MCU08050Z4641DP5 [VISHAY]
Professional Thin Film Chip Resistors; 专业薄膜片式电阻器型号: | MCU08050Z4641DP5 |
厂家: | VISHAY |
描述: | Professional Thin Film Chip Resistors |
文件: | 总12页 (文件大小:165K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional
www.vishay.com
Vishay Beyschlag
Professional Thin Film Chip Resistors
FEATURES
• Approved to EN 140401-801
• Excellent overall stability: Class 0.5
• Professional tolerance of value: 0.5 % and 1 %
• Lead (Pb)-free solder contacts
• Waste gas resistance verified by ASTM B 809
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
MCS 0402, MCT 0603, MCU 0805 and MCA 1206
APPLICATIONS
• Automotive
professional thin film flat chip resistors are the perfect
choice for most fields of modern professional electronics
where reliability and stability is of major concern. Typical
• Telecommunication
• Medical equipment
• Industrial equipment
applications
include
telecommunication,
medical
equipment and high-end computer and audio/video
electronics.
TECHNICAL SPECIFICATIONS
MCS 0402
MCT 0603
MCU 0805
0805
MCA 1206
1206
Imperial size
0402
0603
Metric size code
Resistance range
Resistance tolerance
Temperature coefficient
Operation mode
RR1005M
RR1608M
RR2012M
RR3216M
10 to 4.99 M; 0
1 to 10 M; 0
1 to 10 M; 0
1 to 2 M; 0
1 %; 0.5 %
50 ppm/K; 25 ppm/K
Standard
0.063 W
Power
0.1 W
Standard
0.1 W
Power
Standard
0.125 W
Power
0.2 W
Standard
Power
0.4 W
(1)
Rated dissipation, P70
0.125 W
0.25 W
Operating voltage, Umax. AC/DC
50 V
75 V
150 V
200 V
Permissible film temperature,
F max.
125 °C
155 °C
125 °C
155 °C
125 °C
155 °C
125 °C
155 °C
- 55 °C to
125 °C
- 55 °C to
155 °C
- 55 °C to
125 °C
- 55 °C to
155 °C
- 55 °C to
125 °C
- 55 °C to
155 °C
- 55 °C to
125 °C
- 55 °C to
155 °C
Operating temperature range
Max. resistance change at P70
for resistance range,
|R/R| max., after:
10 to 4.99 M
1 to 10 M
1 to 10 M
1 to 2 M
1000 h
8000 h
0.25 %
0.5 %
1.5 %
0.5 %
1.0 %
-
0.25 %
0.5 %
1.5 %
0.5 %
1.0 %
-
0.25 %
0.5 %
1.5 %
0.5 %
1.0 %
-
0.25 %
0.5 %
1.5 %
0.5 %
1.0 %
-
225 000 h
Insulation voltage:
1 min; Uins
75 V
75 V
0.1 x 10-9/h
100 V
75 V
0.1 x 10-9/h
200 V
75 V
0.1 x 10-9/h
300 V
Continuous
75 V
Failure rate: FITobserved
0.1 x 10-9/h
Notes
•
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded.
(1)
Revision: 24-Jan-13
Document Number: 28705
1
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional
www.vishay.com
Vishay Beyschlag
PART NUMBER AND PRODUCT DESCRIPTION
Part Number: MCT06030D4641DPW00
M
C
T
0
6
0
3
0
D
4
6
4
1
D
P
W
0
0
TYPE/SIZE
VERSION
TCR
RESISTANCE
TOLERANCE
PACKAGING
MCS0402
MCT0603
MCU0805
MCA1206
0 = Neutral
D = 25 ppm/K
C = 50 ppm/K
Z = Jumper
3 digit value
1 digit
D = 0.5 %
F = 1 %
Z = Jumper
P5
PW
E0
multiplier
MULTIPLIER
8 = *10-2
9 = *10-1
0 = *100
1 = *101
2 = *102
3 = *103
4 = *104
5 = *105
0000 = Jumper
Product Description: MCT 0603-25 0.5 % PW 4K64
MCT
0603
-25
0.5 %
PW
4K64
TYPE
SIZE
TCR
TOLERANCE
PACKAGING
RESISTANCE
MCS
MCT
MCU
MCA
0402
0603
0805
1206
25 ppm/K
50 ppm/K
0.5 %
1 %
P5
PW
E0
4K64 = 4.64 k
50R1 = 50.1
0R0 = Jumper (1)
Notes
•
(1)
Products can be ordered using either the PRODUCT DESCRIPTION or PART NUMBER.
