F340X122748MKM2B0 [VISHAY]
THB Grade IIIB Class X1 Interference Suppression Film Capacitor;![F340X122748MKM2B0](http://pdffile.icpdf.com/pdf2/p00354/img/icpdf/F340X122748K_2173798_icpdf.jpg)
型号: | F340X122748MKM2B0 |
厂家: | ![]() |
描述: | THB Grade IIIB Class X1 Interference Suppression Film Capacitor |
文件: | 总13页 (文件大小:170K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
F340X1 480VAC
Vishay BCcomponents
www.vishay.com
THB Grade IIIB Class X1 Interference Suppression Film Capacitor
Radial MKP 480 VAC - Three Phase Across the Line
FEATURES
• IEC 60384-14: 2013 / AMD1: 2016 grade IIIB:
85 °C, 85 % RH, 1000 h at URAC certified
• AEC-Q200 qualified
• Maximum permissible AC voltage up to 530 V
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
LINKS TO ADDITIONAL RESOURCES
For standard across the line X1 and series impedance
applications.
See also application note: www.vishay.com/doc?28153
3
D
3D Models
QUICK REFERENCE DATA
220 nF to 8.2 μF
(preferred values according to E12)
20 %; 10 %
Rated capacitance range
Capacitance tolerance
Rated voltage range, URAC
Permissible DC voltage
Climatic testing class
480 VAC
800 VDC at 105 °C
40 / 105 / 56 / B
105 °C
Maximum application temperature
IEC 60384-14:2013
IEC 60384-14:2013 / AMD1:2016
EN 60384-14
Reference standards
IEC 60065 requires passive flammability class B
UL 60384-14 (2nd edition)
CSA-E60384-1:14 (3rd edition)
CQC
Dielectric
Electrodes
Polypropylene film
Metallized
Series construction
Construction
Plastic case, epoxy resin sealed, flame retardant
Encapsulation
Leads
UL-class 94 V-0
Tinned wire
C-value; tolerance; rated voltage; sub-class; manufacturer’s type; code for dielectric
material; manufacturer location, manufacturer’s logo; year and week; safety approvals
Marking
Note
•
For more detailed data and test requirements, contact rfi@vishay.com
DIMENSIONS in millimeters
l
w
h
lt
Ø dt
P
Revision: 12-May-2021
Document Number: 26073
1
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F340X1 480VAC
Vishay BCcomponents
www.vishay.com
COMPOSITION OF CATALOG NUMBER
CODE
P1 (mm)
27.5
PITCH CODE
K
P
Y
MULTIPLIER
Example:
37.5
52.5
0.1
1
2
3
4
5
427
510
270 nF
0.27 μF
1.0 μF
1000 nF
10
100
SPECIAL CODE FOR TERMINAL
2
2 pins
VOLTAGE
(#)
Customized
48 = 480 VAC
1 2 3 4
5 6
X 1
7
4
8 9
2 7
10 11
12
13
14
M
15
2
16
B
17
0
F 3 4 0
4
8
M
K
TOLERANCE
CLASS
M
K
20 %
10 %
SPECIAL
0 = Standard
Other = Special
TYPE
L1 (mm)
LEAD LENGTH CODE
PITCH (mm)
PACKING CODE
PACKING STYLE
REMARK
Pitch 27.5 mm and
3.5 0.3
P
≥ 27.5
All
B
Bulk
lead length 25 mm 2 mm
5
1
M
T
Tray
Rest all
25
2
I
All
0: Space holder
Note
Taped on reel not available
•
Revision: 12-May-2021
Document Number: 26073
2
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F340X1 480VAC
Vishay BCcomponents
www.vishay.com
SPECIFIC REFERENCE DATA
DESCRIPTION
VALUE
Rated voltage range, URAC
Maximum permissible AC voltage
Rated voltage range, URDC
Tangent of loss angle:
480 VAC
530 V
800 VDC
At 1 kHz
20 x 10-4
30 x 10-4
40 x 10-4
At 10 kHz
30 x 10-4
50 x 10-4
80 x 10-4
C 1.5 μF
1.5 μF< C 3.9 μF
C > 3.9 μF
Rated voltage pulse slope (du/dt)R at 670 VDC
Pitch = 27.5 mm
100 V/μs
80 V/μs
Pitch = 37.5 mm
Pitch = 52.5 mm
35 V/μs
R between leads, for C 0.33 μF at 100 V; 1 min
RC between leads, for C > 0.33 μF at 100 V; 1 min
R between leads and case; 100 V; 1 min
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s:
C 1 μF
> 15 000 M
> 5000 s
> 30 000 M
3400 V; 1 min
2500 V; 1 min
2460 V; 1 min
C > 1 μF
Withstanding (AC) voltage between leads and case
Note
(1)
See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
ELECTRICAL DATA AND ORDERING INFORMATION
CATALOG NUMBER F340X1... AND PACKAGING
DIMENSIONS (2)
w x h x l
LOOSE IN BOX
URAC CAP.
