FX5959G701T5 [VISHAY]
LED Driver, 1-Segment, PBGA25, BGA-25;![FX5959G701T5](http://pdffile.icpdf.com/pdf2/p00234/img/icpdf/FX5959G701T5_1370512_icpdf.jpg)
型号: | FX5959G701T5 |
厂家: | ![]() |
描述: | LED Driver, 1-Segment, PBGA25, BGA-25 |
文件: | 总11页 (文件大小:1240K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
FX5959G701
Vishay
Power LED Driver the Smallest and Low Profile,
Constant Current Source 0 - 2.0A, 2.5V to 7V, with 450W/in3
Power Density and High Efficiency
FEATURES
• Fully integrated Power LED driver
• High efficiency over large load range
• 100% duty cycle
• Power density - more than 450W/inch3
• 1µA shutdown current
•
Variable input voltage 2.5V to 6V (1Li+ or 3-cell NiCd or NiMH cells)
• Controlled output current
• Programmable PWM/PSM controls
• Low output ripple
• BGA construction
• Temperature range: - 40°C to + 85°C
• No external components required
• Output power 15W
• Maximum current 2.5A
• Short circuit protection
• Low profile
The FX5959 Current Source is available in 25-ports BGA
package. In order to satisfy the stringent ambient
temperature requirements, the Current Source is designed
to handle the industrial temperature range of - 40°C to 85°C.
The Power LED Driver is dedicated for optimum
performance to drive Power LED’s. FX5959 is a complete
system solution for all Power LED’s with high current for e.g.
> 300mA. The driver provides a constant current without
exceeding the applicable LED voltage to ensure the
specified LED load life time. The integrated Current Source
provides flexibility of utilizing various battery configurations
and chemistries such as NiCd, NiMH, or Li+ with input
voltage range of 2.5v to 6v. An additional flexibility is
provided by using external resistors to adapt to various
voltage input levels and LED configurations. For ultra-high
efficiency, the Power LED Driver is designed to operate in
synchronous rectified PWM mode under full load while
transforming into externally controlled pulse-skipping mode
(PSM) under light load (e.g. for LED’s with 20 to 200mA).
APPLICATION
• Bike lamps
• Headlights and flashlights
• Medical instrumentation
• General and emergency/alarm lighting
• Design and architectural lighting
• Interior and runway lights
• Outdoor accent lighting
• Household appliances
ORDERING INFORMATION
FX
5959
G701
ADJ
FUNCTION
SIZE
CIRCUIT IDENTIFIER
OUTPUT VOLTAGE - ADJ for adjustable version - self selectable output voltage. (see note below)
PACKAGING - B1 = 10pcs in bulk; B5 = 50pcs in bulk; T5 = 500pcs in 13” ree.
For lead (Pb)-free solder please add E2 suffix.
* Note: for fixed output current please contact FunctionPAK@vishay.com
Document Number: 10135
Revision: 18-Jan-05
For technical questions, contact FunctionPAK@vishay.com
For marketing questions, contact FunctionPAK.marketing@vishay.com
www.vishay.com
75
FX5959G701
Vishay
L
DIMENSIONS in inches [millimeters]
B
0.59 0.01
A
L
[15 0.25]
L
0.1 0.01
[2.54 0.25]
A
0.95 0.01
[2.29 0.25]
B
B
A
0.126 max
[3.2 max]
T
BGA
0.03 0.001
[0.762 0.025]
T
Ball Diameter
R1
R0
R1
V
TP
R0
VL
Vin
SD
PWM/PSM
SYNC
GND
PIN CONFIGURATION*
UPPER SIDE
PIN
CONNECTION
4, 5
Vin
SD*
21 22 23 24 25
16 17 18 19 20
11 12 13 14 15
9, 14
10, 15
20, 25
PWM/PSM*
6
1
7
2
8
3
9
4
10
5
SYNC*
GND
1-3, 7, 8,
13, 18, 23
19, 24
21, 22
R1ext
VTP
*Note: must be connected to Vin.
