MBA02040C1203FRP00 概述
RES 120K OHM 0.4W 1% AXIAL
MBA02040C1203FRP00 数据手册
通过下载MBA02040C1203FRP00数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
Professional Metal Film Leaded Resistors
FEATURES
• CECC version (IECQ-CECC approved
according to EN 140101-806)
• Excellent overall stability: class 0.25
• Wide ohmic range: 0.22 to 22 M
• AEC-Q200 qualified available (1)
• Radial version available for MBB/SMA 0207
• Alternative termination wires available e.g. weldable wire
(MBA/SMA 0204 only)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
(1)
AEC-Q200 qualified parts are available per tables “Temperature
click logo to get started
Coefficient and Resistance Range”
DESIGN SUPPORT TOOLS
Models
APPLICATIONS
• Industrial
Available
DESCRIPTION
• Telecommunication
• Medical equipment
• Automotive
MBA/SMA 0204, MBB/SMA 0207, and MBE/SMA 0414
professional leaded thin film resistors are the general
purpose resistor for all fields of professional electronics
where reliability and stability is of major concern. Typical
applications
include
industrial,
telecommunication,
automotive, and medical equipment.
TECHNICAL SPECIFICATIONS
DESCRIPTION
MBA/SMA 0204
MBB/SMA 0207
MBE/SMA 0414
DIN size
0204
A
0207
B
0414
D
CECC size
Resistance range
Resistance tolerance
Temperature coefficient
0.22 to 10 M; 0
0.22 to 22 M; 0
5 %; 1 %; 0.5 %
50 ppm/K; 25 ppm/K
0.6 W
0.22 to 22 M
(2)
Rated dissipation, P70
0.4 W
200 V
1.0 W
500 V
Operating voltage, Umax. AC/DC
Operating temperature range (2)
Peak permissible film temperature (2)
Insulation voltage:
350 V
-55 °C to 155 °C
155 °C
155 °C
155 °C
1 min.; Uins
Continuous
300 V
75 V
500 V
75 V
800 V
75 V
Failure rate: FITobserved
Notes
0.1 x 10-9/h
0.1 x 10-9/h
0.1 x 10-9/h
•
(2)
MB_ series has been merged with the related SMA series to form one series “MB_/SMA__”
Please refer to APPLICATION INFORMATION below
Revision: 11-Jul-2018
Document Number: 28766
1
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
APPLICATION INFORMATION
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow
support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is
not exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder
joint, hence special solder alloys or board materials may be required to maintain the reliability of the assembly.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime. The designer may estimate the performance of the particular resistor application or set certain load and
temperature limits in order to maintain a desired stability.
MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION
Operation mode
Standard
-55 °C / +125 °C / 56 days
0.25 W
Power
Climatic category
-55 °C / +155 °C / 56 days
MBA/SMA 0204
MBB/SMA 0207
MBE/SMA 0414
0.4 W
0.6 W
Rated dissipation, P70
0.4 W
0.65 W
1.0 W
Applied maximum film temperature, F max.
125 °C
155 °C
1 to 475 k
0.5 %
1.0 %
MBA/SMA 0204
1000 h
1 to 475 k
0.25 %
8000 h
0.5 %
225 000 h
MBB/SMA 0207
1000 h
1.5 %
1 to 1 M
0.25 %
1 to 1 M
0.5 %
1.0 %
Max. resistance change at rated
dissipation |R/R max.|, after:
8000 h
0.5 %
225 000 h
MBE/SMA 0414
1000 h
1.5 %
1 to 2.4 M
0.2 %
1 to 2.4 M
0.4 %
0.8 %
8000 h
0.4 %
225 000 h
1.2 %
Revision: 11-Jul-2018
