M8340101KA018FJD04 [VISHAY]
RESISTOR, NETWORK, FILM, TERMINATOR, 1.2 W, THROUGH HOLE MOUNT, DIP;
| 型号： | M8340101KA018FJD04 |
| 厂家： | 
VISHAY |
| 描述： | RESISTOR, NETWORK, FILM, TERMINATOR, 1.2 W, THROUGH HOLE MOUNT, DIP 电阻器 |
| 文件： | 总5页 (文件大小：125K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MDM (Military M83401)
Vishay Dale
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified,
Type RZ010 and RZ020, Dual-In-Line, Molded DIP
FEATURES
• Isolated, bussed and dual terminator schematics available
• MIL-PRF-83401 qualified
• Epoxy molded construction
• All device leads are hot-solder dipped
• Available in tube pack
• TCR available in “K” ( 100 ppmꢀ/Cꢁ or “M” ( 300 ppmꢀ/Cꢁ
depending on style
• 100 % screen tested per group A, subgroup 1 of
MIL-PRF-83401
• All devices are capable of passing the MIL-STD-202,
method 210, condition D, “Resistance to Soldering Heat”
test
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING
TEMPERATURE
VISHAY DALE
MODEL/
MIL
RESISTANCE
RANGE
Ω
MIL
STYLE
TOLERANCE (2) COEFFICIENT (1) WEIGHT
ELEMENT PACKAGE
SPEC. SCHEMATIC
SHEET
ꢀ
(- 55 °C to + 125 °C)
ppm/°C
g
P70 °C
W
P70 °C
W
PIN NO.
01 (Bꢁ
0.10
0.20
0.05
0.10
0.20
0.05
1.30
1.40
1.20
1.50
1.60
1.40
10 to 1M
10 to 1M
Consult factory
10 to 1M
10 to 1M
Consult factory
MDM14
MDM16
RZ010
RZ020
01
02
03 (Aꢁ
05 (Jꢁ
01 (Bꢁ
03 (Aꢁ
05 (Jꢁ
1, 2, 5
1, 2, 5
100, 300
100, 300
1.3
1.5
Notes
(1ꢁ
(2ꢁ
K = 100 ppmꢀ/C; M = 300 ppmꢀ/C
2 % standard, 1 % and 5 % available
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M8340101M2201GBD04 (preferred part numbering format)
M
8
3
4
0
1
0
1
M
2
2
0
1
G
B
D
0
4
CHARACTERISTIC
VALUE
MIL STYLE
SPEC SHEET
RESISTANCE
TOLERANCE
SCHEMATIC
PACKAGING
M83401
01 = 14 pin
02 = 16 pin
K = 100 ppm
M = 300 ppm
3 digit significant
figure, followed
by a multiplier
10R0 = 10 Ω
F = 1 %
G = 2 %
J = 5 %
A = Isolated
B = Bussed
D04 = Tinꢀlead, tube
DSL = Tinꢀlead, tube,
single lot date code
3302 = 33 kΩ
1004 = 1 MΩ
Historical Part Number example: M8340101M2201GB (will continue to be accepted)
01
2201
G
B
D04
M83401
M
RESISTANCE
VALUE
PACKAGING
SCHEMATIC
MIL STYLE
SPEC SHEET
CHARACTERISTIC
TOLERANCE
New Global Part Numbering: M8340102KA001GJD04 (preferred part numbering format)
M
8
3
4
0
1
0
2
K
A
0
0
1
G
J
D
0
4
RESISTANCE
VALUE
MIL STYLE
SPEC SHEET CHARACTERISTIC
TOLERANCE
SCHEMATIC
PACKAGING
Per std. Mil. Spec
(see Impedence
codes tableꢁ
F = 1 %
G = 2 %
J = 5 %
M83401
01 = 14 pin
02 = 16 pin
K = 100 ppm
M = 300 ppm
J = Dual
terminator
D04 = Tinꢀlead, tube
DSL = Tinꢀlead, tube,
single lot date code
Historical Part Number example: M8340102KA001GJ (will continue to be accepted)
D04
M83401
02
K
G
A001
J
RESISTANCE
VALUE
SPEC SHEET
TOLERANCE
MIL STYLE
CHARACTERISTIC
SCHEMATIC
PACKAGING
www.vishay.com
1
For technical questions, contact: ff2aresistors@vishay.com
Document Number: 31516
Revision: 03-Mar-10
MDM (Military M83401)
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified,
Vishay Dale
