HE5C543K025AZSS [VISHAY]
Wet Tantalum Capacitors, High Energy, Ultra High Capacitance;
| 型号： | HE5C543K025AZSS |
| 厂家： | 
VISHAY |
| 描述： | Wet Tantalum Capacitors, High Energy, Ultra High Capacitance |
| 文件： | 总5页 (文件大小：108K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HE5
Vishay
www.vishay.com
Wet Tantalum Capacitors, High Energy,
Ultra High Capacitance, -55 °C to +125 °C Operation
FEATURES
• High energy, very high capacitance design
• All tantalum, hermetically sealed case
• Utilizes Vishay proven SuperTan® technology
• Terminations: radial leaded
Available
Available
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
APPLICATIONS
• Industrial
• Avionics / military / space
PERFORMANCE CHARACTERISTICS
Operating Temperature:
DC Leakage Current (DCL Max.):
-55 °C to +85 °C (to +125 °C with voltage derating)
at +25 °C: leakage current shall not exceed the values listed
in the Standard Ratings tables.
Capacitance Tolerance:
at 120 Hz, +25 °C 20 ꢀ standard
10 ꢀ available as special
Life Test:
capacitors are capable of withstanding a 2000 h life test at
a temperature of +85 °C at the applicable rated DC working
voltage.
Contact marketing for availability of 10 % tolerance
ORDERING INFORMATION
HE5
C
543
K
025
B
Z
S
S
TYPE
CASE
CODE
CAPACITANCE CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING AT +85 °C
TERMINATION
RELIABILITY TEMPERATURE
LEVEL
ESR
See
Ratings
and Case
Codes
table
This is
K = 10 ꢀ (1)
M = 20 ꢀ
This is expressed
in V. To complete
the three-digit
block, zeros
A = 100 ꢀ tin
(RoHS-compliant)
B = tin / lead
C = 100 ꢀ tin
(RoHS-compliant)
with mounting
lugs
Z = non-ER
S = standard
(-55 °C to
+85 °C)
S =
standard
expressed in
microfarads.
The first two
digits are
the significant
figures. The
third is the
precede the
voltage rating.
A decimal point
is indicated by
an “R”
D = tin / lead with
mounting lugs
number of
zeros to follow.
(6R3 = 6.3 V)
Note
(1)
Contact marketing for availability of 10 ꢀ tolerance
Revision: 23-Mar-2021
Document Number: 42104
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HE5
Vishay
www.vishay.com
DIMENSIONS in inches [millimeters]
T
0.800
0.800
Ø 1.400 0.005
0.500 min.
negative
0.22
Ø 0.040 0.002 negative lead
0.230 0.030
positive
0.230 0.030
0.22
positive
2-56 thread
Ø 0.064 0.003 positive lead
Case height
L2
(MIN.)
L1
(MIN.)
WEIGHT (g)
(TYPICAL)
CASE CODE
D
HEIGHT
T
1.400 0.005
[35.56 0.127]
0.350 0.015
[8.89 0.381]
0.500
[12.70]
0.500
[12.70]
0.40 0.015
[10.2 0.38]
A
B
C
48.0
73.0
95.0
1.400 0.005
[35.56 0.127]
0.488 0.015
[12.395 0.381]
0.500
[12.70]
0.500
[12.70]
0.40 0.015
[10.2 0.38]
1.400 0.005
[35.56 0.127]
0.608 0.015
[15.4 0.4]
0.500
[12.70]
0.500
[12.70]
0.40 0.015
[10.2 0.38]
STANDARD RATINGS
MAX. ESR
MAX. DCL
AT +25 °C
(μA)
CAPACITANCE
(μF)
CASE
CODE
PART NUMBER
AT +25 °C, 1 kHz
(Ω)
25 VDC AT +85 °C; 15 VDC AT +125 °C
HE5A183(1)025(2)(3)(4)(5)
HE5A243(1)025(2)(3)(4)(5)
HE5B363(1)025(2)(3)(4)(5)
HE5B483(1)025(2)(3)(4)(5)
