MCA1206MD3520BP5 [VISHAY]
RESISTOR, THIN FILM, 0.25 W, 0.1 %, 25 ppm, 352 ohm, SURFACE MOUNT, 1206, CHIP, ROHS COMPLIANT;型号: | MCA1206MD3520BP5 |
厂家: | VISHAY |
描述: | RESISTOR, THIN FILM, 0.25 W, 0.1 %, 25 ppm, 352 ohm, SURFACE MOUNT, 1206, CHIP, ROHS COMPLIANT |
文件: | 总9页 (文件大小:138K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision
Vishay Beyschlag
Precision Thin Film Chip Resistor
Superior Moisture Resistivity
FEATURES
• Superior moisture resistivity, |ΔR/R| < 0.5 %
(85 °C; 85 % RH; 1000 h)
• Rated dissipation P70 up to 0.4 W for size 1206
• AEC-Q200 qualified
• Approved according to EN 140401-801
• Lead (Pb)-free solder contacts
• Compliant to RoHS directive 2002/95/EC
APPLICATIONS
• Automotive
• Telecommunication
• Medical equipment
• Industrial equipment
Automotive-Grade MC AT Precision Thin Film Chip
Resistors are the perfect choice for most fields of modern
precision electronics where reliability and stability is of major
concern. Typical applications include automotive,
telecommunication, industrial, medical equipment, precision
test and measuring equipment.
METRIC SIZE
INCH:
0402
0603
0805
1206
METRIC: RR 1005M RR 1608M RR 2012M RR 3216M
TECHNICAL SPECIFICATIONS
DESCRIPTION
MCS 0402 AT
RR 1005M
MCT 0603 AT
RR 1608M
MCU 0805 AT
RR 2012M
MCA 1206 AT
RR 3216M
Metric size
Resistance range
Resistance tolerance
Temperature coefficient
47 Ω to 47 kΩ
47 Ω to 100 kΩ
47 Ω to 100 kΩ
47 Ω to 100 kΩ
0.1 %
25 ppm/K; 15 ppm/K
(1)
Rated dissipation P70
0.063 W
50 V
0.125 W
0.200 W
150 V
0.400 W
200 V
Operating voltage, Umax. AC/DC
Permissible film temperature (1)
Insulation voltage
75 V
155 °C
1 min; Uins
Continuous
75 V
75 V
100 V
75 V
200 V
75 V
300 V
75 V
Note
(1)
Please refer to APPLICATION INFORMATION below
www.vishay.com
1
For technical questions, contact: thinfilmchip@vishay.com
Document Number: 28785
Revision: 19-Nov-09
MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision
Precision Thin Film Chip Resistor
Vishay Beyschlag
Superior Moisture Resistivity
APPLICATION INFORMATION
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support
of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not
exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder joint,
hence special solder alloys or board materials may be required to maintain the reliability of the assembly.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime. The designer may estimate the performance of the particular resistor application or set certain load and
temperature limits in order to maintain a desired stability.
MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION
Operation mode
Standard
Power
P70
Rated dissipation
P70
MCS 0402 AT
MCT 0603 AT
MCU 0805 AT
MCA 1206 AT
0.063 W
0.100 W
0.125 W
0.250 W
125 °C
0.100 W
0.125 W
0.200 W
0.400 W
155 °C
Film temperature
Max. resistance change at rated dissipation for
resistance range:
MCS 0402 AT
47 Ω to 47 kΩ
47 Ω to 100 kΩ
47 Ω to 100 kΩ
47 Ω to 100 kΩ
47 Ω to 47 kΩ
47 Ω to 100 kΩ
47 Ω to 100 kΩ
47 Ω to 100 kΩ
MCT 0603 AT
MCU 0805 AT
MCA 1206 AT
|ΔR/R| max., after:
1000 h
8000 h
≤ 0.1 %
≤ 0.2 %
≤ 0.6 %
≤ 0.2 %
≤ 0.4 %
-
225 000 h
Document Number: 28785
Revision: 19-Nov-09