MASS
(g) (1)
(V)
(μF)
SHORT LEADS
lt = 3.5 mm 0.3 mm lt = 5.0 mm 1.0 mm
PITCH = 27.5 mm 0.4 mmꢀ dt = 0.80 mm 0.08 mmꢀ C-TOL. = 20 ꢁ
LONG LEADS
(mm)
SPQ lt = 25.0 mm 2.0 mm SPQ
0.22
0.33
0.47
0.68
1.0
42248MKP2T0
43348MKP2T0
44748MKP2T0
46848MKP2T0
51048MKP2T0
51548MKP2T0
42248MKM2T0
43348MKM2T0
44748MKM2T0
46848MKM2T0
51048MKM2T0
51548MKM2T0
42248MKI2B0
43348MKI2B0
44748MKI2B0
46848MKI2B0
51048MKI2B0
51548MKI2B0
13.0 x 23.0 x 32.0
9.2
115
115
15.0 x 25.0 x 32.0
18.0 x 28.0 x 32.0
21.0 x 31.0 x 32.0
22.0 x 38.0 x 32.0
12.3
16.1
20.3
42.5
95
80
65
60
95
80
65
65
480
1.5
PITCH = 37.5 mm 0.4 mmꢀ dt = 1.00 mm 0.1 mmꢀ C-TOL. = 20 ꢁ
2.2
3.3
21.5 x 38.5 x 42.0
30.0 x 45.0 x 42.0
61
52248MPP2T0
53348MPP2T0
52248MPM2T0
53348MPM2T0
84
63
52248MPI2T0
53348MPI2T0
84
63
94.5
PITCH = 52.5 mm 0.4 mmꢀ dt = 1.20 mm 0.12 mmꢀ C-TOL. = 20 ꢁ
4.7
6.8
138.5
135
54748MYP2T0
56848MYP2T0
54748MYM2T0
56848MYM2T0
54748MYI2T0
56848MYI2T0
30.0 x 45.0 x 57.5
45
45
Notes
•
SPQ = Standard Packing Quantity
Weight for short lead product only
For tolerances see chapter “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances”
(1)
(2)
Revision: 12-May-2021
Document Number: 26073
3
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F340X1 480VAC
Vishay BCcomponents
www.vishay.com
ELECTRICAL DATA AND ORDERING INFORMATION
CATALOG NUMBER F340X1... AND PACKAGING
DIMENSIONS (2)
w x h x l
LOOSE IN BOX
URAC CAP.
