HVCC203Y6P331
更新时间:2024-09-18 23:22:32
品牌:VISHAY
描述:High Voltage Ceramic Capacitors Radial-Leaded Singlelayer Disc
HVCC203Y6P331 概述
High Voltage Ceramic Capacitors Radial-Leaded Singlelayer Disc
HVCC203Y6P331 数据手册
通过下载HVCC203Y6P331数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载HVCC Series
Vishay Roederstein
www.vishay.com
High Voltage Ceramic Capacitors
Radial-Leaded Singlelayer Disc
FEATURES
• Ceramic singlelayer DC disc / AC disc capacitor
• High reliability
• High capacitance values up to 2 nF
• Small sizes
• Low losses
• Radial leads
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
OPTIONS (on request)
•
10 ꢀ tolerance on nominal C-value
LINKS TO ADDITIONAL RESOURCES
• Customized lead styles
3
D
3D Models
Related
Documents
Why It
Matters
Capabilities and
Custom Options
Did You
Know?
APPLICATIONS
• High voltage power supplies for x-ray sources and pulsed
lasers
Infographics
• Baggage scanner
• Medical x-ray
QUICK REFERENCE DATA
DESCRIPTION
Ceramic class
• Industrial laser
• Airpurifier / ionizer
VALUE
2
Ceramic dielectric
Temperature coefficient of
capacitance
Y6P
DESIGN
10 ꢀ within -30 °C to +105 °C
The capacitors consist of a ceramic disc of which both sides
are silver-plated. Connection leads are made of tinned
copper clad steel wire having diameters of 0.026" (0.65 mm)
and 0.032" (0.80 mm).
Voltage (Urated, DC
)
10 000
100
15 000
100
20 000
100
Min. capacitance (pF)
Max. capacitance (pF)
Capacitance tolerance
Max. dissipation factor (ꢀ)
Min. insulation resistance (GΩ)
Operating temperature (°C)
Mounting
2000
2000
20 ꢀ
1.5
1000
The capacitors may be supplied with straight leads having
lead spacing of 0.37" (9.5 mm) and 0.49" (12.5 mm).
Coating is made of flame retardant epoxy resin in
accordance with “UL 94 V-0”.
200
-30 to +105
Radial
CAPACITANCE RANGE
100 pF to 2000 pF
RATED VOLTAGE
Urated, AC = Urated, DC/2.8 at 50 Hz / 60 Hz
DIELECTRIC STRENGTH BETWEEN LEADS
1.5 x Urated, DC for maximum 60 s
Urated, DC: 10 000 V → Urated, AC: 3500 V
U
U
rated, DC: 15 000 V → Urated, AC: 5300 V
rated, DC: 20 000 V → Urated, AC: 7000 V
Test voltage: customer re-test 1.35 x Urated, DC for maximum
60 s
Notes
INSULATION RESISTANCE
Min. 200 000 MΩ at 500 VDC / 60 s max.
•
•
Considered as destructive test in insulation liquid
Avoid flashover between wires and currents higher than 50 mA
TOLERANCE ON CAPACITANCE
20 ꢀ
CERAMIC DIELECTRIC
Y6P ( 10 ꢀ within -30 °C to +105 °C)
DISSIPATION FACTOR
Max. 1.5 ꢀ
OPERATING TEMPERATURE RANGE
-30 °C to +105 °C
Revision: 20-Apr-2021
Document Number: 23144
1
For technical questions, contact: slcap@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HVCC Series
Vishay Roederstein
www.vishay.com
DIMENSIONS in millimeters (inches)
Diameter
Thickness
Wire size
ORDERING INFORMATION, CERAMIC 10 kVDC
WIRE SIZE
ꢀ.ꢀ5 mm
( ꢀ.ꢀꢀ24)
LEAD SPACE
1 mm
LEAD LENGTH
5 mm
WIDTH
MAXIMUM MAXIMUM
DIAMETER THICKNESS
ꢀ.5 mm
( ꢀ.ꢀ24)
C
(pF)
TOL.