Jumpers are ordered by the resistance value 0 , e.g. MCT 0603 P5 0R0.
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
DESCRIPTION
RESISTANCE RANGE
TCR
50 ppm/K
25 ppm/K
Jumper
Notes
TOLERANCE
1 %
MCS 0402
10 to 4.99 M
10 to 221 k
10 to 221 k
20 m
MCT 0603
1 to 10 M
10 to 511 k
10 to 511 k
20 m
MCU 0805
1 to 10 M
10 to 1.5 M
10 to 1.5 M
20 m
MCA 1206
1 to 2 M
10 to 2 M
10 to 2 M
20 m
0.5 %
0.5 %
-
Imax. = 0.63 A
Imax. = 1 A
Imax. = 1.5 A
Imax. = 2 A
•
•
Resistance values are available for 1 % tolerance from the E24 and E96 series; for 0.5 % tolerance from the E24 and E192 series.
Resistance ranges printed in bold are preferred TCR/tolerance combinations with optimized availability.
PACKAGING
TYPE
CODE
E0
QUANTITY
10 000
5000
CARRIER TAPE
WIDTH
PITCH
REEL DIAMETER
180 mm/7"
MCS 0402
2 mm
P5
180 mm/7"
MCT 0603
Paper tape acc.
IEC 60286-3
type I
PW
P5
20 000
5000
330 mm/13"
180 mm/7"
8 mm
4 mm
MCU 0805
MCA 1206
PW
P5
20 000
5000
330 mm/13"
180 mm/7"
Revision: 24-Jan-13
Document Number: 28705
2
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional
www.vishay.com
Vishay Beyschlag
DIMENSIONS
Tt
WT
W
H
Tb
L
DIMENSIONS AND MASS
H
L
W
(mm)
WT
(mm)
Tt
(mm)
Tb
(mm)
MASS
(mg)
TYPE
(mm)
(mm)
MCS 0402
0.32 0.05
1.0 0.05
1.55 0.05
2.0 0.1
0.5 0.05
0.85 0.1
1.25 0.15
1.6 0.15
> 75 % of W
> 75 % of W
> 75 % of W
> 75 % of W
0.2 + 0.1/- 0.15
0.3 + 0.15/- 0.2
0.4 + 0.1/- 0.2
0.5 0.25
0.2 0.1
0.3 + 0.15/- 0.2
0.4 + 0.1/- 0.2
0.5 0.25
0.6
1.9
4.6
9.2
MCT 0603 0.45 + 0.1/- 0.05
MCU 0805 0.45 + 0.1/- 0.05
MCA 1206
0.55 0.1
3.2 + 0.1/- 0.2
SOLDER PAD DIMENSIONS
X
G
Y
Z
RECOMMENDED SOLDER PAD DIMENSIONS
WAVE SOLDERING
REFLOW SOLDERING
TYPE
G
(mm)
Y
(mm)
X
(mm)
Z
(mm)
G
(mm)
Y
(mm)
X
(mm)
Z
(mm)
MCS 0402
MCT 0603
MCU 0805
MCA 1206
-
-
-
-
0.35
0.65
0.90
1.50
0.55
0.70
0.90
1.15
0.55
0.95
1.40
1.75
1.45
2.05
2.70
3.80
0.55
0.80
1.40
1.10
1.25
1.50
1.10
1.50
1.90
2.75
3.30
4.40
Note
•
The rated dissipation applies only if the permitted film temperature is not exceeded. Furthermore, a high level of ambient temperature or of
power dissipation may raise the temperature of the solder joint, hence special solder alloys or board materials may be required to maintain
the reliability of the assembly.
