LM4040D25IDCKR_技术文档

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

FEATURES

DBZ (SOT-23) PACKAGE

•

Fixed Output Voltages of 2.048 V, 2.5 V, 3 V,

(TOP VIEW)

4.096 V, 5 V, 8.192 V, and 10 V

1

•

Tight Output Tolerances and Low

Temperature Coefficient

CATHODE

ANODE

3*

2

– Max 0.1%, 100 ppm/°C – A Grade

– Max 0.2%, 100 ppm/°C – B Grade

– Max 0.5%, 100 ppm/°C – C Grade

– Max 1.0%, 150 ppm/°C – D Grade

Low Output Noise…35 µV_RMSTyp

* Pin 3 is attached to substrate and must be

connected to ANODE or left open.

DCK (SC-70) PACKAGE

(TOP VIEW)

•

Wide Operating Current Range…45 µA Typ to

15 mA

1

5

4

ANODE

NC

•

Stable With All Capacitive Loads; No Output

Capacitor Required

2

3

CATHODE

Available in Extended Temperature

Range…–40°C to 125°C

NC – No internal connection

APPLICATIONS

LP (TO-92/TO-226) PACKAGE

(TOP VIEW)

•

Data-Acquisition Systems

Power Supplies and Power-Supply Monitors

Instrumentation and Test Equipment

Process Controls

Precision Audio

Automotive Electronics

ANODE

CATHODE

NC

Energy Management

Battery-Powered Equipment

NC – No internal connection

DESCRIPTION/ORDERING INFORMATION

The LM4040 series of shunt voltage references are versatile, easy-to-use references that cater to a vast array of

applications. The 2-pin fixed-output device requires no external capacitors for operation and is stable with all

capacitive loads. Additionally, the reference offers low dynamic impedance, low noise, and low temperature

coefficient to ensure a stable output voltage over a wide range of operating currents and temperatures. The

LM4040 uses fuse and Zener-zap reverse breakdown voltage trim during wafer sort to offer four output voltage

tolerances, ranging from 0.1% (max) for the A grade to 1% (max) for the D grade. Thus, a great deal of flexibility

is offered to designers in choosing the best cost-to-performance ratio for their applications.

Packaged in space-saving SC-70 and SOT-23-3 packages and requiring a minimum current of 45 µA (typ), the

LM4040 also is ideal for portable applications. The LM4040xI is characterized for operation over an ambient

temperature range of –40°C to 85°C. The LM4040xQ is characterized for operation over an ambient temperature

range of –40°C to 125°C.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

ORDERING INFORMATION

DEVICE

GRADE

ORDERABLE

PART NUMBER

TOP-SIDE

T_A

V_KA

PACKAGE⁽¹⁾

MARKING⁽²⁾

SC-70 (DCK)

Reel of 3000

LM4040A20IDCKR

LM4040A20IDBZR

LM4040A20IDBZT

LM4040A20ILP

MS_

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

SOT-23-3 (DBZ)

4MC_

2.048 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

P2_

LM4040A20ILPR

LM4040A25IDCKR

LM4040A25IDBZR

LM4040A25IDBZT

LM4040A25ILP

SOT-23-3 (DBZ)

4NG_

2.5 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

P9_

LM4040A25ILPR

LM4040A30IDCKR

LM4040A30IDBZR

LM4040A30IDBZT

LM4040A30ILP

SOT-23-3 (DBZ)

4M6_

3 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

P4_

LM4040A30ILPR

LM4040A41IDCKR

LM4040A41IDBZR

LM4040A41IDBZT

LM4040A41ILP

A grade:

0.1% initial

accuracy

and

SOT-23-3 (DBZ)

4M2_

–40°C to 85°C

4.096 V

100 ppm/°C

temperature

coefficient

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

N5_

LM4040A41ILPR

LM4040A50IDCKR

LM4040A50IDBZR

LM4040A50IDBZT

LM4040A50ILP

SOT-23-3 (DBZ)

4NA_

5 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

PD_

LM4040A50ILPR

LM4040A82IDCKR

LM4040A82IDBZR

LM4040A82IDBZT

LM4040A82ILP

SOT-23-3 (DBZ)

4NL_

8.192 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

PH_

LM4040A82ILPR

LM4040A10IDCKR

LM4040A10IDBZR

LM4040A10IDBZT

LM4040A10ILP

SOT-23-3 (DBZ)

4NQ_

10 V

TO-92/TO-226 (LP)

PREVIEW

LM4040A10ILPR

(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at

www.ti.com/sc/package.

(2) DBZ/DCK: The actual top-side marking has one additional character that designates the assembly/test site.

2

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

ORDERING INFORMATION (continued)

DEVICE

GRADE

ORDERABLE

PART NUMBER

TOP-SIDE

T_A

V_KA

PACKAGE⁽¹⁾

MARKING⁽²⁾

SC-70 (DCK)

Reel of 3000

LM4040B20IDCKR

LM4040B20IDBZR

LM4040B20IDBZT

LM4040B20ILP

MT_

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

SOT-23-3 (DBZ)

4MD_

2.048 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

P3_

LM4040B20ILPR

LM4040B25IDCKR

LM4040B25IDBZR

LM4040B25IDBZT

LM4040B25ILP

SOT-23-3 (DBZ)

4NH_

2.5 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

PA_

LM4040B25ILPR

LM4040B30IDCKR

LM4040B30IDBZR

LM4040B30IDBZT

LM4040B30ILP

SOT-23-3 (DBZ)

4M7_

3 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

P5_

LM4040B30ILPR

LM4040B41IDCKR

LM4040B41IDBZR

LM4040B41IDBZT

LM4040B41ILP

B grade:

0.2% initial

accuracy

and

SOT-23-3 (DBZ)

4M3_

–40°C to 85°C

4.096 V

100 ppm/°C

temperature

coefficient

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

MX_

LM4040B41ILPR

LM4040B50IDCKR

LM4040B50IDBZR

LM4040B50IDBZT

LM4040B50ILP

SOT-23-3 (DBZ)

4NB_

5 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

PE_

LM4040B50ILPR

LM4040B82IDCKR

LM4040B82IDBZR

LM4040B82IDBZT

LM4040B82ILP

SOT-23-3 (DBZ)

4NM_

8.192 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

PJ_

LM4040B82ILPR

LM4040B10IDCKR

LM4040B10IDBZR

LM4040B10IDBZT

LM4040B10ILP

SOT-23-3 (DBZ)

4NR_

10 V

TO-92/TO-226 (LP)

PREVIEW

LM4040B10ILPR

3

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

ORDERING INFORMATION (continued)

DEVICE

GRADE

ORDERABLE

PART NUMBER

TOP-SIDE

T_A

V_KA

PACKAGE⁽¹⁾

MARKING⁽²⁾

SC-70 (DCK)

Reel of 3000

LM4040C20IDCKR

LM4040C20IDBZR

LM4040C20IDBZT

LM4040C20ILP

MV_

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

SOT-23-3 (DBZ)

4MQ_

2.048 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

M4_

LM4040C20ILPR

LM4040C25IDCKR

LM4040C25IDBZR

LM4040C25IDBZT

LM4040C25ILP

SOT-23-3 (DBZ)

4MU_

2.5 V

TO-92/TO-226 (LP)

SC-70 (DCK)

NCF25I

PB_

LM4040C25ILPR

LM4040C30IDCKR

LM4040C30IDBZR

LM4040C30IDBZT

LM4040C30ILP

SOT-23-3 (DBZ)

4M8_

3 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

P6_

LM4040C30ILPR

LM4040C41IDCKR

LM4040C41IDBZR

LM4040C41IDBZT

LM4040C41ILP

C grade:

0.5% initial

accuracy

and

SOT-23-3 (DBZ)

4M4_

–40°C to 85°C

4.096 V

100 ppm/°C

temperature

coefficient

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

MZ_

LM4040C41ILPR

LM4040C50IDCKR

LM4040C50IDBZR

LM4040C50IDBZT

LM4040C50ILP

SOT-23-3 (DBZ)

4NC_

5 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

PF_

LM4040C50ILPR

LM4040C82IDCKR

LM4040C82IDBZR

LM4040C82IDBZT

LM4040C82ILP

SOT-23-3 (DBZ)

4NN_

8.192 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

PK_

LM4040C82ILPR

LM4040C10IDCKR

LM4040C10IDBZR

LM4040C10IDBZT

LM4040C10ILP

SOT-23-3 (DBZ)

