M8340107K1721BCUP [VISHAY]

Array/Network Resistor, Bussed, Thin Film, 1720ohm, 100V, 0.1% +/-Tol, -100,100ppm/Cel, 5810;


型号：	M8340107K1721BCUP
厂家：	VISHAY
描述：	Array/Network Resistor, Bussed, Thin Film, 1720ohm, 100V, 0.1% +/-Tol, -100,100ppm/Cel, 5810
文件：	总4页 (文件大小：82K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

M83401, C83401

Vishay Dale Thin Film

www.vishay.com

Thin Film Resistor Network Military, MIL-PRF-83401 Qualified,

Type RZ070, RZ080, RZ090, RZ210, RZ220, RZ230,

Single-In-Line SIP

FEATURES

• MIL-PRF-83401 qualified (cage code 57489)

• Low Profile 0.195" (4.95 mm seated height)

• Characteristics R ( 25 ppm), H, V, K, and M

• Hot fused tin/lead 60/40 solder dipped

• Rugged molded low profile construction with standoff

• 100 % screened to groups A MIL-PRF-83410 testing

• Tolerances to 0.1 %

Qualified to meet MIL-PRF-83401 characteristic “R”, “V”, and “H”

• Isolated and bussed (schematic C and G)

These resistor networks are available in 6 pins, 8 pins, and

10 pins in schematic C and G styles. Custom circuits are not

available. Schematic C and G only. They incorporate Vishay

Dale Thin Film’s patented passivated nichrome film to give

superior performance on temperature coefficient of

resistance, thermal stability, noise, voltage coefficient,

power handling and resistance stability. The leads are

attached to the metallized alumina substrates by

Thermo-Compression bonding. The body is molded

thermoset plastic with gold plated copper alloy leads. This

product will outperform all of the requirements of

characteristic “R”, “V”, and “H” of MIL-PRF-83401.

TYPICAL PERFORMANCE

ABSOLUTE

TRACKING

TCR

TOL.

ABSOLUTE

0.1

RATIO

0.1 to 0.05

SCHEMATIC

C Schematic (Pin 1 Common)

G Schematic (Isolated)

2 3

STANDARD ELECTRICAL SPECIFICATIONS

TEST

SPECIFICATIONS

CONDITIONS

Material

Passivated nichrome

6, 8, 10

100  to 200 k per resistor

25 ppm/ꢀC to 300 ppm/ꢀC

5 ppm/ꢀC

Pin/Lead Number

Resistance Range

TCR: Absolute

Tolerance dependent ⁽²⁾

- 55 ꢀC to + 125 ꢀC ⁽¹⁾

- 55 ꢀC to + 125 ꢀC

TCR: Tracking

Tolerance: Absolute

Tolerance: Ratio

Power Rating: Resistor

Power Rating: Package

Stability: Absolute

Stability: Ratio

Voltage Coefficient

Working Voltage

Operating Temperature Range

Storage Temperature Range

Noise

0.1 % to 5.0 %

0.1 % to R₁

+ 25 ꢀC

Maximum at + 70 ꢀC

2000 h at + 70 ꢀC

0.06 mW to 0.120 mW (per element typical at + 25 ꢀC) ⁽¹⁾

0.18 W to 1.08 W ⁽¹⁾

R 0.05 %

R 0.015 %

< 0.1 ppm/V

100 V

- 55 ꢀC to + 125 ꢀC

< - 30 dB

Thermal EMF

Shelf Life Stability: Absolute

Shelf Life Stability: Ratio

< 0.08 μV/ꢀC

R 0.01 %

R 0.002 %

1 year at + 25 ꢀC

Notes

(1)

(2)

Consult MIL-PRF-83401

“H” characteristic 100  to 100 k resistance range at 0.1% best

“R” characteristic 250  to 100 k resistance range at 0.1% best

“R” characteristic 250  to 200 k resistance range at 1% best

Revision: 01-Mar-13

Document Number: 60116

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

M83401, C83401

Vishay Dale Thin Film

www.vishay.com

DIMENSIONS AND IMPRINTING in inches and millimeters

DIMENSION

INCHES

MILLIMETERS

0.89

0.035

0.040

Part

Number

1.02

Indicates

Pin 1

0.100 0.005 non-accum.

