IMS02ER3R9J [VISHAY]
General Fixed Inductor, 1 ELEMENT, 3.9 uH, IRON-CORE, GENERAL PURPOSE INDUCTOR, AXIAL LEADED, ROHS COMPLIANT;型号: | IMS02ER3R9J |
厂家: | VISHAY |
描述: | General Fixed Inductor, 1 ELEMENT, 3.9 uH, IRON-CORE, GENERAL PURPOSE INDUCTOR, AXIAL LEADED, ROHS COMPLIANT |
文件: | 总3页 (文件大小:61K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
IMS-2
Vishay Dale
Inductors, Commercial, Molded, Shielded, Miniature, Axial Leaded
FEATURES
• Flame retardant coating
• Electromagnetic shield
ELECTRICAL SPECIFICATIONS
• Small package for a shielded inductor
Inductance Tolerance: 10 % standard, 5 % available
• Epoxy molded construction provides superior
Insulation Resistance: 1000 M minimum per
moisture protection
MIL-STD-202, method 302, test condition B
• Precision performance, excellent reliability, sturdy
construction
Dielectric Withstanding Voltage: 200 VAC per
MIL-STD-202, method 301 (at sea level)
• Compliant to RoHS Directive 2002/95/EC
Percent Coupling: 3 % maximum per MIL-PRF-15305
Operating Temperature: - 55 °C to + 105 °C
MECHANICAL SPECIFICATIONS
Terminal Strength: 3 lb pull per MIL-STD-202, method 211,
test condition A, except 180° rotation for a total of 540°
ENVIRONMENTAL PERFORMANCE
Weight: IMS-2 = 0.30 g maximum
TEST
CONDITIONS
SPECIFICATIONS
Barometric
Pressure
TEST EQUIPMENT (1)
C
MIL-STD-202, method 105
• H/P 4342A Q-meter
Thermal Shock
Flammability
Overload
A-1
MIL-STD-202, method 107
MIL-STD-202, method 111
MIL-PRF-15305
• Measurements corporation megacycle meter, model 59
-
-
• Wheatstone bridge
Low Temperature
Storage
Note
-
A
-
MIL-PRF-15305
(1)
Test procedure per MIL-PRF-15305
Resistance to
Soldering Heat
MIL-STD-202, method 210
MIL-STD-202, method 215
MATERIAL SPECIFICATIONS
Encapsulant: Epoxy
Resistance to
Solvents
Standard Terminals: #24 AWG, tinned copper
DIMENSIONS in inches [millimeters]
1.50 0.120
[38.10 3.054
0.250 0.010
[6.35 0.25ꢀ4
0.095 0.010
[2.ꢀ1 0.25ꢀ4
0.020 0.0015
[0.508 0.0384
STANDARD ELECTRICAL SPECIFICATIONS
IND.
(μH)
TOL.
(%)
Q
MIN.
TEST FREQUENCY L AND Q
(MHz)
SRF MIN.
(MHz) (1)
DCR MAX.
RATED DC CURRENT
(mA) (2)
MODEL
()
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
10
10
10
10
10
10
10
10
10
10
10
10
10
54
52
50
49
47
46
44
42
41
41
39
38
37
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
490.0
430.0
415.0
375.0
330.0
300.0
260.0
230.0
220.0
210.0
180.0
165.0
150.0
0.10
0.11
0.12
0.13
0.15
0.16
0.18
0.19
0.21
0.23
0.24
0.27
0.30
670
635
610
585
545
530
495
485
460
440
430
405
385
Notes
(1)
(2)
Measured with full length lead
Rated DC current based on maximum temperature rise as shown in table
Document Number: 34045
Revision: 24-May-11
For technical questions, contact: magnetics@vishay.com
This document is subject to change without notice.
www.vishay.com
29
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IMS-2
Vishay Dale
Inductors, Commercial, Molded,
Shielded, Miniature, Axial Leaded
STANDARD ELECTRICAL SPECIFICATIONS
IND.
(μH)
TOL.
(%)
Q
TEST FREQUENCY L AND Q
(MHz)
SRF MIN.
(MHz) (1)
DCR MAX.
RATED DC CURRENT
(mA) (2)
MODEL
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
IMS-2
MIN.
()
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
40
41
43
45
48
49
50
53
54
55
55
57
36
38
40
40
40
41
42
44
44
45
45
40
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
130.0
115.0
105.0
95.0
90.0
80.0
75.0
70.0
60.0
55.0
53.0
50.0
35.0
30.0
26.0
24.0
21.0
20.0
19.0
16.0
15.0
13.0
11.0
10.5
0.73
0.86
0.95
1.1
1.2
1.3
1.5
2.4
2.9
3.2
3.6
4.0
3.0
3.4
3.8
4.9
5.8
6.5
247
228
217
202
193
185
173
136
124
118
111
106
122
115
108
96
88
83
75
69
64
61
59
51
6.8
8.2
10.0
12.0
15.0
18.0
22.0
27.0
33.0
39.0
47.0
56.0
68.0
82.0
100.0
7.9
9.3
11.0
12.0
13.0
16.8
Notes
(1)
(2)
Measured with full length lead
Rated DC current based on maximum temperature rise as shown in table
ORDERING INFORMATION
IMS-2
10 μH
10 %
ER
e2
MODEL
INDUCTANCE
VALUE
INDUCTANCE
TOLERANCE
PACKAGE
CODE
JEDEC LEAD (Pb)-FREE
STANDARD
GLOBAL PART NUMBER
I
M
S
0
2
E
R
1
0
0
K
MODEL
PACKAGE
CODE
INDUCTANCE
VALUE
INDUCTANCE
TOLERANCE
www.vishay.com
30
For technical questions, contact: magnetics@vishay.com
This document is subject to change without notice.
Document Number: 34045
Revision: 24-May-11
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号:
IMS02ER470J
General Fixed Inductor, 1 ELEMENT, 47 uH, IRON-CORE, GENERAL PURPOSE INDUCTOR, AXIAL LEADED, ROHS COMPLIANT
VISHAY
IMS02ERR22J
General Fixed Inductor, 1 ELEMENT, 0.22 uH, IRON-CORE, GENERAL PURPOSE INDUCTOR, AXIAL LEADED, ROHS COMPLIANT
VISHAY
IMS02ERR27J
General Fixed Inductor, 1 ELEMENT, 0.27 uH, IRON-CORE, GENERAL PURPOSE INDUCTOR, AXIAL LEADED, ROHS COMPLIANT
VISHAY
IMS02ERR47J
General Fixed Inductor, 1 ELEMENT, 0.47 uH, IRON-CORE, GENERAL PURPOSE INDUCTOR, AXIAL LEADED, ROHS COMPLIANT
VISHAY
IMS02ERR56J
General Fixed Inductor, 1 ELEMENT, 0.56 uH, IRON-CORE, GENERAL PURPOSE INDUCTOR, AXIAL LEADED, ROHS COMPLIANT
VISHAY
IMS02ERR68J
General Fixed Inductor, 1 ELEMENT, 0.68 uH, IRON-CORE, GENERAL PURPOSE INDUCTOR, AXIAL LEADED, ROHS COMPLIANT
VISHAY
IMS02ERR82J
General Fixed Inductor, 1 ELEMENT, 0.82 uH, IRON-CORE, GENERAL PURPOSE INDUCTOR, AXIAL LEADED, ROHS COMPLIANT
VISHAY
IMS02ES471K
General Fixed Inductor, 1 ELEMENT, 470 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, AXIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明