MKP385E1471AJIM2W0
更新时间：2024-10-29 22:21:56
品牌：VISHAY
描述：THB AC and Pulse Metallized Polypropylene Film Capacitors High Temperature AEC-Q200 Qualified
概述
数据手册MKP385E1471AJIM2W0 概述
THB AC and Pulse Metallized Polypropylene Film Capacitors High Temperature AEC-Q200 Qualified
MKP385E1471AJIM2W0 数据手册
通过下载MKP385E1471AJIM2W0数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MKP385e
Vishay BCcomponents
www.vishay.com
THB AC and Pulse Metallized Polypropylene Film Capacitors
High Temperature AEC-Q200 Qualified
FEATURES
• AEC-Q200 qualified (rev. D)
• THB 60 °C 93 % RH for 56 days at rated voltage
• High temperature capabilities, up to 125 °C
• Customization on request
• Material categorization:
for
definitions
of
compliance
please
see
www.vishay.com/doc?99912
APPLICATIONS
Hybrid and electrical vehicles applications
• On-board and inductive charging systems
• BMS (battery management)
• High pulse and high frequency currents
• Snubbering
• Resonant converters
QUICK REFERENCE DATA
Rated capacitance range (E12 series)
Capacitance tolerance
Rated voltage range, URDC
Permissible AC voltage
Climatic testing class
Rated temperature
0.001 μF to 15 μF
5 % / 10 %
400 VDC, 630 VDC, 850 VDC, 1000 VDC, 1250 VDC, 1600 VDC, 2000 VDC, 2500 VDC
200 VAC, 220 VAC, 300 VAC, 350 VAC, 450 VAC, 550 VAC, 700 VAC, 900 VAC
40 / 105 / 56
85 °C
Max. operation temperature
Reference standards
105 °C up to 125 °C observing voltage derating
IEC 60384-17, AEC-Q200 qualified (rev. D) up to 105 °C
Polypropylene film
Dielectric
Electrodes
Metallized
Mono construction (for 630 VDC
)
Series construction (for > 630 VDC)
Construction
Encapsulation
Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0
Tinned wire
Leads
Withstanding DC voltage between terminals (1)
1.6 URDC for 60 s (maximum rise time 1000 V/s; cut off current 10 mA)
1.4 URAC + 2000 VDC for 60 s
Test voltage between terminals and case
RC between leads, after 1 min:
for URDC < 500 V measuring voltage 100 V
for URDC 500 V measuring voltage 500 V
> 100 G for C 0.33 ꢀF
Insulation resistance
Marking
> 30 000 s for C > 0.33 ꢀF
C-value, tolerance, rated voltage, code for dielectric material,
manufacturer location, manufacturer’s type, manufacturer’s logo, year and week
Notes
•
(1)
For more detailed data and test requirements, contact dc-film@vishay.com
See document “Voltage Proof Test for Metalized Capacitors” www.vishay.com/doc?28169
Revision: 28-May-2019
Document Number: 28255
1
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
VOLTAGE RATINGS AND TEMPERATURE
VOLTAGE RATINGS Tamb = 85 °C
Rated DC voltage URDC
400
200
560
640
250
630
220
850
300
1000
350
1250
450
1600
550
2000
2500
800
Rated AC voltage URAC
700 (1)
Rated peak to peak voltage Vp-p (2 x URAC x 2)
Peak voltage Vo-p (URDC x 1.6)
620
850
1000
1600
438
1250
2000
563
1600 2000 (1) 2250
1008
275
1360
375
2560
688
3200
875
4000
1000
Maximum temporary RMS over voltage (< 24 h) (1.25 x URAC
VOLTAGE RATINGS 85 °C < Tamb 105 °C
UOPDC (URDC x 0.7)
)
280
140
396
440
175
441
154
436
693
193
595
210
594
935
263
700
245
693
1100
306
875
315
891
1375
394
1120
385
1400
1750
560
UOPAC (URAC x 0.7)
490 (2)
Rated peak to peak voltage Vp-p (2 x UOPAC x 2)
Peak voltage Vo-p (URDC x 1.1)
1089 1386 (2) 1584
1760
481
2200
2750
700
Maximum temporary RMS over voltage (< 24 h) (0.875 x URAC
)
613 (2)
VOLTAGE RATINGS 105 °C < Tamb 125 °C (for limited time < 500 h)
UOPDC (URDC x 0.5)
200
100
283
320
125
315
110
311
504
138
425
150
424
680
188
500
175
495
800
219
625
225
636
1000
281
800
275
778
1280
344
1000
350 (3)
990 (3)
1600
1250
400
UOPAC (URAC x 0.5)
Rated peak to peak voltage Vp-p (2 x UOPAC x 2)
Peak voltage Vo-p (URDC x 0.8)
1131
2000
500
Maximum temporary RMS over voltage (< 24 h) (0.625 x URAC
)
438 (3)
Notes
(1)
Rated AC voltage is 600 VAC and rated peak to peak voltage is 1700 VAC for pitch 37.5 mm
UOPAC (URAC x 0.7) = 420 VAC; peak to peak voltage Vp-p (2 x UOPAC x 2) = 1188 V; maximum temporary RMS over voltage (< 24 h)
(2)
(0.875 x URAC) = 525 VAC
(3)
(UOPAC (URAC x 0.5) = 300 VAC; Peak to peak voltage Vp-p (2 x UOPAC x 2) = 849 V; maximum temporary RMS over voltage (< 24 h)
(0.625 x URAC) = 375 VAC
Revision: 28-May-2019
Document Number: 28255
2
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
COMPOSITION OF CATALOG NUMBER
Example for C-Code
2
3
4
5
6
10
10
10
10
1 nF
10 nF
0.001 μF
0.01 μF
0.1 μF
Voltage (VDC
)
P1 (mm)
Pitch Code
100 nF
1000 nF
40 = 400
63 = 630
15
F
I
1.0 μF
22.5
27.5
37.5
52.5
10 10 000 nF
10.0 μF
85 = 850
K
P
Y
10 = 1000
12 = 1250
1A = 1600
2A = 2000
2B = 2500
Multiplier (nF)
0.01
0.1
1
1
2
3
4
5
6
Special Code for Terminal
2
4
2 pins
4 pins P2 = 10.2 mm
4 pins P2 = 20.3 mm
Customized
10
Capacitance Code
100
1000
5
(numerically)
(#)
1 2 3 4 5 6 7
M K P 3 8 5 e
8
1
9 10
11 12
13
14
15
[1]
16
2
17
[2]
18
0
4
7
2
A
K
F
Type
Tolerance
Special
J
K
A
5 %
0 = standard
10 %
Other = special
Special tolerance
It (mm)
Lead Length Code
Pitch (mm)
Packing Code
Packing Style
Bulk/loose (1)
Remark
3.5 0.3
P
All
All
B/T
W
Excluding bent back
Tape and reel (H: 18.5 mm; 500 mm) Pitch 15 mm to 22.5 mm
5
1
M
25
2
I
≤ 27.5
0: space holder
Notes
•
(1)
For detailed tape specifications refer to packaging information www.vishay.com/doc?28139
Capacitors with short leads up to 5 mm and pitch > 15 mm will be in tray and asking code will be “T”
DIMENSIONS in millimeters
I
w
l
l
w
w
Marking
h
h
h'
h
F'
lt
(1)
Ø dt
F
6 -2
Ø dt
H
P
Ø dt
10
P1 0.5
P2 0.5
15
CBB511
Note
(1)
| F-F' | < 0.3 mm
F = 7.5 mm + 0.6 mm / - 0.1 mm
Ø dt = 0.80 mm 10 % for P < 37.5 mm and Ø dt = 0.95 mm 10 % for P 37.5 mm
Revision: 28-May-2019
Document Number: 28255
3
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
ELECTRICAL DATA AND ORDERING CODE
(1)
IRMS
(A)
ESR (2)
tan (3)
DIMENSION
ORDERING CODE (4)
MKP385e....