HE5C543(1)025(2)(3)(4)(5)
HE5C723(1)025(2)(3)(4)(5)
50 VDC AT +85 °C; 30 VDC AT +125 °C
HE5A802(1)050(2)(3)(4)(5)
HE5B143(1)050(2)(3)(4)(5)
HE5B163(1)050(2)(3)(4)(5)
HE5C183(1)050(2)(3)(4)(5)
HE5C243(1)050(2)(3)(4)(5)
63 VDC AT +85 °C; 40 VDC AT +125 °C
HE5A402(1)063(2)(3)(4)(5)
HE5B802(1)063(2)(3)(4)(5)
HE5C113(1)063(2)(3)(4)(5)
HE5C123(1)063(2)(3)(4)(5)
80 VDC AT +85 °C; 50 VDC AT +125 °C
HE5A302(1)080(2)(3)(4)(5)
HE5B562(1)080(2)(3)(4)(5)
HE5B602(1)080(2)(3)(4)(5)
HE5C702(1)080(2)(3)(4)(5)
HE5C902(1)080(2)(3)(4)(5)
18 000
24 000
36 000
48 000
54 000
72 000
A
A
B
B
C
C
0.050
0.060
0.045
0.045
0.035
0.035
150
150
200
200
300
350
8000
A
0.075
0.045
0.045
0.035
0.035
170
270
270
400
400
14 500
16 000
18 000
24 000
B
B (2)
C (1)
C (2)
4000
8000
A
B
0.100
0.055
0.035
0.035
170
270
400
400
11 500
12 000
C
C (2)
3000
5600
6000
7000
9000
A
0.100
0.065
0.065
0.040
0.040
200
350
350
500
500
B
B (2)
C (1)
C (2)
Notes
•
Part number definitions:
(1) Standard capacitance tolerance is 20 ꢀ or “M“. Contact marketing for availability of 10 ꢀ or “K“
(2) Standard termination is “B” (tin / lead) or “D” (tin / lead with mounting lugs). RoHS-compliant is “A” (100 ꢀ tin) or “C” (100 ꢀ tin with
mounting lugs)
(3) Standard reliability is “Z” or non-established reliability
(4) Standard temperature range is “S” or -55 °C to +125 °C
(5) Standard ESR is “S“
Preliminary rating, specification subject to change. Contact marketing for availability
Requires export license for shipments outside the US. Contact marketing for availability
(1)
(2)
Revision: 23-Mar-2021
Document Number: 42104
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HE5
Vishay
www.vishay.com
STANDARD RATINGS
MAX. ESR
AT +25 °C, 1 kHz
(Ω)
MAX. DCL
AT +25 °C
(μA)
CAPACITANCE
(μF)
CASE
CODE
PART NUMBER
100 VDC AT +85 °C; 65 VDC AT +125 °C
HE5A192(1)100(2)(3)(4)(5)
1900
3600
3800
4500
5700
A
0.085
0.065
0.065
0.050
0.050
200
350
350
500
500
B
HE5B362(1)100(2)(3)(4)(5)
B (2)
C (1)
C (2)
HE5B382(1)100(2)(3)(4)(5)
HE5C452(1)100(2)(3)(4)(5)
HE5C572(1)100(2)(3)(4)(5)
110 VDC AT +85 °C; 65 VDC AT +125 °C
HE5A152(1)110(2)(3)(4)(5)
1500
3000
3600
4500
A
0.100
0.085
0.075
0.075
200
350
500
500
B
HE5B302(1)110(2)(3)(4)(5)
C (1)
C (2)
HE5C362(1)110(2)(3)(4)(5)
HE5C452(1)110(2)(3)(4)(5)
125 VDC AT +85 °C; 85 VDC AT +125 °C
HE5A112(1)125(2)(3)(4)(5)
1100
2200
2900
3300
A
0.100
0.085
0.075
0.075
200
350
500
500
B
HE5B222(1)125(2)(3)(4)(5)
C (1)
C (2)
HE5C292(1)125(2)(3)(4)(5)
HE5C332(1)125(2)(3)(4)(5)
Notes
•
Part number definitions:
(1) Standard capacitance tolerance is 20 ꢀ or “M“. Contact marketing for availability of 10 ꢀ or “K“
(2) Standard termination is “B” (tin / lead) or “D” (tin / lead with mounting lugs). RoHS-compliant is “A” (100 ꢀ tin) or “C” (100 ꢀ tin with
mounting lugs)
(3) Standard reliability is “Z” or non-established reliability
(4) Standard temperature range is “S” or -55 °C to +125 °C
(5) Standard ESR is “S“
Preliminary rating, specification subject to change. Contact marketing for availability