(%)
ORDERING CODE
(
ꢀ.ꢀ04)
(
ꢀ.24)
INCH
mm INCH mm INCH mm INCH mm
INCH
mm
mm
5.3
4.5
4.5
4.3
4.3
3.8
3.8
3.8
3.8
INCH
0.21
0.18
0.18
0.17
0.17
0.15
0.15
0.15
0.15
100
150
220
330
470
8
0.31
0.31
0.35
0.39
0.47
0.51
0.59
0.67
0.75
9
0.355
HVCC103Y6P101####
HVCC103Y6P151####
HVCC103Y6P221####
HVCC103Y6P331####
HVCC103Y6P471####
HVCC103Y6P681####
HVCC103Y6P102####
HVCC103Y6P152####
HVCC103Y6P202####
8
9
8
0.31
10
12
13
15
17
19
12.5
and
9.5
0.49
and
0.37
0.80
and
0.65
0.032
and
0.026
20
30
1.18
680
7.5
0.30
1000
1500
2000
ORDERING INFORMATION, CERAMIC 15 kVDC
WIRE SIZE
ꢀ.ꢀ5 mm
LEAD SPACE
1 mm
LEAD LENGTH
5 mm
WIDTH
MAXIMUM MAXIMUM
DIAMETER THICKNESS
ꢀ.5 mm
( ꢀ.ꢀ24)
C
TOL.
(%)
ORDERING CODE
(
ꢀ.ꢀ04)
(
ꢀ.24)
INCH
(pF)
(
ꢀ.ꢀꢀ24)
MM INCH mm INCH mm INCH mm
INCH
mm
mm
5.3
4.5
4.5
4.3
4.3
4.3
4.3
4.3
4.3
INCH
0.21
0.18
0.18
0.17
0.17
0.17
0.17
0.17
0.17
100
150
220
330
470
8
0.31
0.31
0.35
0.39
0.47
0.51
0.59
0.75
0.75
9
0.355
HVCC153Y6P101####
HVCC153Y6P151####
HVCC153Y6P221####
HVCC153Y6P331####
HVCC153Y6P471####
HVCC153Y6P681####
HVCC153Y6P102####
HVCC153Y6P152####
HVCC153Y6P202####
8
9
10
12
13
15
19
19
12.5
and
9.5
0.49
and
0.37
0.80
and
0.65
0.032
and
0.026
20
30
1.18
8
0.31
680
1000
1500
2000
ORDERING INFORMATION, CERAMIC 20 kVDC
LEAD SPACE
1 mm
WIRE SIZE
ꢀ.ꢀ5 mm
LEAD LENGTH
5 mm
WIDTH
ꢀ.5 mm
( ꢀ.ꢀ24)
MAXIMUM MAXIMUM
DIAMETER THICKNESS
C
(pF)
TOL.
(%)
ORDERING CODE
(
ꢀ.ꢀ04)
(
ꢀ.ꢀꢀ24)
(
ꢀ.24)
mm INCH mm INCH mm INCH mm
INCH
mm
INCH
mm
5.3
4.5
5.0
5.1
5.1
5.1
5.1
INCH
0.21
0.18
0.2
0.2
0.2
100
150
220
330
470
680
1000
8
8
9
12
13
15
17
0.31
0.31
0.35
0.47
0.51
0.59
0.67
9
0.355
HVCC203Y6P101####
HVCC203Y6P151####
HVCC203Y6P221####
HVCC203Y6P331####
HVCC203Y6P471####
HVCC203Y6P681####
HVCC203Y6P102####
12.5
and
9.5
0.49
and
0.37
0.8
and
0.65
0.032
and
0.026
20
30
1.18
8.5
0.33
0.2
0.2
Note
•
10 ꢀ tolerance is available upon request
Revision: 20-Apr-2021
Document Number: 23144
2
For technical questions, contact: slcap@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HVCC Series
Vishay Roederstein
www.vishay.com
MARKING
SAMPLE
SAMPLE
SAMPLE < 07ꢀ pF
SAMPLE < 33ꢀ pF
2ꢀ kV
≥ 07ꢀ pF
≥ 33ꢀ pF
1ꢀ kV
15 kV
1ꢀ kV / 15 kV
2ꢀ kV
HVCC
102M
15kV
1ꢀ1M
1ꢀ1M
1ꢀ1M
Y6P / YY WW
YYWW
YYWW
YYWW
YY - Year
WW - Week
YY - Year
WW - Week
YY - Year
WW - Week
YY - Year
WW - Week
ORDERING CODE
H
V
C
C
1
5
3
Y
6
P
1
ꢀ
2
M
E
A
X
1
2
3
4
5
5
6
7
1
2
3
4
6
7
SERIES
(HIGH VOLTAGE
CERAMIC CAPACITOR)
RATED VOLTAGE
TEMPERATURE
CHARACTERISTICS
CAPACITANCE CAPACITANCE
VALUE TOLERANCE
1
st DIGIT:
PACKAGING
LEAD TYPE /
LEAD SPACING /
GAUGE
2nd DIGIT:
LEAD LENGTH
LEAD TYPE (position 6)
STANDARD TYPE
LEAD SPACING
LEAD DIAMETER
LEAD LENGTH
(mm)
CODE
LEAD TYPE
# GAUGE
MATERIAL
(mm)
(mm)
0.65
0.80
CA
EA
Straight LL
Straight LL
9.5 1.0
12.5 1.0
22
20
TCCSW
TCCSW
30
30
5
5
Notes
•
1th digit: lead type / lead spacing / gauge
2nd digit: A = long leads
•
•
LL = long leads
TCCSW = tinned copper clad steel wire
PACKAGING (position 7)
CODE