(m)
(10-4)
URDC CAP.
P1
P2
du/dt IPEAK
(V/μs)R (A)
w x h x l
(mm)
(V)
(μF)
(mm)
(mm)
2
4
2
4
2
4
PINS PINS PINS PINS PINS PINS
URAC = 200 V, Up-p = 560 V, C-TOL. = 10 %
0.047
0.056
0.068
0.082
0.10
5.4
1.6
1.8
1.9
1.9
2.1
2.3
2.8
3.0
2.6
3.1
3.4
3.9
4.4
2.7
3.0
3.6
3.9
4.5
4.3
5.2
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
78
66
54
58
47
39
32
26
36
29
24
20
17
36
29
24
20
17
19
15
14
12
10
22
19
15
14
9
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
5
5
5
5
5
35
35
-
34740KF[1]2[2]0
35640KF[1]2[2]0
36840KF[1]2[2]0
38240KF[1]2[2]0
41040KF[1]2[2]0
41240KF[1]2[2]0
41540KF[1]2[2]0
41840KF[1]2[2]0
42240KF[1]2[2]0
42740KF[1]2[2]0
43340KF[1]2[2]0
43940KF[1]2[2]0
44740KF[1]2[2]0
42240KI[1]2[2]0
42740KI[1]2[2]0
43340KI[1]2[2]0
43940KI[1]2[2]0
44740KI[1]2[2]0
45640KI[1]2[2]0
46840KI[1]2[2]0
48240KI[1]2[2]0
51040KI[1]2[2]0
51240KI[1]2[2]0
44740KK[1]2[2]0
45640KK[1]2[2]0
46840KK[1]2[2]0
48240KK[1]2[2]0
51040KK[1]2[2]0
51240KK[1]2[2]0
51540KK[1]2[2]0
51840KK[1]2[2]0
52240KK[1]2[2]0
52740KK[1]2[2]0
53340KK[1]2[2]0
53940KK[1]2[2]0
53340KP[1]2T0
53940KP[1]2T0
54740KP[1]2T0
55640KP[1]2T0
56840KP[1]4T0
58240KP[1]4T0
61040KP[1]4T0
61240KP[1]5T0
61540KP[1]5T0
6.4
-
7.8
35
-
7.0 x 13.5 x 17.5
9.4
45
-
11.5
13.8
17.3
20.7
25.3
31.1
38.0
44.9
54.1
28.6
35.1
42.9
50.7
61.1
72.8
88.4
45
-
0.12
45
-
0.15
15
-
115
45
-
0.18
8.5 x 15.0 x 17.5
10.0 x 16.5 x 17.5
45
-
0.22
75
-
0.27
75
-
0.33
75
-
0.39 10.5 x 17.5 x 18.0
0.47 11.0 x 18.5 x 18.0
75
-
75
-
0.22
75
-
7.0 x 16.5 x 26.0
0.27
75
-
0.33
75
-
8.5 x 18.0 x 26.0
0.39
75
-
0.47
75
-
10.0 x 19.5 x 26.0 22.5
-
130
0.56
0.68
100
100
110
110
110
100
100
100
110
110
110
110
125
125
140
160
160
190
200
225
245
285
325
390
465
595
-
-
0.82 12.0 x 22.0 x 26.0
1.00
106.6 5.4
130.0 6.0
156.0 6.7
-
400
-
1.20 12.5 x 22.5 x 26.5
-
0.47
37.6
44.8
54.4
65.6
80.0
96.0
3.7
4.1
4.9
5.1
6.2
6.6
-
9.0 x 19.0 x 31.0
0.56
-
0.68
-
0.82 11.0 x 21.0 x 31.0
-
1.0
1.2
-
10
8
-
13.0 x 23.0 x 31.0 27.5
-
80
1.5
1.8
2.2
2.7
3.3
3.9
3.3
3.9
4.7
5.6
6.8
8.2
10
120.0 7.4
144.0 8.1
176.0 9.8
216.0 10.3
264.0 11.5
312.0 12.6
148.5 9.8
175.5 10.2
211.5 11.6
252.0 12.0
-
15.0 x 25.0 x 31.0
18.0 x 28.0 x 31.0
7
-
6
-
5
-
-
5
21.0 x 31.0 x 31.0
15.7 x 28.5 x 41.5
18.0 x 32.5 x 41.5
4
-
7
-
7
-
-
6
-
6
-
37.5
45
306.0 14.0 14.7
369.0 14.2 15.0
450.0 15.4 16.2
540.0 16.6 17.4
675.0 16.4 17.2
5
260
295
355
420
540
21.5 x 38.5 x 43.0
24.0 x 44.0 x 42.0
30.0 x 45.0 x 42.0
10.2
20.3
5
5
12
5
15
5
Notes
(1)
IRMS at 85 °C ambient temperature and 100 kHz
ESR at 85 °C and 100 kHz
Maximum tan value at 100 kHz
Please replace “[1]” by the lead length code and the “[2]” by the packaging type in accordance with section “Composition of Catalog
Number”
(2)
(3)
(4)
Revision: 28-May-2019
Document Number: 28255
4
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
ELECTRICAL DATA AND ORDERING CODE
(1)
IRMS
(A)
ESR (2)
tan (3)
DIMENSION
ORDERING CODE (4)
MKP385e....
