IHLM2525CZERR10M06 [VISHAY]
10 % DCR Tolerance, Low Profile, Power Inductors; 10％的DCR容差，低调，功率电感
| 型号： | IHLM2525CZERR10M06 |
| 厂家： | 
VISHAY |
| 描述： | 10 % DCR Tolerance, Low Profile, Power Inductors |
| 文件： | 总4页 (文件大小：117K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
IHLM-2525CZ-06
Vishay Dale
10 % DCR Tolerance,
Low Profile, Power Inductors
FEATURES
• Lowest molded height (3.0 mm) in this package
footprint
• Shielded construction
• Frequency range up to 5.0 MHz
• Lowest DCR/µH, in this package size
• Handles high transient current spikes without saturation
• Ultra low buzz noise, due to composite construction
• Encapsulated body offers improved environmental
protection and moisture resistance
• Higher dielectric withstanding voltage vs. IHLP
• Flame retardant encapsulant (UL 94 V-0)
• Corrosion resistant package
Manufactured under one or more of the following:
US Patents; 6,198,375/6,204,744/6,449,829/6,460,244.
Several foreign patents, and other patents pending.
STANDARD ELECTRICAL SPECIFICATIONS
• Compliant to RoHS directive 2002/95/EC
L0
HEAT
RATING
CURRENT
DC TYP.
(A) (3)
INDUCTANCE
20 % AT 100 kHz,
0.25 V, 0 A
(µH)
DCR
10 %
AT 25 °C
(mΩ)
SATURATION
CURRENT
DC TYP.
APPLICATIONS
(A) (4)
• Tolerance DCR for current sense applications
• Improved current balance in phased power supplies
• Improved thermal management
• PDA/notebook/desktop/server and battery powered devices
• High current, low profile POL converters
• DC/DC converters in distributed power systems
0.10
0.20
0.33
0.47
0.68
0.82
1.0
1.37
2.34
32.5
24
20
17.5
15.5
13
11
9
60
41
3.20
30
3.86
26
5.20
25
• DC/DC converter for Field Programmable Gate Array
(FPGA)
7.41
24
8.44
22
1.5
14.50
17.73
28.21
37.11
61.47
97.71
18
DIMENSIONS in inches [millimeters]
2.2
8
14
3.3
6
13.5
10
Typical Pad Layout (Min.)
4.7
5.5
4
0.255 0.010
[6.47 0.254]
0.135
[3.43]
0.125
[3.18]
8.2
7.5
7.0
10
3
0.146
[3.71]
Notes
0.290
[7.37]
(1)
(2)
(3)
(4)
(5)
All test data is referenced to 25 °C ambient
Operating temperature range - 55 °C to + 125 °C
0.270 0.015
[6.86 0.381]
DC current (A) that will cause an approximate ΔT of 40 °C
DC current (A) that will cause L0 to drop approximately 20 %
The part temperature (ambient + temp rise) should not exceed
125 °C under worst case operating conditions. Circuit design,
component placement, PWB trace size and thickness, airflow
and other cooling provisions all affect the part temperature. Part
temperature should be verified in the end application.
0.118 [3.0] Max.