MASS
(g) (1)
(V)
(μF)
SHORT LEADS
lt = 3.5 mm 0.3 mm lt = 5.0 mm 1.0 mm
LONG LEADS
(mm)
SPQ lt = 25.0 mm 2.0 mm SPQ
PITCH = 27.5 mm 0.4 mmꢀ dt = 0.80 mm 0.08 mmꢀ C-TOL. = 10 ꢁ
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
42248KKP2T0
42748KKP2T0
43348KKP2T0
43948KKP2T0
44748KKP2T0
45648KKP2T0
46848KKP2T0
48248KKP2T0
51048KKP2T0
51245KKP2T0
42248KKM2T0
42748KKM2T0
43348KKM2T0
43948KKM2T0
44748KKM2T0
45648KKM2T0
46848KKM2T0
48248KKM2T0
51048KKM2T0
51245KKM2T0
42248KKI2B0
42748KKI2B0
43348KKI2B0
43948KKI2B0
44748KKI2B0
45648KKI2B0
46848KKI2B0
48248KKI2B0
51048KKI2B0
51245KKI2B0
13.0 x 23.0 x 32.0
9.2
115
115
15.0 x 25.0 x 32.0
18.0 x 28.0 x 32.0
12.3
16.1
95
80
95
80
21.0 x 31.0 x 32.0
22.0 x 38.0 x 32.0
20.3
22.5
65
60
65
65
1.2
480
PITCH = 37.5 mm 0.4 mmꢀ dt = 1.00 mm 0.1 mmꢀ C-TOL. = 10 ꢁ
1.5
1.8
2.2
2.7
3.3
3.9
61.5
61
51548KPP2T0
51848KPP2T0
52248KPP2T0
52748KPP2T0
53348KPP2T0
53948KPP2T0
51548KPM2T0
51848KPM2T0
52248KPM2T0
52748KPM2T0
53348KPM2T0
53948KPM2T0
51548KPI2T0
51848KPI2T0
52248KPI2T0
52748KPI2T0
53348KPI2T0
53948KPI2T0
21.5 x 38.5 x 42.0
30.0 x 45.0 x 42.0
84
63
84
63
60
95.5
92.5
88.5
PITCH = 52.5 mm 0.4 mmꢀ dt = 1.20 mm 0.12 mmꢀ C-TOL. = 10 ꢁ
4.7
5.6
6.8
8.2
137.5
136
54748KYP2T0
55648KYP2T0
56848KYP2T0
58248KYP2T0
54748KYM2T0
55648KYM2T0
56848KYM2T0
58248KYM2T0
54748KYI2T0
55648KYI2T0
56848KYI2T0
58248KYI2T0
30.0 x 45.0 x 57.5
35.0 x 50.0 x 57.5
45
40
45
40
171
165.5
Notes
•
SPQ = Standard Packing Quantity
Weight for short lead product only
For tolerances see chapter “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances”
(1)
(2)
APPROVALS
SAFETY APPROVALS X1
VOLTAGE
VALUE
FILE NUMBERS
LINK
EN 60384-14 (ENEC)
(= IEC 60384-14 ed-4 (2013))
480 VAC
220 nF to 8.2 μF
ENEC16/FI/19/10008
www.vishay.com/doc?28247
UL 60384-14
CSA-E384-14
480 VAC
480 VAC
220 nF to 8.2 μF
220 nF to 8.2 μF
E354331
E354331
www.vishay.com/doc?28249
www.vishay.com/doc?28249
www.vishay.com/doc?28248
www.vishay.com/doc?28250
www.vishay.com/doc?28246
L-18001205119
F-18001207457
FI-39834
CQC
480 VAC
220 nF to 8.2 μF
CB-test certificate
480 VAC
220 nF to 8.2 μF
The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the
ENEC-agreement): Austria; Belgium; Czech Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Sweden, Switzerland, and United Kingdom.
Revision: 12-May-2021
Document Number: 26073
4
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F340X1 480VAC
Vishay BCcomponents
www.vishay.com
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board.
• For pitches 27.5 mm the capacitors shall be mechanically fixed by the leads and the body clamped
Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances
For the maximum product dimensions and maximum space requirements for length (lmax.), width (wmax.), and height (hmax.
following tolerances must be taken in account in the envelopment of the components as shown in the drawings below.
