MDP14032M00GD04 [VISHAY]
RESISTOR, NETWORK, FILM, ISOLATED, 1.73 W, THROUGH HOLE MOUNT, DIP;型号: | MDP14032M00GD04 |
厂家: | VISHAY |
描述: | RESISTOR, NETWORK, FILM, ISOLATED, 1.73 W, THROUGH HOLE MOUNT, DIP 电阻器 |
文件: | 总5页 (文件大小:110K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MDP 01, 03, 05
www.vishay.com
Vishay Dale
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
FEATURES
• Isolated, bussed, and dual terminator schematics
available
Available
• 0.160" (4.06 mm) maximum seated height and
rugged, molded case construction
• Thick film resistive elements
• Low temperature coefficient (-55 °C to +125 °C)
100 ppm/°C
• Reduces total assembly costs
• Compatible with automatic inserting equipment
Available
• Wide resistance range (10
• Uniform performance characteristics
• Available in tube pack
to 2.2 M)
• Material categorization: For definitions of compliance please
see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts
with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details.
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL/
NO. OF
PINS
POWER RATING
ELEMENT (1)
P70 °C
TEMPERATURE
COEFFICIENT
(-55 °C to +125 °C)
ꢁꢁm/°C
TCR
RESISTANCE
RANGE
TOLERANCE (3)
ꢀ
TRACKING (2)
(-55 °C to +125 °C)
ꢁꢁm/°C
WEIGHT
g
SCHEMATIC
W
01
03
05
01
03
05
0.125
0.250
0.125
0.125
0.250
0.125
10 to 2.2M
10 to 2.2M
Consult factory
10 to 2.2M
10 to 2.2M
Consult factory
50
50
100
50
50
MDP 14
1, 2, 5
1, 2, 5
100
1.3
1.5
MDP 16
100
100
Notes
(1)
(2)
(3)
For resistor power ratings at +25 °C see derating curves
Tighter tracking available
2 ꢀ standard, 1 ꢀ, and 5 ꢀ available
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MDP1403100RGD04 (ꢁreferred ꢁart numbering format)
M
D
P
1
4
0
3
1
0
0
R
G
D
0
4
GLOBAL
MODEL
RESISTANCE
VALUE
TOLERANCE
CODE
PIN COUNT
SCHEMATIC
PACKAGING
SPECIAL
MDP
14 = 14 pin
16 = 16 pin
01 = Bussed
03 = Isolated
00 = Special
E04 = Lead (Pb)-free, tube Blank = Standard
R =
K = k
F = 1 ꢀ
G = 2 ꢀ
J = 5 ꢀ
S = Special
(Dash Number)
D04 = Tin/lead, tube
(up to 3 digits)
From 1 to 999
as applicable
M = M
10R0 = 10
680K = 680 k
Z = 0 Jumper
1M00 = 1.0 M
0000 = 0 Jumper
Historical Part Number Examꢁle: MDP1403101G (will continue to be acceꢁted)
MDP
14
03
101
G
D04
HISTORICAL MODEL
PIN COUNT
SCHEMATIC
RESISTANCE VALUE TOLERANCE CODE
PACKAGING
New Global Part Numbering: MDP1405121CGD04 (ꢁreferred ꢁart numbering format)
M
D
P
1
4
0
5
1
2
1
C
G
D
0
4
GLOBAL
MODEL
RESISTANCE
VALUE
TOLERANCE
CODE
PIN COUNT
SCHEMATIC
PACKAGING
SPECIAL
MDP
14 = 14 pin
16 = 16 pin
05 = Dual
3 digit impedance code,
followed by alpha
modifier (see Impedance
Codes table)
F = 1 ꢀ
G = 2 ꢀ
J = 5 ꢀ
E04 = Lead (Pb)-free, tube Blank = Standard
terminator
(Dash Number)
D04 = Tin/lead, tube
(up to 3 digits)
From 1 to 999
as applicable
Historical Part Number Examꢁle: MDP1405221271G (will continue to be acceꢁted)
MDP 14 05 221
271
G
D04
HISTORICAL MODEL PIN COUNT SCHEMATIC RESISTANCE VALUE 1 RESISTANCE VALUE 2 TOLERANCE CODE PACKAGING
Note
•
For additional information on packaging, refer to the Through-Hole Network Packaging document (www.vishay.com/doc?31542).
Revision: 12-Sep-13
Document Number: 31511
1
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MDP 01, 03, 05
www.vishay.com
Vishay Dale
DIMENSIONS in inches (millimeters)
0.310 0.010
(7.87 0.254)
0.120 0.005
(3.05 0.127)
A
0.010 (0.254)
0.250 0.005
(6.35 0.127)
0.030
(0.762) Typ.
Pin #1
Identification
0.010 + 0.005
- 0.002
(0.254 + 0.127
- 0.051)
0.130 + 0.015
0.075 0.015
(1.90 0.381)
0.018 0.003
(0.457 0.076)
- 0.010
(3.30 + 0.381
- 0.254)
Pin #1
0.290 Min.
0.320 Nom.
0.360 Max.
(7.37 Min.
8.13 Nom.
9.14 Max.)
0.100 0.010
(2.54 0.254)
Non-Accumulative Tol.