(m)
(10-4)
URDC CAP.
P1
P2
du/dt IPEAK
(V/μs)R (A)
w x h x l
(mm)
(V)
(μF)
(mm)
(mm)
2
4
2
4
2
4
PINS PINS PINS PINS PINS PINS
URAC = 220 V, Up-p = 620 V, C-TOL. = 10 %
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
3.5
1.3
1.5
1.6
1.7
1.8
1.9
2.1
2.3
2.5
3.0
3.3
2.9
3.4
2.6
2.9
3.4
2.9
3.4
3.8
4.5
5.0
4.7
3.3
3.6
4.3
4.7
4.4
5.2
5.5
6.5
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
117
95
81
67
66
54
58
47
39
32
26
36
29
39
32
26
36
29
24
20
17
19
29
24
20
17
19
15
14
12
10
8
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
7
7
7
7
6
6
7
30
30
-
32763KF[1]2[2]0
33363KF[1]2[2]0
33963KF[1]2[2]0
34763KF[1]2[2]0
35663KF[1]2[2]0
36863KF[1]2[2]0
38263KF[1]2[2]0
41063KF[1]2[2]0
41263KF[1]2[2]0
41563KF[1]2[2]0
41863KF[1]2[2]0
42263KF[1]2[2]0
42763KF[1]2[2]0
41263KI[1]2[2]0
41563KI[1]2[2]0
41863KI[1]2[2]0
42263KI[1]2[2]0
42763KI[1]2[2]0
43363KI[1]2[2]0
43963KI[1]2[2]0
44763KI[1]2[2]0
45663KI[1]2[2]0
42763KK[1]2[2]0
43363KK[1]2[2]0
43963KK[1]2[2]0
44763KK[1]2[2]0
45663KK[1]2[2]0
46863KK[1]2[2]0
48263KK[1]2[2]0
51063KK[1]2[2]0
51263KK[1]2[2]0
51563KK[1]2[2]0
51863KK[1]2[2]0
52263KK[1]2[2]0
52763KP[1]2T0
53363KP[1]4T0
53963KP[1]4T0
54763KP[1]4T0
55663KP[1]4T0
56863KP[1]5T0
58263KP[1]5T0
61563KY[1]5T0
4.3
-
5.1
30
-
7.0 x 13.5 x 17.5
6.1
30
-
7.3
35
-
8.8
35
-
15
-
130
10.7
13.0
15.6
19.5
23.4
28.6
35.1
18.0
22.5
27.0
33.0
40.5
49.5
58.5
70.5
84.0
24.3
29.7
35.1
42.3
50.4
61.2
73.8
90.0
45
-
8.5 x 15.0 x 17.5
10.0 x 16.5 x 17.5
45
-
0.12
45
-
0.15
45
-
0.18
45
-
0.22 10.5 x 17.5 x 18.0
0.27 11.0 x 18.5 x 18.0
75
-
75
-
0.12
45
-
7.0 x 16.5 x 26.0
0.15
45
-
0.18
45
-
8.5 x 18.0 x 26.0
0.22
75
-
0.27
22.5
-
150
75
-
10.0 x 19.5 x 26.0
0.33
75
-
0.39
75
-
630
0.47 12.0 x 22.0 x 26.0
0.56
75
-
100
75
-
0.27
-
9.0 x 19.0 x 31.0
0.33
75
-
0.39
75
-
0.47 11.0 x 21.0 x 31.0
75
-
-
0.56
0.68
100
100
110
110
110
110
125
125
150
190
225
270
305
340
365
840
-
13.0 x 23.0 x 31.0 27.5
15.0 x 25.0 x 31.0
-
90
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
15
-
-
108.0 7.8
135.0 8.7
162.0 9.6
198.0 10.7
135.0 10.7
-
18.0 x 28.0 x 31.0
-
7
-
21.0 x 31.0 x 31.0
6
-
18 x 32.5 x 41.5
18.5 x 35.5 x 43
-
7
-
165.0 11.1 11.7
195.0 11.8 12.4
235.0 11.9 12.5
280.0 13.0 13.7
340.0 14.6 15.3
410.0 15.5 16.3
375.0 16.8 17.6
7
175
205
245
275
310
330
760
7
21.5 x 38.5 x 43
37.5
10.2
50
25
7
24 x 44 x 42
7
6
30 x 45 x 42
20.3
6
35 x 50 x 57.5
52.5
7
Notes
(1)
IRMS at 85 °C ambient temperature and 100 kHz
ESR at 85 °C and 100 kHz
Maximum tan value at 100 kHz
Please replace “[1]” by the lead length code and the “[2]” by the packaging type in accordance with section “Composition of Catalog
Number”
(2)
(3)
(4)
Revision: 28-May-2019
Document Number: 28255
5
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
ELECTRICAL DATA AND ORDERING CODE
(1)
IRMS
(A)
ESR (2)
tan (3)
DIMENSION
ORDERING CODE (4)
MKP385e....
(m)
(10-4)
URDC CAP.