For technical questions, contact: thinfilmchip@vishay.com
www.vishay.com
2
MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision
Precision Thin Film Chip Resistor
Vishay Beyschlag
Superior Moisture Resistivity
PART NUMBER AND PRODUCT DESCRIPTION (1)
PART NUMBER: MCT0603MD4641BPW00
M
C
T
0
6
0
3
M
D
4
6
4
1
B
P
W
0
0
MODEL/SIZE
VERSION
TCR
VALUE
TOLERANCE
PACKAGING
SPECIAL
MCS0402
MCT0603
MCU0805
MCA1206
M = AT
(Automotive)
E
D
=
=
15 ppm/K
25 ppm/K
3 digit value
1 digit
B = 0.1 %
E1
E0
P1
P5
PW
Up to 2 digits
00 = Standard
multiplier
MULTIPLIER
9 = *10-1
0 = *100
1 = *101
2 = *102
3 = *103
PRODUCT DESCRIPTION: MCT 0603 - 25 0.1 % AT PW 4K64
0603
- 25
0.1 %
AT
MCT
PW
4K64
TOLERANCE
VALUE
RESISTANCE
VALUE
MODEL
SIZE
TCR
VERSION
PACKAGING
MCS
MCT
MCU
MCA
0402
0603
0805
1206
15 ppm/K
25 ppm/K
0.1 %
AT = Automotive
E1
E0
P1
P5
PW
47K = 47 kΩ
Note
(1)
Products can be ordered using either the PART NUMBER or PRODUCT DESCRIPTION
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
DESCRIPTION
RESISTANCE VALUE (2)
TCR
25 ppm/K
15 ppm/K
Note
TOLERANCE
MCS 0402 AT
MCT 0603 AT
MCU 0805 AT
MCA 1206 AT
0.1 %
47 Ω to 47 kΩ
47 Ω to 100 kΩ
47 Ω to 100 kΩ
47 Ω to 100 kΩ
(2)
Resistance values to be selected from E96 and E192
PACKAGING
REEL
MODEL
PIECES/
PAPER TAPE ON REEL
CODE
1000
10 000
1000
E1
E0
P1
P5
PW
P1
P5
PW
P1
P5
MCS 0402 AT
MCT 0603 AT
5000
20 000
1000
MCU 0805 AT
MCA 1206 AT
5000
20 000
1000
5000
www.vishay.com
3
For technical questions, contact: thinfilmchip@vishay.com
Document Number: 28785
Revision: 19-Nov-09
MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision
Precision Thin Film Chip Resistor
Vishay Beyschlag
Superior Moisture Resistivity
DIMENSIONS
T1
WT
W
H
T2
L
DIMENSIONS AND MASS
H
L
W
(mm)
WT
(mm)
T1
(mm)
T2
(mm)
MASS
(mg)
TYPE
(mm)
(mm)
MCS 0402 AT
0.32 0.05
1.0 0.05
1.55 0.05
2.0 0.1
0.5 0.05
0.85 0.1
> 75 % of W
> 75 % of W
> 75 % of W
> 75 % of W
0.2 + 0.1/- 0.15
0.3 + 0.15/- 0.2
0.4 + 0.1/- 0.2
0.5 0.25
0.2 0.1
0.3 + 0.15/- 0.2
0.4 + 0.1/- 0.2
0.5 0.25
0.6
1.9
4.6
9.2
MCT 0603 AT 0.45 + 0.1/- 0.05
MCU 0805 AT
MCA 1206 AT
0.52 0.1
0.55 0.1
1.25 0.15
1.6 0.15
3.2 + 0.1/- 0.2
SOLDER PAD DIMENSIONS
X
G
Y
Z
RECOMMENDED SOLDER PAD DIMENSIONS
WAVE SOLDERING
REFLOW SOLDERING
TYPE
G
(mm)
Y
(mm)
X
(mm)
Z
G
(mm)
Y
(mm)
X
(mm)
Z
(mm)
(mm)
MCS 0402 AT
MCT 0603 AT
MCU 0805 AT
MCA 1206 AT
-
-
-
-
0.35
0.65
0.90
1.50
0.55
0.70
0.90
1.15
0.55
0.95
1.40
1.75
1.45
2.05
2.70
3.80
0.55
0.80
1.40
1.10
1.25
1.50
1.10
1.50
1.90
2.75
3.30
4.40
Note
• The rated dissipation applies only if the permitted film temperature is not exceeded. Furthermore, a high level of ambient temperature or of
power dissipation may raise the temperature of the solder joint, hence special solder alloys or boardmaterials may be required to maintain the
reliability of the assembly. Specified power rating above 125 °C requires dedicated heat-sink pads, which depend on boardmaterials.
The given solder pad dimensions reflect the considerations for board design and assembly as outlined e.g. in standards IEC 61188-5-x, or in
publication IPC-7351. They do not guarantee any supposed thermal properties, particularly as these are also strongly influenced by many other
parameters.