0.050 0.012
[1.27 0.30]
DESCRIPTION
IHLM-2525CZ-06
1.0 µH
20 %
ER
e3
MODEL
INDUCTANCE VALUE INDUCTANCE TOLERANCE
PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
I
H
L
M
2
5
2
5
C
Z
E
R
1
R
0
M
0
6
PRODUCT FAMILY
SIZE
PACKAGE
CODE
INDUCTANCE
VALUE
TOL
SERIES
Document Number: 34185
Revision: 12-May-09
For technical questions, contact: magnetics@vishay.com
www.vishay.com
1
IHLM-2525CZ-06
10 % DCR Tolerance,
Low Profile, Power Inductors
Vishay Dale
PERFORMANCE GRAPHS
IHLM-2525CZ-06 0.10 µH
IHLM-2525CZ-06 0.20 µH
ΔT °C
0.120
0.100
0.080
100
80
100
80
0.25
0.20
0.15
0.10
ΔT °C
L
L
60
60
0.060
0.040
0.020
0.000
40
40
20
0
20
0
0.05
0.00
5
0
10
20
30
40
50
60
0
10
15
DC CURRENT (A)
40
20
25
30
35
DC CURRENT (A)
IHLM-2525CZ-06 0.47 µH
IHLM-2525CZ-06 0.33 µH
0.6
0.5
0.4
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
100
100
80
ΔT °C
ΔT °C
80
L
60
60
L
0.3
0.2
40
20
40
20
0
0.1
0.0
0
5
10
15
20
25
0
0
5
10
15
20
25
30
DC CURRENT (A)
DC CURRENT (A)
IHLM-2525CZ-06 0.68 µH
IHLM-2525CZ-06 0.82 µH
ΔT °C
0.8
0.9
0.8
0.7
0.6
0.5
0.4
100
100
80
ΔT °C
0.7
L
80
0.6
L
0.5
0.4
0.3
0.2
0.1
0.0
60
60
40
20
40
20
0
0.3
0.2
0.1
0.0
0
5
10
15
20
25
0
5
10
15
20
25
0
DC CURRENT (A)
DC CURRENT (A)
IHLM-2525CZ-06 1.5 µH
IHLM-2525CZ-06 1.00 µH
1.6
1.4
100
80
1.2
1.0
0.8
100
ΔT °C
ΔT °C
L
80
L
1.2
1.0
0.8
0.6
0.4
0.2
0.0
60
60
0.6
0.4
40
20
0
40
20
0.2
0.0
0
0
2
4
6
8
10
12
14
16
18
5
10
15
20
0
DC CURRENT (A)
DC CURRENT (A)
www.vishay.com
2
For technical questions, contact: magnetics@vishay.com
Document Number: 34185
Revision: 12-May-09
IHLM-2525CZ-06
10 % DCR Tolerance,
Low Profile, Power Inductors
Vishay Dale
PERFORMANCE GRAPHS
IHLM-2525CZ-06 2.2 µH
IHLM-2525CZ-06 3.3 µH
2.5
100
80
3.5
3.0
2.5
2.0
1.5
1.0
100
ΔT °C
ΔT °C
2.0
1.5
1.0
0.5
0.0
80
L
L
60
60
40
40
20
20
0
0.5
0.0
0
2
4
6
8
10
12
14
0
0
2
4
6
8
10
12
DC CURRENT (A)
DC CURRENT (A)
IHLM-2525CZ-06 4.7 µH
ΔT °C
IHLM-2525CZ-06 8.2 µH
ΔT °C
5.0
4.5
9.0
100
100
8.0
L
4.0
80
80
7.0
6.0
5.0
4.0
L
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
60
60
40
20
40
20
3.0
2.0
1.0
0
10
0.0
0
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
DC CURRENT (A)
DC CURRENT (A)
IHLM-2525CZ-06 10.0 µH
100
10.0
ΔT °C
8.0
6.0
4.0
2.0
0.0
80
L
60
40
20
0
0
1
2
3
4
5
6
7
DC CURRENT (A)
Document Number: 34185
Revision: 12-May-09
For technical questions, contact: magnetics@vishay.com
www.vishay.com
3
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号：
IHLM2525CZERR10M07
General Fixed Inductor, 1 ELEMENT, 0.1 uH, GENERAL PURPOSE INDUCTOR, SMD, CHIP, 2525, ROHS COMPLIANT
VISHAY
IHLM2525CZERR33M01
General Fixed Inductor, 1 ELEMENT, 0.33 uH, COMPOSITE-CORE, GENERAL PURPOSE INDUCTOR, SMD, CHIP, 2525, ROHS COMPLIANT
VISHAY
IHLM2525CZERR47M01
General Fixed Inductor, 1 ELEMENT, 0.47 uH, COMPOSITE-CORE, GENERAL PURPOSE INDUCTOR, SMD, CHIP, 2525, ROHS COMPLIANT
VISHAY
IHLM2525CZERR68M06
General Fixed Inductor, 1 ELEMENT, 0.68 uH, GENERAL PURPOSE INDUCTOR, SMD, CHIP, 2525, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明