P1
P2
du/dt IPEAK
(V/μs)R (A)
w x h x l
(mm)
(V)
(μF)
(mm)
(mm)
2
4
2
4
2
4
PINS PINS PINS PINS PINS PINS
U
RAC = 300 V, Up-p = 850 V, C-TOL. = 10 %
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
5.9
7.1
8.9
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.9
1.9
2.1
2.2
2.4
2.8
1.7
1.8
2.0
2.1
2.4
2.3
2.5
2.8
3.3
3.6
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
315
263
210
175
143
117
95
81
67
66
54
58
47
39
95
81
67
66
54
58
47
39
32
26
36
29
24
47
39
32
26
36
29
24
20
17
19
15
14
12
10
6
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
6
6
5
5
5
30
30
30
30
30
30
30
30
30
35
35
45
45
45
30
30
30
35
35
45
45
45
45
45
75
75
75
45
45
45
45
75
75
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
31085KF[1]2[2]0
31285KF[1]2[2]0
31585KF[1]2[2]0
31885KF[1]2[2]0
32285KF[1]2[2]0
32785KF[1]2[2]0
33385KF[1]2[2]0
33985KF[1]2[2]0
34785KF[1]2[2]0
35685KF[1]2[2]0
36885KF[1]2[2]0
38285KF[1]2[2]0
41085KF[1]2[2]0
41285KF[1]2[2]0
33385KI[1]2[2]0
33985KI[1]2[2]0
34785KI[1]2[2]0
35685KI[1]2[2]0
36885KI[1]2[2]0
38285KI[1]2[2]0
41085KI[1]2[2]0
41285KI[1]2[2]0
41585KI[1]2[2]0
41885KI[1]2[2]0
42285KI[1]2[2]0
42785KI[1]2[2]0
43385KI[1]2[2]0
41085KK[1]2[2]0
41285KK[1]2[2]0
41585KK[1]2[2]0
41885KK[1]2[2]0
42285KK[1]2[2]0
42785KK[1]2[2]0
43385KK[1]2[2]0
43985KK[1]2[2]0
44785KK[1]2[2]0
45685KK[1]2[2]0
46885KK[1]2[2]0
48285KK[1]2[2]0
51085KK[1]2[2]0
51285KK[1]2[2]0
51585KP[1]2T0
51785KP[1]2T0
51885KP[1]2T0
52285KP[1]4T0
52785KP[1]4T0
53385KP[1]4T0
53985KP[1]4T0
54785KP[1]5T0
10.6
13.0
15.9
19.5
23.0
27.7
33.0
40.1
48.4
59.0
70.8
17.5
20.7
24.9
29.7
36.0
43.5
53.0
63.6
79.5
95.4
116.6 3.4
143.1 3.8
174.9 4.2
33.0
39.6
49.5
59.4
72.6
89.1
108.9 3.9
128.7 4.6
155.1 5.0
184.8 5.1
224.4 5.6
270.6 6.4
330.0 7.7
396.0 8.4
225.0 10.4
255.0 11.5
270.0 11.5
330.0 12.4 13.0
405.0 13.5 14.2
495.0 14.8 15.5
585.0 15.1 15.8
705.0 16.5 17.4
7.0 x 13.5 x 17.5
15
-
590
0.056 8.5 x 15.0 x 17.5
0.068
0.082
10.0 x 16.5 x 17.5
0.10
0.12 10.5 x 17.5 x 18.0
0.033
0.039 7.0 x 16.5 x 26.0
0.047
0.056
0.068
0.082 8.5 x 18.0 x 26.0
0.10
0.12
0.15
0.18
22.5
-
530
10.0 x 19.5 x 26.0
850
0.22
0.27 12.0 x 22.0 x 26.0
0.33
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
9.0 x 19.0 x 31.0
2.6
3.1
3.4
3.7
3.2
3.5
11.0 x 21.0 x 31.0
-
-
-
-
-
-
-
-
-
75
75
75
100
100
110
110
110
75
27.5
-
330
13.0 x 23.0 x 31.0
15.0 x 25.0 x 31.0
0.82 18.0 x 28.0 x 31.0
1.0
1.2
21.0 x 31.0 x 31.0
1.5
1.7
1.8
2.2
2.7
3.3
3.9
4.7
15.7 x 28.5 x 41.5
18 x 32.5 x 41.5
-
-
-
-
6
6
6
6
5
5
5
85
90
18.5 x 35.5 x 43
21.5 x 38.5 x 43
105
120
140
160
185
95
110
130
145
170
37.5
150
10.2
20.3
24 x 44 x 42
30 x 45 x 42
Notes
(1)
IRMS at 85 °C ambient temperature and 100 kHz
ESR at 85 °C and 100 kHz
Maximum tan value at 100 kHz
Please replace “[1]” by the lead length code and the “[2]” by the packaging type in accordance with section “Composition of Catalog
Number”
(2)
(3)
(4)
Revision: 28-May-2019
Document Number: 28255
6
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
ELECTRICAL DATA AND ORDERING CODE
(1)
IRMS
(A)
ESR (2)
tan (3)
DIMENSION
ORDERING CODE (4)
MKP385e....
(m)
(10-4)
URDC CAP.
P1
P2
du/dt IPEAK
(V/μs)R (A)
w x h x l
(mm)
(V)
(μF)
(mm)
(mm)
2
4
2
4
2
4
PINS PINS PINS PINS PINS PINS
U
RAC = 350 V, Up-p = 1000 V, C-TOL. = 10 %
0.018
10.6
13.0
15.9
19.5
23.0
27.7
33.0
40.1
48.4
29.7
36.0
43.5
53.0
63.6
79.5
95.4
1.1
1.2
1.3
1.6
1.7
1.9
2.1
2.3
2.3
2.0
2.4
2.3
2.7
3.0
3.6
4.0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
175
143
117
95
81
67
66
54
58
66
54
58
47
39
32
26
36
47
39
32
26
36
29
24
20
17
19
15
14
7
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
6
6
5
5
5
30
30
30
30
30
30
35
35
45
35
35
45
45
45
45
45
75
45
45
45
45
75
75
75
75
75
100
100
110
60
65
75
80
90
105
120
-
-
31810KF[1]2[2]0
32210KF[1]2[2]0
32710KF[1]2[2]0
33310KF[1]2[2]0
33910KF[1]2[2]0
34710KF[1]2[2]0
35610KF[1]2[2]0
36810KF[1]2[2]0
38210KF[1]2[2]0
35610KI[1]2[2]0
36810KI[1]2[2]0
38210KI[1]2[2]0
41010KI[1]2[2]0
41210KI[1]2[2]0
41510KI[1]2[2]0
41810KI[1]2[2]0
42210KI[1]2[2]0
41010KK[1]2[2]0
41210KK[1]2[2]0
41510KK[1]2[2]0
41810KK[1]2[2]0
42210KK[1]2[2]0
42710KK[1]2[2]0
43310KK[1]2[2]0
43910KK[1]2[2]0
44710KK[1]2[2]0
45610KK[1]2[2]0
46810KK[1]2[2]0
48210KK[1]2[2]0
51010KP[1]2T0
51210KP[1]2T0
51510KP[1]4T0
51810KP[1]4T0
52210KP[1]4T0
52710KP[1]4T0
53310KP[1]5T0
0.022 7.0 x 13.5 x 17.5
0.027
-
0.033
-
0.039 8.5 x 15.0 x 17.5
0.047
15
-
590
-
-
0.056
-
10.0 x 16.5 x 17.5
0.068
-
0.082 10.5 x 17.5 x 18.0
0.056 7.0 x 16.5 x 26.0
-
-
0.068
-
8.5 x 18.0 x 26.0
0.082
-
0.10
-
10.0 x 19.5 x 26.0 22.5
-
530
0.12
0.15
-
-
0.18 12.0 x 22.0 x 26.0
0.22
-
116.6 3.4
-
1000
0.10
33.0
39.6
49.5
59.4
72.6
89.1
2.6
2.8
3.4
3.7
3.2
3.8
-
9.0 x 19.0 x 31.0
0.12
-
0.15
-
0.18 11.0 x 21.0 x 31.0
-
0.22
0.27
-
-
13.0 x 23.0 x 31.0 27.5
-
330
0.33
0.39
0.47
108.9 4.2
128.7 4.9
155.1 5.4
184.8 5.6
224.4 5.1
270.6 5.3
180.0 9.6
216.0 10.9
-
-
15.0 x 25.0 x 31.0
-
0.56 18.0 x 28.0 x 31.0
-
0.68
-
21.0 x 31.0 x 31.0
0.82
-
1.0
1.2
1.5
1.8
2.2
2.7
3.3
15.7 x 28.5 x 41.5
18 x 32.5 x 41.5
18.5 x 35.5 x 43
21.5 x 38.5 x 43
-
-
7
-
270.0 12.2 12.8
324.0 13.5 14.2
396.0 15.1 15.8
486.0 15.6 16.4
594.0 17.1 18.0
6
70
75
85
95
110
37.5
180
6
10.2
20.3
5
24 x 44 x 42
30 x 45 x 42
5
5
Notes
(1)
IRMS at 85 °C ambient temperature and 100 kHz
ESR at 85 °C and 100 kHz
Maximum tan value at 100 kHz
Please replace “[1]” by the lead length code and the “[2]” by the packaging type in accordance with section “Composition of Catalog
Number”
(2)
(3)
(4)
Revision: 28-May-2019
Document Number: 28255
7
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
ELECTRICAL DATA AND ORDERING CODE
(1)
IRMS
(A)
ESR (2)
tan (3)
DIMENSION
ORDERING CODE (4)
MKP385e....
