LH1511BAB_11 [VISHAY]
1 Form B Solid State Relay; 1表格B固态继电器
| 型号： | LH1511BAB_11 |
| 厂家： | 
VISHAY |
| 描述： | 1 Form B Solid State Relay |
| 文件： | 总4页 (文件大小：116K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LH1511BAB, LH1511BABTR, LH1511BT
Vishay Semiconductors
1 Form B Solid State Relay
FEATURES
SMD
S'
S'
• Isolation test voltage 3750 VRMS
• Typical RON 10
• Load voltage 200 V
DC
5
S
6
S'
4
• Clean bounce free switching
• Low power consumption
• SMD lead available on tape and reel
DIP
• Compliant ot RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
1
2
3
i179041-2
APPLICATIONS
• General telecom switching
• Security equipment
• Instrumentation
DESCRIPTION
The LH1511 relays are SPST normally closed switches
(1 form B) that can replace electromechanical relays in many
applications. The relays are constructed as a multi-chip
hybrid device. Actuation control is via an infrared LED. The
output switch is a combination of a photodiode array with
MOSFET switches and control circuity. The relays can be
configured for AC/DC or DC only operation.
• Industrial controls
AGENCY APPROVALS
UL1577: file no. E52744
CSA:
certification 093751
ORDERING INFORMATION
SMD
DIP
L
H
1
5
1
1
B
#
#
T
R
PART NUMBER
ELECTR.
VARIATION
PACKAGE
CONFIG.
TAPE AND
REEL
> 0.1 mm
7.62 mm
PACKAGE
UL, CSA
LH1511BAB
SMD-6, gullwing, tubes
SMD-6, gullwing, tape and reel
DIP-6, tubes
LH1511BABTR
LH1511BT
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
LED continuous forward current
LED reverse voltage
IF
50
8
mA
V
IR 10 μA
IL 50 μA
VR
OUTPUT
DC or peak AC load voltage
Continuous DC load current - bidirectional
Continuous DC load current - unidirectional
Peak load current (single shot)
SSR
VL
IL
200
200
300
400
V
mA
mA
mA
IL
t = 100 ms
IP
Ambient temperature range
Storage temperature range
Pin soldering temperature (1)
Input to output isolation voltage
Output power dissipation (continuous)
Tamb
Tstg
- 40 to + 85
- 40 to + 125
260
°C
°C
t = 10 s max.
Tsld
°C
t = 1 s, IISO = 10 μA max.
VISO
Pdiss
3750
VRMS
mW
550
Notes
•
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through
hole devices (DIP).
(1)
Document Number: 83811
Rev. 1.6, 20-May-11
For technical questions, contact: optocoupleranswers@vishay.com
This document is subject to change without notice.
www.vishay.com
1
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LH1511BAB, LH1511BABTR, LH1511BT
1 Form B Solid State Relay
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
INPUT
LED forward current, switch turn-on
LED forward current, switch turn-off
LED forward voltage
IL = 200 mA, t = 10 ms
VL = 150 V
IFon
IFoff
VF
0.2
0.9
1
mA
mA
V
2
IF = 10 mA
1.15
1.26
1.45
OUTPUT
On-resistance, AC/DC: pin 4, 6 (+) to 5 (-)
On-resistance, DC: pin 4, 6 (+) to 5 (-)
Off-resistance
IF = 0 mA, IL = 50 mA
IF = 0 mA, IL = 100 mA
IF = 5 mA, VL = 100 V
IF = 5 mA, VL = 200 V
IF = 5 mA, VL = 50 V
RON
RON
ROFF
IO
10
2.5
1.4
0.07
50
15
3.75
0.1
G
μA
pF
Off-state leakage current
Output capacitance
1
CO
TRANSFER
Capacitance (input to output)
VISO = 1 V
CIO
3
pF
Note
•
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluations. Typical values are for information only and are not part of the testing requirements.
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Turn-on time
Turn-off time
TEST CONDITION
IF = 10 mA, IL = 50 mA
IF = 10 mA, IL = 50 mA
SYMBOL
MIN.
TYP.
1.2
1
MAX.
UNIT
ms
ton
toff
3
3
ms
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
150
120
90
60
30
0
- 40 - 20
0
20
40
60
80
Ambient Temperature (°C)
ilh1511bt_00
Fig. 1 - Recommended Operating Conditions
www.vishay.com
2
For technical questions, contact: optocoupleranswers@vishay.com
This document is subject to change without notice.
Document Number: 83811
Rev. 1.6, 20-May-11
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LH1511BAB, LH1511BABTR, LH1511BT
1 Form B Solid State Relay
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
DIP
8.38
2.54
6.35
9.14
ISO method A
0.46
6 to 0.80 dia.
2.54
7.62
3.30
6.35
7.24 typ.
9.14
9.14
5.08
i178015-1
SMD
8.38
2.54
2.54
8.31
6.35
9.53
1.90
0.46
1.50
7.62
3.30
4.45
ISO method A
0.64 typ.
i178016-1
0.25 typ.
PACKAGE MARKING (example)
LH1511
V YWW 68
Note
•
Tape and reel suffix (TR) is not part of the package marking.
Document Number: 83811
Rev. 1.6, 20-May-11
For technical questions, contact: optocoupleranswers@vishay.com
This document is subject to change without notice.
www.vishay.com
3
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
相关型号：
©2020 ICPDF网 联系我们和版权申明