4NS_

10 V

TO-92/TO-226 (LP)

NFC10I

LM4040C10ILPR

4

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

ORDERING INFORMATION (continued)

DEVICE

GRADE

ORDERABLE

PART NUMBER

TOP-SIDE

T_A

V_KA

PACKAGE⁽¹⁾

MARKING⁽²⁾

SC-70 (DCK)

Reel of 3000

LM4040D20IDCKR

LM4040D20IDBZR

LM4040D20IDBZT

LM4040D20ILP

MW_

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

SOT-23-3 (DBZ)

4MV_

2.048 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

ME_

LM4040D20ILPR

LM4040D25IDCKR

LM4040D25IDBZR

LM4040D25IDBZT

LM4040D25ILP

SOT-23-3 (DBZ)

4ME_

2.5 V

TO-92/TO-226 (LP)

SC-70 (DCK)

NFD25I

PC_

LM4040D25ILPR

LM4040D30IDCKR

LM4040D30IDBZR

LM4040D30IDBZT

LM4040D30ILP

SOT-23-3 (DBZ)

4M9_

3 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

P7_

LM4040D30ILPR

LM4040D41IDCKR

LM4040D41IDBZR

LM4040D41IDBZT

LM4040D41ILP

D grade:

1.0% initial

accuracy

and

SOT-23-3 (DBZ)

4M5_

–40°C to 85°C

4.096 V

150 ppm/°C

temperature

coefficient

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

M4_

LM4040D41ILPR

LM4040D50IDCKR

LM4040D50IDBZR

LM4040D50IDBZT

LM4040D50ILP

SOT-23-3 (DBZ)

4ND_

5 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

PG_

LM4040D50ILPR

LM4040D82IDCKR

LM4040D82IDBZR

LM4040D82IDBZT

LM4040D82ILP

SOT-23-3 (DBZ)

4NP_

8.192 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

PL_

LM4040D82ILPR

LM4040D10IDCKR

LM4040D10IDBZR

LM4040D10IDBZT

LM4040D10ILP

SOT-23-3 (DBZ)

4NT_

10 V

TO-92/TO-226 (LP)

NFD10I

LM4040D10ILPR

5

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

ORDERING INFORMATION (continued)

DEVICE

GRADE

ORDERABLE

PART NUMBER

TOP-SIDE

T_A

V_KA

PACKAGE⁽¹⁾

MARKING⁽²⁾

Reel of 3000

LM4040C20QDBZR

LM4040C20QDBZT

LM4040C25QDBZR

LM4040C25QDBZT

LM4040C30QDBZR

LM4040C30QDBZT

LM4040C50QDBZR

LM4040C50QDBZT

LM4040D20QDBZR

LM4040D20QDBZT

LM4040D25QDBZR

LM4040D25QDBZT

LM4040D30QDBZR

LM4040D30QDBZT

LM4040D50QDBZR

LM4040D50QDBZT

2.048 V

4MW_

Reel of 250

Reel of 3000

Reel of 250

Reel of 3000

Reel of 250

Reel of 3000

Reel of 250

Reel of 3000

Reel of 250

Reel of 3000

Reel of 250

Reel of 3000

Reel of 250

Reel of 3000

Reel of 250

C grade:

0.5% initial

accuracy

and

100 ppm/°C

temperature

coefficient

2.5 V

3 V

4MA_

4NJ_

4NE_

4MY_

4MB_

4NK_

4NF_

SOT-23-3 (DBZ)

5 V

–40°C to 125°C

2.048 V

2.5 V

3 V

D grade:

1.0% initial

accuracy

and

150 ppm/°C

temperature

coefficient

SOT-23-3 (DBZ)

5 V

6

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

FUNCTIONAL BLOCK DIAGRAM

CATHODE

+

_

ANODE

Absolute Maximum Ratings⁽¹⁾

over free-air temperature range (unless otherwise noted)

MIN

MAX

25

UNIT

I_Z

Continuous cathode current

–10

mA

DBZ package

DCK package

LP package

206

252

156

150

θ_JA

Package thermal impedance⁽²⁾⁽³⁾

°C/W

T_J

Operating virtual junction temperature

Storage temperature range

°C

T_stg

–65

(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating

conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) Maximum power dissipation is a function of T_J(max), θ_JA, and T_A. The maximum allowable power dissipation at any allowable ambient

temperature is P_D= (T_J(max) – T_A)/θ_JA. Operating at the absolute maximum T_Jof 150°C can affect reliability.

(3) The package thermal impedance is calculated in accordance with JESD 51-7.

Recommended Operating Conditions

MIN

MAX

12

UNIT

(1)

I_Z

Cathode current

mA

LM4040xxxI

LM4040xxxQ

–40

85

T_A

Free-air temperature

°C

125

(1) See parametric tables

7

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

LM4040x20I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040A20I

LM4040B20I

PARAMETER

TEST CONDITIONS

I_Z= 100 µA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

2.048

V

–2

2

15

75

80

–4.1

–17

4.1

17

75

80

Reverse breakdown voltage

tolerance

∆V_Z

I_Z= 100 µA

mV

Full range

25°C

–15

45

I_Z,min

Minimum cathode current

µA

Full range

25°C

I_Z= 10 mA

±20

±15

±20

±15

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

I_Z= 100 µA

I_Z,min< I_Z< 1 mA

±15

25°C

0.3

0.8

1

0.3

0.8

1

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

mV

2.5

6

2.5

6

1 mA < I_Z< 15 mA

Full range

8

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.3

35

0.8

0.3

35

0.8

Ω

I_Z= 100 µA,

10 Hz ≤ f ≤ 10 kHz

µV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 µA

Long-term stability of reverse

breakdown voltage

120

ppm

%

V_HYSTThermal hysteresis⁽¹⁾

∆T_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

8

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

LM4040x20I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040C20I

LM4040D20I

PARAMETER

TEST CONDITIONS

I_Z= 100 µA

T_A

UNIT

V

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

2.048

–10

–23

10

23

75

80

–20

–40

20

40

75

80

Reverse breakdown voltage

tolerance

∆V_Z

I_Z= 100 µA

mV

Full range

25°C

45

I_Z,min

Minimum cathode current

µA

Full range

25°C

I_Z= 10 mA

±20

±15

±20

±15

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 100 µA

I_Z,min< I_Z< 1 mA

±15

25°C

0.3

0.8

1

0.3

1

1.2

8

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

mV

2.5

6

2.5

1 mA < I_Z< 15 mA

Full range

8

10

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.3

35

0.9

0.3

35

1.1

Ω

I_Z= 100 µA,

10 Hz ≤ f ≤ 10 kHz

µV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 µA

Long-term stability of reverse

breakdown voltage

120

ppm

%

V_HYSTThermal hysteresis⁽¹⁾

∆T_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

9

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

LM4040x20Q Electrical Characteristics

at extended temperature range, full-range T_A= –40°C to 125°C (unless otherwise noted)