VERSION
X
Bulk
Revision: 20-Apr-2021
Document Number: 23144
3
For technical questions, contact: slcap@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HVCC Series
Vishay Roederstein
www.vishay.com
PERFORMANCE
SPECIFICATION
METHOD AND NOTES
NO.
PARAMETER
TEST CONDITIONS
Tol. K = 10 ꢀ at 1000 h
Tol. M = 20 ꢀ at 1000 h
Components are measured with a LCR-meter. Consider aging
of ceramic. Given tolerance is valid 1000 h 24 h after last
heating. Before and after that moment, aging offset has to be
considered.
1
Capacitance
2
3
Dissipation factor
DF / tan δ = max. 1.5 ꢀ
(See general information for further instructions)
I
R = min. 200 GΩ in 60 s
NOTE: very high resistances are sensitive to the surrounding
area (may lead to unstable measurement values)
Insulation resistance
t = 5 s
U = 500 VDC 10 VDC
1. Apply +1.35 x URDC/URAC for max. 60 s
2. Unload part (Imax. = 50 mA)
3. Apply -1.35 x URDC for max. 60 s
4. Unload part (Imax. = 50 mA)
U1 = +1.35 x URDC/URAC max. 60 s
U2 = -1.35 x URDC/URAC max. 60 s
Dielectric strength
(between lead wires)
4
t
U1 = tU2 = 60 s
I
max. = 50 mA
5. Avoid current spikes higher than 50 mA
No visible damage.
The marking shall be legible
5
6
Appearance and marking
Dimensions
Visual inspection
Dimensions are within specification Measurement by caliper gauge
EIA code = Y6P
ΔC/C0 = 10 ꢀ
Temp. range = -30 °C to 105 °C
Temperature characteristics /
TCC
Measurement is done from cooler temperatures to hotter
7.1
7.2
temperatures in reasonable temperature steps. For
decreasing temperature run deaging effects must be
considered.
Temperature characteristics /
TCDF
DF / tan δ = max. 1.5 ꢀ
Temp. range = 20 °C to 105 °C
1. Connect both lead wires together
2. Dip component headfirst into a bath with oil and
metal balls (fig.)
3. Apply voltage between lead wires and metal balls
Dielectric strength of
body insulation
U = 5000 VDC
t = 60 s
8
Metal
About 3 mm to 4 mm
foil
Metal balls
Rise time:
ts = 1.2 μs 30 ꢀ
U
(V)
100 ꢀ
90 ꢀ
Half value time:
tr = 1.2 μs
tr = 50 μs 20 ꢀ
tf = 50 μs
U = 1.25 x URDC
n = 50 x single polarity
50 ꢀ
9
Pulse test
Over swing:
ü < 5 ꢀ
30 ꢀ
1.2 μs
50 μs
1. Initial measurement including no. 1, 2, 3, and 4
2. Condition the components to test temperature
3. Carry out life test / avoid 0 Ω short circuit
4. Final measurement including no. 1, 2, 3, and 4
Result: voltage breakdowns are not accepted
U = 1.25 x URDC
t = min. 1000 h
T = max. 105 °C
10
11
Life test
I
max. = 50 mA
1. Initial measurement including no. 1, 2, 3, and 4
2. Carry out steady state test
3. Final measurement including no. 1, 2, 3, and 4
Result: voltage breakdowns are not accepted
T = 40 °C
RH = 93 ꢀ
t = 240 h / 10 days
U = 1.5 x URDC
Steady state test
(without load)
Revision: 20-Apr-2021
Document Number: 23144
0
For technical questions, contact: slcap@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HVCC Series
Vishay Roederstein
www.vishay.com
PERFORMANCE
SPECIFICATION
METHOD AND NOTES
NO.