Specified power rating above 125 °C requires dedicated heat-sink pads, which depend on board materials.
The given solder pad dimensions reflect the considerations for board design and assembly as outlined e.g. in standards IEC 61188-5-x, or
in publication IPC-7351. They do not guarantee any supposed thermal properties, particularly as these are also strongly influenced by many
other parameters.
Still, the given solder pad dimensions will be found adequate for most general applications, e.g. those referring to “standard operation
mode”. Please note however that applications for “power operation mode” require special considerations for the design of solder pads and
adjacent conductor areas.
Revision: 24-Jan-13
Document Number: 28705
3
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional
www.vishay.com
Vishay Beyschlag
DESCRIPTION
Production is strictly controlled and follows an extensive set
of instructions established for reproducibility.
APPROVALS
The resistors are approved within the IECQ-CECC Quality
Assessment System for Electronic Components to the detail
specification EN 140401-801 which refers to EN 60115-1,
EN 140400 and the variety of environmental test procedures
of the IEC 60068 (3) series. The detail specification refers to
the climatic category 55/125/56, which relates to the
“standard operation mode” of this datasheet.
A
homogeneous film of metal alloy is deposited on a high
grade (Al2O3) ceramic substrate and conditioned to achieve
the desired temperature coefficient. Specially designed
inner contacts are deposited on both sides. A special laser
is used to achieve the target value by smoothly cutting a
meander groove in the resistive layer without damaging the
ceramics. For the high and low ohmic range, optimized
Cermet products provide comparable properties. The
resistor elements are covered by a protective coating
designed for electrical, mechanical and climatic protection.
The terminations receive a final pure tin on nickel plating.
Conformity is attested by the use of the CECC logo (
the mark of conformity on the package label.
) as
Vishay BEYSCHLAG has achieved “Approval of
Manufacturer” in accordance with IECQ 03-1. The release
certificate for “Technology Approval Schedule” in
accordance with CECC 240001 based on IECQ 03-3 is
granted for the Vishay BEYSCHLAG manufacturing
process.
The result of the determined production is verified by an
extensive testing procedure and optical inspection
performed on 100 % of the individual chip resistors. This
includes full screening for the elimination of products with
potential risk of early field failures (feasible for R 10 ).
Only accepted products are laid directly into the paper tape
RELATED PRODUCTS
For more information about products with better TCR and
tighter tolerance please refer to the Precision Thin Film
Chip Resistors datasheet (www.vishay.com/doc?28700).
in accordance with IEC 60286-3 (3)
.
Resistors are available with established reliability in
accordance with EN 140401-801 version E. Please refer to
the special datasheet (www.vishay.com/doc?28744) for
information on failure rate level, available resistance ranges
and order codes.
ASSEMBLY
The resistors are suitable for processing on automatic SMD
assembly systems. They are suitable for automatic
soldering using wave, reflow or vapour phase as shown in
IEC 61760-1. The encapsulation is resistant to all cleaning
solvents commonly used in the electronics industry,
including alcohols, esters and aqueous solutions. The
suitability of conformal coatings, if applied, shall be qualified
by appropriate means to ensure the long-term stability of the
whole system.
Precision chip resistor arrays may be used in voltage
divider applications or precision amplifiers where close
matching between multiple resistors is necessary. ACAS
0612 chip arrays are specified by the following datasheets:
• Professional type (www.vishay.com/doc?28754)
• Precision type (www.vishay.com/doc?28751)
The resistors are RoHS compliant, the pure tin plating
provides
compatibility
with
lead
(Pb)-free
and
lead-containing soldering processes. Solderability is
specified for 2 years after production or requalification. The
permitted storage time is 20 years. The immunity of the
plating against tin whisker growth has been proven under
extensive testing.