LM4040C20Q

LM4040D20Q

PARAMETER

TEST CONDITIONS

I_Z= 100 µA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

2.048

V

–10

–30

10

30

75

80

–20

–50

20

50

75

80

Reverse breakdown voltage

tolerance

∆V_Z

I_Z= 100 µA

mV

Full range

25°C

45

I_Z,min

Minimum cathode current

µA

Full range

25°C

I_Z= 10 mA

±20

±15

±20

±15

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 100 µA

I_Z,min< I_Z< 1 mA

±15

25°C

0.3

0.8

1

0.3

1

1.2

8

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

mV

2.5

6

2.5

1 mA < I_Z< 15 mA

Full range

8

10

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.3

35

0.9

0.3

35

1.1

Ω

I_Z= 100 µA,

10 Hz ≤ f ≤ 10 kHz

µV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 µA

Long-term stability of reverse

breakdown voltage

120

ppm

%

V_HYSTThermal hysteresis⁽¹⁾

∆T_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

10

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

LM4040x25I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040A25I

LM4040B25I

PARAMETER

TEST CONDITIONS

I_Z= 100 µA

T_A

UNIT

V

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

2.5

–2.5

–19

2.5

19

75

80

–5

5

21

75

80

Reverse breakdown voltage

tolerance

∆V_Z

I_Z= 100 µA

mV

Full range

25°C

–21

45

I_Z,min

Minimum cathode current

µA

Full range

25°C

I_Z= 10 mA

±20

±15

±20

±15

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

I_Z= 100 µA

I_Z,min< I_Z< 1 mA

±15

25°C

0.3

0.8

1

0.3

0.8

1

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

mV

2.5

6

2.5

6

1 mA < I_Z< 15 mA

Full range

8

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.3

35

0.8

0.3

35

0.8

Ω

I_Z= 100 µA,

10 Hz ≤ f ≤ 10 kHz

µV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 µA

Long-term stability of reverse

breakdown voltage

120

ppm

%

V_HYSTThermal hysteresis⁽¹⁾

∆T_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

11

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

LM4040x25I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040C25I

LM4040D25I

PARAMETER

TEST CONDITIONS

I_Z= 100 µA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

2.5

V

–12

–29

12

29

75

80

–25

–49

25

49

75

80

Reverse breakdown voltage

tolerance

∆V_Z

I_Z= 100 µA

mV

Full range

25°C

45

I_Z,min

Minimum cathode current

µA

Full range

25°C

I_Z= 10 mA

±20

±15

±20

±15

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 100 µA

I_Z,min< I_Z< 1 mA

±15

25°C

0.3

0.8

1

0.3

1

1.2

8

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

mV

2.5

6

2.5

1 mA < I_Z< 15 mA

Full range

8

10

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.3

35

0.9

0.3

35

1.1

Ω

I_Z= 100 µA,

10 Hz ≤ f ≤ 10 kHz

µV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 µA

Long-term stability of reverse

breakdown voltage

120

ppm

%

V_HYSTThermal hysteresis⁽¹⁾

∆T_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

12

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

LM4040x25Q Electrical Characteristics

at extended temperature range, full-range T_A= –40°C to 125°C (unless otherwise noted)

LM4040C25Q

LM4040D25Q

PARAMETER

TEST CONDITIONS

I_Z= 100 µA

T_A

UNIT

V

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

2.5

–12

–38

12

38

75

80

–25

–63

25

63

75

80

Reverse breakdown voltage

tolerance

∆V_Z

I_Z= 100 µA

mV

Full range

25°C

45

I_Z,min

Minimum cathode current

µA

Full range

25°C

I_Z= 10 mA

±20

±15

±20

±15

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 100 µA

I_Z,min< I_Z< 1 mA

±15

25°C

0.3

0.8

1

0.3

1

1.2

8

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

mV

2.5

6

2.5

1 mA < I_Z< 15 mA

Full range

8

10

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.3

35

0.9

0.3

35

1.1

Ω

I_Z= 100 µA,

10 Hz ≤ f ≤ 10 kHz

µV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 µA

Long-term stability of reverse

breakdown voltage

120

ppm

%

V_HYSTThermal hysteresis⁽¹⁾

∆T_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

13

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

LM4040x30I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040A30I

LM4040B30I

PARAMETER

TEST CONDITIONS

I_Z= 100 µA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

3

V

–3

3

22

77

82

–6

6

26

77

82

Reverse breakdown voltage

tolerance

∆V_Z

I_Z= 100 µA

mV

Full range

25°C

–22

–26

47

I_Z,min

Minimum cathode current

µA

Full range

25°C

I_Z= 10 mA

±20

±15

±20

±15

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

I_Z= 100 µA

I_Z,min< I_Z< 1 mA

±15

25°C

0.6

0.8

1.1

6

0.6

0.8

1.1

6

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

mV

2.7

1 mA < I_Z< 15 mA

Full range

9

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.4

35

0.9

0.4

35

0.9

Ω

I_Z= 100 µA,

10 Hz ≤ f ≤ 10 kHz

µV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 µA

Long-term stability of reverse

breakdown voltage

120

ppm

%

V_HYSTThermal hysteresis⁽¹⁾

∆T_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

14

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

LM4040x30I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040C30I

LM4040D30I

PARAMETER

TEST CONDITIONS

I_Z= 100 µA

T_A

UNIT

V

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

3

–15

–34

15

34

77

82

–30

–59

30

59

77

82

Reverse breakdown voltage

tolerance

∆V_Z

I_Z= 100 µA

mV

Full range

25°C

45

I_Z,min

Minimum cathode current

µA

Full range

25°C

I_Z= 10 mA

±20

±15

±20

±15

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 100 µA

I_Z,min< I_Z< 1 mA

±15

25°C

0.4

0.8

1.1

6

1.4

1

1.3

8

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

mV

2.7

1 mA < I_Z< 15 mA

Full range

9

11

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.4

35

0.9

0.4

35

1.2

Ω

I_Z= 100 µA,

10 Hz ≤ f ≤ 10 kHz

µV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 µA

Long-term stability of reverse

breakdown voltage

120

ppm

%

V_HYSTThermal hysteresis⁽¹⁾

∆T_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

15

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

LM4040x30Q Electrical Characteristics

at extended temperature range, full-range T_A= –40°C to 125°C (unless otherwise noted)