)
Imax. = l + l, wmax. = w + w, and hmax. = h + h
• For products with pitch = 27.5 mm, w = l = h = 0.7 mm
• For products with pitch = 37.5 mm, w = l = h = 0.7 mm
• For products with pitch = 52.5 mm, w = l = h = 1.0 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
wmax. = w + Δw
Eccentricity
CBA116
Imax. = I + ΔI
hmax. = h + Δh
Seating plane
For the minimum product dimensions for length (lmin.), width (wmin.), and height (hmin.) following tolerances of the components
are valid:
lmin. = l - l, wmin. = w - w, and hmin. = h - h
• For products with pitch = 27.5 mm, w = l = h = 1.0 mm
• For products with pitch = 37.5 mm, w = l = h = 1.0 mm
• For products with pitch = 52.5 mm, w = l = h = 1.5 mm
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile we refer to the document “Soldering Guidelines for Film
Capacitors”: www.vishay.com/doc?28171
STORAGE TEMPERATURE
Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation.
RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS
Unless otherwise specified. all electrical values apply to an ambient temperature of 23 °C 1°C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % 2 %.
For reference testing. a conditioning period shall be applied over 96 hours 4 hours by heating the products in a circulating air
oven at the rated temperature and a relative humidity not exceeding 20 %.
Revision: 12-May-2021
Document Number: 26073
5
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F340X1 480VAC
Vishay BCcomponents
www.vishay.com
CHARACTERISTICS
Axis Title
Axis Title
10000
4
2
10000
1000
100
1000
100
10
Typical
220 nF
470 nF
1000 nF
1000
0
Maximum
1
-2
-4
-6
2200 nF
4700 nF
0.1
100
8200 nF
Minimum
0.01
0.001
10
10
100 000
-50
0
50
100
10
100
1000
10 000
Ambient Temperature (°C)
Frequency (kHz)
Capacitance as a function of ambient temperature
(typical curve)
Impedance as a function of frequency
(typical curve)
Axis Title
Axis Title
10 000
10000
1000
100
100
10
1
10000
1000
100
1000
100
10
C > 4.7 μF
220 nF
1.5 μF < C ≤ 3.9 μF
X1
0.22 μF < C ≤ 1.5 μF
1
8.2 μF
0.1
0.01
10
0.1
10
100 000
0.1
1
10
100
100
1000
10 000
Frequency (kHz)
Capacitance (nF)
Tangent of loss angle as a function of frequency
(typical curve)
Resonant frequency as a function of capacitance
(typical curve)
Axis Title
Axis Title
1000
100
10
10000
100 000
10000
4700 nF
2200 nF
8200 nF
220 nF
10 000
1000
100
10
1000
100
10
1000
100
10
470 nF
1000 nF
Tamb ≤ 110 °C
0.01 0.1
1
1
10
100
1
10
100
1000
Frequency (kHz)
Frequency (kHz)
Max. RMS voltage as a function of frequency
Max. RMS current as a function of frequency
Revision: 12-May-2021
Document Number: 26073
6
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F340X1 480VAC
Vishay BCcomponents
www.vishay.com
Axis Title
10000
1000
100
1 000 000
100 000
10 000
10
0
20
40
60
80
100
Ambient Temperature (°C)
Insulation resistance as a function of ambient temperature
(typical curve)
APPLICATION NOTES
• For X1 electromagnetic interference suppression in standard across the line applications (50 Hz / 60 Hz) with a maximum of
480 VAC rated voltage including fluctuation of the mains. It is recommended to use these components in a mains with
maximum nominal voltage of 400 VAC. Higher continuous applied voltages will shorten the life time
• For series impedance applications we refer to application note www.vishay.com/doc?28153
• To ensure withstanding high humidity requirements in the application the epoxy adhesion at the leads shall not be damaged.
Therefore the leads may not be damaged or not be bent before soldering
• For capacitors connected in parallel, normally the proof voltage must be reduced in function of the total parallel capacitance
value, see graph.
