首页 |元器件品牌

ICTE-10C [VISHAY]

TRANSZORB⑩ TRANSIENT VOLTAGE SUPPRESSOR; 的TransZorb ™瞬态电压抑制器
ICTE-10C
型号： ICTE-10C
厂家： VISHAY    VISHAY
描述：

TRANSZORB⑩ TRANSIENT VOLTAGE SUPPRESSOR
的TransZorb ™瞬态电压抑制器

二极管
文件： 总4页 (文件大小：46K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
ICTE5.0 THRU ICTE15C SERIES  
TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR  
Stand-off Voltage - 5.0 to 15 Volts  
Peak Pulse Power - 1500 Watts  
FEATURES  
♦ Plastic package has Underwriters Laboratory  
Flammability Classification 94V-0  
Case Style 1.5KE  
♦ Glass passivated junction  
♦ 1500W Peak pulse power capability with a  
10/1000µs waveform, repetition rate (duty cycle): 0.05%  
♦ Excellent clamping capability  
1.00 (25.4)  
MIN.  
♦ Low incremental surge resistance  
♦ Fast response time: typically less than  
0.205 (5.207)  
1.0ps from 0 Volts to V  
and 5.0ns for bi-directional  
for uni-directional  
(BR)  
0.190 (4.826)  
DIA.  
♦ Ideal for data and bus line applications  
♦ High temperature soldering guaranteed:  
265°C/10 seconds, 0.375" (9.5mm) lead length,  
5lbs. (2.3 kg) tension  
0.375 (9.527)  
0.360 (9.146)  
♦ Includes 1N6373 thru 1N6385  
1.00 (25.4)  
MIN.  
MECHANICAL DATA  
Case: Molded plastic over a passivated junction  
Terminals: Plated Axial leads, solderable per MIL-STD-750,  
Method 2026  
0.042 (1.07)  
0.038 (0.958)  
DIA.  
Polarity: For uni-directional types the color band denotes the  
cathode, which is posititive with respect to the anode under  
normal TVS operation  
Dimensions in inches and (millimeters)  
Mounting Position: Any  
Weight: 0.045 ounce, 1.2 grams  
MAXIMUM RATINGS AND CHARACTERISTICS  
Ratings at 25°C ambient temperature unless otherwise specified.  
SYMBOL  
VALUE  
UNITS  
Peak pulse power dissipation with a  
10/1000µs waveform (NOTE 1, FIG. 1)  
PPPM  
Minimum 1500  
Watts  
Steady state power dissipation, TL= 75°C  
at lead lengths 0.375" (9.5mm)  
PM(AV)  
IPPM  
6.5  
Watts  
Amps  
Peak pulse current with a 10/1000µs  
waveform (NOTE 1, FIG. 3)  
SEE TABLE 1 & 2  
Peak forward surge current, 8.3ms single half  
sine-wave superimposed on rated load for uni-directional  
only (JEDEC Method) (NOTE 2)  
IFSM  
200  
Amps  
Maximum instantaneous forward voltage  
at 100A for uni-directional only  
VF  
3.5  
Volts  
°C  
Operating junction and  
storage temperature range  
TJ, TSTG  
-55 to +175  
NOTES:  
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA= 25°C per Fig. 2  
(2) 8.3ms single half sine-wave, duty cycle=4 pulses per minute maximum  
1/21/99  
ELECTRICAL CHARACTERISTICS at 25°C (JEDEC REGISTERED DATA) TABLE 1  
MINIMUM(3)  
BREAKDOWN  
VOLTAGE  
at 1.0mA.  
V(BR)  
MAXIMUM  
REVERSE  
LEAKAGE  
at VWM  
ID  
MAXIMUM  
CLAMPING  
VOLTAGE  
at lPP = 1.0A  
Vc  
MAXIMUM  
CLAMPING  
VOLTAGE  
at lPP = 10A  
Vc  
MAXIMUM  
PEAK  
PULSE  
CURRENT  
IPP  
STAND-OFF  
VOLTAGE  
GENERAL  
SEMICONDUCTOR  
PART  
JEDEC  
TYPE  
VWM  
NUMBER  
NUMBER  
(VOLTS)  
(VOLTS)  
(µA)  
(VOLTS)  
(VOLTS)  
(Amps)  
1N6373(2)  
1N6374  
1N6375  
1N6376  
1N6377  
ICTE-5(2)  
ICTE-8  
5.0  
8.0  
6.0  
9.4  
300  
25.0  
2.0  
7.1  
7.5  
160  
100  
90  
11.3  
13.7  
16.1  
20.1  
11.5  
14.1  
16.5  
20.6  
ICTE-10  
ICTE-12  
ICTE-15  
10.0  
12.0  
15.0  
11.7  
14.1  
17.6  
2.0  
70  
2.0  
60  
ELECTRICAL CHARACTERISTICS AT 25°C (JEDEC REGISTERED DATA) TABLE 2  
MINIMUM(3)  
BREAKDOWN  
VOLTAGE  
at 1.0mA.  
V(BR)  
MAXIMUM  
REVERSE  
LEAKAGE  
at VWM  
ID  
MAXIMUM  
CLAMPING  
VOLTAGE  
at lPP = 1A  
Vc  
MAXIMUM  
CLAMPING  
VOLTAGE  
at lPP = 10A  
Vc  
MAXIMUM  
PEAK  
PULSE  
CURRENT  
IPP  
STAND-OFF  
VOLTAGE  
GENERAL  
SEMICONDUCTOR  
