M8340101K2103FA [VISHAY]
RESISTOR, NETWORK, FILM, ISOLATED, 1.4W, THROUGH HOLE MOUNT, DIP;
| 型号： | M8340101K2103FA |
| 厂家： | 
VISHAY |
| 描述： | RESISTOR, NETWORK, FILM, ISOLATED, 1.4W, THROUGH HOLE MOUNT, DIP |
| 文件： | 总2页 (文件大小：57K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Models M8340101 and M8340102
Vishay Techno
QPL MIL-PRF-83401 Qualified Dual-In-Line, Resistor Networks
A and B Schematics
FEATURES
• 1.3 watt to 1.6 watt at + 70°C.
• Qualified to MIL-PRF-83401.
• Designed for automatic insertion.
• Withstands thermal stress from - 65°C to + 125°C.
• Conforms to IC package configurations.
• High temperature solder joints.
• Custom schematic MIL-equivalent available.
CIRCUIT APPLICATIONS
A Schematic
M8340101xxxxxxA
M8340102xxxxxxA
7 or 8 isolated resistors
This model provides the user with a choice of 7 or 8 nominally equal resistors
with each resistor isolated from all others. Commonly used in the following
applications:
• “Wired OR” Pull-up
• Power Driven Pull-up
• Power Gate Pull-up
• Line Termination
• Long-line Impedance Balancing
• LED Current Limiting
• ECL Output Pull-down
• TTL Input Pull-down
14 Pin
16 Pin
Pin #1
B Schematic
M8340101xxxxxxB
M8340102xxxxxxB
13 or 15 resistors with one pin common
This model provides the user with a choice of 13 or 15 nominally equal resistors,
each connected to a common pin. Commonly used in the following applications:
• MOS/ROM Pull-up/Pull-down
• Open Collector Pull-up
• “Wired OR” Pull-up
• TTL Input Pull-down
• Digital Pulse Squaring
• TTL Unused Gate Pull-up
• High Speed Parallel Pull-up
14 Pin
16 Pin
• Power Driven Pull-up
Pin #1
Dielectric Strength: 200 V RMS, 1 minute.
Insulation Resistance: 10,000 Megohms minimum.
ELECTRICAL SPECIFICATIONS
Resistance Range: 27.4 ohms to 1 Megohm.
Resistance Tolerance: ± 1%, ± 2%, ± 5% standard.
Tighter tolerances available.
Temperature Coefficient: (- 55°C to + 125°C)
“K” = ± 100PPM/°C, “M” = ± 300PPM/°C.
Package Power Rating:
MECHANICAL SPECIFICATIONS
Resistive Element: Thick film.
Encapsulation: Thermoset epoxy mold.
Terminals: Solderable leads.
Terminal Strength: 4.5 pounds applied to 5 terminals for
30 seconds.
Schematic
14 Pin
1.4 watts
1.3 watts
16 Pin
1.6 watts
1.5 watts
A
B
ENVIRONMENTAL SPECIFICATIONS
Temperature Limits: - 65°C to + 125°C.
Maximum Operating Voltage: 100 volts per resistor.
www.vishay.com
28
Document Number 68015
Revision 11-Jun-01
Models M8340101 and M8340102
Vishay Techno
DIMENSIONAL CONFIGURATIONS [Numbers in brackets indicate millimeters]
14, 16 Pin DIP
.845 ± .030
[21.46 ± .762]
.745 ± .030
[18.92 ± .762]
.300 ± .010
.170 ± .020
[7.62 ± .254]
[4.32 ± .508]
.135 ± .010
.260 ± .005
[3.43 ± .254]
[6.60 ± .127]
.045 ± .020
Pin #1
Identifier
[1.14 ± .508]
.020 ± .002
[.508 ± .051]
.060 ± .005
[1.52 ± .127]
.010 ± .002
0° to 15°
[.254 ± .051]
.065 ± .020
[1.65 ± .508]
.100 ± .005
[2.54 ± .127]
Non-Cumulative
ENVIRONMENTAL PERFORMANCE
MIL-PRF-83401
REQUIREMENT
TEST1
CONDITIONS
TYPICAL ∆R
Power Conditioning
Thermal Shock
(108) 100 hours at 1.5 times rated power at + 25°C
(107) 5 cycles, - 65°C to +125°C
Group A Combined ∆R < 0.10%
∆R ≤ 0.70%
Thermal Shock Group C
Short Time Overload
(107) 25 cycles, - 65°C to +125°C
∆R ≤ 0.50%
∆R < 0.10%
∆R < 0.02%
2.5 times rated voltage not to exceed 2 times rated power ∆R ≤ 0.25%
for 5 seconds
Low Temperature Storage
Low Temperature Operation
High Temperature Exposure
Moisture Resistance
24 hours, no load at - 65°C
∆R ≤ 0.25%
∆R ≤ 0.25%
∆R ≤ 0.25%
∆R < 0.02%
∆R < 0.02%
∆R < 0.06%
∆R < 0.20%
∆R < 0.05%
∆R < 0.04%
∆R < 0.04%
∆R < 0.20%
1 hour storage, 45 minutes rated power at - 65°C
100 hours, no load at +125°C
(106) 240 hours with humidity ranging from 80% RH to 98% RH ∆R ≤ 0.50%
Resistance to Soldering Heat (210) + 260°C for 10 seconds
∆R ≤ 0.25%
∆R ≤ 0.25%
∆R ≤ 0.25%
Shock
(213) 18 shocks, 100g, 6 ms, sawtooth, 3 axes
(204) 10 to 2000 Hz, 20g, 12 hours, 3 axes
Vibration
Load Life
(108) 1000 hours at rated power at + 70°C and at rated power ∆R ≤ 0.50%
at + 25°C
1Numbers in parenthesis refer to test method MIL-STD-202 as modified by the detail specification.
DERATING
POWER RATING
150
125
100
75
70
The power rating listed for each network is based on continuous
full-load operation at an ambient temperature of + 70°C. When
the network is operated at temperatures other than + 70°C, the
power rating should be scaled linearly as shown.
25
50
25
- 60 - 30
0
30
60
90
120 150
AMBIENT TEMP. DEG. CENTIGRADE
HOW TO ORDER - MILITARY PART NUMBER
M83401
02
K
1003
F
A
VALUE
SCHEMATIC
MILITARY
SPECIFICATION NO.
SIZE
CHARACTERISTIC
TOLERANCE
01 = 14 Pin DIP
02 = 16 Pin DIP
First three digits are significant figures.
Last digit specifies number of zeros to follow.
Use R as decimal point for value less than
100 ohms. Example: 30R0 = 30 ohms.
F = ± 1%
G = ± 2%
J = ± 5%
K = ± 100PPM/°C
M= ± 300PPM/°C
A = Isolated
B = Common Bus
EXAMPLE: M8340102M1003FB = A single-in-line resistor network with
10 pins, a standard profile, a TCR of ± 300PPM/°C, resistance value of
100 kilohms, tolerance of ± 1% and to Schematic B.
Document Number 68015
Revision 11-Jun-01
www.vishay.com
29
相关型号：
M8340101K2103FB
Array/Network Resistor, Bussed, Metal Glaze/thick Film, 1.3W, 100V, 1% +/-Tol, 100ppm/Cel, Through Hole Mount, DIP
VISHAY
M8340101K2202JB
Array/Network Resistor, Bussed, Metal Glaze/thick Film, 1.3W, 100V, 5% +/-Tol, 100ppm/Cel, Through Hole Mount, DIP
VISHAY
©2020 ICPDF网 联系我们和版权申明