M70L103KB25 [VISHAY]

Rectangular Multi-Turn Cermet Trimmer; 矩形多转金属陶瓷微调
M70L103KB25
型号: M70L103KB25
厂家: VISHAY    VISHAY
描述:

Rectangular Multi-Turn Cermet Trimmer
矩形多转金属陶瓷微调

文件: 总4页 (文件大小:92K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
70  
www.vishay.com  
Vishay Spectrol  
1 1/4" Rectangular Multi-Turn Cermet Trimmer  
FEATURES  
• 0.5 W at 70 °C  
• Unique “T” slider block design  
• Wire leads available  
• CRV of 3 % or 3  
• RT tolerance 10 % STD ( 5 % available)  
• Tests according to CECC 41000 or IEC 60393-1  
• Material categorization: For definitions of compliance  
please see www.vishay.com/doc?99912  
DIMENSIONS in inches (millimeters) 0.02ꢀ ( 0.5 mm)  
70Y  
70L  
0.010  
Mtg. holes  
Ø 0.093 (2.36)  
0.070  
(1.78)  
0.010  
1.250  
(31.75)  
0.010  
0.050  
(1.27)  
0.010  
Ø 0.11  
(2.79)  
0.010  
0.63 (1.60)  
maꢁimum meniscus  
0.025  
(0.63)  
0.010  
1.000  
(25.40)  
0.125  
(3.18)  
#28 AWG leads insulated 6"  
(152.40 min. length)  
0.098  
(2.49)  
0.010  
T 601  
0.196  
(4.98)  
0.015  
0.325  
(8.25)  
43.2  
(1.702)  
0.245  
(6.22)  
6.5  
(0.255)  
7.6  
(0.300)  
Ø 10.2  
(0.401)  
0.030  
0.500  
(12.70)  
10  
(0.39)  
0.003  
Ø 0.028 typ.  
(0.71)  
Shakeproof washer  
12-28 heꢁ nut  
0.010  
7
0.010  
0.050  
SPECTROL 6-2  
(0.26)  
0.700  
(1.27)  
0.010  
(17.28)  
0.300  
(7.62)  
Adjustment screw  
head slot  
Ø 5.49  
(12-28 NF)  
0.010  
0.030  
(0.76)  
0.015 0.025 (0.64) wide ꢁ  
0.030 (076) deep  
0.100  
(2.54)  
0.260  
(6.60)  
Revision: 02-Oct-13  
Document Number: 57076  
1
For technical questions, contact: sferpottrimmers@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
70  
www.vishay.com  
Vishay Spectrol  
ELECTRICAL SPECIFICATIONS  
Resistance range  
10 thru 2 M  
10 %  
Standard resistance tolerance  
End resistance  
2 % maꢁimum  
Actual effective electrical travel  
Contact resistance variation  
Dielectric withstanding voltage  
Insulation resistance  
20 turns nominal  
3 % or 3 , whichever is greater  
1000 VAC at sea level, 350 VAC at 80 000 feet (24 400 meters)  
1000 M  
0.5 W at 70 °C  
0.6  
0.5  
0.4  
0.3  
Power rating  
70Y  
0.2  
70L  
0.1  
0
0
20  
40  
60 70 80  
100  
120  
140  
AMBIENT TEMPERATURE IN °C  
c
a
(3)  
(1)  
Circuit diagram  
cw  
b
(2)  
Limiting element voltage  
350 V  
100 ppm/°C  
Temperature coefficient of resistance (typical)  
MECHANICAL SPECIFICATIONS  
Operating torque  
5 oz. in (3.60 Ncm) maꢁimum  
200 cycles with loaded circuit, maꢁimum change in resistance 2 % or  
500 cycles without discontinuity unloaded  
Rotational life  
Weight  
0.116 oz. (3.3 g) maꢁimum  
Pure Sn (code e3)  
Terminals  
ENVIRONMENTAL SPECIFICATIONS  
Operating temperature range  
Terminal strength  
-55 °C to +125 °C (100 °C for leadwire style)  
2 lbs (9 N) minimum push/pull  
Sealed  
All units sealed to permit cleaning in common solvents immersion  
M70Y: 55/125/21  
M70L: 55/100/21  
Climatic category  
PERFORMANCES  
TYPICAL VALUES AND DRIFTS  
TESTS  
CONDITIONS  
RT/RT (%)  
R1-2/R1-2 (%)  
-55 °C to +125 °C, 5 cycles  
(100 °C for leadwire style)  
Thermal shock  
1 %  
1 %  
Shock  
50 g at 11 ms, 3 successive shocks in 3 directions  
10 Hz to 55 Hz 0.75 mm or 10 g for 6 h  
1000 h at rater power 90'/30'  
1 %  
1 %  
1 %  
1 %  
1 %  
1 %  
1 %  
5 %  
5 %  
-
Vibration  
Load life  
High temperature eꢁposure  
Resistance to solder heat  
+125 °C (100 °C for leadwire style)  
350 °C for 3 s  
Revision: 02-Oct-13  
Document Number: 57076  
2
For technical questions, contact: sferpottrimmers@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
70  
www.vishay.com  
Vishay Spectrol  
MARKING  
• Model  
• Ohmic value  
• Tolerance  
• Circuit diagram  
• Manufacturing date  
PACKAGING  
In boꢁ of 50 pieces code B25 (BO50)  
ORDERING INFORMATION (Part Number)  
M
7
0
L
1
0
3
K
B
2
5
MODEL  
M70  
STYLE  
OHMIC VALUE  
TOLERANCE  
PACKAGING CODE  
SPECIAL NUMBER  
L = Leadwire  
From 10   
to 2 M  
103 = 10K  
K = 10 %  
On request:  
J = 5 %  
B25 = Boꢁ 50 pieces  
(If applicable)  
Given by Vishay for  
custom design  
Y = Printed circuit  
pins  
DESCRIPTION (for information only)  
70  
L
10K  
10 %  
BO50  
e3  
MODEL  
STYLE  
VALUE  
TOLERANCE  
SPECIAL  
PACKAGING  
LEAD (Pb)-FREE  
Revision: 02-Oct-13  
Document Number: 57076  
3
For technical questions, contact: sferpottrimmers@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
Legal Disclaimer Notice  
www.vishay.com  
Vishay  
Disclaimer  
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE  
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,  
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other  
disclosure relating to any product.  
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or  
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all  
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,  
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular  
purpose, non-infringement and merchantability.  
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical  
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements  
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular  
product with the properties described in the product specification is suitable for use in a particular application. Parameters  
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All  
operating parameters, including typical parameters, must be validated for each customer application by the customer’s  
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,  
including but not limited to the warranty expressed therein.  
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining  
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.  
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please  
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by  
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.  
Material Category Policy  
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the  
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council  
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment  
(EEE) - recast, unless otherwise specified as non-compliant.  
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that  
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.  
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free  
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference  
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21  
conform to JEDEC JS709A standards.  
Revision: 02-Oct-12  
Document Number: 91000  
1