PARAMETER
TEST CONDITIONS
LOW = -40 °C
HIGH = +105 °C
1. Initial measurement including no. 1, 2, 3, and 4
2. Carry out temperature cycle
T
T
3. Final measurement including no. 1, 2, 3, and 4
Result: voltage breakdowns and cracks in coating are not
accepted
12
Temperature cycle
t
t
DWELL = 1800 s
CHANGE = about 300 s
n = 50 x
1. Initial measurement incl. no. 1, 2, 3, and 4
2. Carry out test
T
SOLDER = max. 250 °C
13
14
15
Solderability
t = max. 3 s
dist. solder-epoxy = min. 2 mm
(solder material: no known restrictions)
3. Final measurement incl. 1, 2, 3, and 4
Result: voltage breakdowns are not accepted
Fix the body of component, apply a tensile weight gradually to
each lead wire in the radial direction of capacitor up to 20 N,
and keep it for 10 s 1 s
F
PULL = max. 10 N
Strength of lead wire / pulling
Strength of lead wire / bending
t
PULL = max. 10 s
Bending each lead wire to 90° from the lead egress with 2.5 N
force, then back to original position and bent again from the
same direction. Totally 3 bends, 3 s each time.
1 bend: bending to 90° the return to normal position is one
bend. Start from 1.6 mm to 3.2 mm from the part body
F
BEND = max. 5 N
t
BEND = 2 s to 3 s
TYPICAL TCC Y6P
Axis Title
40
30
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0
20
10
0
-10
-20
-30
-40
-40
-30
-20
-10
0
10
20
30
40
50
60
70
80
90
100
110
Temperature (°C)
TYPICAL TCDF Y6P
Axis Title
2.0
10000
1000
100
1.5
1.0
0.5
0
10
-40
-30
-20
-10
0
10
20
30
40
50
60
70
80
90
100
110
Temperature (°C)
Revision: 20-Apr-2021
Document Number: 23144
5
For technical questions, contact: slcap@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HVCC Series
Vishay Roederstein
www.vishay.com
TYPICAL Y6P - ΔC/C0 / % VS. Urated, DC
Axis Title
20
10
10000
1000
100
0
-10
-20
-30
-40
-50
-60
-70
-80
10
0
10
20
30
40
50
60
70
80
90
100
110
120
Rated DC Voltage (%)
TYPICAL Y6P - ΔC/C0 / % VS. FREQUENCY
Axis Title
0
10000
1000
100
-2
-4
-6
-8
-10
10
1000
1
10
100
Frequency (kHz)
Axis Title
TYPICAL Y6P DF VS. FREQUENCY
50
10000
40
30
20
10
1000
100
10
0
1
10
100
1000
Frequency (kHz)
Revision: 20-Apr-2021
Document Number: 23144
6
For technical questions, contact: slcap@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HVCC Series
Vishay Roederstein
www.vishay.com
TYPICAL AC CURRENT VS. APPLIED VOLTAGE
Axis Title
7
6
5
4
3
2
1
0
10000
f = 50 Hz
amb = 25 °C
T
2000 pF
1000
1000 pF
100
470 pF
330 pF
150 pF
10
0
1
2
3
4
5
6
7
8
9
10
Applied Voltage (kVRMS
)
1. QUALIFICATION
1.1 BASICS
All components are tested according to the related testing plan, which you find in series datasheet. The test procedures are
more severe than noted in the datasheet due to aging and storage effects of the components. We do not guarantee if any limit
is exceeded. Internal test procedures are more severe than noted in the table “Performance” because of aging and storage
effects of the components.
