首页 |元器件品牌

LCE13-E3/54 [VISHAY]

Trans Voltage Suppressor Diode, 1500W, 13V V(RWM), Unidirectional, 1 Element, Silicon, ROHS COMPLIANT, PLASTIC, CASE 1.5KE, 2 PIN;
LCE13-E3/54
型号： LCE13-E3/54
厂家： VISHAY    VISHAY
描述：

Trans Voltage Suppressor Diode, 1500W, 13V V(RWM), Unidirectional, 1 Element, Silicon, ROHS COMPLIANT, PLASTIC, CASE 1.5KE, 2 PIN
文件： 总5页 (文件大小：78K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
LCE6.5 thru LCE28A  
Vishay General Semiconductor  
Low Capacitance TRANSZORB® Transient Voltage Suppressors  
FEATURES  
• Glass passivated chip junction  
• 1500 W peak pulse power capability with a  
10/1000 µs waveform, repetitive rate (duty  
cycle): 0.01 %  
• Excellent clamping capability  
• Very fast response time  
• Low incremental surge resistance  
Case Style 1.5KE  
• Solder dip 260 °C, 40 s  
• Component in accordance to RoHS 2002/95/EC  
and WEEE 2002/96/EC  
TYPICAL APPLICATIONS  
Use in sensitive electronics protection against voltage  
transients induced by inductive load switching  
and lighting on ICs, MOSFET, signal lines of sensor  
PRIMARY CHARACTERISTICS  
units for consumer, computer, industrial and  
telecommunication.  
VWM  
PPPM  
PD  
6.5 V to 28 V  
1500 W  
6.5 W  
MECHANICAL DATA  
Case: Molded epoxy body over passivated junction  
TJ max.  
175 °C  
Molding compound meets UL 94 V-0 flammability  
rating  
Base P/N-E3 - RoHS compliant, commercial grade  
Terminals: Matte tin plated leads, solderable per  
J-STD-002 and JESD22-B102  
E3 suffix meets JESD 201 class 1A whisker test  
Polarity: Color band denotes TVS cathode end  
MAXIMUM RATINGS (T = 25 °C unless otherwise noted)  
A
PARAMETER  
SYMBOL  
LIMIT  
1500  
UNIT  
W
Peak pulse power dissipation with a 10/1000 µs waveform (1)(2)  
Power dissipation on infinite heatsink at TL = 75 °C (Fig. 2)  
Peak power pulse surge current with a 10/1000 µs waveform (1)(3)  
Operating junction and storage temperature range  
PPPM  
PD  
6.5  
W
IPPM  
See next table  
- 65 to + 175  
A
TJ, TSTG  
°C  
Notes:  
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2  
(2) See Fig. 1  
(3) See Fig. 2  
Document Number: 88357  
Revision: 20-Oct-08  
For technical questions within your region, please contact one of the following:  
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com  
www.vishay.com  
1
LCE6.5 thru LCE28A  
Vishay General Semiconductor  
ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted)  
A
MAXIMUM  
PEAK  
PULSE  
MAXIMUM  
INVERSE  
BLOCKING INVERSE  
LEAKAGE BLOCKING  
CURRENT  
AT VWIB  
MINIMUM  
PEAK  
MAXIMUM  
REVERSE  
CURRENT LEAKAGE  
WORKING  
INVERSE  
BLOCKING  
VOLTAGE  
VWIB  
BREAKDOWN  
VOLTAGE  
VBR  
STAND-  
OFF  
VOLTAGE  
VWM  
MAXIMUM  
CLAMPING  
MAXIMUM  
JUNCTION  
TEST  
PART  
NUMBER  
VOLTAGE CURRENT CAPACITANCE  
AT IT  
mA  
AT  
VWM  
(V)  
AT IPP  
VC (V)  
(FIG 3)  
IPPM  
(A)  
AT 0 (V)  
(pF)  
VOLTAGE  
VPIB  
(V)  
ID (µA)  
(V)  
ID (mA)  
(V)  
MIN. MAX.  
7.22 8.82  
7.22 7.98  
7.78 9.51  
7.78 8.60  
8.33 10.2  
8.33 9.21  
8.89 10.9  
8.89 9.83  
9.44 11.5  
9.44 10.4  
10.0 12.2  
10.0 11.1  
11.1 13.6  
11.1 12.3  
12.2 14.9  
12.2 13.5  
13.3 16.3  
13.3 14.7  
14.4 17.6  
14.4 15.9  
15.6 19.1  
15.6 17.2  
16.7 20.4  
16.7 18.5  
17.8 21.8  
17.8 19.7  
18.9 23.1  
18.9 20.9  
20.0 24.4  
20.0 22.1  
22.2 27.1  
22.2 24.5  
24.4 29.8  
24.4 26.9  
26.7 32.6  
26.7 29.5  
28.9 35.3  
28.9 31.9  
31.1 38.0  
31.1 34.4  
LCE6.5  
LCE6.5A  
LCE7.0  
LCE7.0A  
LCE7.5  
LCE7.5A  
LCE8.0  
LCE8.0A  
LCE8.5  
LCE8.5A  
LCE9.0  
LCE9.0A  
LCE10  
6.5  
6.5  
7.0  
7.0  
7.5  
7.5  
8.0  
8.0  
8.5  
8.5  
9.0  
9.0  
10  
10  
11  
11  
12  
12  
13  
13  
14  
14  
15  
15  
16  
16  
17  
17  
18  
18  
20  
20  
22  
22  
24  
24  
26  
26  
28  
28  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1000  
1000  
500  
500  
250  
250  
100  
100  
50.0  
50.0  
10.0  
10.0  
5.0  
12.3  
11.2  
13.3  
12.0  
14.3  
12.9  
15.0  
13.6  
15.9  
14.4  
16.9  
15.4  
18.8  
17.0  
20.1  
18.2  
22.0  
19.9  
23.8  
21.5  
25.8  
23.2  
26.9  
24.4  
28.8  
26.0  
30.5  
27.6  
32.2  
29.2  
35.8  
32.4  
39.4  
35.5  
43.0  
38.9  
46.6  
42.1  
50.1  
45.5  
100  
100  
100  
100  
100  
100  
100  
100  
94  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
89  
97  
80  
LCE10A  
LCE11  
5.0  
88  
5.0  
74  
LCE11A  
LCE12  
5.0  
82  
5.0  
68  
LCE12A  
LCE13  
5.0  
75  
5.0  
63  
LCE13A  
LCE14  
5.0  
70  
5.0  
58  
LCE14A  
LCE15  
5.0  
65  
5.0  
56  
LCE15A  
LCE16  
5.0  
61  
5.0  
52  
LCE16A  
LCE17  
5.0  
57  
5.0  
49  
LCE17A  
LCE18  
5.0  
54  
5.0  
46  
LCE18A  
LCE20  
5.0  
51  
5.0  
42  
LCE20A  
LCE22  
5.0  
46  
5.0  
38  
LCE22A  
LCE24  
5.0  
42  
5.0  
35  
LCE24A  
LCE26  
5.0  
39  
5.0  
32  
LCE26A  
LCE28  
5.0  
36  
5.0  
30  
LCE28A  
5.0  
33  
Note:  
(1) All the above devices are UL listed for Telecom application protection 497B, file number E136766  
www.vishay.com  
2