LM4040C30Q

LM4040D30Q

PARAMETER

TEST CONDITIONS

I_Z= 100 µA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

3

V

–15

–45

15

45

77

82

–30

–75

30

75

77

82

Reverse breakdown voltage

tolerance

∆V_Z

I_Z= 100 µA

mV

Full range

25°C

47

I_Z,min

Minimum cathode current

µA

Full range

25°C

I_Z= 10 mA

±20

±15

±20

±15

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 100 µA

I_Z,min< I_Z< 1 mA

±15

25°C

0.4

0.8

1.1

6

0.4

1.1

1.3

8

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

mV

2.7

1 mA < I_Z< 15 mA

Full range

9

11

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.4

35

0.9

0.4

35

1.2

Ω

I_Z= 100 µA,

10 Hz ≤ f ≤ 10 kHz

µV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 µA

Long-term stability of reverse

breakdown voltage

120

ppm

%

V_HYSTThermal hysteresis⁽¹⁾

∆T_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

16

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

LM4040x41I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040A41I

LM4040B41I

PARAMETER

TEST CONDITIONS

I_Z= 100 µA

T_A

UNIT

V

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

4.096

–4.1

–31

4.1

31

83

88

–8.2

–35

8.2

35

83

88

Reverse breakdown voltage

tolerance

∆V_Z

I_Z= 100 µA

mV

Full range

25°C

50

I_Z,min

Minimum cathode current

µA

Full range

25°C

I_Z= 10 mA

±30

±20

±30

±20

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

I_Z= 100 µA

I_Z,min< I_Z< 1 mA

±20

25°C

0.5

0.9

1.2

7

0.5

0.9

1.2

7

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

mV

3

1 mA < I_Z< 15 mA

Full range

10

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.5

80

1

0.5

80

1

Ω

I_Z= 100 µA,

10 Hz ≤ f ≤ 10 kHz

µV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 µA

Long-term stability of reverse

breakdown voltage

120

ppm

%

V_HYSTThermal hysteresis⁽¹⁾

∆T_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

17

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

LM4040x41I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040C41I

LM4040D41I

PARAMETER

TEST CONDITIONS

I_Z= 100 µA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

4.096

V

–20

–47

20

47

83

88

–41

–81

41

81

83

88

Reverse breakdown voltage

tolerance

∆V_Z

I_Z= 100 µA

mV

Full range

25°C

50

I_Z,min

Minimum cathode current

µA

Full range

25°C

I_Z= 10 mA

±30

±20

±30

±20

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 100 µA

I_Z,min< I_Z< 1 mA

±20

25°C

0.5

0.9

1.2

7

0.5

1.2

1.5

9

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

mV

3

1 mA < I_Z< 15 mA

Full range

10

13

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.5

80

1

0.5

80

1.3

Ω

I_Z= 100 µA,

10 Hz ≤ f ≤ 10 kHz

µV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 µA

Long-term stability of reverse

breakdown voltage

120

ppm

%

V_HYSTThermal hysteresis⁽¹⁾

∆T_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

18

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

LM4040x50I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040A50I

LM4040B50I

PARAMETER

TEST CONDITIONS

I_Z= 100 µA

T_A

UNIT

V

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

5

–5

5

38

89

95

–10

–43

10

43

89

95

Reverse breakdown voltage

tolerance

∆V_Z

I_Z= 100 µA

mV

Full range

25°C

–38

65

I_Z,min

Minimum cathode current

µA

Full range

25°C

I_Z= 10 mA

±30

±20

±30

±20

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

I_Z= 100 µA

I_Z,min< I_Z< 1 mA

±20

25°C

0.5

1

1.4

8

0.5

1

1.4

8

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

mV

3.5

1 mA < I_Z< 15 mA

Full range

12

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.5

80

1.1

0.5

80

1.1

Ω

I_Z= 100 µA,

10 Hz ≤ f ≤ 10 kHz

µV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 µA

Long-term stability of reverse

breakdown voltage

120

ppm

%

V_HYSTThermal hysteresis⁽¹⁾

∆T_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

19

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

LM4040x50I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040C50I

LM4040D50I

PARAMETER

TEST CONDITIONS

I_Z= 100 µA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

5

V

–25

–58

25

58

89

95

–50

–99

50

99

89

95

Reverse breakdown voltage

tolerance

∆V_Z

I_Z= 100 µA

mV

Full range

25°C

65

I_Z,min

Minimum cathode current

µA

Full range

25°C

I_Z= 10 mA

±30

±20

±30

±20

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 100 µA

I_Z,min< I_Z< 1 mA

±20

25°C

0.5

1

1.4

8

0.5

1.3

1.8

10

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

mV

3.5

1 mA < I_Z< 15 mA

Full range

12

15

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.5

80

1.1

0.5

80

1.5

Ω

I_Z= 100 µA,

10 Hz ≤ f ≤ 10 kHz

µV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 µA

Long-term stability of reverse

breakdown voltage

120

ppm

%

V_HYSTThermal hysteresis⁽¹⁾

∆T_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

20

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

LM4040x50Q Electrical Characteristics

at extended temperature range, full-range T_A= –40°C to 125°C (unless otherwise noted)

LM4040C50Q

LM4040D50Q

PARAMETER

TEST CONDITIONS

I_Z= 100 µA

T_A

UNIT

V

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

5

–25

–75

25

75

89

95

–50

50

125

89

Reverse breakdown voltage

tolerance

∆V_Z

I_Z= 100 µA

mV

Full range

25°C

–125

65

I_Z,min

Minimum cathode current

µA

Full range

25°C

95

I_Z= 10 mA

±30

±20

±30

±20

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 100 µA

I_Z,min< I_Z< 1 mA

±20

25°C

0.5

1

1.4

8

0.5

1

1.8

8

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

mV

3.5

1 mA < I_Z< 15 mA

Full range

12

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.5

80

1.1

0.5

80

1.1

Ω

I_Z= 100 µA,

10 Hz ≤ f ≤ 10 kHz

µV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 µA

Long-term stability of reverse

breakdown voltage

120

ppm

%

V_HYSTThermal hysteresis⁽¹⁾

∆T_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

21

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

LM4040x82I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040A82I

LM4040B82I

PARAMETER

TEST CONDITIONS

I_Z= 150 µA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

8.192

V

–8.2

–61

8.2

61

–16

–70

16

70

Reverse breakdown voltage

tolerance

∆V_Z

I_Z= 150 µA

mV

Full range

25°C

67

106

110

67

106

110

I_Z,min

Minimum cathode current

µA

Full range

25°C

I_Z= 10 mA

±40

±20

±40

±20

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

I_Z= 150 µA

I_Z,min< I_Z< 1 mA

±20

25°C

0.6

1.3

2.5

10

0.6

1.6

2.5

10

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

mV

7

1 mA < I_Z< 15 mA

Full range

18

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.6

1.5

0.6

1.5

Ω

I_Z= 150 µA,

10 Hz ≤ f ≤ 10 kHz

130

µV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 150 µA

Long-term stability of reverse

breakdown voltage

120

ppm

%

V_HYSTThermal hysteresis⁽¹⁾

∆T_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

22

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

LM4040x82I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040C82I

LM4040D82I

PARAMETER

TEST CONDITIONS

I_Z= 150 µA

T_A

UNIT

V

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

8.192

–41

–94

41

94

–82

82

162

111

115

Reverse breakdown voltage

tolerance

∆V_Z

I_Z= 150 µA

mV

Full range

25°C

–162

67

106

110

67

I_Z,min

Minimum cathode current

µA

Full range

25°C

I_Z= 10 mA

±40

±20

±40

±20

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 150 µA

I_Z,min< I_Z< 1 mA

±20

25°C

0.6

1.3

2.5

10

0.6

1.7

3

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

mV

7

15

24

1 mA < I_Z< 15 mA

Full range

18

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.6

1.5

0.6

1.9

Ω

I_Z= 150 µA,

10 Hz ≤ f ≤ 10 kHz

130

µV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 150 µA

Long-term stability of reverse

breakdown voltage

120

ppm

%

V_HYSTThermal hysteresis⁽¹⁾

∆T_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

23

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

LM4040x10I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040A10I

LM4040B10I

PARAMETER

TEST CONDITIONS

I_Z= 150 µA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

10

V

–10

–75

10

75

–20

–85

20

85

Reverse breakdown voltage

tolerance

∆V_Z

I_Z= 150 µA

mV

Full range

25°C

75

120

125

75

120

125

I_Z,min

Minimum cathode current

µA

Full range

25°C

I_Z= 10 mA

±40

±20

±40

±20

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

I_Z= 150 µA

I_Z,min< I_Z< 1 mA

±20

25°C

0.8

1.5

3.5

14

0.8

1.5

3.5

14

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

mV

8

1 mA < I_Z< 15 mA

Full range

24

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.7

1.7

0.7

1.7

Ω

I_Z= 150 µA,

10 Hz ≤ f ≤ 10 kHz

180

µV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 150 µA

Long-term stability of reverse

breakdown voltage

120

ppm

%

V_HYSTThermal hysteresis⁽¹⁾

∆T_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

24

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

LM4040x10I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040C10I

LM4040D10I

PARAMETER

TEST CONDITIONS

I_Z= 150 µA

T_A

UNIT

V

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

10

–50

50

115

120

125

–100

–198

100

198

130

135

Reverse breakdown voltage

tolerance

∆V_Z

I_Z= 150 µA

mV

Full range

25°C

–115

75

I_Z,min

Minimum cathode current

µA

Full range

25°C

I_Z= 10 mA

±40

±20

±40

±20

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 150 µA

I_Z,min< I_Z< 1 mA

±20

25°C

0.8

1.5

3.5

14

0.8

2

4

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

mV

8

18

29

1 mA < I_Z< 15 mA

Full range

24

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.7

1.7

0.7

2.3

Ω

I_Z= 150 µA,

10 Hz ≤ f ≤ 10 kHz

180

µV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 150 µA

Long-term stability of reverse

breakdown voltage

120

ppm

%

V_HYSTThermal hysteresis⁽¹⁾

∆T_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

25

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

TYPICAL CHARACTERISTICS

1000

100

10

0.6

0.5

0.4

0.3

V

= 2.5 V

= 150 µA

Z

I

Z

50 ppm/°C

20 ppm/°C

7 ppm/°C

No Capacitor

0.2

0.1

1 µF

Tantanlum

Capacitor

0

−0.1

−0.2

−0.3

−0.4

V

= 2.5 V

= 150 µA

Z

1

I

Z

T = 25°C

J

I

= 0.1 I

Z,AC

Z

X

C

0.1

−40 −20

0

20

40

60

80 100 120

100

1k

10k

100k

1M

Temperature (_C)

Frequency (Hz)

Figure 1. Temperature Drift for Different Average

Temperature Coefficients

Figure 2. Output Impedance vs Frequency

1000

100

10

120

100

80

60

40

20

0

V

= 2.5 V

Z

No Capacitor

T = 25°C

J

V

= 2.5 V

= 1 mA

Z

1-µF

Tantanlum

Capacitor

I

Z

T = 25°C

J

I

= 0.1 I

Z

Z,AC

1

X

C

0.1

0.0

0

1.0

1

1.5

2.0

2

3.0

3

0.5

2.5

100

1k

10k

100k

1M

Frequency (Hz)

V , Reverse Voltage (V)

Z

Figure 3. Output Impedance vs Frequency

Figure 4. Temperature Drift for Different Average

Temperature Coefficient

10

6

4

6

5

V

= 2.5 V

= 200 µA

Z

I

Z

V

= 2.5 V

Z

T = 25°C

J

2

V

IN

T = 25°C

J

4

R

= 30 kΩ

0

S

3

−2

−4

1

2

V

Z

−6

1

−8

0

−10

−1

−10

−12

0.1

0

10 20 30 40 50 60 70 80 90

1

10

100

1k

10k

100k

Frequency (Hz)

Response Time (µs)

Figure 5. Noise Voltage vs Frequency

Figure 6. Start-Up Characteristics

26

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

APPLICATION INFORMATION

Start-Up Characteristics

R

S

V

IN

LM4040

V

Z

1-Hz Rate

Figure 7. Test Circuit

Output Capacitor

The LM4040 does not require an output capacitor across cathode and anode for stability. However, if an output

bypass capacitor is desired, the LM4040 is designed to be stable with all capacitive loads.