Still, the given solder pad dimensions will be found adequate for most general applications, e.g. those referring to “standard operation mode”.
Please note however that applications for “power operation mode” require special considerations for the design of solder pads and adjacent
conductor areas.
Document Number: 28785
Revision: 19-Nov-09
For technical questions, contact: thinfilmchip@vishay.com
www.vishay.com
4
MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision
Precision Thin Film Chip Resistor
Vishay Beyschlag
Superior Moisture Resistivity
DESCRIPTION
APPROVALS
Production is strictly controlled and follows an extensive
The resistors are approved within the IECQ-CECC Quality
Assessment System for Electronic Components to the detail
specification EN 140401-801 which refers to EN 60115-1,
EN 140400 and the variety of environmental test procedures
of the IEC 60068 (3) series. The detail specification refers to
the climatic categories 55/125/56, which relates to the
“standard operation mode” of this datasheet.
set of instructions established for reproducibility.
A
homogeneous film of special metal alloy is deposited on a
high grade (Al2O3) ceramic substrate and conditioned to
achieve the desired temperature coefficient. Specially
designed inner contacts are deposited on both sides. A
special laser is used to achieve the target value by smoothly
cutting a meander groove in the resistive layer without
damaging the ceramics. The resistor elements are covered
by a unique protective coating designed for electrical,
mechanical and climatic protection. The terminations receive
a final pure tin on nickel plating.
Conformity is attested by the use of the CECC Logo ( ) as
the Mark of Conformity on the package label. For
MCS 0402 AT and products with TCR 15 ppm/K the
certification according to DIN EN 140401-801:2008-05 is
pending.
The result of the determined production is verified by an
extensive testing procedure and optical inspection
performed on 100 % of the individual chip resistors. Only
accepted products are laid directly into the paper tape in
Vishay BEYSCHLAG has achieved “Approval of
Manufacturer” in accordance with IEC QC 001002-3,
clause 2. The release certificate for “Technology Approval
Schedule” in accordance with CECC 240001 based on
accordance with IEC 60286-3 (3)
.
IEC QC 001002-3, clause
6
is granted for the
Vishay BEYSCHLAG manufacturing process.
ASSEMBLY
The resistors are qualified according to AEC-Q200.
The resistors are suitable for processing on automatic SMD
assembly systems. They are suitable for automatic soldering
using wave, reflow or vapour phase as shown in
IEC 61760-1 (3). The encapsulation is resistant to all cleaning
solvents commonly used in the electronics industry,
including alcohols, esters and aqueous solutions. The
suitability of conformal coatings, if applied, shall be qualified
by appropriate means to ensure the long-term stability of the
whole system.
RELATED PRODUCTS
For more information about products with higher operation
temperature please refer to the professional datasheet
document no. 28760.
Chip resistor arrays may be used in sensing applications or
precision amplifiers where close matching between multiple
resistors is necessary. Please refer to the
ACAS AT - Precision datasheet document no. 28770.
The resistors are RoHS compliant; the pure tin plating
provides compatibility with lead (Pb)-free and
lead-containing soldering processes. Solderability is
specified for 2 years after production or requalification. The
permitted storage time is 20 years. The immunity of the
plating against tin whisker growth has been proven under
extensive testing.
(1)
All products comply with the GADSL
CEFIC-EECA-EICTA
and the
(2)
list of legal restrictions on
hazardous substances. This includes full compliance with
the following directives:
• 2000/53/EC End of Vehicle life Directive (ELV) and
Annex II (ELV II)
• 2002/95/EC Restriction of the use of Hazardous
Substances directive (RoHS)
• 2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
Notes
(1)
Global Automotive Declarable Substance List, see www.gadsl.org
(2)
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade
organisation representing the information and communications technology and consumer electronics), see www.eicta.org/index.php?id=995
→ issues → environment policy → chemicals → chemicals for electronics
(3)
The quoted IEC standards are also released as EN standards with the same number and identical contents
www.vishay.com
5
For technical questions, contact: thinfilmchip@vishay.com
Document Number: 28785
Revision: 19-Nov-09
MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision
Precision Thin Film Chip Resistor
Vishay Beyschlag
Superior Moisture Resistivity
FUNCTIONAL PERFORMANCE
Standard Mode
Power Mode
100
80
60
40
20
0
- 55
0
50
100
125
155
180
70
Ambient Temperature in °C
For permissible resistance change please refer to table MAXIMUM RESISTANCE CHANGE AT RATED POWER, above
Derating
3
A
MCS 0402 AT
MCT 0603 AT
MCU 0805 AT
MCA 1206 AT
1
µV/V
0.1
0.01
10
Ω
100
Ω
1 k
Ω
10 k
Ω
100 kΩ
1 MΩ
Resistance Value
R
Current noise A1 in accordance with IEC 60195
Current Noise
TESTS AND REQUIREMENTS
All tests are carried out in accordance with the following
specifications:
category temperature; damp heat, long term, 56 days) is
valid (LCT = - 55 °C/UCT = 125 °C).