(1)
All products comply with the GADSL
CEFIC-EECA-EICTA
and the
(2)
list of legal restrictions on
hazardous substances. This includes full compliance with
the following directives:
• 2000/53/EC End of Vehicle life Directive (ELV) an Annex II
(ELV II)
• 2011/65/EU Restriction of the use of Hazardous
Substances Directive (RoHS)
• 2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
Notes
(1)
Global Automotive Declarable Substance List, see www.gadsl.org.
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade
organisation representing the information and communications technology and consumer electronics), see
(2)
www.eicta.org/index.php?id=995 issues environment policy chemicals chemicals for electronics.
The quoted IEC standards are also released as EN standards with the same number and identical contents.
(3)
Revision: 24-Jan-13
Document Number: 28705
4
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional
www.vishay.com
Vishay Beyschlag
FUNCTIONAL PERFORMANCE
P
MCS 0402
MCT 0603
MCU 0805
MCA 1206
0.2
W
0.1
0
°C
- 50
0
50
70
100
150
Ambient Temperature
ϑamb
Derating - Standard Operation
0.5
P
MCS 0402
MCT 0603
MCU 0805
MCA 1206
0.4
0.3
W
0.2
0.1
°C
Ambient Temperature
- 50
0
50
70
100
150
ϑamb
Derating - Power Operation
^
MCS 0402
MCT 0603
MCU 0805
MCA 1206
P
100
W
10
1
0.1
10 µs
100 µs
1 ms
10 ms
100 ms
1 s
Pulse Duration ti
Maximum pulse load, single pulse; applicable if P 0 and n 1000 and Û Ûmax.
10 s
;
for permissible resistance change equivalent to 8000 h operation in standard operation mode
Single Pulse
Revision: 24-Jan-13
Document Number: 28705
5
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional
www.vishay.com
Vishay Beyschlag
^
MCS 0402
P
100
MCT 0603
MCU 0805
W
MCA 1206
10
1
0.1
10 µs
100 µs
1 ms
10 ms
100 ms
1 s
10 s
Pulse Duration
ti
Maximum pulse load, continuous pulses; applicable if P P (amb) and Û Ûmax.
;
for permissible resistance change equivalent to 8000 h operation in standard operation mode
Continuous Pulse
1 kV
Û
100 V
MCS 0402
MCT 0603
MCU 0805
MCA 1206
10 V
10 µs
100 µs
1 ms
10 ms
100 ms
1 s
10 s
Pulse Duration
ti
ˆ
ˆ
Maximum pulse voltage, single and continuous pulses; applicable if P P max.
;
for permissible resistance change equivalent to 8000 h operation in standard operation mode
Pulse Voltage
MCS 0402
10 kV
MCT 0603
MCU 0805,
MCA 1206
1 kV
100 V
10 V
10 Ω
100 Ω
1 kΩ
10 kΩ
100 kΩ
1 MΩ
10 MΩ
Resistance Value R
Pulse load rating in accordance with EN 60115-1 clause 4.27; 1.2 µs/50 µs; 5 pulses at 12 s interval;
for permissible resistance change (0.5 ꢀ R + 0.05 )
1.2/50 Pulse
Revision: 24-Jan-13
Document Number: 28705
6
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional
www.vishay.com
Vishay Beyschlag
MCS 0402
10 kV
MCT 0603
MCU 0805,
MCA 1206
1 kV
100 V
10 V
10
Ω
100
Ω
1 k
Ω
10 k
Ω
100 k
Ω
1 MΩ
10 MΩ
Resistance Value R
Pulse load rating in accordance with EN 60115-1 clause 4.27; 10 µs/700 µs;
10 pulses at 1 min intervals; for permissible resistance change (0.5 ꢀ R + 0.05 )
10/700 Pulse
10
µV/V
A
1
0.1
MCS 0402
MCT 0603
MCU 0805
MCA 1206
0.01
100
Ω
1 kΩ
10 kΩ
100 kΩ
1 M
Ω
Resistance Value
R
Current noise A1 in accordance with IEC 60195
Current Noise
R
2.0
Z
1.5
1.0
MCT 0603
MCU 0805
0.5
0.1
0.3
1
GHz
20
3
10
Frequency
f
|Z|/R for 49.9 chip resistor
RF-Behaviour
Revision: 24-Jan-13
Document Number: 28705
7
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional
www.vishay.com
Vishay Beyschlag
TESTS AND REQUIREMENTS
All tests are carried out in accordance with the following
specifications:
Unless otherwise specified the following values apply:
Temperature: 15 °C to 35 °C
EN 60115-1, generic specification (includes tests)
Relative humidity: 45 % to 75 %
EN 140400, sectional specification (includes schedule for
qualification approval)
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).