SOT-23 Connections

There is a parasitic Schottky diode connected between pins 2 and 3 of the SOT-23 packaged device. Thus, pin

3 of the SOT-23 package must be left floating or connected to pin 2.

Use With ADCs or DACs

The LM4040x-41 is designed to be a cost-effective voltage reference as required in 12-bit data-acquisition

systems. For 12-bit systems operating from 5-V supplies such as the ADS7842 (see Figure 8), the LM4040x-41

(4.096 V) permits operation with an LSB of 1 mV.

ADS7842

0 V to V

REF

V

1 AIN0

2 AIN1

3 AIN2

4 AIN3

28

27

5-V Analog Supply

ANA

+

5 V

0.1 µF

10 µF

V

DIG

A1 26

A0 25

909

3.2-MHz Clock

BUSY Output

Write Input

V

5

6

7

8

CLK 24

REF

+

2.2 µF

AGND

DB11

DB10

23

22

21

BUSY

WR

LM4040A-41

CS

9

DB9

RD 20

DB0 19

DB1 18

Read Input

10 DB8

11 DB7

12 DB6

13 DB5

14 DGND

DB2 17

DB3 16

DB4 15

Figure 8. Data-Acquisition Circuit With LM4040x-41

27

Submit Documentation Feedback

LM4040

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

www.ti.com

SLOS456J–JANUARY 2005–REVISED SEPTEMBER 2006

APPLICATION INFORMATION (continued)

Cathode and Load Currents

In a typical shunt-regulator configuration (see Figure 9), an external resistor, R_S, is connected between the

supply and the cathode of the LM4040. R_Smust be set properly, as it sets the total current available to supply

the load (I_L) and bias the LM4040 (I_Z). In all cases, I_Zmust stay within a specified range for proper operation of

the reference. Taking into consideration one extreme in the variation of the load and supply voltage (maximum I_L

and minimum V_S), R_Smust be small enough to supply the minimum I_Zrequired for operation of the regulator, as

given by data-sheet parameters. At the other extreme, maximum V_Sand minimum I_L, R_Smust be large enough

to limit I_Zto less than its maximum-rated value of 15 mA.

R_Sis calculated according to Equation 1:

ǒ

Ǔ

V_S* V_Z

R_S+

(

)

I_L) I_Z

(1)

V

S

R

S

I + I

Z L

I

L

V

Z

I

Z

LM4040

Figure 9. Shunt Regulator

28

Submit Documentation Feedback

PACKAGE OPTION ADDENDUM

www.ti.com

19-Jun-2007

PACKAGING INFORMATION

Orderable Device

LM4040A10IDBZR

LM4040A10IDBZRG4

LM4040A10IDBZT

LM4040A10IDBZTG4

LM4040A10IDCKR

LM4040A10IDCKRG4

Status ⁽¹⁾

ACTIVE

Package Package

Pins Package Eco Plan ⁽²⁾Lead/Ball Finish MSL Peak Temp ⁽³⁾

Qty

Type

Drawing

SOT-23

DBZ

3

5

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SOT-23

SC70

DBZ

DCK

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040A10ILP

LM4040A10ILPR

LM4040A20IDBZR

PREVIEW

ACTIVE

TO-92

LP

3

1000

2000

TBD

Call TI

SOT-23

DBZ

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040A20IDBZRG4

LM4040A20IDBZT

ACTIVE

SOT-23

SC70

DBZ

DCK

DBZ

DCK

3

5

3

5

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040A20IDBZTG4

LM4040A20IDCKR

LM4040A20IDCKRE4

LM4040A20IDCKRG4

LM4040A25IDBZR

LM4040A25IDBZRG4

LM4040A25IDBZT

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SOT-23

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040A25IDBZTG4

LM4040A25IDCKR

LM4040A25IDCKRE4

LM4040A25IDCKRG4

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040A25ILP

LM4040A25ILPR

LM4040A30IDBZR

PREVIEW

ACTIVE

TO-92

LP

3

1000

2000

TBD

Call TI

SOT-23

DBZ

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040A30IDBZRG4

LM4040A30IDBZT

ACTIVE

SOT-23

DBZ

3

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

Addendum-Page 1

PACKAGE OPTION ADDENDUM

www.ti.com

19-Jun-2007

Orderable Device

Status ⁽¹⁾

Package Package

Pins Package Eco Plan ⁽²⁾Lead/Ball Finish MSL Peak Temp ⁽³⁾

Qty

Type

Drawing

no Sb/Br)

LM4040A30IDBZTG4

LM4040A30IDCKR

ACTIVE

SOT-23

SC70

DBZ

DCK

3

5

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040A30IDCKRE4

LM4040A30IDCKRG4

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040A30IDCKT

LM4040A30ILP

PREVIEW

ACTIVE

SC70

TO-92

SOT-23

DCK

LP

5

3

250

TBD

Call TI

1000

2000

LM4040A30ILPM

LM4040A30ILPR

LM4040A41IDBZR

LP

DBZ

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040A41IDBZRG4

LM4040A41IDBZT

ACTIVE

SOT-23

SC70

DBZ

DCK

3

5

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040A41IDBZTG4

LM4040A41IDCKR

LM4040A41IDCKRE4

LM4040A41IDCKRG4

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040A41ILP

LM4040A41ILPR

LM4040A50IDBZR

PREVIEW

ACTIVE

TO-92

LP

3

1000

2000

TBD

Call TI

SOT-23

DBZ

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040A50IDBZRG4

LM4040A50IDBZT

ACTIVE

SOT-23

SC70

DBZ

DCK

3

5

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040A50IDBZTG4

LM4040A50IDCKR

LM4040A50IDCKRE4

LM4040A50IDCKRG4

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040A50ILP

PREVIEW

ACTIVE

TO-92

LP

3

1000

TBD

Call TI

LM4040A82IDBZR

SOT-23

DBZ

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040A82IDBZRG4

LM4040A82IDBZT

ACTIVE

SOT-23

DBZ

3

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

Addendum-Page 2

PACKAGE OPTION ADDENDUM

www.ti.com

19-Jun-2007

Orderable Device

LM4040A82IDBZTG4

LM4040A82IDCKR

LM4040A82IDCKRG4

LM4040B10IDBZR

LM4040B10IDBZRG4

LM4040B10IDBZT

Status ⁽¹⁾

ACTIVE

Package Package

Pins Package Eco Plan ⁽²⁾Lead/Ball Finish MSL Peak Temp ⁽³⁾

Qty

Type

Drawing

SOT-23

DBZ

3

5

3

5

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

DCK

DBZ

DCK

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SOT-23

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040B10IDBZTG4

LM4040B10IDCKR

LM4040B10IDCKRG4

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040B10ILP

LM4040B10ILPR

LM4040B20IDBZR

PREVIEW

ACTIVE

TO-92

LP

3

1000

2000

TBD

Call TI

SOT-23

DBZ

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040B20IDBZRG4

LM4040B20IDBZT

ACTIVE

SOT-23

SC70

DBZ

DCK

DBZ

DCK

3

5

3

5

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040B20IDBZTG4

LM4040B20IDCKR

LM4040B20IDCKRE4

LM4040B20IDCKRG4

LM4040B25IDBZR

LM4040B25IDBZRG4

LM4040B25IDBZT

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SOT-23

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040B25IDBZTG4

LM4040B25IDCKR

LM4040B25IDCKRE4

LM4040B25IDCKRG4

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040B25ILP

LM4040B25ILPR

LM4040B30IDBZR

PREVIEW

ACTIVE

TO-92

LP

3

1000

2000

TBD

Call TI

SOT-23

DBZ

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

Addendum-Page 3

PACKAGE OPTION ADDENDUM

www.ti.com

19-Jun-2007

Orderable Device

Status ⁽¹⁾

Package Package

Pins Package Eco Plan ⁽²⁾Lead/Ball Finish MSL Peak Temp ⁽³⁾

Qty

Type

Drawing

no Sb/Br)