16, 17
R0ext
Load
6, 11, 12
RECOMMENDED PAD PATTERN in inches [millimeters]
25
D
A
D
F
A
F
0.1 0.01
[2.54 0.25]
0.03 0.001
[0.8 0.02]
0.02 0.001
[0.5 0.02]
1
A
www.vishay.com
76
For technical questions, contact FunctionPAK@vishay.com
For marketing questions, contact FunctionPAK.marketing@vishay.com
Document Number: 10135
Revision: 18-Jan-05
FX5959G701
Vishay
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
UNIT
CONDITION
MIN
TYP
MAX
Input
Voltage Range
Quiescent Current
Soft Start Time
VDC
µA
ms
ms
ms
2.5
6.0
PSM mode
SS for Vout = 6.0V
SS for Vout = 5.0V
200
22
22
T
T
TSS for Vout = 3.3V
19
SD, PWM/PSM,SYNC
Logic High
Logic Low
V
V
VH
VL
2.4
0.8
750
250
1
Normal Mode
PSM Mode
Shutdown Mode
Shutdown Time
µA
µA
µA
ms
ms
ms
IDD
IDD
IDD
T
SS for Vout = 6.0V
15
14
14
TSS for Vout = 5.0V
T
SS for Vout = 3.3V
60Hz 60sec
ISO = 500 VDC
VISO = 500 VDC
Insulation
Test Voltage
Resistance
Leakage Current
Output
VAC
Ω
nA
750
1 x 1011
V
5
(VTP - VL) LOUT
W
W
at 25 °C Ambient Temperature
at 85 °C Ambient Temperature
1.5
0.8
Power
Voltage
Current Tolerance
Temp. Coefficient
Ripple and Noise
General
W
VDC
%
%/°C
mVpp
15
10
45
7
at 25 °C Ambient Temperature
DC to 20 MHz
0.03
Package Weight
Oscillator
Frequency
SYNC Range
Temperature
Operation
gr.
1.65
1.5
KHz
670
F
SYNC/FOSC
1.2
°C
°C
- 40
- 55
+ 85
+ 125
Storage
Operating Junction Temp.
Thermal Impedance
°C
Tj
150
82
°C/WD*
θJA
*Note: WD = Power Dissipated
Rise Time
Fall Time
Rise Time (PWM mode): Vin = 3V; VTP= 3.3V; lout = 2.5A
Fall Time (PWM mode): Vin = 3V; VTP = 3.3V; lout = 2.5A
Document Number: 10135
Revision: 18-Jan-05
For technical questions, contact FunctionPAK@vishay.com
For marketing questions, contact FunctionPAK.marketing@vishay.com
www.vishay.com
77
FX5959G701
Vishay
Rise Time
Fall Time
Fall Time (PWM mode): Vin = 4.5V; VTP = 5V; lout = 2A
Rise Time (PWM mode): Vin = 4.5V; VTP= 5V; lout = 2A
Fall Time (PWM mode): Vin = 3.5V; VTP = 5V; lout = 2A
Fall Time (PWM mode): Vin = 3V; VTP = 3.3V; lout = 2A
Fall Time (PWM mode): Vin = 5V; VTP = 6V; lout = 1A
Rise Time (PWM mode): Vin = 3.5V; VTP = 5V; lout = 2A
Rise Time (PWM mode): Vin = 3V; VTP = 3.3V; lout = 2A
Rise Time (PWM mode): Vin = 5V; VTP = 6V; lout = 1A
www.vishay.com
78
For technical questions, contact FunctionPAK@vishay.com
For marketing questions, contact FunctionPAK.marketing@vishay.com
Document Number: 10135
Revision: 18-Jan-05
FX5959G701
Vishay
Rise Time
Fall Time
Rise Time (PWM mode): Vin = 4V; VTP = 6V; lout = 1A
Fall Time (PWM mode): Vin = 4V; VTP = 6V; lout = 1A
Rise Time (PWM mode): Vin = 4.5V; VTP = 5V; lout = 1A
Rise Time (PWM mode): Vin = 3.5V; VTP = 5V; lout = 1A
Rise Time (PWM mode): Vin = 3V; VTP = 3.3V; lout = 1A
Fall Time (PWM mode): Vin = 4.5V; VTP = 5V; lout = 1A
Fall Time (PWM mode): Vin = 3.5V; VTP = 5V; lout = 1A
Fall Time (PWM mode): Vin = 3V; VTP = 3.3V; lout = 1A
Document Number: 10135
Revision: 18-Jan-05
For technical questions, contact FunctionPAK@vishay.com
For marketing questions, contact FunctionPAK.marketing@vishay.com
www.vishay.com
79
FX5959G701
Vishay
PWM MODE FOR 6V LED
PWM MODE FOR 3.2V LED
www.vishay.com
80
For technical questions, contact FunctionPAK@vishay.com
For marketing questions, contact FunctionPAK.marketing@vishay.com
Document Number: 10135
Revision: 18-Jan-05
FX5959G701
Vishay
PWM MODE 2.8V LED
Document Number: 10135
Revision: 18-Jan-05
For technical questions, contact FunctionPAK@vishay.com
For marketing questions, contact FunctionPAK.marketing@vishay.com
www.vishay.com
81
FX5959G701
Vishay
PIN DESCRIPTION
R1
R0
R1
VTP
R0
VL
Vin
SD
PWM/PSM
SYNC
GND
DESCRIPTION
PIN
SD
Logic low on SD pin shuts down the Current Source completely and decreases current consumption to less than 1uA
Logic high =PWM mode, logic low =PSM mode. In PSM mode synchronous rectification is disabled.