Document Number: 28766
2
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE - Standard Products
TYPE
TCR
TOLERANCE
RESISTANCE (1)(2)
0.22 to 0.91
1 to 10 M
E-SERIES
E24
5 %
1 %
0.5 %
1 %
0.5 %
-
50 ppm/K
E24; E96
E24; E192
E24; E96
E24; E192
-
10 to 475 k
10 to 475 k
10 to 475 k
< 10 m; Imax. = 3 A
MBA/SMA 0204
25 ppm/K
Jumper
0.22 to 0.91
11 M to 22 M
5 %
E24
1 %
2 %
1 to 10 M
0.22 to 0.91
10 to 1 M
E24; E96
E24
50 ppm/K
MBB/SMA 0207
0.5 %
1 %
E24; E192
E24; E96
E24; E192
-
10 to 1 M
25 ppm/K
Jumper
0.5 %
-
10 to 1 M
< 10 m; Imax. = 5 A
0.22 to 0.91
1 to 22 M
5 %
E24
50 ppm/K
25 ppm/K
1 %
E24; E96
E24; E192
E24; E96
E24; E192
MBE/SMA 0414
0.5 %
1 %
10 to 2.43 M
10 to 2.43 M
10 to 2.43 M
0.5 %
Notes
•
Resistance ranges printed in bold are preferred TCR / tolerance combinations with optimized availability
Resistance value to be selected from E24 series for 5 %, 2 %, from E24/E96 series for 1 % tolerance and from E24/E192 for 0.5 %
tolerance
AEC-Q200 qualification applies to products with TCR = 50 ppm/K and tolerance = 1 % in the ranges of 10 to 301 k for MBA/SMA
0204, 10 to 7.5 M for MBB/SMA 0207, and 10 to 22 M for MBE/SMA 0414
(1)
(2)
Revision: 11-Jul-2018
Document Number: 28766
3
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
PART NUMBER AND PRODUCT DESCRIPTION - Standard Products
PART NUMBER: MBB02070C1001FCT00
M
B
B
0
2
0
7
0
C
1
0
0
1
F
C
T
0
0
TYPE/SIZE
VARIANT
TCR
RESISTANCE
TOLERANCE
PACKAGING
SPECIAL
MBA0204 =
MBA/SMA 0204
MBB0207 =
MBB/SMA 0207
MBE0414 =
MBE/SMA 0414
0 = neutral
N = RB radial
5 mm for
MBB/SMA0207
S = UB radial
2.5 mm for
MBB/SMA0207
I = L0 welding
joint not
D = 25 ppm/K
C = 50 ppm/K
Z = jumper
3 digit value
1 digit multiplier
MULTIPLIER
7 = *10-3
D = 0.5 %
F = 1 %
G = 2 %
J = 5 %
Z = jumper
CT
C1
RP
R2
R4
N4
00 = standard
Special
termination
wires for
MBA/SMA 0204:
FE = coppered
steel
8 = *10-2
9 = *10-1
0 = *100
1 = *101
2 = *102
CA = tinned CuAg
NS = tinned Ni
lacquered for
MBB/SMA 0207
B = KL
3 = *103
4 = *104
5 = *105
6 = *106
lacquered
0000 = jumper
welding joint for
MBA/SMA 0204
D = Ni wire for
MBA/SMA 0204
Product Description: MBB/SMA 0207-50 1 % CT 1K0
MBB/SMA 0207
-
50
1 %
CT
1K0
TYPE/SIZE
TCR
TOLERANCE
VARIANT
PACKAGING
RESISTANCE
MBA/SMA 0204
MBB/SMA 0207
MBE/SMA 0414
25 ppm/K
50 ppm/K
0.5 %
1.0 %
2.0 %
5.0 %
RB
UB
L0
KL
NISN
AG
CT
C1
RP
R2
R4
N4
1K0 = 1 k
51R1 = 51.1
Notes
•
•
•
The products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER
Standard products are not CECC approved
Radial version (RB,UB) cannot be qualified according to CECC so these can only be ordered as standard products
Revision: 11-Jul-2018
Document Number: 28766
4
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE - CECC Approved Products
TYPE
TCR
TOLERANCE
RESISTANCE (1)(2)
0.22 to 0.91
1 to 10 M
E-SERIES
E24
5 %
1 %
0.5 %
1 %
0.5 %
-
50 ppm/K
E24; E96
E24; E192
E24; E96
E24; E192
-
10 to 475 k
10 to 475 k
10 to 475 k
< 10 m; Imax. = 3 A
MBA/SMA 0204
25 ppm/K
Jumper
0.22 to 0.91
11 M to 22 M
5 %
E24
50 ppm/K
1 %
0.5 %
1 %
1 to 10 M
10 to 1 M
E24; E96
E24; E192
E24; E96
E24; E192
-
MBB/SMA 0207
10 to 1 M
25 ppm/K
Jumper
0.5 %
-
10 to 1 M
< 10 m; Imax. = 5 A
0.22 to 0.91
1 to 22 M
5 %
E24