LM4040B30IDBZRG4

LM4040B30IDBZT

ACTIVE

SOT-23

SC70

DBZ

DCK

3

5

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040B30IDBZTG4

LM4040B30IDCKR

LM4040B30IDCKRE4

LM4040B30IDCKRG4

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040B30IDCKT

LM4040B30ILP

PREVIEW

ACTIVE

SC70

TO-92

SOT-23

DCK

LP

5

3

250

TBD

Call TI

1000

2000

LM4040B30ILPM

LM4040B30ILPR

LM4040B41IDBZR

LP

DBZ

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040B41IDBZRG4

LM4040B41IDBZT

ACTIVE

SOT-23

SC70

DBZ

DCK

3

5

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040B41IDBZTG4

LM4040B41IDCKR

LM4040B41IDCKRE4

LM4040B41IDCKRG4

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040B41ILP

LM4040B41ILPR

LM4040B50IDBZR

PREVIEW

ACTIVE

TO-92

LP

3

1000

2000

TBD

Call TI

SOT-23

DBZ

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040B50IDBZRG4

LM4040B50IDBZT

ACTIVE

SOT-23

SC70

DBZ

DCK

3

5

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040B50IDBZTG4

LM4040B50IDCKR

LM4040B50IDCKRE4

LM4040B50IDCKRG4

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040B50ILP

LM4040B50ILPR

LM4040B82IDBZR

PREVIEW

ACTIVE

TO-92

LP

3

1000

2000

TBD

Call TI

SOT-23

DBZ

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

Addendum-Page 4

PACKAGE OPTION ADDENDUM

www.ti.com

19-Jun-2007

Orderable Device

Status ⁽¹⁾

Package Package

Pins Package Eco Plan ⁽²⁾Lead/Ball Finish MSL Peak Temp ⁽³⁾

Qty

Type

Drawing

no Sb/Br)

LM4040B82IDBZRG4

LM4040B82IDBZT

LM4040B82IDBZTG4

LM4040B82IDCKR

LM4040B82IDCKRG4

LM4040C10IDBZR

LM4040C10IDBZRG4

LM4040C10IDBZT

LM4040C10IDBZTG4

LM4040C10IDCKR

LM4040C10IDCKRG4

LM4040C10ILP

ACTIVE

SOT-23

SC70

DBZ

DCK

DBZ

DCK

LP

3

5

3

5

3

5

3

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SOT-23

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

TO-92

SOT-23

SC70

1000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040C10ILPR

LP

2000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040C20IDBZR

LM4040C20IDBZRG4

LM4040C20IDBZT

LM4040C20IDBZTG4

LM4040C20IDCKR

LM4040C20IDCKRE4

LM4040C20IDCKRG4

LM4040C20ILP

DBZ

DCK

LP

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

TO-92

SOT-23

1000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040C20ILPR

LP

2000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040C20QDBZR

LM4040C20QDBZRG4

LM4040C20QDBZT

DBZ

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

Addendum-Page 5

PACKAGE OPTION ADDENDUM

www.ti.com

19-Jun-2007

Orderable Device

LM4040C20QDBZTG4

LM4040C25IDBZR

LM4040C25IDBZRG4

LM4040C25IDBZT

LM4040C25IDBZTG4

LM4040C25IDCKR

LM4040C25IDCKRE4

LM4040C25IDCKRG4

LM4040C25IDCKT

LM4040C25IDCKTE4

LM4040C25IDCKTG4

LM4040C25ILP

Status ⁽¹⁾

ACTIVE

Package Package

Pins Package Eco Plan ⁽²⁾Lead/Ball Finish MSL Peak Temp ⁽³⁾

Qty

Type

Drawing

SOT-23

DBZ

3

5

3

5

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SOT-23

SC70

DBZ

DCK

LP

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

TO-92

SOT-23

SC70

1000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040C25ILPR

LP

2000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040C25QDBZR

LM4040C25QDBZRG4

LM4040C25QDBZT

LM4040C25QDBZTG4

LM4040C30IDBZR

LM4040C30IDBZRG4

LM4040C30IDBZT

LM4040C30IDBZTG4

LM4040C30IDCKR

LM4040C30IDCKRE4

LM4040C30IDCKRG4

DBZ

DCK

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040C30IDCKT

LM4040C30ILP

PREVIEW

ACTIVE

SC70

DCK

LP

5

3

250

TBD

Call TI

CU SN

Call TI

TO-92

1000

Pb-Free

(RoHS)

N / A for Pkg Type

Addendum-Page 6

PACKAGE OPTION ADDENDUM

www.ti.com

19-Jun-2007

Orderable Device

Status ⁽¹⁾

Package Package

Pins Package Eco Plan ⁽²⁾Lead/Ball Finish MSL Peak Temp ⁽³⁾

Qty

Type

TO-92

Drawing

LM4040C30ILPM

LM4040C30ILPR

PREVIEW

ACTIVE

LP

3

2000

TBD

Call TI

CU SN

Call TI

LP

Pb-Free

(RoHS)

N / A for Pkg Type

LM4040C30QDBZR

LM4040C30QDBZRG4

LM4040C30QDBZT

LM4040C30QDBZTG4

LM4040C41IDBZR

LM4040C41IDBZRG4

LM4040C41IDBZT

LM4040C41IDBZTG4

LM4040C41IDCKR

LM4040C41IDCKRE4

LM4040C41IDCKRG4

LM4040C41ILP

ACTIVE

SOT-23

SC70

DBZ

DCK

LP

3

5

3

5

3

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

TO-92

1000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040C41ILPR

TO-92

LP

2000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040C50IDBZR

LM4040C50IDBZRG4

LM4040C50IDBZT

LM4040C50IDBZTG4

LM4040C50IDCKR

LM4040C50IDCKRE4

LM4040C50IDCKRG4

LM4040C50ILP

SOT-23

SC70

DBZ

DCK

LP

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

TO-92

1000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040C50ILPR

TO-92

LP

2000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040C50QDBZR

LM4040C50QDBZRG4

SOT-23

DBZ

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

Addendum-Page 7

PACKAGE OPTION ADDENDUM

www.ti.com

19-Jun-2007

Orderable Device

LM4040C50QDBZT

LM4040C50QDBZTG4

LM4040C82IDBZR

LM4040C82IDBZRG4

LM4040C82IDBZT

LM4040C82IDBZTG4

LM4040C82IDCKR

LM4040C82IDCKRG4

LM4040C82ILP

Status ⁽¹⁾

ACTIVE

Package Package

Pins Package Eco Plan ⁽²⁾Lead/Ball Finish MSL Peak Temp ⁽³⁾

Qty

Type

Drawing

SOT-23

DBZ

3

5

3

5

3

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SOT-23

SC70

DBZ

DCK

LP

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

TO-92

1000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040C82ILPR

TO-92

LP

2000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040D20IDBZR

LM4040D20IDBZRG4

LM4040D20IDBZT

LM4040D20IDBZTG4

LM4040D20IDCKR

LM4040D20IDCKRE4

LM4040D20IDCKRG4

LM4040D20ILP

SOT-23

SC70

DBZ

DCK

LP

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

TO-92

1000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040D20ILPR

TO-92

LP

2000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040D20QDBZR

LM4040D20QDBZRG4

LM4040D20QDBZT

LM4040D20QDBZTG4

LM4040D25IDBZR

LM4040D25IDBZRG4

LM4040D25IDBZT

SOT-23

DBZ

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

Addendum-Page 8

PACKAGE OPTION ADDENDUM

www.ti.com

19-Jun-2007

Orderable Device

LM4040D25IDBZTG4

LM4040D25IDCKR

LM4040D25IDCKRE4

LM4040D25IDCKRG4

LM4040D25IDCKT

LM4040D25IDCKTE4

LM4040D25IDCKTG4

LM4040D25ILP

Status ⁽¹⁾

ACTIVE

Package Package

Pins Package Eco Plan ⁽²⁾Lead/Ball Finish MSL Peak Temp ⁽³⁾

Qty

Type

Drawing

SOT-23

DBZ

3

5

3

5

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

DCK

LP

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

TO-92

SOT-23

SC70

1000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040D25ILPR

LP

2000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040D25QDBZR

LM4040D25QDBZRG4

LM4040D25QDBZT

LM4040D25QDBZTG4

LM4040D30IDBZR

LM4040D30IDBZRG4

LM4040D30IDBZT

LM4040D30IDBZTG4

LM4040D30IDCKR

LM4040D30IDCKRE4

LM4040D30IDCKRG4

DBZ

DCK

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

LM4040D30IDCKT

LM4040D30ILP

PREVIEW

ACTIVE

SC70

DCK

LP

5

3

250

TBD

Call TI

CU SN

Call TI

TO-92

1000

Pb-Free

(RoHS)