PART  
JEDEC  
TYPE  
VWM  
NUMBER  
NUMBER  
(VOLTS)  
(VOLTS)  
(µA)  
(VOLTS)  
(VOLTS)  
(Amps)  
1N6382  
1N6383  
1N6384  
1N6385  
ICTE-8C  
ICTE-10C  
ICTE-12C  
ICTE-15C  
8.0  
9.4  
50.0  
2.0  
2.0  
2.0  
11.4  
14.1  
16.7  
20.8  
11.6  
14.5  
17.1  
21.4  
100  
90  
10.0  
12.0  
15.0  
11.7  
14.1  
17.6  
70  
60  
NOTES:  
(1) “ C “ Suffix indicates bi-directional  
(2) ICTE-5 and 1N6373 are not available as bi-directional  
(3) The minimum breakdown voltage as shown takes into consideration the ±1 Volt tolerance normally specified for power supply regulation on most integrated circuit  
manufacturers data sheets. Please consult factory for devices that require reduced clamping voltages where tighter regulated power supply voltages are employed.  
(4) Clamping Factor: 1.33 at full lo rated power; 1.20 at 50% rated power; Clamping Factor: the ratio of the actual Vc (Clamping Voltage) to the V(BR) (Breakdown Voltage)  
as measured on a specific device.  
RATINGS AND CHARACTERISTIC CURVES ICTE5.0 THRU ICTE15C SERIES  
FIG. 1 - PEAK PULSE POWER RATING CURVE  
FIG. 2 - PULSE DERATING CURVE  
100  
NON-REPETITIVE  
PULSE WAVEFORM  
SHOWN in FIG. 3  
100  
75  
50  
25  
0
T =25°C  
A
10  
1.0  
0.1  
25  
75  
125  
175  
200  
0
50  
100  
150  
µ
µ
µ
µ
100 s  
1.0ms  
10ms  
0.1 s  
1.0 s  
10 s  
TA, AMBIENT TEMPERATURE, °C  
td, PULSE WIDTH, sec.  
FIG. 4 - TYPICAL JUNCTION CAPACITANCE  
UNI-DIRECTIONAL TYPE  
100,000  
10,000  
FIG. 3 - PULSE WAVEFORM  
MEASURED at  
ZERO BIAS  
PULSE WIDTH (td) IS DEFINED  
as that POINT WHERE the PEAK  
CURRENT DECAYS to 50% of I  
tr=10µsec.  
PP  
T =25°C  
A
f=1.0 MHz  
Vsig=50mVp-p  
PEAK VALUE  
I
PP  
100  
50  
MEASURED at  
STAND-OFF  
VOLTAGE, V  
HALF VALUE - I  
WM  
PP  
2
1,000  
100  
10 x 1000µs WAVEFORM as DEFINED by R.E.A.  
td  
1
0
0
1
2
5
10 20  
50 100 200  
1.0  
2.0  
3.0  
4.0  
V(BR), BREAKDOWN VOLTAGE, VOLTS  
t, TIME, ms  
2
5
RATINGS AND CHARACTERISTIC CURVES ICTE5.0 THRU ICTE15C SERIES  
FIG. 5 - TYPICAL JUNCTION CAPACITANCE  
BIDIRECTIONAL TYPE  
100,000  
FIG. 6 - MAXIMUM NON-REPETITIVE PEAK FORWARD  
MEASURED AT  
ZERO BIAS  
SURGE CURRENT  
200  
FOR UNI-DIRECTIONAL ONLY  
8.3ms SINGLE HALF SINE-WAVE  
(JEDEC Method)  
T =25°C  
J
10,000  
f=1.0 MHz  
Vsig=50mVp-p  
100  
1,000  
100  
MEASURED AT  
STAND-OFF  
VOLTAGE  
(V  
WM  
)
10  
1
10  
NUMBER OF CYCLES AT 60 Hz  
100  
10  
100 200  
1
V(BR), BREAKDOWN VOLTAGE, VOLTS  
FIG. 7 - TYPICAL CHARACTERISTIC CLAMPING VOLTAGE  
50  
T =25°C UNIDIRECTIONAL ONLY  
A
10  
1
6
8
10  
12 14  
16  
18  
20 22  
24  
Vc, CLAMPING VOLTAGE, VOLTS  

相关型号：

ICTE-10C-E3/100

 DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY

ICTE-10C-E3/4E

 DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY

ICTE-10C-E3/4F

 DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY

ICTE-10C-E3/60

 DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY

ICTE-10C-E3/64

 DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY

ICTE-10C-E3/66

 DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY

ICTE-10C-E3/73

 DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY

ICTE-10C-E3/91

 DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY

ICTE-10C-E3/92

 DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY

ICTE-10C-E3/93

 DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY

ICTE-10C-HE3/54

 DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, ROHS COMPLIANT, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY

ICTE-10C/1-E3

 DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, 1.5KE, 2 PIN, Transient Suppressor
VISHAY
©2020 ICPDF网 联系我们和版权申明