50 ppm/K
25 ppm/K
1 %
E24; E96
E24; E192
E24; E96
E24; E192
MBE/SMA 0414
0.5 %
1 %
10 to 2.43 M
10 to 2.43 M
10 to 2.43 M
0.5 %
Notes
•
Resistance ranges printed in bold are preferred TCR / tolerance combinations with optimized availability
(1)
Resistance value to be selected from E24 series for 5 %, from E24/E96 series for 1 % tolerance and from E24/E192 for 0.5 % tolerance
AEC-Q200 qualification applies to products with TCR = 50 ppm/K and tolerance = 1 % in the ranges of 10 to 301 k for MBA/SMA
0204, 10 to 7.5 M for MBB/SMA 0207, and 10 to 22 M for MBE/SMA 0414
(2)
Revision: 11-Jul-2018
Document Number: 28766
5
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
PART NUMBER AND PRODUCT DESCRIPTION - CECC Approved Products
PART NUMBER: MBB0207VC1001FCT00
M
B
B
0
2
0
7
V
C
1
0
0
1
F
C
T
0
0
TYPE/SIZE
VARIANT
TCR
RESISTANCE
TOLERANCE
PACKAGING
SPECIAL
MBA0204 =
MBA/SMA 0204
MBB0207 =
MBB/SMA 0207
MBE0414 =
MBE/SMA 0414
V = CECC 06
D = 25 ppm/K
C = 50 ppm/K
Z = jumper
3 digit value
1 digit multiplier
MULTIPLIER
7 = *10-3
D = 0.5 %
F = 1 %
J = 5 %
Z = jumper
CT
C1
RP
R2
00 = standard
L0 = welding joint
not lacquered for
MBB/SMA 0207
KL = lacquered
welding joint for
MBA/SMA 0204
8 = *10-2
9 = *10-1
0 = *100
1 = *101
2 = *102
3 = *103
4 = *104
5 = *105
6 = *106
0000 = jumper
Product Description: MBB/SMA 0207-50 1 % CECC 06 CT 1K0
MBB/SMA 0207
-
50
1 %
CECC 06
CT
1K0
TYPE/SIZE
TCR
TOLERANCE
VARIANT
PACKAGING
RESISTANCE
MBA/SMA 0204
MBB/SMA 0207
MBE/SMA 0414
25 ppm/K
50 ppm/K
0.5 %
1.0 %
5.0 %
CECC 06
CECC 06 L0
CECC 06 KL
CT
C1
RP
R2
1K0 = 1 k
51R1 = 51.1
Notes
•
•
Approval is according to EN 140101-806, version A
Radial version (RB, UB) cannot be qualified according to CECC so these can only be ordered as standard products
PACKAGING
TYPE / SIZE
CODE
C1
CT
QUANTITY
1000
PACKAGING STYLE
WIDTH
PITCH
DIMENSIONS
184 mm x 75 mm x 42 mm
330 mm x 75 mm x 55 mm
Taped acc. to IEC 60286-1
fan-folded in a box
53 mm
5 mm
5000
MBA/SMA 0204
Taped acc. to IEC 60286-1
on a reel
RP
C1
CT
5000
1000
5000
53 mm
53 mm
5 mm
5 mm
242 mm x 76 mm x 86 mm
184 mm x 74 mm x 42 mm
260 mm x 78 mm x 31 mm
260 mm x 75 mm x 114 mm
324 mm x 77 mm x 82 mm
Taped acc. to IEC 60286-1
fan-folded in a box
MBB/SMA 0207 (1)
315 mm x 76 mm x 86 mm
298 mm x 75 mm x 86 mm
Taped acc.to IEC 60286-1
on a reel
Taped acc. to IEC 60286-2
fan-folded in a box
Taped acc. to IEC 60286-2
on a reel
Taped acc. to IEC 60286-2
fan-folded in a box
Taped acc. to IEC 60286-2
on a reel
Taped acc. to IEC 60286-1
fan-folded in a box
Taped acc. to IEC 60286-1
on a reel
RP
N4
R4
N4
R4
C1
R2
5000
4000
4000
4000
4000
1000
2500
53 mm
-
5 mm
330 mm x 262 mm x 45 mm
330 mm x 253 mm x 48 mm
330 mm x 262 mm x 45 mm
330 mm x 253 mm x 48 mm
374 mm x 84 mm x 47 mm
315 mm x 80 mm x 90 mm
MBB/SMA 0207
UB = 2.5 mm pitch
12.7 mm
MBB/SMA 0207
RB = 5 mm pitch
-
12.7 mm
5 mm
MBE/SMA 0414
63 mm
Note
(1)
Manufacturing at different production locations may involve use of different size box
Revision: 11-Jul-2018
Document Number: 28766
6
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
DESCRIPTION
Production is strictly controlled and follows an extensive
set of instructions established for reproducibility.
