MBRF1035-HE3/45 [VISHAY]
DIODE 10 A, 35 V, SILICON, RECTIFIER DIODE, TO-220AC, ROHS COMPLIANT, PLASTIC, ITO-220AC, 2 PIN, Rectifier Diode;
| 型号： | MBRF1035-HE3/45 |
| 厂家： | 
VISHAY |
| 描述： | DIODE 10 A, 35 V, SILICON, RECTIFIER DIODE, TO-220AC, ROHS COMPLIANT, PLASTIC, ITO-220AC, 2 PIN, Rectifier Diode |
| 文件： | 总5页 (文件大小：130K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MBR(F,B)1035 thru MBR(F,B)1060
Vishay General Semiconductor
Schottky Barrier Rectifier
FEATURES
TO-220AC
ITO-220AC
• Low power loss, high efficiency
• Low forward voltage drop
• High forward surge capability
• High frequency operation
2
2
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 245 °C (for TO-263AB package)
1
1
MBR10xx
PIN 1
MBRF10xx
PIN 1
• Solder dip 260 °C, 40 s (for TO-220AC and
ITO-220AC package)
CASE
PIN 2
PIN 2
TO-263AB
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
K
2
TYPICAL APPLICATIONS
1
For use in low voltage, high frequency rectifier of
switching mode power supplies, freewheeling diodes,
dc-to-dc converters and polarity protection application.
MBRB10xx
PIN 1
K
HEATSINK
PIN 2
MECHANICAL DATA
Case: TO-220AC, ITO-220AC, TO-263AB
PRIMARY CHARACTERISTICS
Epoxy meets UL 94V-0 flammability rating
IF(AV)
10 A
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test, HE3 suffix for high reliability grade
(AEC Q101 qualified), meets JESD 201 class 2
whisker test
VRRM
IFSM
35 V to 60 V
150 A
VF
0.57 V, 0.70 V
150 °C
TJ max.
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (T = 25 °C unless otherwise noted)
C
PARAMETER
SYMBOL MBR1035 MBR1045 MBR1050 MBR1060
VRRM 35 45 50 60
IF(AV)
UNIT
V
Maximum repetitive peak reverse voltage
Maximum average forward rectified current (Fig. 1)
10
A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
IFSM
150
A
Peak repetitive reverse current at tp = 2.0 µs, 1 kHz
Voltage rate of change (rated VR)
IRRM
dV/dt
TJ
1.0
0.5
A
V/µs
°C
10 000
Operating junction temperature range
Storage temperature range
- 65 to + 150
- 65 to + 175
TSTG
°C
Isolation voltage (ITO-220AC only)
from terminal to heatsink t = 1 min
VAC
1500
V
Document Number: 88669
Revision: 07-May-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
1
MBR(F,B)1035 thru MBR(F,B)1060
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted)
C
PARAMETER
TEST CONDITIONS
SYMBOL MBR1035
MBR1045
MBR1050
MBR1060
UNIT
IF = 10 A
TJ = 25 °C
TJ = 125 °C
TJ = 25 °C
TJ = 125 °C
-
0.80
Maximum instantaneous
forward voltage (1)
IF = 10 A
IF = 20 A
IF = 20 A
0.57
0.84
0.72
0.70
0.95
0.85
VF
V
Maximum instantaneous
reverse current at rated DC
blocking voltage (1)
TJ = 25 °C
TJ = 125 °C
0.10
15
IR
mA
Note:
(1) Pulse test: 300 µs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (T = 25 °C unless otherwise noted)
C
PARAMETER
SYMBOL
MBR
MBRF
MBRB
2.0
UNIT
Maximum thermal resistance from junction to case
RθJC
2.0
4.0
°C/W
ORDERING INFORMATION (Example)
PACKAGE
TO-220AC
ITO-220AC
TO-263AB
TO-263AB
TO-220AC
ITO-220AC
TO-263AB
TO-263AB
PREFERRED P/N
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
50/tube
DELIVERY MODE
Tube
MBR1045-E3/45
1.80
1.94
1.33
1.33
1.80
1.94
1.33
1.33
45
45
45
81
45
45
45
81
MBRF1045-E3/45
MBRB1045-E3/45
MBRB1045-E3/81
MBR1045HE3/45 (1)
MBRF1045HE3/45 (1)
MBRB1045HE3/45 (1)
MBRB1045HE3/81 (1)
50/tube
Tube
50/tube
Tube
800/reel
50/tube
