MCN1009N392MCB [VISHAY]

BUSSED C NETWORK, 50V, C0G, 0.0039uF, THROUGH HOLE MOUNT, SIP-10, SIP, ROHS COMPLIANT;


型号：	MCN1009N392MCB
厂家：	VISHAY
描述：	BUSSED C NETWORK, 50V, C0G, 0.0039uF, THROUGH HOLE MOUNT, SIP-10, SIP, ROHS COMPLIANT 电容器
文件：	总3页 (文件大小：61K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MCN

Vishay Techno

Thick Film Capacitor Networks,

Single-In-Line, Molded SIP

FEATURES

 Isolated and bussed schematics available

 Custom schematics available

 NP0 or X7R capacitors for line terminator

operating temperature range

 Wide

(- 55 °C to 125 °C)

 Molded epoxy case

 Solder coated copper terminals

 Solderability per MIL-STD-202 method 208E

Marking resistance to solvents per MIL-STD-202 method 215

 Compliant to RoHS Directive 2002/95/EC



STANDARD ELECTRICAL SPECIFICATIONS

CAPACITANCE RANGE

CAPACITANCE TOLERANCE ⁽²⁾

ꢀ

CAPACITANCE VOLTAGE

MODEL

SCHEMATIC

V_DC

NP0 ⁽¹⁾

X7R

33 pF to 3900 pF

470 pF to 0.1 µF

10, 20

MCN

Notes

⁽¹⁾NP0 capacitors may be substituted for X7R capacitors

⁽²⁾Tighter tolerances available on request

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: MCN0801N101KTB (preferred part number format)

GLOBAL

MODEL

CAPACITANCE

VALUE

TERMINAL

FINISH

PIN COUNT SCHEMATIC CHARACTERISTICS

TOLERANCE

PACKAGING

MCN

08 = 8 pin

09 = 9 pin

10 = 10 pin

N = NP0

X = X7R

(in picofarads)

2 digit significant

figure, followed

by a multiplier

101 = 100 pF

392 = 3000 pF

104 = 0.1 µF

= 10 %

= 20 %

= Sn90/Pb10

= Bulk

C =

Sn95.5/Ag3.9/Cu0.6

Historical Part Numbering: MCN0801101KS10 (will continue to be accepted)

MCN

101

S10

HISTORICAL

MODEL

CAPACITANCE

VALUE

TERMINAL

FINISH

PIN COUNT

SCHEMATIC

TOLERANCE

*Pb containing terminations are not RoHS compliant, exemptions may apply

Document Number: 68004

Revision: 09-Mar-11

For technical questions, contact: te1resistors@vishay.com

www.vishay.com

MCN

Thick Film Capacitor Networks,

Single-In-Line, Molded SIP

Vishay Techno

SCHEMATICS

DIMENSIONS in inches (millimeters)

SCHEMATIC 01

0ꢁ150 0ꢁ010

(3ꢁ81 0ꢁ254)

Pin #1 Identifier

n-1

(Seating

Plane)

0ꢁ020 0ꢁ002

(0ꢁ508 0ꢁ051)

SCHEMATIC 02

0ꢁ020 0ꢁ002

(0ꢁ508 0ꢁ051)

0ꢁ125 0ꢁ015

(3ꢁ18 0ꢁ381)

0ꢁ100 0ꢁ005 (2ꢁ54 0ꢁ127)

Non-Cumulative

0ꢁ010 0ꢁ002

(0ꢁ254 0ꢁ051)

NUMBER

OF PINS

SCHEMATIC 09

0ꢁ010 (0ꢁ254)

0.325 (8.26)

0.246 (6.25)

0.316 (8.03)

0ꢁ010 (0ꢁ254)

0.780 (19.81)

0.940 (23.88)

1.040 (26.42)

0.040 (1.02)

0.075 (1.91)

n-1

Note

• Custom schematics available

www.vishay.com

For technical questions, contact: te1resistors@vishay.com

Document Number: 68004

Revision: 09-Mar-11

Legal Disclaimer Notice

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000

Revision: 11-Mar-11

www.vishay.com

MCN1009N392MCB [VISHAY]

相关型号：

MCN1009N392MTB

MCN1009N680KCB

MCN1009X101KTB

MCN1009X101MTB

MCN1009X102KTB

MCN1009X104KTB

MCN1009X104MTB

MCN1009X152KTB

MCN1009X272KCB

MCN1009X392KTB

MCN1009X392MTB

MCN1009X821KCB