ASSEMBLY
The resistors are suitable for processing on automatic
insertion equipment and cutting and bending machines.
Excellent solderability is proven, even after extended
storage. They are suitable for automatic soldering using
wave or dipping.
A
homogeneous film of metal alloy is deposited on a high
grade ceramic body and conditioned to achieve the desired
temperature coefficient. Plated steel termination caps are
firmly pressed on the metallized rods. A special laser is used
to achieve the target value by smoothly cutting a helical
groove in the resistive layer without damaging the ceramics.
Connecting wires of electrolytic copper plated with 100 %
pure tin are welded to the termination caps. Alternative
termination wires available e.g. weldable wire (MBA/SMA
0204 only). The resistor elements are covered by a light blue
protective coating designed for electrical, mechanical and
climatic protection. Four or five color code rings designate
the resistance value and tolerance in accordance with IEC
60062.
The resistors are completely lead (Pb)-free, the pure tin
plating provides compatibility with lead (Pb)-free and
lead-containing soldering processes. The immunity of the
plating against tin whisker growth, in compliance with
IEC 60068-2-82, has been proven under extensive testing.
The encapsulant is resistant to cleaning solvent specified in
IEC 60115-1 (3). The suitability of conformal coatings, if
applied, shall be qualified by appropriate means to ensure
the long-term stability of the whole system.
All products comply with GADSL (1) and the IEC 62474 (2) list
of legal restrictions on hazardous substances. This includes
full compliance with the following directives:
The result of the determined production is verified by an
extensive testing procedure performed on 100 % of the
individual resistors. Only accepted products are stuck
directly on the adhesive tapes in accordance with
IEC 60286-1 or for the radial versions in accordance to
IEC 60286-2.
• 2000/53/EC End of Vehicle Life Directive (ELV) and
Annex II (ELVII)
• 2011/65/EU Restriction of the use of Hazardous
Substances Directive (RoHS)
• 2012/19/EU Waste Electrical and Electrical Equipment
Directive (WEEE)
MATERIALS
Vishay acknowledges the following systems for the
regulation of hazardous substances:
APPROVALS
The resistors (CECC version) are approved within the
IECQ-CECC Quality Assessment System for Electronic
Components to the detail specification EN 140101-806
which refers to EN 60115-1 and EN 140100 and the variety
of environmental test procedures of the IEC 60068
series. Conformity is attested by the use of the CECC logo
• IEC 62474, Material Declaration for Products of and for the
Electrotechnical Industry, with the list of declarable
substances given therein (1)
• The Global Automotive Declarable Substance List
(GADSL) (2)
• The REACH regulation (1907/2006/EC) and the related list
(3)
of substances with very high concern (SVHC)
supply chain
for its
(
) as the Mark of Conformity on the package label for the
CECC version.
Vishay Beyschlag of
The products do not contain any of the banned substances
as per IEC 62474, GADSL, or the SVHC list, see
www.vishay.com/how/leadfree.
Hence the products fully comply with the following
directives:
• 2000/53/EC End-of-Life Vehicle Directive (ELV) and
Annex II (ELV II)
has
achieved
“Approval
Manufacturer” in accordance with IEC QC 001002-3,
clause 2. The release certificate for “Technology Approval
Schedule” in accordance with CECC 240001 based on
IEC QC 001002-3, clause 6 is granted for the Vishay
Beyschlag manufacturing process.
• 2011/65/EU Restriction of the Use of Hazardous
RELATED PRODUCTS
For a correlated range of precision TCR and tolerance
specifications see the datasheet:
Substances
Directive
(RoHS)
with
amendment
2015/863/EU
• 2012/19/EU Waste Electrical and Electronic Equipment
Directive (WEEE)
Vishay pursues the elimination of conflict minerals from its
supply chain, see the Conflict Minerals Policy at
www.vishay.com/doc?49037.
