IHLP2525CZER8R2M1A [VISHAY]
General Fixed Inductor, 1 ELEMENT, 8.2 uH, COMPOSITE-CORE, GENERAL PURPOSE INDUCTOR, SMD, CHIP, 2525, HALOGEN FREE AND ROHS COMPLIANT;
| 型号： | IHLP2525CZER8R2M1A |
| 厂家： | 
VISHAY |
| 描述： | General Fixed Inductor, 1 ELEMENT, 8.2 uH, COMPOSITE-CORE, GENERAL PURPOSE INDUCTOR, SMD, CHIP, 2525, HALOGEN FREE AND ROHS COMPLIANT 大电流电感器 测试 |
| 文件： | 总3页 (文件大小：115K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
IHLP-2525CZ-1A
www.vishay.com
Vishay Dale
Low Profile, High Current IHLP® Inductors
FEATURES
• Shielded construction
• Frequency range up to 1.0 MHz
• Lowest DCR/μH, in this package size
• Powered iron composition provides soft
saturation
• Handles high transient current spikes without
hard saturation
• Ultra low buzz noise, due to composite
construction
• AEC-Q200 qualified
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21 definition
Manufactured under one or more of the following:
US Patents; 6,198,375/6,204,744/6,449,829/6,460,244.
Several foreign patents, and other patents pending.
STANDARD ELECTRICAL SPECIFICATIONS
APPLICATIONS
L0
HEAT
• Engine and transmission control units
• Diesel injection drivers
• DC/DC converters for entertainment/navigation systems
• Noise suppression for motors
- Windshield wipers
- Power seats
- Power mirrors
- Heating and ventilation blowers
- HID lighting
• LED drivers
INDUCTANCE
20 ꢀ AT 100 kHz, TYP. MAX. CURRENT
0.25 V, 0 A
(μH)
DCR DCR
RATING SATURATION
CURRENT
DC TYP.
(A) (4)
25 °C 25 °C DC TYP.
(m) (m)
(A) (3)
12.5
9.0
1.0
2.2
3.3
4.7
6.8
8.2
10
7.6
8.0
9.5
7.0
6.5
4.0
4.0
4.0
3.5
2.5
15.7
24.8
31.8
44.6
52.3
67.8
16.5
26.0
33.4
46.8
54.9
71.2
7.0
6.0
5.5
5.0
DIMENSIONS in inches [millimeters]
4.0
Typical Pad Layout (Min.)
22
128.9 135.0
2.9
0.255 0.010
[6.47 0.254]
0.125 0.010
[3.18 0.254]
0.135
[3.429]
Notes
(1)
(2)
(3)
(4)
(5)
0.135
All test data is referenced to 25 °C ambient
Operating temperature range - 55 °C to + 125 °C
[3.429]
0.325
[8.255]
DC current (A) that will cause an approximate T of 40 °C
DC current (A) that will cause L0 to drop approximately 20 %
The part temperature (ambient + temp. rise) should not exceed
125 °C under worst case operating conditions. Circuit design,
component placement, PWB trace size and thickness, airflow
and other cooling provisions all affect the part temperature. Part
temperature should be verified in the end application.
0.270 0.015
[6.86 0.381]
0.180 0.01
[4.572 0.254]
0.118 [3.0]
Max.
0.025 0.015
[0.635 0.381]
0.085 0.01
[2.159 0254]
0.125 0.01
[3.18 0.254]
0.050 0.012
[1.27 0.300]
DESCRIPTION
IHLP-2525CZ-1A
1.0 μH
20 ꢀ
ER
e3
MODEL
INDUCTANCE VALUE
INDUCTANCE TOLERANCE
PACKAGE CODE
JEDEC LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
I
H
L
P
2
5
2
5
C
Z
E
R
1
R
0
M
1
A
PRODUCT FAMILY
SIZE
PACKAGE
CODE
INDUCTANCE
VALUE
TOL.
SERIES
Revision: 06-Jun-11
Document Number: 34242
1
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHLP-2525CZ-1A
www.vishay.com
Vishay Dale
PERFORMANCE GRAPHS
IHLP-2525CZ-1A 1.0 µH
IHLP-2525CZ-1A 2.2 µH
100
80
1.25
1.00
0.75
100
80
60
40
20
0
2.5
2.0
1.5
1.0
0.5
0.0
ΔT °C
ΔT °C
60
L
L
40
0.50
0.25
0.00
20
0
0
2
4
6
8
10
12
14
16
18
20
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14
DC CURRENT (A)
DC CURRENT (A)
IHLP-2525CZ-1A 3.3 µH
ΔT °C
IHLP-2525CZ-1A 4.7 µH
100
100
5.0
4.0
3.0
2.0
1.0
0.0
5.0
ΔT °C
80
60
40
20
0
80
60
40
20
0
4.0
3.0
2.0
1.0
0.0
L
L
0
1
2
3
4
5
6
7
8
9
10 11
0
1
2
3
4
5
6
7
8
9
DC CURRENT (A)
DC CURRENT (A)
IHLP-2525CZ-1A 6.8 µH
IHLP-2525CZ-1A 8.2 µH
100
80
60
40
20
0
7.5
6.0
4.5
3.0
1.5
0.0
10
8
100
80
ΔT °C
ΔT °C
6
60
L
L
4
2
0
40
20
0
0
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
8
9
DC CURRENT (A)
DC CURRENT (A)
IHLP-2525CZ-1A 10 µH
ΔT °C
IHLP-2525CZ-1A 22 µH
ΔT °C
100
25
100
80
60
40
20
0
12.5
10.0
7.5
20
15
10
5
80
60
40
20
0
L
L
5.0
2.5
0
0.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0
1
2
3
4
5
6
7
DC CURRENT (A)
DC CURRENT (A)
Revision: 06-Jun-11
Document Number: 34242
2
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号：
IHLP2525CZERR10M01
General Fixed Inductor, 1 ELEMENT, 0.1 uH, COMPOSITE-CORE, GENERAL PURPOSE INDUCTOR, SMD, CHIP, 2525, GREEN
VISHAY
IHLP2525CZERR47M07
General Fixed Inductor, 1 ELEMENT, 0.47 uH, COMPOSITE-CORE, GENERAL PURPOSE INDUCTOR, SMD, CHIP, 2525, ROHS COMPLIANT
VISHAY
IHLP2525CZERR68M01
General Fixed Inductor, 1 ELEMENT, 0.68 uH, COMPOSITE-CORE, GENERAL PURPOSE INDUCTOR, SMD, CHIP, 2525, GREEN
VISHAY
©2020 ICPDF网 联系我们和版权申明