The components are mounted for testing on boards in
accordance with EN 60115-1, 4.31 unless otherwise
specified.
EN 140401-801, detail specification (includes schedule for
conformance inspection)
The components are approved in accordance with the
European CECC-system, where applicable. The following
table contains only the most important tests. For the full test
schedule refer to the documents listed above. The testing
also covers most of the requirements specified by
EIA/IS-703 and JIS-C-5202.
The requirements stated in the Test Procedures and
Requirements table are based on the required tests and
permitted limits of EN 140401-801. However, some
additional tests and a number of improvements against
those minimum requirements have been included.
The tests are carried out in accordance with IEC 60068 and
under standard atmospheric conditions in accordance with
IEC 60068-1, 5.3. Climatic category LCT/UCT/56 (rated
temperature range: Lower category temperature, upper
category temperature; damp heat, long term, 56 days) is
valid.
TEST PROCEDURES AND REQUIREMENTS
IEC
REQUIREMENTS
EN
60115-1
CLAUSE
60068-2
PERMISSIBLE CHANGE (R)
TEST
PROCEDURE
TEST
METHOD
STABILITY CLASS 0.5
STABILITY CLASS 1
Stability for product types:
MCS 0402
10 to 33.2 k
10 to 100 k
10 to 221 k
10 to 332 k
> 33.2 kto 4.99 M
1 to < 10 ;
> 100 k to 10 M
MCT 0603
MCU 0805
1 to < 10 ;
> 221 k to 10 M
1 to < 10 ;
> 332 k to 2 M
MCA 1206
4.5
-
-
Resistance
-
1 % R; 0.5 % R
Temperature
coefficient
At (20/- 55/20) °C and
(20/125/20) °C
4.8.4.2
50 ppm/K; 25 ppm/K
U = P70 x R or U = Umax.
whichever is the less
severe;
;
;
Endurance
at 70 °C:
Standard
1.5 h on; 0.5 h off;
operation mode
70 °C; 1000 h
70 °C; 8000 h
(0.25 % R + 0.05 )
(0.5 % R + 0.05 )
4.25.1
-
U = P70 x R or U = Umax.