(m)
(10-4)
URDC CAP.
P1
P2
du/dt IPEAK
(V/μs)R (A)
w x h x l
(mm)
(V)
(μF)
(mm)
(mm)
2
4
2
4
2
4
PINS PINS PINS PINS PINS PINS
URAC = 450 V, Up-p = 1250 V, C-TOL. = 10 %
0.0082
0.010
5.5
0.8
0.9
1.0
1.1
1.2
1.4
1.4
1.6
1.9
2.1
2.2
2.5
2.1
2.1
2.4
2.5
2.7
3.2
3.6
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
320
263
219
175
146
119
117
95
81
67
66
54
67
66
54
58
47
39
32
26
47
39
32
26
36
29
24
20
17
19
5
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
6
6
6
5
5
25
25
25
25
25
25
30
30
30
30
35
35
30
35
35
45
45
45
45
45
45
45
45
45
75
75
75
75
75
100
30
45
60
75
85
85
100
-
-
28212KF[1]2[2]0
31012KF[1]2[2]0
31212KF[1]2[2]0
31512KF[1]2[2]0
31812KF[1]2[2]0
32212KF[1]2[2]0
32712KF[1]2[2]0
33312KF[1]2[2]0
33912KF[1]2[2]0
34712KF[1]2[2]0
35612KF[1]2[2]0
36812KF[1]2[2]0
34712KI[1]2[2]0
35612KI[1]2[2]0
36812KI[1]2[2]0
38212KI[1]2[2]0
41012KI[1]2[2]0
41212KI[1]2[2]0
41512KI[1]2[2]0
41812KI[1]2[2]0
41012KK[1]2[2]0
41212KK[1]2[2]0
41512KK[1]2[2]0
41812KK[1]2[2]0
42212KK[1]2[2]0
42712KK[1]2[2]0
43312KK[1]2[2]0
43912KK[1]2[2]0
44712KK[1]2[2]0
45612KK[1]2[2]0
48212KP[1]2T0
51012KP[1]2T0
51212KP[1]4T0
51512KP[1]4T0
51812KP[1]4T0
52212KP[1]5T0
52712KP[1]5T0
6.7
0.012 7.0 x 13.5 x 17.5
8.0
-
0.015
10.1
12.1
14.7
18.1
22.1
26.1
31.5
37.5
45.6
28.2
33.6
40.8
49.2
60.0
72.0
90.0
-
0.018
-
0.022
-
15
-
670
0.027 8.5 x 15.0 x 17.5
0.033
-
-
0.039
-
10.0 x 16.5 x 17.5
0.047
-
0.056 10.5 x 17.5 x 18.0
0.068 11.0 x 18.5 x 18.0
0.047
-
-
-
0.056 8.5 x 18.0 x 26.0
0.068
-
-
0.082
-
10.0 x 19.5 x 26.0 22.5
12.0 x 22.0 x 26.0
-
600
0.10
0.12
0.15
-
-
1250
-
0.18 12.5 x 22.5 x 26.5
108.0 4.1
-
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
9.0 x 19.0 x 31.0
37.0
44.4
55.5
66.6
81.4
99.9
2.6
3.1
3.4
4.0
3.4
4.1
-
-
11.0 x 21.0 x 31.0
-
-
13.0 x 23.0 x 31.0
15.0 x 25.0 x 31.0
18.0 x 28.0 x 31.0
-
27.5
-
370
-
122.1 4.5
144.3 5.4
173.9 5.9
207.2 6.0
164.0 13.3
200.0 12.1
-
-
-
0.56 21.0 x 31.0 x 31.0
-
0.82
-
18 x 32.5 x 41.5
1.0
-
6
-
1.2
1.5
1.8
2.2
2.7
18.5 x 35.5 x 43
21.5 x 38.5 x 43
24 x 44 x 42
240.0 12.2 12.8
300.0 13.0 13.6
360.0 14.3 15.1
440.0 16.7 17.5
540.0 18.4 19.3
6
55
70
80
80
90
37.5
10.2
20.3
200
6
6
5
30 x 45 x 42
5
Notes
(1)
IRMS at 85 °C ambient temperature and 100 kHz
ESR at 85 °C and 100 kHz
Maximum tan value at 100 kHz
Please replace “[1]” by the lead length code and the “[2]” by the packaging type in accordance with section “Composition of Catalog
Number”
(2)
(3)
(4)
Revision: 28-May-2019
Document Number: 28255
8
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
ELECTRICAL DATA AND ORDERING CODE
(1)
IRMS
(A)
ESR (2)
tan (3)
DIMENSION
ORDERING CODE (4)
MKP385e....
(m)
(10-4)
URDC CAP.