EN 60115-1, generic specification
EN 140400, sectional specification
EN 140401-801, detail specification
Unless otherwise specified the following values apply:
Temperature: 15 °C to 35 °C
Relative humidity: 45 % to 75 %
The components are approved in accordance with the
IECQ-CECC-system, where applicable. The following table
contains only the most important tests. For the full test
schedule refer to the documents listed above. The testing
also covers most of the requirements specified by
EIA/IS-703 and JIS-C-5202.
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).
The components are mounted for testing on boards in
accordance with EN 140400, 2.3.3 unless otherwise
specified.
The requirements stated in the Test Procedures and
Requirements table are based on the required tests and
permitted limits of EN 140401-801. However, some
additional tests and a number of improvements against those
minimum requirements have been included.
The tests are carried out in accordance with IEC 60068 and
under standard atmospheric conditions in accordance with
IEC 60068-1, 5.3. Climatic category LCT/UCT/56 (rated
temperature range: Lower category temperature, upper
Document Number: 28785
Revision: 19-Nov-09
For technical questions, contact: thinfilmchip@vishay.com
www.vishay.com
6
MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision
Precision Thin Film Chip Resistor
Vishay Beyschlag
Superior Moisture Resistivity
TEST PROCEDURES AND REQUIREMENTS
IEC
60068-2
TEST
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR)
EN
60115-1
CLAUSE
TEST
PROCEDURE
STABILITY CLASS 0.25 OR BETTER (1)
METHOD
Stability for product types:
MCS 0402 AT
47 Ω to 47 kΩ
47 Ω to 100 kΩ
47 Ω to 100 kΩ
47 Ω to 100 kΩ
0.1 % R
MCT 0603 AT
MCU 0805 AT
MCA 1206 AT
4.5
-
-
Resistance
Temperature
coefficient
At (20/- 55/20) °C and
(20/155/20) °C
4.8.4.2
25 ppm/K; 15 ppm/K
U = P70 x R or U = Umax.
;
whichever is the less severe;
1.5 h on; 0.5 h off;
70 °C; 1000 h
Endurance at 70 °C:
Standard operation mode
(0.1 % R + 0.02 Ω)
(0.2 % R + 0.02 Ω)
70 °C; 8000 h
4.25.1
-
U = P70 x R or U = Umax.
;
whichever is the less severe;
1.5 h on; 0.5 h off;
70 °C; 1000 h
Endurance at 70 °C:
Power operation mode
(0.2 % R + 0.02 Ω)
(0.4 % R + 0.05 Ω)
70 °C; 8000 h
Endurance at
upper category
temperature
125 °C; 1000 h
155 °C; 1000 h
(0.15 % R + 0.02 Ω)
(0.3 % R + 0.02 Ω)
4.25.3
4.24
-
Damp heat,
steady state
(40 2) °C; 56 days;
78 (Cab)
(0.1 % R + 0.02 Ω)
(93 3) % RH
(85 2) °C
(85 5) % RH
U = 0.1 x P70 x R
≤ 100 V;
Damp heat,
steady state,
accelerated
4.39
67 (Cy)
(0.5 % R + 0.05 Ω)
1000 h
4.23
Climatic sequence:
dry heat
4.23.2
2 (Ba)
125 °C; 16 h
55 °C; 24 h; > 90 % RH;
4.23.3
30 (Db)
damp heat, cyclic
1 cycle
4.23.4
4.23.5
1 (Aa)
13 (M)
cold
- 55 °C; 2 h
(0.25 % R + 0.02 Ω)
low air pressure
8.5 kPa; 2 h; (25 10) °C
55 °C; 5 days > 90 % RH;
4.23.6
4.23.7
-
30 (Db)
-
damp heat, cyclic
DC load
5 cycles
U = P70 x R ≤ Umax.; 1 min
- 55 °C; 2 h
Storage at low
temperature
1 (Aa)
(0.05 % R + 0.01 Ω)
(0.25 % R + 0.02 Ω)
(0.05 % R + 0.01 Ω)
30 min at - 55 °C and
30 min at 125 °C;
1000 cycles
Rapid change of
temperature
4.19
4.13
14 (Na)
-
Short time overload;
standard operation mode
U = 2.5 x P70 x R
≤ 2 × Umax.; 5 s
Severity no. 4:
U = 10 x P70 x R
Single pulse high
voltage overload;
standard operation mode
4.27
-
(0.25 % R + 0.05 Ω)
≤ 2 x Umax.