Tape and reel
Tube
50/tube
Tube
50/tube
Tube
800/reel
Tape and reel
Note:
(1) Automotive grade AEC Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(T = 25 °C unless otherwise noted)
A
12
175
150
125
100
75
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
Resistive or Inductive Load
10
8
6
4
50
2
MBR1035 - MBR1045
MBR1050 - MBR1060
25
0
0.1
1
10
100
0
50
100
150
Number of Cycles at 60 Hz
Case Temperature (°C)
Figure 1. Forward Current Derating Curve
Figure 2. Maximum Non-Repetitive Peak Forward Surge Current
www.vishay.com
2
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 88669
Revision: 07-May-08
MBR(F,B)1035 thru MBR(F,B)1060
Vishay General Semiconductor
100
10
10 000
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
TJ = 150 °C
Pulse Width = 300 µs
1 % Duty Cycle
1
1000
TJ = 25 °C
0.1
0.01
MBR1035 - MBR1045
MBR1050 - MBR1060
MBR1035 - MBR1045
MBR1050 - MBR1060
100
0
0.2
0.4
0.6
0.8
1.0
1.2
0.1
1
10
100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Figure 3. Typical Instantaneous Forward Characteristics
Figure 5. Typical Junction Capacitance
100
100
10
1
TJ = 125 °C
10
1
0.1
TJ = 75 °C
TJ = 25 °C
MBR1035 - MBR1045
MBR1050 - MBR1060
0.01
0.001
0.1
0
20
40
60
80
100
0.01
0.1
1
10
100
Percent of Rated Peak Reverse Voltage (%)
t - Pulse Duration (s)
Figure 4. Typical Reverse Characteristics
Figure 6. Typical Transient Thermal Impedance
Document Number: 88669
Revision: 07-May-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
3
MBR(F,B)1035 thru MBR(F,B)1060
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
ITO-220AC
TO-220AC
0.404 (10.26)
0.190 (4.83)
0.170 (4.32)
0.110 (2.79)
0.100 (2.54)
0.384 (9.75)
0.415 (10.54) MAX.
0.076 (1.93) REF.
0.154 (3.91) DIA.
0.185 (4.70)
0.370 (9.40)
0.360 (9.14)
0.148 (3.74) DIA.
0.175 (4.44)
0.055 (1.39)
7° REF.
0.076 (1.93) REF.
0.113 (2.87)
0.045 (1.14)
0.103 (2.62)
0.140 (3.56) DIA.
0.125 (3.17) DIA.
0.135 (3.43) DIA.
45° REF.
0.122 (3.08) DIA.
0.145 (3.68)
0.671 (17.04)
0.651 (16.54)
0.600 (15.24)
0.135 (3.43)
7° REF.
0.580 (14.73)
0.603 (15.32)
0.573 (14.55)
PIN
0.350 (8.89)
0.330 (8.38)
0.635 (16.13)
0.350 (8.89)
0.330 (8.38)
0.625 (15.87)
1
2
PIN
1.148 (29.16)
1.118 (28.40)
1
2
7° REF.
0.191 (4.85)
0.160 (4.06)
0.140 (3.56)
0.110 (2.79)
0.100 (2.54)
0.171 (4.35)
0.560 (14.22)
0.530 (13.46)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.560 (14.22)
0.057 (1.45)
0.045 (1.14)
PIN 1
PIN 2
0.045 (1.14)
0.530 (13.46)
CASE
0.105 (2.67)
0.095 (2.41)
0.035 (0.89)
0.025 (0.64)
0.205 (5.21)
0.195 (4.95)
0.037 (0.94)
0.025 (0.64)
0.027 (0.68)
0.022 (0.56)
0.014 (0.36)
0.015 (0.38)
0.028 (0.71)
0.020 (0.51)
0.205 (5.20)
0.195 (4.95)
TO-263AB
0.411 (10.45)
0.380 (9.65)
0.245 (6.22)
MIN.
0.190 (4.83)
Mounting Pad Layout
0.42 (10.66) MIN.
0.055 (1.40)
0.045 (1.14)
0.160 (4.06)
K
0.055 (1.40)
0.047 (1.19)
0.33 (8.38) MIN.
0.360 (9.14)
0.320 (8.13)
0.624 (15.85)
1
K
2
0.591 (15.00)
0.670 (17.02)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.15 (3.81) MIN.
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.08 (2.032) MIN.
0.140 (3.56)
0.110 (2.79)
0.205 (5.20)
0.195 (4.95)
0.105 (2.67)
0.095 (2.41)
www.vishay.com
4
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 88669
Revision: 07-May-08
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号：
©2020 ICPDF网 联系我们和版权申明