FRJ50 [VISHAY]
JUMPER, METAL FILM, 0 ohm - 0 ohm, THROUGH HOLE MOUNT, AXIAL LEADE, LEAD/ROHS COMPLIANT;型号: | FRJ50 |
厂家: | VISHAY |
描述: | JUMPER, METAL FILM, 0 ohm - 0 ohm, THROUGH HOLE MOUNT, AXIAL LEADE, LEAD/ROHS COMPLIANT 电阻器 |
文件: | 总3页 (文件大小:89K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
End of Life December-2018
FRJ
Vishay Dale
www.vishay.com
Metal Film Resistors,
Zero Ohm Jumper, Industrial
FEATURES
•
Provides low resistance circuit interconnections
• Color band marking for ease of identification
after mounting
Available
• Flame retardant coating
• Compatible with automatic insertion equipment
• Tape and reel packaging
• Material categorization:
Available
for definitions of compliance please see
www.vishay.com/doc?99912
Note
Product is End of Life Dec-2018
per PTN-DR-00011-2018, Rev 0
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
HISTORICAL
MODEL
MAXIMUM RESISTANCE VALUE
MAXIMUM CURRENT A
mΩ
10
AT + 25 °C
25
AT + 150 °C
FRJ50
FRJ-50
0
Note
•
DSCC has created a drawing to support the need for an axial-leaded zero-ohm jumper product. Vishay Dale is listed as a resource on this
drawing as follows:
DSCC
DRAWING
NUMBER
VISHAY DALE
MODEL
MAXIMUM RESISTANCE
MAXIMUM CURRENT RATING
A
mΩ
A-A-55502
FRJ50
10
5
•
This drawing can be viewed at: http://www.landandmaritime.dla.mil/Programs/MilSpec/ListDwgs.aspx?DocTYPE=DSCCdwg
TECHNICAL SPECIFICATIONS
PARAMETER
Insulation Resistance - Dry
Insulation Resistance - Wet
Category Temperature Range
UNIT
MΩ
MΩ
°C
FRJ50
10 000
100
-55 / +155
- Atmospheric
- Reduced
VRMS
VRMS
10-9/h
g
500
325
< 10
0.1
Dielectric Strength
Failure Rate
Weight
MATERIAL SPECIFICATIONS
Self extinguishing 10 s after flame
Insulation Flammability
Solder plated copper
Tin-plated copper or tin/lead plated copper
is removed
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: FRJ50R36 (preferred part numbering format)
F
R
J
5
0
R
3
6
GLOBAL MODEL
SPECIAL
PACKAGING
Lead (Pb)-free, T/R (5000 pieces)
E36 =
FRJ50
Blank = Standard
(Dash Number)
(up to 3 digits)
From 1 - 999
R36 = Tin/Lead, T/R (5000 pieces)
Historical Part Number example: FRJ-50 R36 (will continue to be accepted)
FRJ-50
as applicable
R36
HISTORICAL MODEL
PACKAGING
Note
For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544)
•
Revision: 17-Jul-2019
Document Number: 31016
1
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life December-2018
FRJ
Vishay Dale
www.vishay.com
DIMENSIONS in inches (millimeters)
FRJ50
0.152 + 0.00ꢀ - 0.022
(3.ꢀ6 + 0.20 - 0.56)
0.020 0.002
(0.51 0.05)
1.100 0.11ꢀ
(27.94 3.00)
0.062 0.010
(1.57 0.25)
MARKING
Single Black
Color Band
PACKAGING
Taped Lead and Reel Package
(52.4 mm inside tape spacing per EIA-296-E)
Notes
•
•
•
•
Quantity per reel: 5000 pieces in 5000-piece increments
A minimum of 12.0" (305 mm) bare tape leader shall be provided at each end of the reel
Paper separator protection between layers of components
Reel arbor hole is 1.25" (31.75 mm)
Revision: 17-Jul-2019
Document Number: 31016
2
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2019
Document Number: 91000
1
相关型号:
FRJA-408
Telecom and Datacom Connector, 8 Contact(s), Female, Right Angle, Solder Terminal, Jack
AMPHENOL
FRJA-408-02
Telecom and Datacom Connector, 16 Contact(s), Female, Right Angle, Solder Terminal, Jack
AMPHENOL
FRJA-408-04
Telecom and Datacom Connector, 32 Contact(s), Female, Right Angle, Solder Terminal, Jack
AMPHENOL
FRJA-408-06
Telecom and Datacom Connector, 48 Contact(s), Female, Right Angle, Solder Terminal, Jack
AMPHENOL
FRJA-418
Telecom and Datacom Connector, 8 Contact(s), Female, Right Angle, Solder Terminal, Jack
AMPHENOL
FRJA-418-02
Telecom and Datacom Connector, 16 Contact(s), Female, Right Angle, Solder Terminal, Jack
AMPHENOL
FRJA-418-03
Telecom and Datacom Connector, 24 Contact(s), Female, Right Angle, Solder Terminal, Jack
AMPHENOL
FRJA-418-04
Telecom and Datacom Connector, 32 Contact(s), Female, Right Angle, Solder Terminal, Jack
AMPHENOL
FRJA-418-06
Telecom and Datacom Connector, 48 Contact(s), Female, Right Angle, Solder Terminal, Jack
AMPHENOL
©2020 ICPDF网 联系我们和版权申明