Type RZ010 and RZ020, Dual-In-Line, Molded DIP
DIMENSIONS in inches (millimetersꢁ
0.310 0.010
(7.87 0.254)
TYP 0.030
(0.762)
A
0.010 (0.254)
0.250 0.005
(6.35 0.127)
0.120 0.005
(3.05 0.127)
Pin #1
0.130 + 0.015
- 0.005
(3.30 + 0.381
- 0.127)
Identification
0.010 + 0.005
- 0.002
(0.254 + 0.127
- 0.051)
Pin #1
0.075 0.015
(1.91 0.381)
0.018 0.003
(0.457 0.076)
0.290 Min.
0.320 Nom.
0.360 Max.
(7.37 Min.
8.13 Nom.
9.14 Max.)
0.100 0.010
(2.54 0.254)
Non-Accumulative Tol.
“C” Spaces
B
0.010 (0.254)
0.050 0.005
(1.27 0.127)
VISHAY DALE MODEL
A
B
C
6
7
MDM14
MDM16
0.750 (19.05ꢁ
0.850 (21.59ꢁ
0.600 (15.24ꢁ
0.700 (17.78ꢁ
IMPEDANCE CODES
R1 (Ω)
R2 (Ω)
R1 (Ω)
330
330
1.5K
3K
R2 (Ω)
CODE
A001
A002
A003
A004
A005
A006
A007
A008
A009
CODE
82
130
200
210
260
240
390
270
330
390
A010
A011
A012
A013
A014
A015
A016
A017
A018
470
680
120
130
160
180
180
220
220
330
3.3K
6.2K
270
180
270
560
560
620
270
560
1.2K
2.7K
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
MDM SERIES
100
Maximum Operating Voltage
Voltage Coefficient of Resistance
Dielectric Strength
VDC
Veff
VAC
Ω
< 50 ppm
200 per min
10 000 M
Insulation Resistance
Operating Temperature Range
Storage Temperature Range
/C
- 55 to + 125
- 55 to + 150
/C
MECHANICAL SPECIFICATIONS
Marking Resistance to Solvents
Permanency testing per MIL-PRF-83401
Per MIL-PRF-83401
Solderability
Body
Molded epoxy
Terminals
Copper alloy, hot-solder dipped
Document Number: 31516
Revision: 03-Mar-10
For technical questions, contact: ff2aresistors@vishay.com
www.vishay.com
2
MDM (Military M83401)
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified,
Vishay Dale
Type RZ010 and RZ020, Dual-In-Line, Molded DIP
CIRCUIT APPLICATIONS
01 SCHEMATIC
MDM1401 (M8340101xxxxxxB)
MDM1601 (M8340102xxxxxxB)
13 or 15 resistors with one pin common
The MDMxx01 provides the user with a choice of 13 or 15 nominally
equal resistors, each connected to a common pin. Commonly used in
the following applications:
• •
• • • • •
•
• MOSꢀROM Pull-upꢀPull-down
• Open Collector Pull-up
• “Wired OR” Pull-up
• TTL Input Pull-down
MDM1401
MDM1601
• Digital Pulse Squaring
• TTL Unused Gate Pull-up
• High Speed Parallel Pull-up
Pin #1
• Power Driven Pull-up
03 SCHEMATIC
MDM1403 (M8340101xxxxxxA)
MDM1603 (M8340102xxxxxxA)
7 or 8 isolated resistors
The MDMxx03 provides the user with a choice of 7 or 8 nominally
equal resistors, with each resistor isolated from all others. Commonly
used in the following applications:
• “Wired OR” Pull-up
• Power Driven Pull-up
• Power Gate Pull-up
• Line Termination
• Long-line Impedance Balancing
• LED Current Limiting
• ECL Output Pull-down
• TTL Input Pull-down
MDM1403
MDM1603
Pin #1
05 SCHEMATIC
MDM1405 (M8340101xxxxxxJ)
MDM1605 (M8340102xxxxxxJ)
R1
R1
R1
R1
R1
R1
R1
R1
R2
R2
R2
R2
R2 R2
R1
R2
R1
R2
R1
12 or 14 resistor pairs
R1
R1
R1
The MDMxx05 provides the user with a choice of 12 or 14 pairs of
R1ꢀR2 resistor values for pulse squaring and TTL dual-line
terminating requirements.
