HTRN50-1T3 [VISHAY]
Thin Film Surface Mount, Dual-In-Line Resistor Network;型号: | HTRN50-1T3 |
厂家: | VISHAY |
描述: | Thin Film Surface Mount, Dual-In-Line Resistor Network |
文件: | 总3页 (文件大小:94K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HTRN
Vishay Dale Thin Film
www.vishay.com
Molded, 50 mil Pitch, High Temperature (215 °C);
Thin Film Surface Mount, Dual-In-Line Resistor Network
FEATURES
• Ratio tolerance to 0.05 ꢀ
• Ratio stability 0.1 ꢀ
• - 55 °C to 215 °C operating temperature range
• 0.068" (1.73 mm) maximum seated height
• Rugged molded case construction with no
internal solder
• Low temperature coefficient ( 25 ppm/°C)
• JEDEC MS-012 STD variation AA package
• Gold terminations for durable attach bonds
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21 definition
TYPICAL PERFORMANCE
HTRN series resistor networks feature four isolated resistors
with standard 50 mil pitch lead spacing. HTRN is ideal to be
used in oil/gas exploration industry, automotive under the
hood applications, and aerospace engine control high
temperature applications. The networks feature close TCR
tracking and tight ratio tolerance and are ideally suited for
unity gain operational amplifier circuitry. The standard
resistance offering listed are available for immediate
delivery.
ABSOLUTE
25
TRACKING
5
TCR
TOL.
ABSOLUTE
0.1
RATIO
0.05
STANDARD RESISTANCE OFFERING (R1/R2)
RATIO
R1
R2
SCHEMATIC
100:1
50:1
25:1
20:1
10:1
5:1
100K
50K
25K
20K
10K
10K
10K
4K
1K
1K
1K
1K
1K
2K
5K
1K
8
7
6
5
R1
R2
R2
R1
2:1
4:1
Note
Consult factory for additional values and schematics
1
2
3
4
•
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
SPECIFICATIONS
Passivated nichrome
8
CONDITIONS
-
-
1000 to 100 k per resistor
25 ppm/°C
-
- 55 °C to + 125 °C
TCR: Tracking
5 ppm/°C
- 55 °C to + 125 °C
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
0.1 ꢀ
0.05 ꢀ
100 mW
400 mW
R 0.5 ꢀ
R 0.1 ꢀ
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 215 °C at 25 ꢀ rated power
2000 h at + 215 °C at 25 ꢀ rated power
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
0.1 ppm/V (typical)
100 V max. not to exceed P x R
- 55 °C to + 215 °C
- 55 °C to + 215 °C
< - 30 dB
-
-
-
-
-
Thermal EMF
0.08 μV/°C
-
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
R 0.01 ꢀ
R 0.002 ꢀ
1 year at + 25 °C
1 year at + 25 °C
Revision: 12-Dec-11
Document Number: 60111
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HTRN
Vishay Dale Thin Film
www.vishay.com
DIMENSIONS AND IMPRINTING in inches and millimeters
DIMENSION
INCHES
MILLIMETERS
3.99
E
B
Resistance
Value Code
A
B
C
D
E
F
0.157
0.0165 0.0025
0.050
C
0.4 0.06
1.27
F
HTRN
x x x x
A
0.195 max.
0.008 0.001
0.028 0.001
0.239 0.005
0.068 max.
0.008 0.002
2° to 6°
4.93
G
0.20 0.03
0.71 0.02
6.07 0.13
1.73
Date
Code
ø
D
G
H
I
H
Seating
Plane
0.22 0.06
2° to 6°
I
Ø
Note
• Marking - Vishay symbol, part number from ordering information
MECHANICAL SPECIFICATIONS
DERATING CURVE
100
Resistive Element
Substrate Material
Body
Passivated nichrome
100 % = 0.40 W
75
50
25
Silicon
Molded epoxy
Copper
Terminals
0
0
70
215
Termination Finish
Plated Ni/Pd/Au
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: HTRN5-1UF
H
T
R
N
5
-
1
U
F
GLOBAL MODEL
(4 digits)
RESISTANCE
(3, 4 or 5 digits)
PACKAGING
HTRN
2-1
4-1
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 3000
5-1
10-1
20-1
25-1
50-1
100-1
TS = 100 min., 1 mult
UF = TUBED
Revision: 12-Dec-11
Document Number: 60111
2
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号:
HTRT100V221MTA13X31
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 220uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
MERITEK
HTRT10V222MTA13X31
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 2200uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
MERITEK
HTRT35V102MTA13X31
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
MERITEK
HTS
High Ohmic Values (up to 100 Gï), High Voltage Resistors (up to 50 kV) Thick Film Technology
VISHAY
©2020 ICPDF网 联系我们和版权申明