whichever is the less
severe;
Endurance
at 70 °C:
Power
1.5 h on; 0.5 h off;
operation mode
70 °C; 1000 h
70 °C; 8000 h
125 °C; 1000 h
(0.5 % R + 0.05 )
(1 % R + 0.05 )
Endurance at
upper category
temperature
(0.25 % R + 0.05 )
(0.5 % R + 0.05 )
(1 % R + 0.05 )
4.25.3
4.24
-
155 °C; 1000 h
(0.5 % R + 0.05 )
(0.5 % R + 0.05 )
Damp heat,
steady state
(40 2) °C; 56 days;
(93 3) % RH
78 (Cab)
(1 % R + 0.05 )
Revision: 24-Jan-13
Document Number: 28705
8
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional
www.vishay.com
Vishay Beyschlag
TEST PROCEDURES AND REQUIREMENTS
IEC
60068-2
TEST
REQUIREMENTS
EN
60115-1
CLAUSE
PERMISSIBLE CHANGE (R)
TEST
PROCEDURE
STABILITY CLASS 0.5
STABILITY CLASS 1
METHOD
Stability for product types:
MCS 0402
10 to 33.2 k
10 to 100 k
10 to 221 k
10 to 332 k
> 33.2 kto 4.99 M
1 to < 10 ;
> 100 k to 10 M
MCT 0603
MCU 0805
MCA 1206
1 to < 10 ;
> 221 k to 10 M
1 to < 10 ;
> 332 k to 2 M
Climatic
sequence:
Standard
4.23
operation mode:
4.23.2
4.23.3
2 (Ba)
Dry heat
125 °C; 16 h
Damp heat,
cyclic
55 °C; 24 h; > 90 % RH;
1 cycle
30 (Db)
4.23.4
4.23.5
1 (Aa)
13 (M)
Cold
- 55 °C; 2 h
(0.5 % R + 0.05 )
(0.1 % R + 0.01 )
(1 % R + 0.05 )
Low air pressure
8.5 kPa; 2 h; (25 10) °C
Damp heat,
cyclic
55 °C; 24 h; > 90 % RH;
5 cycles
4.23.6
30 (Db)
U = P70 x R Umax.
;
4.23.7
-
-
DC load
Cold
1 min.
1 (Aa)
- 55 °C; 2 h
(0.25 % R + 0.05 )
30 min at LCT and
30 min at UCT;
LCT = - 55 °C;
UCT = 125 °C;
5 cycles
(0.1 % R + 0.01 )
no visible damage
Rapid change
of temperature
4.19
14 (Na)
LCT = - 55 °C;
UCT = 125 °C;
1000 cycles
(0.25 % R + 0.05 )
no visible damage
Short time
overload:
Standard
U = 2.5 x P70 x R
or U = 2 x Umax.
;
(0.1 % R + 0.01 )
(0.25 % R + 0.05 )
(0.5 % R + 0.05 )
whichever is the less severe;
5 s
operation mode
4.13
4.27
-
-
Short time
overload:
Power
U = 2.5 x P70 x R
or U = 2 x Umax.
;
(0.25 % R + 0.05 )
whichever is the less severe;
5 s
operation mode
Severity no. 4:
U = 10 x P70 x R
or U = 2 x Umax.
whichever is the less severe;
10 pulses 10 μs/700 μs
Single pulse high
voltage overload:
Standard
(0.5 % R + 0.05 )
no visible damage
;
operation mode
U = 15 x P70 x R
Periodic electric
overload:
Standard
operation mode
or U = 2 x Umax.
;
(0.5 % R + 0.05 )
no visible damage
0.1 s on; 2.5 s off;
whichever is the less severe;
1000 cycles
4.37
-
U = 15 x P70 x R
Periodic electric
overload:
Power
operation mode
or U = 2 x Umax.
;
(1 % R + 0.05 )
no visible damage
0.1 s on; 2.5 s off;
whichever is the less severe;
1000 cycles
Revision: 24-Jan-13
Document Number: 28705
9
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional
www.vishay.com
Vishay Beyschlag
TEST PROCEDURES AND REQUIREMENTS
IEC
60068-2
TEST
REQUIREMENTS
EN
60115-1
CLAUSE
PERMISSIBLE CHANGE (R)
TEST
PROCEDURE
STABILITY CLASS 0.5
STABILITY CLASS 1
METHOD
Stability for product types:
MCS 0402
10 to 33.2 k
10 to 100 k
10 to 221 k
10 to 332 k
> 33.2 kto 4.99 M
1 to < 10 ;
> 100 k to 10 M
MCT 0603
MCU 0805
MCA 1206
1 to < 10 ;
> 221 k to 10 M
1 to < 10 ;
> 332 k to 2 M
IEC 61340-3-1;
3 pos. + 3 neg.
