤ 1 µF
1.25 x URac at 85 °C for C > 1 µF
Once in every hour the voltage is increased
to 1000 VRMS for 0.1 s via resistor of
47 Ω 5 %
4.14.7 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|ΔC/C| ≤ 10 % compared to values measured
in 4.13.1.
Tangent of loss angle
Increase of tan δ:
≤ 0.008 for: C ≤ 1 µF or
≤ 0.005 for: C > 1 µF
Compared to values measured in 4.13.1.
Voltage proof
No permanent breakdown or flash-over
1200 Vdc; 1 min between terminations
2000 Vac; 1 min between terminations
and case
Insulation resistance
≥ 50 % of values specified in section
“Insulation resistance” of this specification
SUB-GROUP C4
4.15 Charge and discharge
10 000 cycles
Charged to 350 Vdc
Discharge resistance:
350 Vdc
2 x C (dU/dt)
R =
---------------------------------
4.15.1 Initial measurements
Capacitance
Tangent of loss angle:
For C ≤ 1 µF at 10 kHz or
for C > 1 µF at 1 kHz
Document Number: 26507
Revision: 23-Sep-08
For technical questions, contact: RFI@vishay.com
www.vishay.com
9
F1773-2000
AC Capacitors, Suppression Capacitors
Class X2 AC 253 V (MKT) - Axial Type
Vishay Roederstein
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
4.15.3 Final measurements
Capacitance
|ΔC/C| ≤ 10 % compared to values measured
in 4.15.1.
Tangent of loss angle
Increase of tan δ:
≤ 0.008 for: C ≤ 1 µF or
≤ 0.005 for: C > 1 µF
Compared to values measured in 4.15.1.
Insulation resistance
Resonance frequency
≥ 50 % of values specified in section
“Insulation resistance” of this specification
SUB-GROUP C5
4.16 Radio frequency characteristic
≥ 0.9 times the value as specified in section
“Resonant frequency” of this specification
SUB-GROUP C6
4.17 Passive flammability
Class C
Bore of gas jet: Ø 0.5 mm
Fuel: Butane
Test duration for actual volume V in mm³:
V ≤ 250: 5 s
After removing test flame from capacitor, the
capacitor must not continue to burn for more
than 30 s. No burning particle must drop
from the sample.
250 < V ≤ 500: 10 s
500 < V ≤ 1750: 20 s
V > 1750: 30 s
One flame application
12 mm
~ 8 mm
45.0°
SUB-GROUP C7
4.18 Active flammability
20 cycles of 2.5 kV discharges on the test
capacitor connected to URac
The cheese cloth around the capacitors shall
not burn with a flame.
No electrical measurements are required.
www.vishay.com
10
For technical questions, contact: RFI@vishay.com
Document Number: 26507
Revision: 23-Sep-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
F1773-382-2000
CAPACITOR, METALLIZED FILM, POLYESTER, 630 V, 0.082 uF, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
F1773-410-2000
CAPACITOR, METALLIZED FILM, POLYESTER, 630 V, 0.1 uF, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
F1773-415-2901
CAPACITOR, METALLIZED FILM, POLYESTER, 630 V, 0.15 uF, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
F1773-433-2901
CAPACITOR, METALLIZED FILM, POLYESTER, 630 V, 0.33 uF, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明