"C" Spaces
B
0.010 (0.254)
0.050 0.005
(1.27 0.127)
GLOBAL MODEL
MDP 14
A
B
C
6
0.750 (19.05)
0.850 (21.59)
0.600 (15.24)
0.700 (17.78)
MDP 16
7
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
MDP14
1.73
MDP16
Package Power Rating (Maximum at +70 °C)
Voltage Coefficient of Resistance
Dielectric Strength
W
Veff
VAC
1.92
< 50 ppm typical
200
Insulation Resistance
> 10 000M minimum
-55 to +125
Operating Temperature Range
Storage Temperature Range
°C
°C
-55 to +150
MECHANICAL SPECIFICATIONS
Marking Resistance to Solvents
Permanency testing per MIL-STD-202, method 215
Per MIL-STD-202, method 208E
Molded epoxy
Solderability
Body
Terminals
Weight
Solder plated leads
14 pin = 1.3 g; 16 pin = 1.5 g
IMPEDANCE CODES
CODE
500B
750B
800C
990A
101C
111C
121B
121C
131A
R1 ()
82
R2 ()
130
200
210
260
240
270
390
270
330
CODE
141A
181A
191A
221B
281B
381B
501C
102A
202B
R1 ()
270
330
330
330
560
560
620
1.5K
3K
R2 ()
270
120
130
160
180
180
180
220
220
390
470
680
560
1.2K
2.7K
3.3K
6.2K
Note
For additional impedance codes, refer to the Dual Terminator Impedance Code Table document (www.vishay.com/doc?31530).
•
Revision: 12-Sep-13
Document Number: 31511
2
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MDP 01, 03, 05
www.vishay.com
Vishay Dale
CIRCUIT APPLICATIONS
01 Schematic
13 and 15 resistors with one pin common
The MDPXX01 circuit provides a choice of 13 and 15 nominally equal
resistors, each connected between a common pin (14 and 16) and a
discrete PC board pin. Commonly used in the following applications:
• •
• • • • •
•
• TTL Input Pull-down
• MOS/ROM Pull-up/Pull-down
• Open Collector Pull-up
• “Wired OR” Pull-up
• Digital Pulse Squaring
• TTL Unused Gate Pull-up
• High Speed Parallel Pull-up
MDP1401
MDP1601
Pin #1
• Power Driven Pull-up
03 Schematic
7 or 8 isolated resistors
The MDPXX03 provides a choice of 7 and 8 nominally equal resistors,
each resistor isolated from all others and wired directly across.
Commonly used in the following applications:
• Long-line Impedance Balancing
• LED Current Limiting
• ECL Output Pull-down
• TTL Input Pull-down
• “Wired OR” Pull-up
• Power Driven Pull-up
• Powergate Pull-up
• Line Termination
MDP1403
MDP1603
Pin #1
05 Schematic
TTL dual-line terminator; pulse squaring
R1
R1
R1
R1
R1
R1
R1
The MDPXX05 circuit contains 12 and 14 series pair of resistors. Each
series pair is connected between ground and a common line. The
junction of these resistor pairs is connected to the input terminals. The
05 circuits are designed for TTL dual-line termination and pulse
squaring.
R2
R2
R2
R2
R2 R2
R1
R2
R1
R2
R1
R1
R1
R1
R2
R1
R2
R2
R2
R2
R2
MDP1405, MDP1605
Pin #1
Note
Standard E24 resistance values stocked. Consult factory.
•
DERATING
16 Pin Package
14 Pin Package
3.00
2.70
Single Resistor
03
0.380
0.190
01 and 05
- 50
+ 25
+ 70
+ 125 + 150
Ambient Temperature °C
Revision: 12-Sep-13
Document Number: 31511
3
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MDP 01, 03, 05
www.vishay.com
Vishay Dale
PERFORMANCE
MAX. R
(TYPICAL TEST LOTS)
TEST
CONDITIONS
1.5 rated power, applied 1.5 h “ON” and 0.5 h “OFF” for 100 h
4 h at +25 °C ambient temperature
Power Conditioning
Thermal Shock
0.50 ꢀ R
0.50 ꢀ R
0.25 ꢀ R
0.25 ꢀ R
0.50 ꢀ R
0.25 ꢀ R
0.25 ꢀ R
0.25 ꢀ R
1.00 ꢀ R
0.25 ꢀ R
-
5 cycles between -65 °C and +125 °C
2.5 x rated working voltage 5 s
Short Time Overload
Low Temperature Operation
Moisture Resistance
Resistance to Soldering Heat
Shock
45 min at full rated working voltage at -65 °C
240 h with humidity ranging from 80 ꢀ RH to 98 ꢀ RH
Leads immersed in +350 °C solder to within 1/16" of device body for 3 s
Total of 18 shocks at 100 g’s
Vibration
12 h at maximum of 20 g’s between 10 Hz and 2000 Hz
1000 h at +70 °C, rated power applied 1.5 h “ON,
0.5 h “OFF” for full 1000 h period. Derated according to the curve.
Load Life
Terminal Strength
Insulation Resistance
Dielectric Withstanding Voltage
4.5 pound pull for 30 s
10 000 M (minimum)
No evidence of arcing or damage (200 VRMS for 1 min)
-
Revision: 12-Sep-13
Document Number: 31511
4
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号:
MDP1403300KGE04
RESISTOR, NETWORK, FILM, ISOLATED, 1.73 W, THROUGH HOLE MOUNT, DIP, ROHS COMPLIANT
VISHAY
MDP1403300RJE04
RESISTOR, NETWORK, FILM, ISOLATED, 1.73 W, THROUGH HOLE MOUNT, DIP, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明