• “Precision
Thin
Film
Leaded
Resistors”,
www.vishay.com/doc?28767
For products approved to EN 140101-806, version E, with
established reliability and failure rate level E7 (Quality factor
Q = 0.1), see the datasheet:
• “Established Reliability Thin Film Leaded Resistors”,
www.vishay.com/doc?28768
Notes
(1)
Global Automotive Declarable Substance List, see www.gadsl.org
(2)
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European
trade organisation representing the information and communications technology and consumer electronics), see
www.digitaleurope.org/SearchResults.aspx?Search=eicta.
All products comply with the IEC 62474, Material Declaration for Products of and for the Electrotechnical Industry
Other cleaning solvents with aggressive chemicals should be evaluated in actual cleaning process for their suitability
(3)
Revision: 11-Jul-2018
Document Number: 28766
7
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
FUNCTIONAL PERFORMANCE
100
80
60
40
20
0
Standard Mode
Power Mode
-55
0
50
100
125
155
180
70
Ambient Temperature in °C
Derating
T
80
K
60
40
20
MBE/SMA 0414
MBB/SMA 0207
MBA/SMA 0204
0
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
W
Load P
Rise of surface temperature
Temperature Rise
Revision: 11-Jul-2018
Document Number: 28766
8
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
MBE/SMA 0414
P
MBB/SMA 0207
MBA/SMA 0204
100
W
10
1
0.1
10 µs
100 µs
1 ms
10 ms
100 ms
1 s
10 s
Pulse Duration t
i
Maximum pulse load, single pulse; for permissible resistance change equivalent to 8000 h operation.
Single Pulse
MBE/SMA 0414
P
MBB/SMA 0207
MBA/SMA 0204
100
W
10
1
0.1
10 µs
100 µs
1 ms
10 ms
100 ms
1 s
10 s
Pulse Duration t
i
Maximum pulse load, continuous pulses; for permissible resistance change equivalent to 8000 h operation.
Continuous Pulse
MBE/SMA 0414
U
MBB/SMA 0207
MBA/SMA 0204
1 kV
100 V
10 µs
100 µs
1 ms
10 ms
100 ms
1 s
10 s
Pulse Duration
t
i
Maximum pulse voltage, single and continuous pulses; for permissible resistance change equivalent to 8000 h operation.
Pulse Voltage
Revision: 11-Jul-2018
Document Number: 28766
9
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
10 kV
1 kV
100 V
MBE/SMA 0414
MBB/SMA 0207
MBA/SMA 0204
10 V
10 Ω
100 Ω
1 kΩ
10 kΩ
100 kΩ
1 MΩ
10 MΩ
Resistance Value
R
Pulse load rating in accordance with IEC 60115-1, 4.27; 1.2 µs/50 µs; 5 pulses at 12 s intervals;
for permissible resistance change (0.5 % R + 0.05 Ω)
1.2/50 Pulse
10 kV
1 kV
MBE/SMA 0414
100 V
10 V
MBB/SMA 0207
MBA/SMA 0204
10 Ω
100 Ω
1 kΩ
10 kΩ
100 kΩ
1 MΩ
10 MΩ
Resistance Value
R
Pulse load rating in accordance with IEC 60115-1, 4.27; 10 µs/700 µs; 10 pulses at 1 minute intervals;
for permissible resistance change (0.5 % R + 0.05 Ω)
10/700 Pulse
A
1
µV/V
0.1
MBE/SMA 0414
MBB/SMA 0207
MBA/SMA 0204
0.01
100
1K
10K
100K
1M
10M
Resistance Value
Ω
R
Current noise - A1 in accordance with IEC 60195
Revision: 11-Jul-2018
Document Number: 28766
10
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
TESTS PROCEDURES AND REQUIREMENTS
All tests are carried out in accordance with the following
specifications:
Climatic category LCT / UCT / 56 (rated temperature range:
lower category temperature, upper category temperature;
damp heat, steady state, test duration: 56 days) is valid.