;
10 pulses
Note
(1) According to the detail specification EN 140401-801 the stability class applies to the category temperatures 85 °C and 125 °C and their
respective test conditions.
www.vishay.com
7
For technical questions, contact: thinfilmchip@vishay.com
Document Number: 28785
Revision: 19-Nov-09
MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision
Precision Thin Film Chip Resistor
Vishay Beyschlag
Superior Moisture Resistivity
TEST PROCEDURES AND REQUIREMENTS
IEC
60068-2
TEST
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR)
EN
60115-1
CLAUSE
TEST
PROCEDURE
STABILITY CLASS 0.25 OR BETTER (1)
METHOD
Stability for product types:
MCS 0402 AT
47 Ω to 47 kΩ
47 Ω to 100 kΩ
47 Ω to 100 kΩ
47 Ω to 100 kΩ
MCT 0603 AT
MCU 0805 AT
MCA 1206 AT
U = 15 x P70 x R
Periodic electric
overload;
standard operation mode
≤ 2 x Umax.
;
4.37
4.40
-
-
(0.5 % R + 0.05 Ω)
0.1 s on; 2.5 s off;
1000 cycles
IEC 61340-3-1;
3 pos. + 3 neg.
(equivalent to MIL-STD-883,
Method 3015)
ESD
(0.5 % R + 0.05 Ω)
(Electro Static Discharge)
MCS 0402 AT: 500 V
MCT 0603 AT: 1000 V
MCU 0805 AT: 1500 V
MCA 1206 AT: 2000 V
Endurance by sweeping;
10 Hz to 2000 Hz;
no resonance;
(0.05 % R + 0.01 Ω)
no visible damage
4.22
6 (Fc)
Vibration
amplitude ≤ 1.5 mm or
≤ 200 m/s2; 6 h
Solder bath method;
SnPb40; non-activated flux
(215 3) °C; (3 0.3) s
Good tinning (≥ 95 % covered);
no visible damage
4.17.2
58 (Td)
Solderability
Solder bath method;
SnAg3Cu0.5 or SnAg3.5;
non-activated flux;
Good tinning (≥ 95 % covered);
no visible damage
(235 3) °C; (2 0.2) s
Resistance to
soldering heat
Solder bath method;
(260 5) °C; (10 1) s
(0.05 % R + 0.01 Ω)
4.18.2
4.29
58 (Td)
45 (XA)
no visible damage
Component solvent
resistance
Isopropyl alcohol + 50 °C;
No visible damage
No visible damage
method 2
RR 1005M and
RR 1608M; 9 N
4.32
4.33
21 (Ue3)
21 (Ue1)
Shear (adhesion)
RR 2012M and
RR 3216M; 45 N
(0.05 % R + 0.01 Ω)
no visible damage; no open circuit in bent position
Substrate bending
Depth 2 mm, 3 times
4.7
-
-
Voltage proof
Flammability
URMS = Uins; (60 5) s
No flashover or breakdown
No burning after 30 s
4.35
Needle flame test; 10 s
Document Number: 28785
Revision: 19-Nov-09
For technical questions, contact: thinfilmchip@vishay.com
www.vishay.com
8
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
MCA1206MD3602BP1
Fixed Resistor, Thin Film, 0.25W, 36000ohm, 200V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 1206, CHIP
VISHAY
MCA1206MD3602BP5
Fixed Resistor, Thin Film, 0.25W, 36000ohm, 200V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 1206, CHIP
VISHAY
MCA1206MD3612BP1
RESISTOR, THIN FILM, 0.25 W, 0.1 %, 25 ppm, 36100 ohm, SURFACE MOUNT, 1206, CHIP, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明