1.2 LIMITS OF APPLICATION
Please take care whilst designing our parts into one of these applications, which require highest reliability and possible errors
might harm life, body or property of a third party.
- Transportation (aerospace, aircraft, train, ship, submarine, etc.)
- Medical equipment
- Critical control equipment (power plant, traffic signals, disaster prevention)
- Other application requiring similar reliability characteristics
2. STORAGE
2.1 ORIGINAL PACKAGING
Storing in the sealed original packages is preferred.
2.2 STORING CONDITIONS
Epoxy coating does not protect perfectly from all environmental conditions. Some materials can penetrate the epoxy and harm
the performance of the parts. Therefore it is not recommended to use or store the parts in corrosive or humid atmosphere.
Optimal storing conditions should not exceed +10 °C to +35 °C and relative humidity up to 60 ꢀ.
3. ASSEMBLY
3.1 WIRE FORMING
If wire forming is needed, excessive mechanical force to the component body must be avoided as it might cause cracks in the
ceramic element.
Do not crack coating extension of the epoxy layer, when applying force onto the wire.
Revision: 20-Apr-2021
Document Number: 23144
7
For technical questions, contact: slcap@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HVCC Series
Vishay Roederstein
www.vishay.com
3.2 SOLDERING
Do not exceed resistance to soldering heat specification of the component. Subjecting this product to excessive heating could
melt the internal junction solder and may result in thermal shocks that can crack the ceramic element.
Manual Soldering / Rework
Set the soldering iron (50 W max.) to less than 400 °C and solder the wires within 4 seconds onto the PCB. Exceeding that
recommendations might reduce the electrical performance of the component.
Wave Soldering
Most common way to assemble these kind of components is carried out in 4 steps:
1. Increasing temperature to 120 °C within about 20 s
2. Preheating at 120 °C for about 60 s
3. Soldering at 260 °C in less than 10 s
4. Gradual air cooling in constant air flow
Reflow Soldering
It is not recommended to use reflow soldering with these components.
3.3 MOLDING AND COATING
Molding and / or applying another coating material might harm the performance of the components. Therefore it is
recommended to test the electrical characteristics of the molded / coated part in advance.
Typical error is a reduced withstand voltage because of an inadequate solvent in the molding material, which penetrates the
epoxy coating (please see recommendations for cleaning and drying in section 4.1 to 4.3). A similar result can be caused by an
inadequate coating material, which might pull the original epoxy off the ceramic element.
4. CLEANING AND DRYING
0.1 CLEANING AGENTS
Cleaning agents might have an influence to the performance of the components after washing and after unsuitable drying. The
following agents have been tested and classified:
Recommended
• DI water
Not Recommended
• Acetone
• Isopropanol
• Ethanol
• ...
• Ehtyl alcohol
• ...
0.2 ULTRASONIC
Settings for ultrasonic cleaning
Rinse bath capacity: output of 20 Watts per liter or less
Rinsing time: 5 min max.
Do not vibrate the PCB / PWB directly.
Excessive ultrasonic cleaning may lead to permanent destruction of the component.
0.3 DRYING
In case of cleaning the assembled PCB with cleaning agents a proper drying is recommended. It is recommended to properly
insulate the assembled PCB (see section 5.2) after drying.
5. TESTING AND OPERATION
5.1 SHORT CIRCUIT
Avoid repetitive zero-ohm-short circuits because they might harm the components core construction, such as arcs between
lead wires because of inadequate insulation material (e.g air).
5.2 INSULATION
During operation, components should be surrounded by adequate insulating material (silicone oil, epoxy or molding material).
Voltage breakdowns or leakage current through this material (between lead wires or to ground) is not acceptable. It is
recommended to properly clean and dry the assembled PCB (see section 4.1 to 4.3) before enclosing in insulating material.
5.3 APPLIED VOLTAGE
When using DC-rated components in AC applications (also ripple) the peak to peak voltage should not exceed the nominal
DC-rating of the component.