N / A for Pkg Type

LM4040D30ILPM

LM4040D30ILPR

PREVIEW

ACTIVE

TO-92

LP

3

2000

TBD

Call TI

CU SN

Call TI

Pb-Free

(RoHS)

N / A for Pkg Type

LM4040D30QDBZR

LM4040D30QDBZRG4

LM4040D30QDBZT

ACTIVE

SOT-23

DBZ

3

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

Addendum-Page 9

PACKAGE OPTION ADDENDUM

www.ti.com

19-Jun-2007

Orderable Device

Status ⁽¹⁾

Package Package

Pins Package Eco Plan ⁽²⁾Lead/Ball Finish MSL Peak Temp ⁽³⁾

Qty

Type

Drawing

no Sb/Br)

LM4040D30QDBZTG4

LM4040D41IDBZR

LM4040D41IDBZRG4

LM4040D41IDBZT

LM4040D41IDBZTG4

LM4040D41IDCKR

LM4040D41IDCKRE4

LM4040D41IDCKRG4

LM4040D41ILP

ACTIVE

SOT-23

SC70

DBZ

DCK

LP

3

5

3

5

3

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

TO-92

1000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040D41ILPR

TO-92

LP

2000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040D50IDBZR

LM4040D50IDBZRG4

LM4040D50IDBZT

LM4040D50IDBZTG4

LM4040D50IDCKR

LM4040D50IDCKRE4

LM4040D50IDCKRG4

LM4040D50ILP

SOT-23

SC70

DBZ

DCK

LP

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

TO-92

1000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040D50ILPR

TO-92

LP

2000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040D50QDBZR

LM4040D50QDBZRG4

LM4040D50QDBZT

LM4040D50QDBZTG4

LM4040D82IDBZR

LM4040D82IDBZRG4

SOT-23

DBZ

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

Addendum-Page 10

PACKAGE OPTION ADDENDUM

www.ti.com

19-Jun-2007

Orderable Device

LM4040D82IDBZT

LM4040D82IDBZTG4

LM4040D82IDCKR

LM4040D82IDCKRG4

LM4040D82ILP

Status ⁽¹⁾

ACTIVE

Package Package

Pins Package Eco Plan ⁽²⁾Lead/Ball Finish MSL Peak Temp ⁽³⁾

Qty

Type

Drawing

SOT-23

DBZ

3

5

3

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SOT-23

SC70

DBZ

DCK

LP

250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

SC70

3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM

no Sb/Br)

TO-92

1000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040D82ILPR

LP

2000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

⁽¹⁾The marketing status values are defined as follows:

ACTIVE: Product device recommended for new designs.

LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.

NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in

a new design.

PREVIEW: Device has been announced but is not in production. Samples may or may not be available.

OBSOLETE: TI has discontinued the production of the device.

(2)

Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check

http://www.ti.com/productcontent for the latest availability information and additional product content details.

TBD: The Pb-Free/Green conversion plan has not been defined.

Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements

for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered

at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.

Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and

package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS

compatible) as defined above.

Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame

retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)

(3)

MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder

temperature.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is

provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the

accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take

reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on

incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited

information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI

to Customer on an annual basis.

Addendum-Page 11

PACKAGE MATERIALS INFORMATION

www.ti.com

7-May-2007

TAPE AND REEL INFORMATION

Pack Materials-Page 1

PACKAGE MATERIALS INFORMATION

www.ti.com

7-May-2007

Device

Package Pins

Site

Reel

A0 (mm)

B0 (mm)

K0 (mm)

P1

W

Pin1

Diameter Width

(mm) (mm) Quadrant

(mm)

179

(mm)

8

LM4040A10IDBZR

LM4040A10IDBZT

LM4040A10IDCKR

LM4040A20IDBZR

LM4040A20IDBZT

LM4040A20IDCKR

LM4040A25IDBZR

LM4040A25IDBZT

LM4040A25IDCKR

LM4040A30IDBZR

LM4040A30IDBZT

LM4040A30IDCKR

LM4040A41IDBZR

LM4040A41IDBZT

LM4040A41IDCKR

LM4040A50IDBZR

LM4040A50IDBZT

LM4040A50IDCKR

LM4040A82IDBZR

LM4040A82IDBZT

LM4040A82IDCKR

LM4040B10IDBZR

LM4040B10IDBZT

LM4040B10IDCKR

LM4040B20IDBZR

LM4040B20IDBZT

LM4040B20IDCKR

LM4040B25IDBZR

LM4040B25IDBZT

LM4040B25IDCKR

LM4040B30IDBZR

LM4040B30IDBZT

LM4040B30IDCKR

LM4040B41IDBZR

LM4040B41IDBZT

LM4040B41IDCKR

LM4040B50IDBZR

LM4040B50IDBZT

LM4040B50IDCKR

LM4040B82IDBZR

LM4040B82IDBZT

LM4040B82IDCKR

LM4040C10IDBZR

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

NSE

3.15

2.2

2.95

2.5

1.22

1.2

4

8

Q3

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.95

1.22

Pack Materials-Page 2

PACKAGE MATERIALS INFORMATION

www.ti.com

7-May-2007

Device

Package Pins

Site

Reel

A0 (mm)

B0 (mm)

K0 (mm)

P1

W

Pin1

Diameter Width

(mm) (mm) Quadrant

(mm)

179

(mm)

8

LM4040C10IDBZT

LM4040C10IDCKR

LM4040C20IDBZR

LM4040C20IDBZT

LM4040C20IDCKR

LM4040C20QDBZR

LM4040C20QDBZT

LM4040C25IDBZR

LM4040C25IDBZT

LM4040C25IDCKR

LM4040C25IDCKT

LM4040C25QDBZR

LM4040C25QDBZT

LM4040C30IDBZR

LM4040C30IDBZT

LM4040C30IDCKR

LM4040C30QDBZR

LM4040C30QDBZT

LM4040C41IDBZR

LM4040C41IDBZT

LM4040C41IDCKR

LM4040C50IDBZR

LM4040C50IDBZT

LM4040C50IDCKR

LM4040C50QDBZR

LM4040C50QDBZT

LM4040C82IDBZR

LM4040C82IDBZT

LM4040C82IDCKR

LM4040D20IDBZR

LM4040D20IDBZT

LM4040D20IDCKR

LM4040D20QDBZR

LM4040D20QDBZT

LM4040D25IDBZR

LM4040D25IDBZT

LM4040D25IDCKR

LM4040D25IDCKT

LM4040D25QDBZR

LM4040D25QDBZT

LM4040D30IDBZR

LM4040D30IDBZT

LM4040D30IDCKR

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

NSE

3.15

2.2

2.95

2.5

1.22

1.2

4

8

Q3

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

2.2

2.5

1.2

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

2.2

2.5

1.2

3.15

2.2

2.95

2.5

1.22

1.2

Pack Materials-Page 3

PACKAGE MATERIALS INFORMATION

www.ti.com

7-May-2007

Device

Package Pins

Site

Reel

A0 (mm)

B0 (mm)

K0 (mm)

P1

W

Pin1

Diameter Width

(mm) (mm) Quadrant

(mm)

179

(mm)

LM4040D30QDBZR

LM4040D30QDBZT

LM4040D41IDBZR

LM4040D41IDBZT

LM4040D41IDCKR

LM4040D50IDBZR

LM4040D50IDBZT

LM4040D50IDCKR

LM4040D50QDBZR

LM4040D50QDBZT

LM4040D82IDBZR

LM4040D82IDBZT

LM4040D82IDCKR

DBZ

DCK

DBZ

DCK

DBZ

DCK

3

5

3

5

3

5

NSE

8

3.15

2.2

2.95

2.5

1.22

1.2

4

8

Q3

3.15

2.2

2.95

2.5

1.22

1.2

3.15

2.2

2.95

2.5

1.22

1.2

TAPE AND REEL BOX INFORMATION

Device

Package

Pins

Site

Length (mm) Width (mm) Height (mm)