For technical questions within your region, please contact one of the following:  
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com  
Document Number: 88357  
Revision: 20-Oct-08  
LCE6.5 thru LCE28A  
Vishay General Semiconductor  
ORDERING INFORMATION (Example)  
PREFERRED P/N  
UNIT WEIGHT (g)  
PREFERRED PACKAGE CODE  
BASE QUANTITY  
DELIVERY MODE  
LCE6.5-E3/54  
0.968  
54  
1400  
13" diameter paper tape and reel  
RATINGS AND CHARACTERISTICS CURVES  
(T = 25 °C unless otherwise noted)  
A
100  
10  
1
150  
100  
50  
TJ = 25 °C  
Pulse Width (td)  
is defined as the Point  
where the Peak Current  
decays to 50 % of IPPM  
tr = 10 µs  
Peak Value  
IPPM  
Half Value - IPP  
IPPM  
2
10/1000 µs Waveform  
as defined by R.E.A.  
td  
0.1  
0.1 µs  
0
1.0 µs  
10 µs  
100 µs  
1.0 ms  
10 ms  
0
1.0  
2.0  
t - Time (ms)  
3.0  
4.0  
td - Pulse Width  
Figure 1. Peak Pulse Power Rating Curve  
Figure 3. Pulse Waveform  
100  
75  
50  
25  
0
Power Dissipation  
Peak Power (Single Pulse)  
TJ = Initial Temperature  
Low Capacitance  
TVS  
L = 0.375" (9.5 mm)  
Lead Lengths  
Application Note: Device must be used with  
two units in parallel, opposite in polarity as  
shown in circuit for AC signal line protection.  
0
25  
50  
75  
100  
125  
150  
175  
TL - Lead Temperature (°C)  
Figure 2. Power Derating Curve  
Figure 4. AC Line Protection Application  
Document Number: 88357  
Revision: 20-Oct-08  
For technical questions within your region, please contact one of the following:  
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com  
www.vishay.com  
3
LCE6.5 thru LCE28A  
Vishay General Semiconductor  
Schematic  
Diode  
Transient  
Voltage  
Suppressor  
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)  
Case Style 1.5KE  
1.0 (25.4)  
MIN.  
0.210 (5.3)  
0.190 (4.8)  
DIA.  
0.375 (9.5)  
0.285 (7.2)  
1.0 (25.4)  
MIN.  
0.042 (1.07)  
0.038 (0.96)  
DIA.  
www.vishay.com  
4
For technical questions within your region, please contact one of the following:  
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com  
Document Number: 88357  
Revision: 20-Oct-08  
Legal Disclaimer Notice  
Vishay  
Disclaimer  
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE  
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,  
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other  
disclosure relating to any product.  
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or  
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all  
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,  
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular  
purpose, non-infringement and merchantability.  
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical  
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements  
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular  
product with the properties described in the product specification is suitable for use in a particular application. Parameters  
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All  
operating parameters, including typical parameters, must be validated for each customer application by the customer’s  
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,  
including but not limited to the warranty expressed therein.  
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining  
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.  
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree  
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and  
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay  
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to  
obtain written terms and conditions regarding products designed for such applications.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by  
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.  
Document Number: 91000  
Revision: 11-Mar-11  
www.vishay.com  
1

相关型号：

LCE13-E3/60

 Trans Voltage Suppressor Diode, 1500W, 13V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY

LCE13-E3/71

 Trans Voltage Suppressor Diode, 1500W, 13V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY

LCE13-E3/73

 暂无描述
VISHAY

LCE13-E3/92

 Trans Voltage Suppressor Diode, 1500W, 13V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY

LCE13-E3/93

 Trans Voltage Suppressor Diode, 1500W, 13V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY

LCE13-T

 Transient Suppressor,
MCC

LCE13/4

 Trans Voltage Suppressor Diode, 1500W, 13V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY

LCE13/4-E3

 DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY

LCE13/4E

 Trans Voltage Suppressor Diode, 1500W, 13V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY

LCE13/4E-E3

 DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY

LCE13/4F

 Trans Voltage Suppressor Diode, 1500W, 13V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY

LCE13/4G

 Trans Voltage Suppressor Diode, 1500W, 13V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明