Axis Title
4000
3500
3000
2500
2000
1500
1000
500
10000
1000
100
0
10
0
2
4
6
8
10 12 14 16 18 20
Total Parallel Capacitance (μF)
Proof voltage as function of total parallel capacitance
• These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse
programs must be used
• The maximum ambient temperature must not exceed 105 °C
• Rated voltage pulse slope:
if the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 670 VDC and
divided by the applied voltage
Revision: 12-May-2021
Document Number: 26073
7
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F340X1 480VAC
Vishay BCcomponents
www.vishay.com
INSPECTION REQUIREMENTS
General Notes
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication
IEC 60384-14 ed-4 (2013) and Specific Reference Data”.
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1
4.1 Dimensions (detail)
As specified in chapters “General Data” of this
specification
Initial measurements
Capacitance
Tangent of loss angle:
for C 1 μF at 10 kHz
for C > 1 μF at 1 kHz
4.3 Robustness of terminations
4.4 Resistance to soldering heat
Tensile: load 10 N; 10 s
Bending: load 5 N; 4 x 90°
No visible damage
No pre-drying
Method: 1A
Solder bath: 280 °C 5 °C
Duration: 10 s
4.19 Component solvent resistance
4.4.2 Final measurements
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min 0.5 min
Recovery time: min. 1 h, max. 2 h
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| 5 % of the value measured initially
Tangent of loss angle
Increase of tan :
0.008 for: C 1 μF
0.005 for: C > 1 μF
Compared to values measured initially
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1B OTHER PART OF SAMPLE OF SUB-GROUP C1
Initial measurements
Capacitance
Tangent of loss angle:
for C 1 μF at 10 kHz
for C > 1 μF at 1 kHz
4.20 Solvent resistance of the marking
4.6 Rapid change of temperature
Isopropyl alcohol at room temperature
Method: 1
No visible damage
Legible marking
Rubbing material: cotton wool
Immersion time: 5 min 0.5 min
A = -40 °C
B = +105 °C
5 cycles
Duration t = 30 min
4.6.1 Inspection
4.7 Vibration
Visual examination
No visible damage
Mounting: see section “Mounting” of this
specification
Procedure B4:
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/sꢀ
(whichever is less severe)
Total duration 6 h
Revision: 12-May-2021
Document Number: 26073
8
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F340X1 480VAC
Vishay BCcomponents
www.vishay.com
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1B OTHER PART OF SAMPLE OF SUB-GROUP C1
4.7.2 Final inspection
Visual examination
No visible damage
4.9 Shock
Mounting: see section “Mounting” for more
information
Pulse shape: half sine
Acceleration: 490 m/sꢀ
Duration of pulse: 11 ms
4.9.2 Final measurements
Visual examination
Capacitance
No visible damage
|C/C| 5 % of the value measured initially
Tangent of loss angle
Increase of tan :
0.008 for: C 1 μF
0.005 for: C > 1 μF
Compared to values measured initially
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B
4.11 Climatic sequence
4.11.1 Initial measurements
Capacitance
Measured in 4.4.2 and 4.9.2
Tangent of loss angle:
measured initially in C1A and C1B
4.11.2 Dry heat
Temperature: 105 °C
4.11.3 Damp heat cyclic
Test Db
Duration: 16 h
First cycle
4.11.4 Cold
Temperature: -40 °C
4.11.5 Damp heat cyclic
Test Db
Duration: 2 h
remaining cycles
4.11.6 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| 5 % of the value measured in 4.11.1.
Tangent of loss angle
Increase of tan :
0.008 for: C 1 μF
0.005 for: C > 1 μF
Compared to values measured in 4.11.1.
Voltage proof
No permanent breakdown or flash-over
1900 VDC; 1 min between terminations
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification
Revision: 12-May-2021
Document Number: 26073
9
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F340X1 480VAC
Vishay BCcomponents
www.vishay.com
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C2
CONDITIONS
PERFORMANCE REQUIREMENTS
4.12
Damp heat steady state
56 days, 40 °C, 90 % to 95 % RH,
no load
4.12.1 Initial measurements
4.12.3 Final measurements
Capacitance
Tangent of loss angle:
for C 1 μF at 10 kHz
for C > 1 μF at 1 kHz
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| 5 % of the value measured in 4.12.1.