LM4040A10IDBZR

LM4040A10IDBZT

LM4040A10IDCKR

LM4040A20IDBZR

LM4040A20IDBZT

LM4040A20IDCKR

LM4040A25IDBZR

LM4040A25IDBZT

DBZ

DCK

DBZ

DCK

DBZ

3

5

3

5

3

NSE

220.0

205.0

50.0

Pack Materials-Page 4

PACKAGE MATERIALS INFORMATION

www.ti.com

7-May-2007

Device

Package

Pins

Site

Length (mm) Width (mm) Height (mm)

LM4040A25IDCKR

LM4040A30IDBZR

LM4040A30IDBZT

LM4040A30IDCKR

LM4040A41IDBZR

LM4040A41IDBZT

LM4040A41IDCKR

LM4040A50IDBZR

LM4040A50IDBZT

LM4040A50IDCKR

LM4040A82IDBZR

LM4040A82IDBZT

LM4040A82IDCKR

LM4040B10IDBZR

LM4040B10IDBZT

LM4040B10IDCKR

LM4040B20IDBZR

LM4040B20IDBZT

LM4040B20IDCKR

LM4040B25IDBZR

LM4040B25IDBZT

LM4040B25IDCKR

LM4040B30IDBZR

LM4040B30IDBZT

LM4040B30IDCKR

LM4040B41IDBZR

LM4040B41IDBZT

LM4040B41IDCKR

LM4040B50IDBZR

LM4040B50IDBZT

LM4040B50IDCKR

LM4040B82IDBZR

LM4040B82IDBZT

LM4040B82IDCKR

LM4040C10IDBZR

LM4040C10IDBZT

LM4040C10IDCKR

LM4040C20IDBZR

LM4040C20IDBZT

LM4040C20IDCKR

LM4040C20QDBZR

LM4040C20QDBZT

LM4040C25IDBZR

LM4040C25IDBZT

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

NSE

220.0

205.0

50.0

Pack Materials-Page 5

PACKAGE MATERIALS INFORMATION

www.ti.com

7-May-2007

Device

Package

Pins

Site

Length (mm) Width (mm) Height (mm)

LM4040C25IDCKR

LM4040C25IDCKT

LM4040C25QDBZR

LM4040C25QDBZT

LM4040C30IDBZR

LM4040C30IDBZT

LM4040C30IDCKR

LM4040C30QDBZR

LM4040C30QDBZT

LM4040C41IDBZR

LM4040C41IDBZT

LM4040C41IDCKR

LM4040C50IDBZR

LM4040C50IDBZT

LM4040C50IDCKR

LM4040C50QDBZR

LM4040C50QDBZT

LM4040C82IDBZR

LM4040C82IDBZT

LM4040C82IDCKR

LM4040D20IDBZR

LM4040D20IDBZT

LM4040D20IDCKR

LM4040D20QDBZR

LM4040D20QDBZT

LM4040D25IDBZR

LM4040D25IDBZT

LM4040D25IDCKR

LM4040D25IDCKT

LM4040D25QDBZR

LM4040D25QDBZT

LM4040D30IDBZR

LM4040D30IDBZT

LM4040D30IDCKR

LM4040D30QDBZR

LM4040D30QDBZT

LM4040D41IDBZR

LM4040D41IDBZT

LM4040D41IDCKR

LM4040D50IDBZR

LM4040D50IDBZT

LM4040D50IDCKR

LM4040D50QDBZR

LM4040D50QDBZT

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

5

3

NSE

220.0

205.0

50.0

Pack Materials-Page 6

PACKAGE MATERIALS INFORMATION

www.ti.com

7-May-2007

Device

Package

Pins

Site

Length (mm) Width (mm) Height (mm)

LM4040D82IDBZR

LM4040D82IDBZT

LM4040D82IDCKR

DBZ

DCK

3

5

NSE

220.0

205.0

50.0

Pack Materials-Page 7

MECHANICAL DATA

MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001

LP (O-PBCY-W3)

PLASTIC CYLINDRICAL PACKAGE

0.205 (5,21)

0.175 (4,44)

0.165 (4,19)

0.125 (3,17)

DIA

0.210 (5,34)

0.170 (4,32)

Seating

Plane

0.157 (4,00) MAX

0.050 (1,27)

C

0.500 (12,70) MIN

0.022 (0,56)

0.016 (0,41)

0.014 (0,35)

0.104 (2,65)

FORMED LEAD OPTION

STRAIGHT LEAD OPTION

D

0.135 (3,43) MIN

0.105 (2,67)

0.095 (2,41)

0.055 (1,40)

0.045 (1,14)

1

2

3

0.105 (2,67)

0.080 (2,03)

0.105 (2,67)

0.080 (2,03)

4040001-2/C 10/01

NOTES: A. All linear dimensions are in inches (millimeters).

B. This drawing is subject to change without notice.

C. Lead dimensions are not controlled within this area

D. FAlls within JEDEC TO -226 Variation AA (TO-226 replaces TO-92)

E. Shipping Method:

Straight lead option available in bulk pack only.

Formed lead option available in tape & reel or ammo pack.

1

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

MECHANICAL DATA

MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001

LP (O-PBCY-W3)

PLASTIC CYLINDRICAL PACKAGE

0.539 (13,70)

0.460 (11,70)

1.260 (32,00)

0.905 (23,00)

0.650 (16,50)

0.610 (15,50)

0.020 (0,50) MIN

0.098 (2,50)

0.384 (9,75)

0.335 (8,50)

0.748 (19,00)

0.217 (5,50)

0.748 (19,00)

0.689 (17,50)

0.433 (11,00)

0.335 (8,50)

0.114 (2,90)

0.094 (2,40)

0.114 (2,90)

0.094 (2,40)

0.169 (4,30)

0.146 (3,70)

DIA

0.266 (6,75)

0.234 (5,95)

0.512 (13,00)

0.488 (12,40)

TAPE & REEL

4040001-3/C 10/01

NOTES: A. All linear dimensions are in inches (millimeters).

B. This drawing is subject to change without notice.

C. Tape and Reel information for the Format Lead Option package.

2

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,

improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.

Customers should obtain the latest relevant information before placing orders and should verify that such information is current and

complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s

standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this

warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily

performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and

applications using TI components. To minimize the risks associated with customer products and applications, customers should

provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask

work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services

are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such

products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under

the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is

accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an

unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties

may be subject to additional restrictions.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service

voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business

practice. TI is not responsible or liable for any such statements.

TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would

reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement

specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications

of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related

requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any

applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its

representatives against any damages arising out of the use of TI products in such safety-critical applications.

TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are

specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military

specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is

solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in

connection with such use.

TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products

are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any

non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.

Following are URLs where you can obtain information on other Texas Instruments products and application solutions:

Products

Amplifiers

Data Converters

DSP

Applications

Audio

amplifier.ti.com

dataconverter.ti.com

dsp.ti.com

www.ti.com/audio

Automotive

Broadband

Digital Control

Military

www.ti.com/automotive

www.ti.com/broadband

www.ti.com/digitalcontrol

www.ti.com/military

Interface

interface.ti.com

logic.ti.com

Logic

Power Mgmt

Microcontrollers

RFID

power.ti.com

Optical Networking

Security

www.ti.com/opticalnetwork

www.ti.com/security

www.ti.com/telephony

www.ti.com/video

microcontroller.ti.com

www.ti-rfid.com

www.ti.com/lpw

Telephony

Low Power

Wireless

Video & Imaging

Wireless

www.ti.com/wireless

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265


型号：	LM4040D25IDCKR
厂家：	VISHAY
描述：	PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE 精密微功耗并联型电压基准光电二极管
文件：	总51页 (文件大小：575K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

LM4040D25IDCKR [VISHAY]

相关型号：

LM4040D25IDCKRE4

LM4040D25IDCKRG4

LM4040D25IDCKT

LM4040D25IDCKTE4

LM4040D25IDCKTG4

LM4040D25ILP

LM4040D25ILP

LM4040D25ILPE3

LM4040D25ILPM

LM4040D25ILPR

LM4040D25ILPR

LM4040D25ILPRE3