Revision: 20-Apr-2021
Document Number: 23144
8
For technical questions, contact: slcap@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HVCC Series
Vishay Roederstein
www.vishay.com
6. CAUTION
6.1 OPERATING VOLTAGE AND FREQUENCY CHARACTERISTIC
When sinusoidal or ripple voltage applied to DC ceramic disc capacitors, be sure to maintain the peak-to-peak value or the peak
value of the sum of both AC + DC within the rated voltage.
When start or stop applying the voltage, resonance may generate irregular voltage.
When rectangular or pulse wave voltage is applied to DC ceramic disc capacitors, the self-heating generated by the capacitor
is higher than the sinusoidal application with the same frequency. The allowable voltage rating for the rectangular or pulse wave
corresponds approximately with the allowable voltage of a sinusoidal wave with the double fundamental frequency.
The allowable voltage varies, depending on the voltage and the waveform.
Diagrams of the limiting values are available for each capacitor series on request.
VOLTAGE
DC
DC + AC
AC
Waveform figure
Vp-p
V0-p
V0-p
0
0
0
6.2 OPERATING TEMPERATURE AND SELF-GENERATED HEAT
The surface temperature of the capacitors must not exceed the upper limit of its rated operating temperature.
During operation in a high-frequency circuit or a pulse signal circuit, the capacitor itself generate heat due to dielectric losses.
Applied voltage should be the load such as self-generated heat is within 20 °C on the condition of environmental temperature
25 °C.
Note, that excessive heat may lead to deterioration of the capacitor’s characteristics.
RELATED DOCUMENTS
General Information
Product Sheet
Infographic
www.vishay.com/doc?22001
www.vishay.com/doc?48508
www.vishay.com/doc?48450
Revision: 20-Apr-2021
Document Number: 23144
9
For technical questions, contact: slcap@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2021
Document Number: 91000
1
HVCC203Y6P331 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
HVCC203Y6P471 | VISHAY | High Voltage Ceramic Capacitors Radial-Leaded Singlelayer Disc | 获取价格 | |
HVCC203Y6P681 | VISHAY | High Voltage Ceramic Capacitors Radial-Leaded Singlelayer Disc | 获取价格 | |
HVCKAT10J475B | CDE | 获取价格 | ||
HVCKAT8J391B | CDE | 获取价格 | ||
HVCR0402J100MK9B | RESI | HVCR系列是高压贴片电阻,无磁设计,温飘最低±100ppm/℃,最高精度±1%,阻值最高1T;本系列产品提供两种不同的额定电压值,经过调阻的产品和未经调阻的产品。经过调阻的产品阻值精度可以做到1 | 获取价格 | |
HVCR0402J100MK9R | RESI | HVCR系列是高压贴片电阻,无磁设计,温飘最低±100ppm/℃,最高精度±1%,阻值最高1T;本系列产品提供两种不同的额定电压值,经过调阻的产品和未经调阻的产品。经过调阻的产品阻值精度可以做到1 | 获取价格 | |
HVCR0402J10M0K9B | RESI | HVCR系列是高压贴片电阻,无磁设计,温飘最低±100ppm/℃,最高精度±1%,阻值最高1T;本系列产品提供两种不同的额定电压值,经过调阻的产品和未经调阻的产品。经过调阻的产品阻值精度可以做到1 | 获取价格 | |
HVCR0402J10M0K9R | RESI | HVCR系列是高压贴片电阻,无磁设计,温飘最低±100ppm/℃,最高精度±1%,阻值最高1T;本系列产品提供两种不同的额定电压值,经过调阻的产品和未经调阻的产品。经过调阻的产品阻值精度可以做到1 | 获取价格 | |
HVCR0402J1G00U9B | RESI | HVCR系列是高压贴片电阻,无磁设计,温飘最低±100ppm/℃,最高精度±1%,阻值最高1T;本系列产品提供两种不同的额定电压值,经过调阻的产品和未经调阻的产品。经过调阻的产品阻值精度可以做到1 | 获取价格 | |
HVCR0402J1G00U9R | RESI | HVCR系列是高压贴片电阻,无磁设计,温飘最低±100ppm/℃,最高精度±1%,阻值最高1T;本系列产品提供两种不同的额定电压值,经过调阻的产品和未经调阻的产品。经过调阻的产品阻值精度可以做到1 | 获取价格 |
HVCC203Y6P331 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6