P1
P2
du/dt IPEAK
(V/μs)R (A)
w x h x l
(mm)
(V)
(μF)
(mm)
(mm)
2
4
2
4
2
4
PINS PINS PINS PINS PINS PINS
U
RAC = 550 V, Up-p = 1600 V, C-TOL. = 10 %
0.0039
0.0047
0.0056
7.8
0.6
0.7
0.7
0.8
0.9
0.9
1.0
1.2
1.3
1.6
1.6
1.8
2.0
1.0
1.2
1.3
1.4
1.6
1.6
1.8
1.9
2.3
2.3
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
539
447
375
309
256
263
219
175
146
119
117
95
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
6
5
5
5
5
20
20
20
20
20
25
25
25
25
25
30
30
30
25
25
25
25
25
30
30
30
30
35
35
45
45
45
45
45
45
45
45
75
75
75
25
25
30
35
40
50
-
-
2391AKF[1]2[2]0
2471AKF[1]2[2]0
2561AKF[1]2[2]0
2681AKF[1]2[2]0
2821AKF[1]2[2]0
3101AKF[1]2[2]0
3121AKF[1]2[2]0
3151AKF[1]2[2]0
3181AKF[1]2[2]0
3221AKF[1]2[2]0
3271AKF[1]2[2]0
3331AKF[1]2[2]0
3391AKF[1]2[2]0
3101AKI[1]2[2]0
3121AKI[1]2[2]0
3151AKI[1]2[2]0
3181AKI[1]2[2]0
3221AKI[1]2[2]0
3271AKI[1]2[2]0
3331AKI[1]2[2]0
3391AKI[1]2[2]0
3471AKI[1]2[2]0
3561AKI[1]2[2]0
3681AKI[1]2[2]0
3821AKI[1]2[2]0
4101AKI[1]2[2]0
3681AKK[1]2[2]0
3821AKK[1]2[2]0
4101AKK[1]2[2]0
4121AKK[1]2[2]0
4151AKK[1]2[2]0
4181AKK[1]2[2]0
4221AKK[1]2[2]0
4271AKK[1]2[2]0
4331AKK[1]2[2]0
4471AKP[1]2T0
4561AKP[1]4T0
4681AKP[1]4T0
4821AKP[1]4T0
5101AKP[1]4T0
5121AKP[1]5T0
9.4
11.2
13.6
16.4
20.0
24.0
30.0
36.0
44.0
54.0
66.0
78.0
17.0
20.4
25.5
30.6
37.4
45.9
56.1
66.3
79.9
95.2
-
0.0068 7.0 x 13.5 x 17.5
-
0.0082
0.010
0.012
-
-
15
-
2000
-
0.015
-
8.5 x 15.0 x 17.5
0.018
-
0.022
-
10.0 x 16.5 x 17.5
0.027
-
0.033 10.5 x 17.5 x 18.0
-
0.039 11.0 x 18.5 x 18.0
81
-
0.010 7.0 x 16.5 x 26.0
263
219
175
146
119
117
95
-
0.012
-
0.015
-
0.018
-
0.022 8.5 x 18.0 x 26.0
-
0.027
0.033
0.039
-
22.5
-
1700
-
1600
81
-
0.047
67
-
10.0 x 19.5 x 26.0
0.056
66
-
0.068
115.6 2.8
139.4 2.7
170.0 3.0
54
-
0.082 12.0 x 22.0 x 26.0
58
-
0.10
47
-
0.068
81.6
98.4
2.3
2.5
70
-
0.082 11.0 x 21.0 x 31.0
0.10
58
-
120.0 2.8
144.0 3.3
47
-
0.12 13.0 x 23.0 x 31.0
39
-
0.15
27.5
-
1200 180.0 3.9
216.0 4.3
32
-
15.0 x 25.0 x 31.0
0.18
26
-
0.22
264.0 4.0
36
-
18.0 x 28.0 x 31.0
0.27
324.0 4.5
29
-
0.33 21.0 x 31.0 x 31.0
396.0 5.3
24
-
0.47
0.56
0.68
0.82
1.00
1.20
18 x 32.5 x 41.5
18.5 x 35.5 x 43
21.5 x 38.5 x 43
-
211.5 11.2
6
-
252.0 12.7 13.3
306.0 14.3 15.0
369.0 15.8 16.6
450.0 15.8 16.6
540.0 16.6 17.4
6
25
30
35
40
45
5
37.5
10.2
20.3
450
5
24 x 44 x 42
30 x 45 x 42
5
5
Notes
(1)
IRMS at 85 °C ambient temperature and 100 kHz
ESR at 85 °C and 100 kHz
Maximum tan value at 100 kHz
Please replace “[1]” by the lead length code and the “[2]” by the packaging type in accordance with section “Composition of Catalog
Number”
(2)
(3)
(4)
Revision: 28-May-2019
Document Number: 28255
9
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
ELECTRICAL DATA AND ORDERING CODE
(1)
IRMS
(A)
ESR (2)
tan (3)
DIMENSION
ORDERING CODE (4)
MKP385e....
(m)
(10-4)
URDC CAP.
