FP20214131001JKEGW [VISHAY]
Res Net,Thin Film,1K Ohms,100WV,5% +/-Tol,-100,100ppm TC,3825 Case;型号: | FP20214131001JKEGW |
厂家: | VISHAY |
描述: | Res Net,Thin Film,1K Ohms,100WV,5% +/-Tol,-100,100ppm TC,3825 Case 电阻器 |
文件: | 总3页 (文件大小:92K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FP200, FP201, FP202
www.vishay.com
Vishay Dale Thin Film
Hermetic Flat Pack Thin Film Resistor, Surface Mount Network
FEATURES
• Military/aerospace
• Hermetically sealed
Product may not
• Compliant to RoHS Directive 2002/95/EC
be to scale
• Halogen-free according to IEC 61249-2-21
definition
Note
* Pb containing terminations are not RoHS compliant, exemptions
may apply
Vishay Dale Thin Film offers a broad line of precision resistor
networks in hermetic Flat-Packs for surface mount
requirements in military, space or other harsh environmental
applications. These networks provide the long-term stability
necessary to insure continuous specification and
performance over the 20 years to 30 years life required for
space applications. The fabrication of these devices is
performed under tight procedural and environmental
controls to insure conformance to all 883C level H or K
requirements. Custom configurations, values and tolerance
combinations are available with fast turnaround.
SCHEMATICS
FP200
Number of Resistors
Number of Leads
Type Connection
Values Available
7, 8
14, 16
Isolated
500 to 100 k
1
FP201
FP202
Number of Resistors
Number of Leads
Type Connection
Values Available
12, 14
14, 16
Series
500 to 100 k
1
Number of Resistors
Number of Leads
Type Connection
Values Available
13, 15
14, 16
Common
500 to 100 k
1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
Passivated nichrome
CONDITIONS
Material
-
Pin/Lead Number
Resistance Range
TCR: Absolute
14, 16
10 to 1 M (total)
10 ppm/ꢀC to 50 ppm/ꢀC
5 ppm/ꢀC (standard)
0.05 % to 1 %
0.01 % to 0.1 %
100 mW
-
-
-
-
-
-
-
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
800 mW
R 0.05 %
70 ꢀC
2000 h at + 70 ꢀC
2000 h at + 70 ꢀC
R 0.015 %
-
100 V max. not to exceed P x R
- 55 ꢀC to + 125 ꢀC
- 55 ꢀC to + 150 ꢀC
-
-
-
-
-
-
Thermal EMF
-
-
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
R 0.01 %
R 0.002 %
1 year at + 25 ꢀC
1 year at + 25 ꢀC
Revision: 20-Oct-11
Document Number: 61073
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FP200, FP201, FP202
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches (millimeters)
14 LEAD
MINIMUM MAXIMUM
16 LEAD
MINIMUM MAXIMUM
FLAT-PAK FP200
DIMENSION
A
b
0.086 (2.18) 0.106 (2.69) 0.045 (1.14) 0.115 (2.92)
0.015 (0.38) 0.019 (0.48) 0.015 (0.38) 0.019 (0.48)
0.004 (0.10) 0.007 (0.18) 0.003 (0.08) 0.009 (0.23)
D
C
C
D
e
0.373 (9.47) 0.383 (9.73)
-
0.440 (11.18)
BSC
0.047 (1.19) 0.053 (1.35) 0.050 (1.27)
E
0.250 (6.35) 0.260 (6.60) 0.245 (6.22) 0.285 (7.24)
E
E1
E1
E2
E3
L
-
0.290 (7.37)
-
0.315 (8.00)
0.158 (4.01) 0.172 (4.37) 0.130 (3.30)
-
-
0.030 (0.76)
-
0.030 (0.76)
A
-
-
0.250 (6.35) 0.370 (9.40)
Q
S
0.026 (0.66)
-
0.26 (0.66)
-
0.045 (1.14)
0.045 (1.14)
-
-
0.045 (1.14)
Q
e
b
S1
S1
k
0.005 (0.13)
-
-
-
0.005 (0.13)
k
S
0.008 (0.20) 0.015 (0.38)
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: FP2001681001BFBCW
F
F
P
P
2
2
0
0
0
2
1
1
6
6
8
1
1
0
0
0
0
1
B
B
F
F
B
B
C
C
W
W
1
3
1
NUMBER OF
RESISTORS
(1 or 2 digits)
GLOBAL
MODEL
CASE
SIZE
OHMIC
VALUE
ABSOLUTE
TOLERANCE TOLERANCE
RATIO
ABSOLUTE
TCR
RATIO
TCR
PACKAGING
FP200
FP201
FP202
14
16
7
8
The first 3 digits
are significant
figures and the
A = 0.05 % B = 0.01 %
A = 10 ppm/ꢀC
B = 25 ppm/ꢀC
D = 50 ppm/ꢀC
E = 100 ppm/ꢀC G = 10 ppm
X = N/A
C = 2 ppm (1) W = WAFFLE
B = 0.1 %
C = 0.2 %
D = 0.5 %
F = 1 %
C = 0.025 %
D = 0.05 %
F = 0.1 %
H = 0.25 %
J = 0.5 %
K = 1 %
D = 3 ppm (1)
F = 5 ppm
100 min.,
1 mult
14
16
12
14
last
specifies
digit
the
number of zeros
to follow. “R”
designates the
decimal point.
Example:
G = 2 %
14
16
13
16
J = 5 %
K = 10 %
M = 20 %
X = Not
applicable
10R0 = 10
1000 = 100
1001 = 1000
Historical Part Number example: FP2001681002BFBC (for reference purposes only)
FP200
16
8
1002
B
F
B
C
NUMBER
OF LEADS
NUMBER OF
RESISTORS
ABSOLUTE
TOLERANCE
RATIO
TOLERANCE
ABSOLUTE
TCR
RATIO
TCR
MODEL
RESISTANCE
Note
(1)
Value dependent
Revision: 20-Oct-11
Document Number: 61073
2
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明