• EN 60115-1, generic specification (includes tests)
Unless otherwise specified the following values apply:
• Temperature: 15 °C to 35 °C
• EN 140100, sectional specification (includes schedule for
qualification approval)
• EN 140101-806 (successor of CECC 40101-806), detail
specification (includes schedule for conformance
inspection)
• Relative humidity: 45 % to 75 %
• Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).
For performing some of the tests, the components are
mounted on a test board in accordance with IEC 60115-1,
4.31.
The test and requirements table contains only the most
important tests. For the full test schedule refer to the
documents listed above.
In Test Procedures and Requirements table, only the tests
and requirements are listed with reference to the relevant
clauses of IEC 60115-1 and IEC 60068-2-xx test methods.
A short description of the test procedure is also given.
The tests are carried out in accordance with IEC 60068-2-xx
test method and under standard atmospheric conditions in
accordance with IEC 60068-1, 5.3.
TEST PROCEDURES AND REQUIREMENTS
REQUIREMENTS PERMISSIBLE CHANGE
PROCEDURE
(R max.)
IEC
60068-2
TEST
STABILITY
CLASS 0.5
STABILITY
CLASS 1
STABILITY
CLASS 2
IEC
60115-1
CLAUSE
Stability for product types:
TEST
MBA/SMA 0204
MBB/SMA 0207
MBE/SMA 0414
-
1 to 332 k
1 to 1 M
1 to 2.43 M
0.22 to < 1
0.22 to < 1
0.22 to < 1
> 332 k
> 1 M
> 2.43 M
METHOD
4.5
4.7
-
-
Resistance
Voltage proof
5 % R; 1 % R; 0.5 % R
No flashover or breakdown
URMS = Uins; 60 s
Temperature
coefficient
At (20 / -55 / 20) °C
and (20 / 155 / 20) °C
4.8
-
50 ppm/K; 25 ppm/K
Room temperature;
U = 2.5 x P70 x R or
U = 2 x Umax.; 5 s
Short time
overload
(0.1 % R + 0.01 )
no visible damage
(0.25 % R + 0.05 )
no visible damage
0.5 % R
no visible damage
4.13
-
21 (Ua1)
21 (Ub)
21 (Uc)
Robustness
of terminations
Tensile, bending,
and torsion
4.16
(0.1 % R + 0.01 )
(0.25 % R + 0.05 )
0.5 % R
+235 °C; 2 s; solder bath
method; SnPb40
+245 °C; 3 s; solder bath
method; SnAg3Cu0.5
Unmounted components;
(260 5) °C; (10 1) s
Good tinning
(> 95 % covered, no visible damage)
4.17
20 (Ta)
20 (Tb)
Solderability
(0.25 % R + 0.05 )
no visible damage
Resistance to
soldering heat
(0.1 % R + 0.01 )
0.5 % R
no visible damage
4.18.2
no visible damage
30 min at -55 °C
30 min at 155 °C
Rapid change
of temperature
5 cycles
(0.1 % R + 0.01 )
(0.5 % R + 0.05 )
(0.25 % R + 0.05 )
(0.5 % R + 0.05 )
0.5 % R
4.19
4.22
14 (Na)
MBA/SMA 0204: 500 cycles
MBB/SMA 0207: 200 cycles
MBE/SMA 0414: 100 cycles
10 sweep cycles per
direction; 10 Hz to 2000 Hz
1.5 mm or 200 m/s2
(0.5 % R + 0.05 )
6
Vibration
(0.1 % R + 0.01 )
(0.25 % R + 0.05 )
0.5 % R
Climatic
sequence:
4.23
4.23.2
4.23.3
4.23.4
4.23.5
2 (Ba)
30 (Db)
1 (Aa)
Dry heat
Damp heat,
cyclic
Cold
Low air
155 °C; 16 h
55 °C; 24 h;
90 % to 100 % RH; 1 cycle
-55 °C; 2 h
8.5 kPa; 2 h;
15 °C to 35 °C
13 (M)
pressure
(1 % R + 0.05 )
no visible damage
Damp heat,
cyclic
DC load
55 °C; 5 days;
95 % to 100 % RH; 5 cycles no visible damage
apply rated power for 1 min
(0.5 % R + 0.05 )
2 % R
no visible damage
4.23.6
4.23.7
30 (Db)
Revision: 11-Jul-2018
Document Number: 28766
11
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
TEST PROCEDURES AND REQUIREMENTS
REQUIREMENTS PERMISSIBLE CHANGE
PROCEDURE
(R max.)