P1
P2
du/dt IPEAK
(V/μs)R (A)
w x h x l
(mm)
(V)
(μF)
(mm)
(mm)
2
4
2
4
2
4
PINS PINS PINS PINS PINS PINS
U
RAC = 700 V, Up-p = 2000 V, C-TOL. = 10 %
0.0010
0.0012
0.0015
0.0018
0.0022
0.0027
0.0033
0.0039
0.0047
0.0056
0.0068
2.9
3.5
0.3
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.8
0.9
1.0
1.0
1.2
1.3
1.5
1.1
1.1
1.2
1.3
1.5
1.7
1.9
2.3
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
2626
2188
1751
1459
1194
973
796
673
559
469
386
320
263
263
210
175
143
263
263
210
175
143
117
95
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
7
6
6
5
5
25
25
25
25
25
25
25
25
25
25
25
25
25
30
30
30
30
25
30
30
30
30
30
30
30
30
35
30
30
30
30
30
35
35
45
45
45
45
45
20
20
25
25
30
-
-
2102AKF[1]2[2]0
2122AKF[1]2[2]0
2152AKF[1]2[2]0
2182AKF[1]2[2]0
2222AKF[1]2[2]0
2272AKF[1]2[2]0
2332AKF[1]2[2]0
2392AKF[1]2[2]0
2472AKF[1]2[2]0
2562AKF[1]2[2]0
2682AKF[1]2[2]0
2822AKF[1]2[2]0
3102AKF[1]2[2]0
3122AKF[1]2[2]0
3152AKF[1]2[2]0
3182AKF[1]2[2]0
3222AKF[1]2[2]0
3102AKI[1]2[2]0
3122AKI[1]2[2]0
3152AKI[1]2[2]0
3182AKI[1]2[2]0
3222AKI[1]2[2]0
3272AKI[1]2[2]0
3332AKI[1]2[2]0
3392AKI[1]2[2]0
3472AKI[1]2[2]0
3562AKI[1]2[2]0
3222AKK[1]2[2]0
3272AKK[1]2[2]0
3332AKK[1]2[2]0
3392AKK[1]2[2]0
3472AKK[1]2[2]0
3562AKK[1]2[2]0
3682AKK[1]2[2]0
3822AKK[1]2[2]0
4102AKK[1]2[2]0
4122AKK[1]2[2]0
4152AKK[1]2[2]0
4182AKK[1]2[2]0
4332AKP[1]4T0
4392AKP[1]4T0
4472AKP[1]4T0
4562AKP[1]4T0
4682AKP[1]5T0
4.4
-
5.2
-
6.4
-
7.0 x 13.5 x 17.5
7.8
-
9.6
-
11.3
13.6
16.2
19.7
23.8
29.0
34.8
43.5
52.2
63.8
25.0
30.0
37.5
45.0
55.0
67.5
82.5
97.5
-
15
-
2900
-
-
-
0.0082 8.5 x 15.0 x 17.5
0.010
-
-
0.012
-
10.0 x 16.5 x 17.5
0.015
-
0.018 10.5 x 17.5 x 18.0
0.022 11.0 x 18.5 x 18.0
0.010
-
-
-
0.012
-
0.015 8.5 x 18.0 x 26.0
0.018
-
-
2000 0.022
0.027
-
22.5
-
2500
-
10.0 x 19.5 x 26.0
0.033
-
0.039
81
-
0.047 12.0 x 22.0 x 26.0
117.5 2.5
140.0 2.5
67
-
0.056
66
-
0.022
37.4
45.9
56.1
66.3
79.9
95.2
1.6
1.8
2.0
2.1
2.3
2.5
143
117
95
-
0.027
-
0.033 11.0 x 21.0 x 31.0
-
0.039
0.047
0.056
81
-
67
-
66
-
13.0 x 23.0 x 31.0 27.5
15.0 x 25.0 x 31.0
-
1700
0.068
0.082
0.10
115.6 2.8
139.4 2.9
170.0 3.2
204.0 3.8
255.0 4.3
306.0 5.1
54
-
58
-
47
-
0.12
39
-
18.0 x 28.0 x 31.0
0.15
32
-
0.18 21.0 x 31.0 x 31.0
26
-
0.33
0.39
0.47
0.56
0.68
18.5 x 35.5 x 43
21.5 x 38.5 x 43
198.0 11.8 12.4
234.0 13.1 13.7
282.0 14.5 15.3
336.0 15.0 15.7
408.0 16.6 17.4
7
20
20
25
25
30
6
10.2
20.3
37.5
600
6
24 x 44 x 42
30 x 45 x 42
5
5
Notes
(1)
IRMS at 85 °C ambient temperature and 100 kHz
ESR at 85 °C and 100 kHz
Maximum tan value at 100 kHz
Please replace “[1]” by the lead length code and the “[2]” by the packaging type in accordance with section “Composition of Catalog
Number”
(2)
(3)
(4)
Revision: 28-May-2019
Document Number: 28255
10
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
ELECTRICAL DATA AND ORDERING CODE
(1)
IRMS
(A)
ESR (2)
tan (3)
DIMENSION
ORDERING CODE (4)
MKP385e....
(m)
(10-4)
URDC CAP.
P1
P2
du/dt IPEAK
(V/μs)R (A)
w x h x l
(mm)
(V)
(μF)
(mm)
(mm)
2
4
2
4
2
4
PINS PINS PINS PINS PINS PINS
URAC = 800 V, Up-p = 2250 V, C-TOL. = 10 %
0.0010
0.0012
0.0015
0.0018
0.0022
0.0027
0.0033
0.0039
0.0047
0.0056
0.0068
2.5
3.0
0.3
0.3
0.4
0.5
0.5
0.6
0.6
0.7
0.7
0.8
0.9
1.0
1.1
1.3
1.4
1.6
1.3
1.4
1.7
1.9
2.3
2.5
2.9
3.0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
2626
2188
1751
1459
1194
973
796
673
559
469
386
320
263
263
210
175
210
175
143
117
95
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
8
8
6
6
5
5
25
25
25
25
25
25
25
25
25
25
25
25
25
30
30
30
30
30
30
30
30
30
30
35
35
45
10
10
10
15
15
15
15
15
-
-
2102BKI[1]2[2]0
2122BKI[1]2[2]0
2152BKI[1]2[2]0
2182BKI[1]2[2]0
2222BKI[1]2[2]0
2272BKI[1]2[2]0
2332BKI[1]2[2]0
2392BKI[1]2[2]0
2472BKI[1]2[2]0
2562BKI[1]2[2]0
2682BKI[1]2[2]0
2822BKI[1]2[2]0
3102BKI[1]2[2]0
3122BKI[1]2[2]0
3152BKI[1]2[2]0
3182BKI[1]2[2]0
3152BKK[1]2[2]0
3182BKK[1]2[2]0
3222BKK[1]2[2]0
3272BKK[1]2[2]0
3332BKK[1]2[2]0
3392BKK[1]2[2]0
3472BKK[1]2[2]0
3562BKK[1]2[2]0
3682BKK[1]2[2]0
3822BKK[1]2[2]0
4102BKP[1]2T0
4122BKP[1]2T0
4152BKP[1]4T0
4182BKP[1]4T0
4222BKP[1]4T0
4272BKP[1]4T0
4332BKP[1]5T0
4392BKP[1]5T0
7.0 x 16.5 x 26.0
3.8
-
4.5
-
5.5
-
6.8
-
8.5 x 18.0 x 26.0
8.3
-
9.8
-
22.5
-
2500
11.8
14.0
17.0
20.5
25.0
30.0
37.5
45.0
25.5
30.6
37.4
45.9
56.1
66.3
79.9
95.2
-
-
-
0.0082 10.0 x 19.5 x 26.0
0.010
-
-
0.012
-
12.0 x 22.0 x 26.0
0.015
-
0.018 12.5 x 22.5 x 26.5
-
2500 0.015
0.018
-
11.0 x 21.0 x 31.0
13.0 x 23.0 x 31.0
-
0.022
-
0.027
-
0.033
-
15.0 x 25.0 x 31.0 27.5
18.0 x 28.0 x 31.0
-
1700
0.039
81
-
0.047
67
-
0.056
66
-
0.068
115.6 3.5
139.4 3.4
100.0 7.8
120.0 9.1
54
-
21.0 x 31.0 x 31.0
0.082
58
-
0.10 15.7 x 28.5 x 41.5