相关型号:

M70L122KB25

RESISTOR, TRIMMER, CERMET, 20 TURN(S), 0.5 W, 1200 ohm, 1-1/4 INCH, RECTANGULAR, 3 PINS, ROHS COMPLIANT
VISHAY

M70L124KB25

RESISTOR, TRIMMER, CERMET, 20 TURN(S), 0.5 W, 120000 ohm, 1-1/4 INCH, RECTANGULAR, 3 PINS, ROHS COMPLIANT
VISHAY

M70L125KB25

RESISTOR, TRIMMER, CERMET, 20 TURN(S), 0.5 W, 1200000 ohm, 1-1/4 INCH, RECTANGULAR, 3 PINS, ROHS COMPLIANT
VISHAY

M70L150KB25

RESISTOR, TRIMMER, CERMET, 20 TURN(S), 0.5 W, 15 ohm, 1-1/4 INCH, RECTANGULAR, 3 PINS, ROHS COMPLIANT
VISHAY

M70L151KB25

RESISTOR, TRIMMER, CERMET, 20 TURN(S), 0.5 W, 150 ohm, 1-1/4 INCH, RECTANGULAR, 3 PINS, ROHS COMPLIANT
VISHAY

M70L152KB25

RESISTOR, TRIMMER, CERMET, 20 TURN(S), 0.5 W, 1500 ohm, 1-1/4 INCH, RECTANGULAR, 3 PINS, ROHS COMPLIANT
VISHAY

M70L153KB25

RESISTOR, TRIMMER, CERMET, 20 TURN(S), 0.5 W, 15000 ohm, 1-1/4 INCH, RECTANGULAR, 3 PINS, ROHS COMPLIANT
VISHAY

M70L154KB25

RESISTOR, TRIMMER, CERMET, 20 TURN(S), 0.5 W, 150000 ohm, 1-1/4 INCH, RECTANGULAR, 3 PINS, ROHS COMPLIANT
VISHAY

M70L155KB25

RESISTOR, TRIMMER, CERMET, 20 TURN(S), 0.5 W, 1500000 ohm, 1-1/4 INCH, RECTANGULAR, 3 PINS, ROHS COMPLIANT
VISHAY

M70L180KB25

RESISTOR, TRIMMER, CERMET, 20 TURN(S), 0.5 W, 18 ohm, 1-1/4 INCH, RECTANGULAR, 3 PINS, ROHS COMPLIANT
VISHAY

M70L182KB25

RESISTOR, TRIMMER, CERMET, 20 TURN(S), 0.5 W, 1800 ohm, 1-1/4 INCH, RECTANGULAR, 3 PINS, ROHS COMPLIANT
VISHAY

M70L184KB25

RESISTOR, TRIMMER, CERMET, 20 TURN(S), 0.5 W, 180000 ohm, 1-1/4 INCH, RECTANGULAR, 3 PINS, ROHS COMPLIANT
VISHAY