IEC
60068-2
TEST
STABILITY
STABILITY
CLASS 1
0.22 to < 1
0.22 to < 1
0.22 to < 1
STABILITY
IEC
60115-1
CLAUSE
Stability for product types:
CLASS 0.5
1 to 332 k
1 to 1 M
CLASS 2
> 332 k
> 1 M
TEST
MBA/SMA 0204
MBB/SMA 0207
MBE/SMA 0414
METHOD
1 to 2.43 M
> 2.43 M
Damp heat,
steady state
(40 2) °C; 56 days;
(93 3) % RH
4.24
78 (Cab)
-
(0.5 % R + 0.05 )
(1 % R + 0.05 )
2 % R
U = P70 x R or
Endurance
at 70 °C:
power
U = Umax.
;
1.5 h on; 0.5 h off
70 °C; 1000 h
(0.5 % R + 0.05 ) (1)
(1 % R + 0.05 ) (2)
0.5 % R
1 % R
operation mode
70 °C; 8000 h
4.25.1
U = P70 x R or
Endurance
at 70 °C:
standard
U = Umax.
;
1.5 h on; 0.5 h off
70 °C; 1000 h
70 °C; 8000 h
-
(0.25 % R + 0.05 ) (3)
(0.5 % R + 0.05 ) (4)
0.25 % R
0.5 % R
operation mode
Endurance
at 125 °C
and 155 °C
125 °C; 1000 h
155 °C; 1000 h
(0.25 % R + 0.05 )
(0.5 % R + 0.05 )
(0.5 % R + 0.05 )
(1 % R + 0.05 )
1 % R
2 % R
4.25.3
4.29
-
Isopropyl alcohol (used in
industrial application)
Component
solvent
45 (XA)
Marking legible; no visible damage
resistance
+23 °C; toothbrush method
IEC 61340-3-1;
3 pos. + 3 neg.
MBA/SMA 0204: 2 kV
MBB/SMA 0207: 4 kV
MBE/SMA 0414: 6 kV
Electrostatic
discharge
(human body
model)
4.40
-
(0.5 % R + 0.05 )
Notes
(1)
(2)
(3)
(4)
(0.4 % R + 0.05 ) for MBE/SMA 0414
(0.8 % R + 0.05 ) for MBE/SMA 0414
(0.2 % R + 0.05 ) for MBE/SMA 0414
(0.4 % R + 0.05 ) for MBE/SMA 0414
Revision: 11-Jul-2018
Document Number: 28766
12
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
DIMENSIONS
D
d
L
I
M
DIMENSIONS - Leaded resistor types, mass and relevant physical dimensions
Dmax.
(mm)
Lmax.
(mm)
dnom.
(mm)
lmin.
(mm)
Mmin.
(mm)
MASS
(mg)
TYPE
MBA/SMA 0204
MBB/SMA 0207 (1)
MBE/SMA 0414
1.6
2.5
4.2
3.6
6.5
0.5
0.6
0.8
29.0
28.0
31.0
5.0
10.0 (1)
15.0
125
220
700
11.9
Note
(1)
For 7.5 M < 10.0 mm, use version MBB/SMA 0207 ... L0 (welding joint not lacquered)
MBB/SMA 0207 WITH RADIAL TAPING
LEAD SPACING (UB = 2.5 mm), SIZE 0207
P
DIMENSIONS in millimeters
Pitch of components
P
F
12.7 1.0
2.5 + 0.6 / - 0.1
18.0 + 1.0 / - 0.5
18.0 2.0
11
Insulated
Lead spacing
C
Width of carrier tape
Body to hole center
Height for cutting (max.)
Height for bending
Height for insertion (max.)
W
H
L
3 max.
H1
F
C
H1
2.5 + 0 / - 0.5
32
H
L
W
Direction of unreeling
LEAD SPACING (RB = 5.0 mm), SIZE 0207
P
DIMENSIONS in millimeters
Pitch of components
Lead spacing
P
F
12.7 1.0
5.0 + 0.6 / - 0.1
18.0 + 1.0 / - 0.5
18.0 2.0
16.0 0.5
11
Insulated
C
Width of carrier tape
W
H
3 max.
H1
Body to hole center
H
Lead crimp to hole center
Height for cutting (max.)