PWM/PSM
SYNC
Vin
Externally controlled synchronization signal. Logic high to low transition forces the clock synchronization.
If not used must be connected to Vin or logic high.
Input supply voltage
GND
R1
Ground
Included inside the package for fixed voltage. To be added externally for all self-selected voltages.
Voltage test point. To test the minimum gap above VL.
To be added externally for selected output current.
Output current. LED connection
VTP
R0
VL
www.vishay.com
82
For technical questions, contact FunctionPAK@vishay.com
For marketing questions, contact FunctionPAK.marketing@vishay.com
Document Number: 10135
Revision: 18-Jan-05
FX5959G701
Vishay
DEMONSTRATION BOARD
TEST SET-UP AND OPERATION
Pins SD (Shut Down), PWM and SYNC (Synchronization) are
internally connected on the demo board to Vin.
1. Connect the DB according to the circuit drawing below
without connecting the LED
2. Use DC power supply, with current capability of twice the
output current.
3. Adjust VTP with R1 trimmer to a typical voltage of 0.6V above
the VL (LED voltage).
4. Connect the LED or equivalent resistor value according to
the circuit drawing below and adjust R0 trimmer to the
required current.
5. Input voltage can be adjusted between 2.5V to VTP.
1.223in
(31.07 mm)
0.332 in
RECOMMENDED BOARD LAYOUT
8.44 mm)
0.1 in (2.54 mm)
Ø Drill size
R
0
0.040 10 (1.02 mm)
8
1
5
4
Current Adjust
0.1 in (2.54 mm)
1.13 in
(28.7 mm)
Ø Pad Recommended 0.060 in
Ø0.105 in
(2.66 mm)
R0
R1
Ø0.105 in
(2.66 mm)
Standard Strip 0.1" (2.54 mm) Centers,
Double Row
0.1 in
(2.54 mm)
All Positions Filled
0.23in
(5.84 mm)
0.31 in
(7.9 mm)
0.1 in
(2.54 mm)
PIN (0.64 mm)
PIN No: Description
1
2
3
4
5
6
7
8
GND
V
L
GND
Vin
Vin
View from bottom side
V
PIn 1
GND
V
L
TP
R1
R0
R1
VTP
R0
VL
Vin
SD
A
PWM/PSM
SYNC
+
-
V
GND
FX5959G701ADJ Demo Board
Document Number: 10135
Revision: 18-Jan-05
For technical questions, contact FunctionPAK@vishay.com
For marketing questions, contact FunctionPAK.marketing@vishay.com
www.vishay.com
83
FX5959G701
Vishay
SOLDERING PROFILE
All of the components must be dried prior to assembly as follows:
1.Samples and package type B1 and B5, bulk components - the recommended drying process is to be done at 125°C for 48 hours.
2. For package type T1 and T2 - per JEDEC J-STD-033 level5.
For taped components the recommended drying process is to be done at maximum 70°C.