R2
R2
R2
R2
R2
R2
MDM1405, MDM1605
Pin #1
CAGE CODE: 91637
01 Schematic
03 Schematic
05 Schematic
MDM 16
1.60
1.40
MDM 16
1.50
MDM 16
MDM 14
1.40
MDM 14
1.30
MDM 14
1.20
1.00
1.00
1.00
Single Resistor
0.20
Single Resistor
Single Resistor
0.10
0.05
- 55
+ 25
+ 70
+ 125 + 150
- 55
+ 25
+ 70
+ 125 + 150
- 55
+ 25
+ 70
+ 125 + 150
Derating
Ambient Temperature °C
Ambient Temperature °C
Ambient Temperature °C
www.vishay.com
3
For technical questions, contact: ff2aresistors@vishay.com
Document Number: 31516
Revision: 03-Mar-10
MDM (Military M83401)
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified,
Vishay Dale
Type RZ010 and RZ020, Dual-In-Line, Molded DIP
PERFORMANCE
TEST
CONDITIONS
MAX. ΔR (TYPICAL TEST LOTS)
0.50 % ΔR
1.5 x rated power, applied 1.5 h “ON” and 0.5 h “OFF”
for 100 h 4 h at + 25 /C ambient temperature
Power Conditioning
Thermal Shock
5 cycles between - 65 /C and + 125 /C
2.5 x rated working voltage for 5 s
0.50 % ΔR
0.25 % ΔR (Char. Kꢁ
0.50 % ΔR (Char. Mꢁ
Short Time Overload
Low Temperature Operation
Moisture Resistance
Resistance to Soldering Heat
Shock
0.25 % ΔR (Char. Kꢁ
0.50 % ΔR (Char. Mꢁ
45 min at full rated working voltage at - 65 /C
240 h with humidity ranging from 80 % RH to 98 % RH
Leads immersed in + 260 /C solder to within 1ꢀ16" of body for 10 s
Total of 18 shocks at 100 g's
0.50 % ΔR
0.25 % ΔR
0.25 % ΔR
0.25 % ΔR
Vibration
12 h at maximum of 20 g's between 10 Hz and 2000 Hz
1000 h at + 70 /C, rated power applied 1.5 h “ON”,
0.5 h “OFF” for full 1000 h period
0.50 % ΔR (Char. Kꢁ
2.00 % ΔR (Char. Mꢁ
Load Life
Terminal Strength
Insulation Resistance
4.5 pound pull for 30 s
0.25 % ΔR
10 000 MΩ (minimumꢁ
-
-
Dielectric Withstanding Voltage
No evidence of arcing or damage (200 VRMS for 1 minꢁ
Document Number: 31516
Revision: 03-Mar-10
For technical questions, contact: ff2aresistors@vishay.com
www.vishay.com
4
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
相关型号：
©2020 ICPDF网 联系我们和版权申明