0.019 0.006 typical

0.187 0.010

2.54 0.13

0.48 0.15

4.75 0.25

3.43

Date

Code

Vishay

Logo

0.135

0.095

2.41

0.012 0.004

0.31 0.10

14.81 - 0.584/+ 0.254

19.89 - 0.584/+ 0.254

24.97 - 0.584/+ 0.254

L (6 Pins)

L (8 Pins)

L (10 Pins)

0.583 - 0.023/+ 0.01

0.783 - 0.023/+ 0.01

0.983 - 0.023/+ 0.01

CONSTRUCTION

High Purity

Alumina Substrate

Gold Plated

Copper Leads

Sputtered

Film System

Gold to Gold

Thermo-Compression Bond

(No Internal Solder)

MECHANICAL SPECIFICATIONS

Resistive Element

Substrate Material

Body Molded

TAMELOX passivated nichrome

Alumina

Epoxy

Terminals

Copper alloy

Plating/Solder

Nickel/gold/Sn63 fussed

POWER DERATING

C Schematic (Pin 1 Common Characteristic H)

G Schematic (Isolated Characteristic H)

Low Profile

10 Pin Package

1.08

8 Pin Package

0.84

10 Pin Package

8 Pin Package

0.60

0.48

6 Pin Package

0.60

10 Pin Package

0.54

(Char. R and V)

6 Pin Package

0.36

0.30

10 Pin Package

(Char. R and V)

Single Resistor

0.12

Single Resistor

(Char. R and V)

0.12

0.06

Single Resistor

0.06

(Char. R and V)

- 55

+ 25

+ 70

+ 125 + 150

- 55

+ 25

+ 70

+ 125 + 150

Ambient Temperature °C

Revision: 01-Mar-13

Document Number: 60116

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

M83401, C83401

Vishay Dale Thin Film

www.vishay.com

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: M8340107H1000BCUF

MODEL

(5 digits)

SCHEMATIC CHARACTERISTIC

RESISTANCE

(4 digits)

TOLERANCE SCHEMATIC

PACKAGING

(2 digits)

VENDOR

(1 digits)

(2 digits)

(1 digits)

M83401

Single

in-line

resistor

network

low profile

07 = 6 pin

08 = 8 pin

09 = 10 pin

H = 50 ppm/ꢀC

V = 50 ppm/ꢀC

5 ppm/ꢀC track

R = 25 ppm/ꢀC

5 ppm/ꢀC track

K = 100 ppm/ꢀC

M = 300 ppm/ꢀC

First 3 digits

are significant

figures and the

last digit specifies

the number of

zeros to follow.

(100  to 100 k)

Examples:

B = 0.1 % ⁽³⁾

D = 0.5 % ⁽³⁾

F = 1 %

C =

Pin 1

common

G =

Isolated

resistors

UF =

Tubed

UI =

V ⁽²⁾

Vishay Dale

Thin Film

G = 2 %

100 min, 1 mult

(item single

lot date code)

UP =

100 min.,1 mult

(package unit

single lot date)

21 = 6 pin ⁽¹⁾

22 = 8 pin ⁽¹⁾

23 = 10 pin ⁽¹⁾

J = 5 %

C83401

Non burn in

screened

network

1000 = 100 

1001 = 1000 

Notes

(1)

(2)

(3)

No internal solder

“V" is not required for characteristics R, H, and V, it is only required for K and M. Characteristics tolerance equal to or greater than 1 %."

“H” characteristic 100  to 100 k resistance range at 0.1% best

“R” characteristic 250  to 100 k resistance range at 0.1% best

“R” characteristic 250  to 200 k resistance range at 1% best

RESISTANCE

MODEL

SCHEMATIC

CHARACTERISTIC

TOLERANCE

SCHEMATIC

RANGE

H = 50 ppm/ꢀC

100 to 100K

250 to 100K

250 to 200K

250 to 100K

250 to 200K

B, D, F, G, J

F, G, J

V = 50 ppm/ꢀC/

5 ppm/ꢀC track

07 = 6 pin (RZ070)

08 = 8 pin (RZ080)

09 = 10 pin (RZ090)

21 = 6 pin (RZ210)

22 = 8 pin (RZ220)

23 = 10 pin (RZ230)

M83401

C83401

B, D, F, G, J

F, G, J

C, G

R = 25 ppm/ꢀC

5 ppm/ꢀC track

K = 100 ppm/ꢀC

M = 300 ppm/ꢀC

100 to 100K

B, D, F, G, J

Revision: 01-Mar-13

Document Number: 60116

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.

Revision: 02-Oct-12

Document Number: 91000

M8340107K1721BCUP [VISHAY]

相关型号：

M8340107K2002BGUF

M8340107K2002DGUF

M8340107K2051FG

M8340107K2200JGUPV

M8340107K2201GC

M8340107K2401GC

M8340107K2492FG

M8340107K2742FG

M8340107K3302FC

M8340107K3302FG

M8340107K3302GC

M8340107K3302GG