RECOMMENDED SOLDERING PROFILE
217°C/sec
250
200
Max
2.5°C/sec
Max
0.5-1°C/sec
Time above
liquidus
30-90sec
150
30-60sec
Pre-Heating
zone
0.5-2.5°C/sec
100
50
0
300
50
100
150
Time (sec)
200
250
RECOMMENDED LEAD (PB)-FREE SOLDERING PROFILE
+ 0°C
235°C
250
- 5°C
200
2.5°C/sec
Max
Time above
0.5-1°C/sec
liquidus
30-90sec
150
30-60sec
Pre-Heating
zone
0.5-2.5°C/sec
100
50
0
350
400
50
100
150
200
250
300
Time (sec)
www.vishay.com
84
For technical questions, contact FunctionPAK@vishay.com
For marketing questions, contact FunctionPAK.marketing@vishay.com
Document Number: 10135
Revision: 18-Jan-05
FX5959G701
Vishay
TAPE AND REEL INFORMATION
PER STANDARD EIA-481-2-A
(REVISION OF 481-2 AND INCLUSION OF EIA-481-3)
20.00 + 0.10
2.00 + 0.10
Ø 1.50 + 0.10
4.00 + 0.10
1.75 + 0.10
11.50 + 0.10
24.00 + 0.30
– 0.10
Ø 1.50 + 0.25
0.356 + 0.013
8° MAX
4° MAX
15.80 + 0.10
15.75 + 0.10
3.80 + 0.10
Ao
Ko
Bo
W3
W2
N1
N
L
Q
M
W1
T5 - 13’’ REEL DIMENSIONS in millimeters
DIMENSION
MIN
MAX
L
330
M
12.8
20.2
1.5
13.2
N
N1
Q
100
24.4
W1
W2
W3
26.4
30.4
27.4
Document Number: 10135
Revision: 18-Jan-05
For technical questions, contact FunctionPAK@vishay.com
For marketing questions, contact FunctionPAK.marketing@vishay.com
www.vishay.com
85
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00295/img/page/FX5-60P-SH09_1786764_files/FX5-60P-SH09_1786764_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00295/img/page/FX5-60P-SH09_1786764_files/FX5-60P-SH09_1786764_2.jpg)
FX5M1-100P-DSL(70)
Board Connector, 100 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,
HRS
![](http://pdffile.icpdf.com/pdf2/p00295/img/page/FX5-60P-SH09_1786764_files/FX5-60P-SH09_1786764_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00295/img/page/FX5-60P-SH09_1786764_files/FX5-60P-SH09_1786764_2.jpg)
FX5M1-100S-SVL(94)
Board Connector, 100 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal,
HRS
![](http://pdffile.icpdf.com/pdf2/p00295/img/page/FX5-60P-SH09_1786764_files/FX5-60P-SH09_1786764_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00295/img/page/FX5-60P-SH09_1786764_files/FX5-60P-SH09_1786764_2.jpg)
FX5M1-120P-DSL(70)
Board Connector, 120 Contact(s), 2 Row(s), Male, Right Angle, 0.039 inch Pitch, Solder Terminal, Locking, Beige Insulator, Receptacle,
HRS
![](http://pdffile.icpdf.com/pdf2/p00220/img/page/FX6A-40S-0-8_1281827_files/FX6A-40S-0-8_1281827_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00220/img/page/FX6A-40S-0-8_1281827_files/FX6A-40S-0-8_1281827_2.jpg)
FX6-100P-0.8SV(22)
Board Connector, 100 Contact(s), 2 Row(s), Male, Straight, 0.031 inch Pitch, Surface Mount Terminal, Brown Insulator, Receptacle
HRS
![](http://pdffile.icpdf.com/pdf2/p00220/img/page/FX6A-40S-0-8_1281827_files/FX6A-40S-0-8_1281827_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00220/img/page/FX6A-40S-0-8_1281827_files/FX6A-40S-0-8_1281827_2.jpg)
FX6-100P-0.8SV1(22)
Board Connector, 100 Contact(s), 2 Row(s), Male, Straight, 0.031 inch Pitch, Surface Mount Terminal, Brown Insulator, Receptacle
HRS
![](http://pdffile.icpdf.com/pdf2/p00234/img/page/FX6-100P-0-8_1370514_files/FX6-100P-0-8_1370514_1.jpg)
FX6-100P-0.8SV1(71)
Board Stacking Connector, 100 Contact(s), 2 Row(s), Straight, 0.031 inch Pitch, Surface Mount Terminal, Locking, Brown Insulator, Receptacle,
HRS
©2020 ICPDF网 联系我们和版权申明