(equivalent to MIL-STD-883,
method 3015)
Electro static
discharge
(Human Body
Model)
4.40
-
(0.5 % R + 0.05 )
MCS 0402: 500 V
MCT 0603: 1000 V
MCU 0805: 1500 V
MCA 1206: 2000 V
Endurance by sweeping;
10 Hz to 2000 Hz;
no resonance; amplitude
1.5 mm or 200 m/s2;
7.5 h
(0.1 % R + 0.01 )
no visible damage
4.22
6 (Fc)
Vibration
Solder bath method;
SnPb40; non-activated flux;
(215 3) °C; (3 0.3) s
Good tinning ( 95 % covered);
no visible damage
4.17.2
58 (Td)
Solderability
Solder bath method;
SnAg3Cu0.5 or SnAg3.5;
non-activated flux;
Good tinning ( 95 % covered);
no visible damage
(235 3) °C; (2 0.2) s
Resistance to
soldering heat
Solder bath method;
(260 5) °C; (10 1) s
(0.1 % R + 0.01 )
no visible damage
(0.25 % R + 0.05 )
no visible damage
4.18.2
4.29
58 (Td)
45 (XA)
Component
solvent
resistance
Isopropyl alcohol + 50 °C;
method 2
No visible damage
RR1005M and RR1608M;
9 N
Shear
(adhesion)
4.32
21 (Ue3)
No visible damage
RR2012M and RR3216M;
45 N
Substrate
bending
(0.1 % R + 0.01 )
no visible damage, no open circuit in bent position
4.33
4.7
21 (Ue1)
Depth 2 mm, 3 times
-
-
Voltage proof
Flammability
U
RMS = Uins; (60 5) s
No flashover or breakdown
No burning after 30 s
IEC 60695-11-5,
needle flame test; 10 s
4.35
Revision: 24-Jan-13
Document Number: 28705
10
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional
www.vishay.com
Vishay Beyschlag
Last Digit of 12NC Indicating Resistance Decade
HISTORICAL 12NC INFORMATION
• The resistors had a 12-digit numeric code starting with
2312.
RESISTANCE DECADE
1 to 9.99
LAST DIGIT
8
9
1
2
3
4
5
6
• The subsequent 4 digits indicated the resistor type,
specification and packaging; see the 12NC table.
10 to 99.9
• The remaining 4 digits indicated the resistance value:
- The first 3 digits indicated the resistance value.
100 to 999
1 k to 9.99 k
10 k to 99.9 k
100 k to 999 k
1 M to 9.99 M
10 M to 99.9 M
- The last digit indicated the resistance decade in
accordance with the last digit of 12NC indicating
resistance decade table.
Historical 12NC example
The 12NC of a MCT 0603 resistor, value 47 k and TCR 50
with 1 % tolerance, supplied in cardboard tape of
5000 units per reel was: 2312 215 14703.
HISTORICAL 12NC - Resistor type and packaging
2312... .....
DESCRIPTION
CARDBOARD TAPE ON REEL
P5
E0
PW
TYPE
TCR
TOL.
(5000 UNITS)
(10 000 UNITS)
(20 000 UNITS)
1 %
0.5 %
0.5 %
-
-
275 1....
-
-
50 ppm/K
-
275 5....
MCS 0402
25 ppm/K
Jumper
-
276 5....
-
-
275 90001
-
1 %
0.5 %
0.5 %
-
215 1....
215 5....
216 5....
215 90001
255 5....
256 5....
255 90001
-
-
-
-
-
-
-
205 1..
205 5....
206 5....
205 90001
245 5....
246 5....
245 90001
50 ppm/K
MCT 0603
MCU 0805
25 ppm/K
Jumper
50 ppm/K
25 ppm/K
Jumper
0.5 %
0.5 %
-
Revision: 24-Jan-13
Document Number: 28705
11
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明