Requires export license for shipments outside the US. Contact marketing for availability
(1)
(2)
PERFORMANCE CHARACTERISTICS OF HIGH ENERGY CAPACITORS
ELECTRICAL PERFORMANCE CHARACTERISTICS
ITEM
PERFORMANCE CHARACTERISTICS
-55 °C to +85 °C (to +125 °C with voltage derating)
-62 °C to +130 °C
Operating temperature range
Storage temperature range
Capacitor tolerance
ESR
20 ꢀ 10 ꢀ at 120 Hz
Limits per Standard Ratings table
DC leakage current (DCL max.)
Reverse voltage
At 25 °C the leakage current shall not exceed values listed in the Standard Rating table.
No continuous reverse voltage permitted
The test shall be at 1000 cycles at 110 ꢀ of rated voltage at 85 °C. A cycle consists of a 30 s
charge and a 330 s discharge through 100 Ω resistor.
Surge voltage
Life test
2000 h at +85 °C
ENVIRONMENTAL CHARACTERISTICS
ITEM
TEST AND CONDITIONS
MIL-STD-202, method 112 C/IIIa
MIL-STD-202, method 106
COMMENTS
The capacitor shall be hermetically sealed such that the case does not leak
electrolyte or vent any gas when exposed to a vacuum.
Hermeticity
Moisture resistance
Altitude
6 V polarity
MIL-STD-202, method 105 C,
test condition D
100 000 feet test
Revision: 23-Mar-2021
Document Number: 42104
3
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HE5
Vishay
www.vishay.com
MECHANICAL PERFORMANCE CHARACTERISTICS
ITEM
TEST AND CONDITIONS
COMMENTS
Thermal shock
MIL-STD-202, method 107 G
Test condition A
MIL-STD-202, method 213 B
test condition G
Shock
11 ms, 50 g
MIL-STD-202, method 204 D
test condition D
Vibration - high frequency
Vibration - random
12 sweeps/axis, 20 g peak
1.5 h/axis, 12 g
MIL-STD-202, method 214 A
test condition I, letter D
The capacitor must withstand solder dipping of the terminals at 260 °C
for 10 s. The capacitor must not be visibly damaged and the electrical
characteristics must not be affected.
Resistance to solder heat MIL-STD-202, method 210 F
Solderability
MIL-STD-202, method 208
MIL-STD-202, method 211 A
The capacitor terminals must withstand a 5 pound pull test for 5 s to 10 s.
The capacitor must not be visibly damaged and the electrical
characteristics must not be affected.
Terminal strength
The capacitor shall be permanently and legibly marked on the
circumference of the case. The markings shall be resistant to solvents.
Part markings
MIL-STD-202, method 215 J
Weight (mass)
Seal
See dimensions table
MIL-PRF-39006
J-STD-033
MSL
Not applicable
Packaging
MIL-PRF-39006
All units are shipped in individual bulk packages
Tighten nuts only ½ to ¾ turn beyond point of initial contact, equivalent to
24 to 28 maximum inch-ounces torque. Maximum pre-load tension
~ 15 pounds.
Lock washers are not recommended; use an adhesive lock nut
conforming to MIL-S-22473E, grade A - red
Stud mounting
Revision: 23-Mar-2021
Document Number: 42104
4
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2021
Document Number: 91000
1
相关型号：
©2020 ICPDF网 联系我们和版权申明