M8340105K6980FG [VISHAY]
RESISTOR, NETWORK, FILM, ISOLATED, 0.6W, THROUGH HOLE MOUNT, SIP;型号: | M8340105K6980FG |
厂家: | VISHAY |
描述: | RESISTOR, NETWORK, FILM, ISOLATED, 0.6W, THROUGH HOLE MOUNT, SIP |
文件: | 总3页 (文件大小:42K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Models M83401/04, 05, 06, 07, 08, 09; C & G Schematics
Vishay Techno
QPL MIL-PRF-83401 Qualified, Single-In-Line
Resistor Networks
FEATURES
• 0.36 watt to 1.8 watt at + 70°C.
• Qualified to MIL-PRF-83401.
• Designed for automatic insertion.
• Withstands thermal stress from - 65°C to + 125°C.
• Conforms to IC package configurations.
• High temperature solder joints.
• Custom schematic MIL-equivalent available.
CIRCUIT APPLICATIONS
C Schematic
Standard Profile
Low Profile
6 pin (M8340104xxxxxxC)
8 pin (M8340105xxxxxxC)
10 pin (M8340106xxxxxxC)
6 pin (M8340107xxxxxxC)
8 pin (M8340108xxxxxxC)
10 pin (M8340109xxxxxxC)
5, 7 or 9 resistors with one pin common
This model provides the user with a choice of 5, 7 or 9 nominally equal resistors,
each connected to a common pin (Pin No.1). Commonly used in the following
applications:
6 Pin
8 Pin
10 Pin
Pin #1
• “Wired OR” Pull-up
• Open Collector Pull-up
• TTL Input Pull-down
• Power Gate Pull-up
• MOS/ROM Pull-up/Pull-down
• TTL Unused Gate Pull-up
G Schematic
Standard Profile
Low Profile
6 pin (M8340104xxxxxxG)
8 pin (M8340105xxxxxxG)
10 pin (M8340106xxxxxxG)
6 pin (M8340107xxxxxxG)
8 pin (M8340108xxxxxxG)
10 pin (M8340109xxxxxxG)
3, 4 or 5 isolated resistors
This model provides the user with a choice of 3, 4 or 5 nominally equal resistors.
Each resistor is isolated from all others. Commonly used in the following
applications:
6 Pin
8 Pin
10 Pin
Pin #1
• “Wired OR” Pull-up
• Power Driven Pull-up
• Power Gate Pull-up
• Line Termination
• Long-line Impedance Balancing
• LED Current Limiting
• ECL Output Pull-down
• TTL Input Pull-down
Dielectric Strength: 200 V RMS, 1 minute.
Insulation Resistance: 10,000 Megohm minimum.
ELECTRICAL SPECIFICATIONS
Resistance Range: 100 ohms to 1 Megohm standard profile,
27 ohms to 1 Megohm low profile.
MECHANICAL SPECIFICATIONS
Resistive Element: Thick film.
Encapsulation: Thermoset epoxy mold.
Terminals: Solderable leads.
Terminal Strength: 4.5 pounds applied to 5 terminals for
30 seconds.
Solderability: Meets MIL-STD-202, Method 208.
Resistance Tolerance: ± 1%, ± 2%, ± 5% standard. Tighter
tolerances available.
Temperature Coefficient: (- 55°C to + 125°C)
“K” = ± 100PPM/°C, “M” = ± 300PPM/°C.
Package Power Rating:
Schematic
Standard Profile
Low Profile
C
G
1.0 watt to 1.8 watt
0.6 watt to 1.08 watt
0.6 watt to 1.0 watt 0.36 watt to 0.60 watt
ENVIRONMENTAL SPECIFICATIONS
Temperature Limits: - 65°C to + 125°C.
Maximum Operating Voltage: 50 volts per resistor.