Height for bending
H0
L
F
H0
L
W
C
2.5 + 0 / - 0.5
32
Height for insertion (max.)
H1
Direction of unreeling
Revision: 11-Jul-2018
Document Number: 28766
13
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
HISTORICAL 12NC INFORMATION
• The resistors had a 12-digit numeric code starting with
2312
Resistance Decade
RESISTANCE DECADE
0.1 to 0.999
1 to 9.99
LAST DIGIT
• The subsequent 4 digits indicated the resistor type,
specification and packaging; see the 12NC table
7
8
9
1
2
3
4
5
6
• The remaining 4 digits indicated the resistance value:
- the first 3 digits indicated the resistance value
10 to 99.9
100 to 999
- the last digit indicated the resistance decade in
accordance with resistance decade table
1 k to 9.99 k
10 k to 99.9 k
100 k to 999 k
1 M to 9.99 M
10 M to 99.9 M
Historical 12NC Example
The 12NC code of a MBA 0204 resistor, value 47.5 k and
TCR 50 with 1 % tolerance, supplied on bandolier in a box
of 5000 units was: 2312 905 14753.
HISTORICAL 12NC - Resistor Type and Packaging
2312 ... .....
REEL
DESCRIPTION
AMMOPACK
TYPE
TCR
TOL.
5 %
1 %
0.5 %
1 %
0.5 %
-
C1 1000 units
900 3....
900 1....
900 5....
901 1....
901 5....
900 90001
910 3....
910 1....
910 5....
911 1....
911 5....
910 90001
920 3....
920 1....
920 5....
921 1....
921 5....
CT 5000 units
905 3....
905 1....
905 5....
906 1....
906 5....
905 90001
915 3....
915 1....
915 5....
916 1....
916 5....
915 90001
-
R1 1000 units
700 3....
700 1....
700 5....
701 1....
701 5....
700 90001
710 3....
710 1....
710 5....
711 1....
711 5....
710 90001
-
R2 2500 units
RP 5000 units
805 3....
805 1....
805 5....
806 1....
806 5....
805 90001
815 3....
815 1....
815 5....
816 1....
816 5....
815 90001
-
-
50 ppm/K
-
-
MBA 0204
-
25 ppm/K
Jumper
-
-
5 %
1 %
0.5 %
1 %
0.5 %
-
-
50 ppm/K
-
-
MBB 0207
MBE 0414
-
25 ppm/K
Jumper
-
-
5 %
1 %
0.5 %
1 %
0.5 %
825 3....
825 1....
825 5....
826 1....
826 5....
50 ppm/K
25 ppm/K
-
-
-
-
-
-
-
-
-
-
-
-
Revision: 11-Jul-2018
Document Number: 28766
14
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
MBA02040C1203FRP00 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
MBA02040C1204FC100 | VISHAY | RES 1.2M OHM 0.4W 1% AXIAL | 获取价格 | |
MBA02040C1204FCT00 | VISHAY | RES 1.2M OHM 0.4W 1% AXIAL | 获取价格 | |
MBA02040C1204FR1 | VISHAY | RESISTOR, THIN FILM, 0.4W, 1%, 50ppm, 1200000ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT | 获取价格 | |
MBA02040C1204FRP00 | VISHAY | RES 1.2M OHM 0.4W 1% AXIAL | 获取价格 | |
MBA02040C1208FC100 | VISHAY | RES 1.2 OHM 0.4W 1% AXIAL | 获取价格 | |
MBA02040C1208FCT | VISHAY | RESISTOR, THIN FILM, 0.4 W, 1 %, 50 ppm, 1.2 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT | 获取价格 | |
MBA02040C1208FR1 | VISHAY | RESISTOR, THIN FILM, 0.4W, 1%, 50ppm, 1.2ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT | 获取价格 | |
MBA02040C1208FRP | VISHAY | RESISTOR, THIN FILM, 0.4 W, 1 %, 50 ppm, 1.2 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT | 获取价格 | |
MBA02040C1209FCT | VISHAY | RESISTOR, THIN FILM, 0.4 W, 1 %, 50 ppm, 12 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT | 获取价格 | |
MBA02040C1209FCT00 | VISHAY | RESISTOR, THIN FILM, 0.4 W, 1 %, 50 ppm, 12 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT | 获取价格 |
MBA02040C1203FRP00 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6