Tangent of loss angle
Increase of tan :
0.008 for: C 1 μF
0.005 for: C > 1 μF
Compared to values measured in 4.12.1.
Voltage proof
No permanent breakdown or flash-over
1900 VDC; 1 min between terminations
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C2A
4.12A Damp heat steady state with load
85 °C, 85 % RH, load: 480 VAC
Duration: 1000 h
4.12.1A Initial measurements
4.12.3A Final measurements
Capacitance
Tangent of loss angle:
for C 1 μF at 10 kHz
for C > 1 μF at 1 kHz
Visual examination
Capacitance
No visible damage
Legible marking
|C/C| 10 % of the value measured in
4.12.1A.
Tangent of loss angle
Increase of tan :
0.0240 for: C 1 μF at 10 kHz
0.0150 for: C > 1 μF at 1 kHz
Compared to values measured in 4.12.1A.
Voltage proof
No permanent breakdown or flash-over
1900 VDC; 1 min between terminations
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification
Revision: 12-May-2021
Document Number: 26073
10
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F340X1 480VAC
Vishay BCcomponents
www.vishay.com
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C3
CONDITIONS
PERFORMANCE REQUIREMENTS
4.13.1 Initial measurements
Capacitance
Tangent of loss angle:
for C 1 μF at 10 kHz
for C > 1 μF at 1 kHz
4.13 Impulse voltage
3 successive impulses, full wave, peak
voltage:
No self healing breakdowns or flash-over
X1: 4 kV for C 1 μF
4 kVC for C > 1 μF
Max. 24 pulses
4.14 Endurance
Duration: 1000 h
1.25 x URAC at 105 °C
Once in every hour the voltage is increased
to 1000 VRMS for 0.1 s via resistor of
47 5 %
4.14.7 Final measurements
Visual examination
Capacitance
No visible damage
Legible marking
|C/C| 10 % compared to values measured
in 4.13.1.
Tangent of loss angle
Increase of tan :
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured in 4.13.1
Voltage proof
No permanent breakdown or flash-over
1900 VDC; 1 min between terminations
2380 VAC; 1 min between terminations and
case
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C4
4.15 Charge and discharge
10 000 cycles
Charged to 670 VDC
Discharge resistance:
670 VDC
--------------------------------------
R =
1.5 x C (du/dt)
4.15.1 Initial measurements
4.15.3 Final measurements
Capacitance
Tangent of loss angle:
for C 1 μF at 10 kHz
for C > 1 μF at 1 kHz
Capacitance
|C/C| 10 % compared to values measured
in 4.15.1.
Tangent of loss angle
Increase of tan :
0.008 for: C 1 μF
0.005 for: C > 1 μF
Compared to values measured in 4.15.1
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification
Revision: 12-May-2021
Document Number: 26073
11
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F340X1 480VAC
Vishay BCcomponents
www.vishay.com
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C5
CONDITIONS
PERFORMANCE REQUIREMENTS
4.16 Radio frequency characteristic
Resonance frequency
0.9 times the value as specified in section
“Resonant Frequency” of this specification
SUB-GROUP C6
4.17 Passive flammability
Bore of gas jet: Ø 0.5 mm
Fuel: butane / propane
Test duration for actual volume V in mm3:
After removing test flame from capacitor,
the capacitor must not continue to burn for
more than 10 s. No burning particle must drop
from the sample.
Class B
Class B
V > 1750
60 s
One flame application:
12 mm
~ 8 mm
45.0 °
SUB-GROUP C7
4.18 Active flammability
20 cycles of 4 kV discharges on the test
capacitor connected to URAC
The cheese cloth around the capacitors shall
not burn with a flame.
No electrical measurements are required.
Revision: 12-May-2021
Document Number: 26073
12
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2021
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明