Document Number 68014
Revision 23-Sep-99
www.vishay.com
21
Models M83401/04, 05, 06, 07, 08, 09; C & G Schematics
Vishay Techno
DIMENSIONAL CONFIGURATIONS [Numbers in brackets indicate millimeters]
6, 8, 10 Pin Standard Profile
.990 ± .008
[25.15 ± .203]
.790 ± .008
[20.07 ± .203]
.083 ± .005
[2.11 ± .127]
.590 ± .008
[14.99 ± .203]
Pin #1
Identifier
.018 ± .003
.338 ± .005
[.457 ± .076]
[8.59 ± .127]
.135 ± .010
[3.43 ± .254]
.010 ± .002
.040 + .009
- .015
[1.02 + .229
- .381]
.020 ± .003
[.508 ± .076]
[.254 ± .051]
.100 ± .005
[2.54 ± .127]
Non-Cumulative
6, 8, 10 Pin Low Profile
.990 ± .008
[25.15 ± .203]
.790 ± .008
.083 ± .005
[20.07 ± .203]
[2.11 ± .127]
.590 ± .008
[14.99 ± .203]
.018 ± .003
[.457 ± .076]
Pin #1
Identifier
.187 ± .005
[4.75 ± .127]
.135 ± .010
[3.43 ± .254]
.020 ± .003
[.508 ± .076]
.040 + .009
- .015
[1.02 + .229
- .381]
.010 ± .002
[.254 ± .051]
.100 ± .005
[2.54 ± .127]
Non-Cumulative
ENVIRONMENTAL PERFORMANCE
MIL-PRF-83401
REQUIREMENT
TEST1
CONDITIONS
TYPICAL ∆R
Power Conditioning
Thermal Shock
(108) 100 hours at 1.5 times rated power at + 25°C
(107) 5 cycles, - 65°C to + 125°C
Group A Combined ∆R < 0.10%
∆R ≤ 0.70%
Thermal Shock Group C
Short Time Overload
(107) 25 cycles, - 65°C to + 125°C
∆R ≤ 0.50%
∆R ≤ 0.25%
∆R < 0.10%
∆R < 0.02%
2.5 times rated voltage not to exceed 2 times rated power
for 5 seconds
Low Temperature Storage
Low Temperature Operation
High Temperature Exposure
Moisture Resistance
24 hours, no load at - 65°C
∆R ≤ 0.25%
∆R ≤ 0.25%
∆R ≤ 0.25%
∆R ≤ 0.50%
∆R ≤ 0.25%
∆R ≤ 0.25%
∆R ≤ 0.25%
∆R ≤ 0.50%
∆R < 0.02%
∆R < 0.02%
∆R < 0.06%
∆R < 0.20%
∆R < 0.05%
∆R < 0.04%
∆R < 0.04%
∆R < 0.20%
1 hour storage, 45 minutes rated power at - 65°C
100 hours, no load at + 125°C
(106) 240 hours with humidity ranging from 80% RH to 98% RH
Resistance to Soldering Heat (210) + 260°C for 10 seconds
Shock
(213) 18 shocks, 100g, 6 ms, sawtooth, 3 axes
Vibration
Load Life
(204) 10 to 2000Hz, 20g, 12 hours, 3 axes
(108) 1000 hours at rated power at + 70°C and at rated power
at + 25°C
1Numbers in parenthesis refer to test method MIL-STD-202 as modified by the detail specification.
www.vishay.com
22
Document Number 68014
Revision 23-Sep-99
Models M83401/04, 05, 06, 07, 08, 09; C & G Schematics
Vishay Techno
DERATING
POWER RATING
130
110
90
70
25
The power rating listed for each network is based on
70
continuous full-load operation at an ambient temperature of
+ 70°C. When the network is operated at temperatures other
than + 70°C, the power rating should be scaled linearly as shown.
50
30
- 60 - 30
0
30
60
90 120 150
AMBIENT TEMP. DEG. CENTIGRADE
HOW TO ORDER - MILITARY PART NUMBER
M83401
06
1003
K
F
C
MILITARY SPECIFICATION
NUMBER
SIZE
VALUE
CHARACTERISTIC
TOLERANCE SCHEMATIC
F
= ± 1%
G = ± 2%
= ± 5%
C = Common
Bus
G = Isolated
First three digits are
04 = 6 Pin Standard Profile SIP
05 = 8 Pin Standard Profile SIP
06 = 10 Pin Standard Profile SIP
07 = 6 Pin Low Profile SIP
08 = 8 Pin Low Profile SIP
09 = 10 Pin Low Profile SIP
K = ± 100PPM/°C
M = ± 300PPM/°C
significant figures. Last
digit specifies number
of zeros to follow. Use
R as decimal point for
value less than 100 ohms.
Example: 30R0 = 30 Ohms.
J
EXAMPLE: M8340106M1003FC = A single-in-line resistor network with 10 pins, a standard profile, a TCR of ± 300PPM/°C, resistance
value of 100 kilohms, tolerance of ± 1% and to Schematic C.
Document Number 68014
Revision 23-Sep-99
www.vishay.com
23
相关型号:
M8340105M1004FC
Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ, Single-In-Line, Molded SIP; 01, 03, 05 Schematics
VISHAY
M8340105M1004FG
Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ, Single-In-Line, Molded SIP; 01, 03, 05 Schematics
VISHAY
M8340105M1004GC
Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ, Single-In-Line, Molded SIP; 01, 03, 05 Schematics
VISHAY
M8340105M1004GG
Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ, Single-In-Line, Molded SIP; 01, 03, 05 Schematics
VISHAY
M8340105M1004JC
Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ, Single-In-Line, Molded SIP; 01, 03, 05 Schematics
VISHAY
M8340105M1004JG
Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ, Single-In-Line, Molded SIP; 01, 03, 05 Schematics
VISHAY
M8340105M10R0FC
Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ, Single-In-Line, Molded SIP; 01, 03, 05 Schematics
VISHAY
M8340105M10R0FG
Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ, Single-In-Line, Molded SIP; 01, 03, 05 Schematics
VISHAY
M8340105M10R0GC
Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ, Single-In-Line, Molded SIP; 01, 03, 05 Schematics
VISHAY
M8340105M10R0GG
Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ, Single-In-Line, Molded SIP; 01, 03, 05 Schematics
VISHAY
©2020 ICPDF网 联系我们和版权申明