11
-
-
0.12
0.15
0.18
0.22
0.27
0.33
0.39
18 x 32.5 x 41.5
18.5 x 35.5 x 43
10
-
150.0 10.4 10.9
180.0 11.9 12.5
220.0 12.7 13.3
270.0 14.5 15.2
330.0 16.4 17.2
390.0 17.1 18.0
8
10
15
15
15
15
15
8
21.5 x 38.5 x 43
24 x 44 x 42
37.5
10.2
20.3
1000
6
6
5
30 x 45 x 42
5
Notes
(1)
IRMS at 85 °C ambient temperature and 100 kHz
ESR at 85 °C and 100 kHz
Maximum tan value at 100 kHz
Please replace “[1]” by the lead length code and the “[2]” by the packaging type in accordance with section “Composition of Catalog
Number”
(2)
(3)
(4)
Revision: 28-May-2019
Document Number: 28255
11
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
PACKAGING INFORMATION
SPQ (pcs)
DIMENSIONS (1)
(mm)
MASS (2)
(g)
dt
(mm)
LOOSE IN BOX
It 5 mm
REEL PACK (3)
H = 18.5 mm; P0 = 12.7 mm
It = 25 mm
PITCH = 15 mm 0.4 mm
7.0 x 13.5 x 17.5
8.5 x 15.0 x 17.5
10.0 x 16.5 x 17.5
10.5 x 17.5 x 18.0
11.0 x 18.5 x 18.0
1.8
2.4
3
4
5
0.80 0.08
0.80 0.08
0.80 0.08
0.80 0.08
0.80 0.08
750
750
500
225
500
500
450
400
350
800
650
600
600
550
225
PITCH = 22.5 mm 0.4 mm
7.0 x 16.5 x 26.0
8.5 x 18.0 x 26.0
10.0 x 19.5 x 26.0
12.0 x 22.0 x 26.0
12.5 x 22.5 x 26.5
2.9
3.8
6.8
7.8
10
0.80 0.08
0.80 0.08
0.80 0.08
0.80 0.08
0.80 0.08
200
200
200
150
250
250
200
200
400
500
450
350
300
300
140
PITCH = 27.5 mm 0.4 mm
9.0 x 19.0 x 31.0
11.0 x 21.0 x 31.0
13.0 x 23.0 x 31.0
15.0 x 25.0 x 31.0
18.0 x 28.0 x 31.0
21.0 x 31.0 x 31.0
5.5
7.4
9.2
12.3
16.1
18.3
0.80 0.08
0.80 0.08
0.80 0.08
0.80 0.08
0.80 0.08
0.80 0.08
100
100
100
100
100
50
150
125
125
125
100
75
-
-
-
-
-
-
PITCH = 37.5 mm 0.4 mm
15.7 x 28.5 x 41.5
18.0 x 32.5 x 41.5
18.5 x 35.5 x 43.0
21.5 x 38.5 x 43.0
24.0 x 44.0 x 42.0
30.0 x 45.0 x 42.0
17.92
23.68
29.41
37.68
47.37
58.82
0.95 0.10
0.95 0.10
0.95 0.10
0.95 0.10
0.95 0.10
0.95 0.10
70
60
105
91
77
63
-
-
-
-
-
-
-
-
-
-
-
-
PITCH = 57.5 mm 0.4 mm
35.0 x 50.0 x 57.5
99.0
0.95 0.10
40
-
-
Notes
•
SPQ = Standard Packing Quantity
For tolerances see section “Space Requirements on Printed-Circuit Board”
Weight for short lead product only
(1)
(2)
(3)
H = in-tape height; P0 = sprocket hole distance
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoleers are designed for
mounting on printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to packaging information www.vishay.com/doc?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
• For original pitch = 15 mm the capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed-Circuit Board
The maximum space for length (lmax.), width (wmax.), and height (hmax.) of film capacitors to take in account on the printed circuit
board is shown in the drawings:
For products with pitch 15 mm, w = l = 0.3 mm and h = 0.1 mm
For products with 15 mm < pitch 27.5 mm, w = l = 0.5 mm and h = 0.1 mm
For products with pitch = 37.5 mm and 52.5 mm, w = l = 0.7 mm and h = 0.5 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
Revision: 28-May-2019
Document Number: 28255
12
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
wmax. = w + Δ
Eccentricity
I
max. = I + Δ
hmax. = h + Δ
Seating plane
For the minimum product dimensions for length (lmin.), width (wmin.), and height (hmin.) following tolerances of the components
are valid:
lmin. = l - l, wmin. = w - w, and hmin. = h - h following
For products with pitch = 15 mm, l = 0.5 mm and w = h = 0.5 mm
For products with 15 mm < pitch < 27.5 mm, l = 1.0 mm and w = h = 0.5 mm
For products with pitch = 27.5 mm, w = l = h = 1.0 mm
For products with pitch = 37.5 mm and 52.5 mm. w = l = 0.7 mm and h = 0.5 mm
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile we refer to the document “Soldering Conditions Vishay Film
Capacitors”: www.vishay.com/doc?28171
STORAGE TEMPERATURE
Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation.
RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS
Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C 1 °C, an atmospheric pressure
of 86 kPa to 106 kPa, and a relative humidity of 50 % 2 %.
For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
CHARACTERISTICS
Axis Title
Axis Title
1.2
1.0
0.8
0.6
0.4
0.2
0
10000
1000
100
4
3
10000
1000
100
2
1
0
-1
-2
-3
-4
-5
-6
10
10
-60
-20
20
60
100
140
-60 -40 -20
0
20 40 60 80 100 120
Ambient Temperature (°C)
Ambient Temperature (°C)
Capacitance as a function of ambient temperature (typical curve)
(1 kHz)
Max. DC and AC voltage as a function of temperature
Revision: 28-May-2019
Document Number: 28255
13
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
Axis Title
Axis Title
10000
10 000
1000
100
10
10000
1000
100
35
30
25
20
15
10
5
0.47 μF
1 μF
1000
100
10
15 μF
1
3.9 μF
0.1
0.01
0.001
10
10 000
0
0.1
1
10
100
1000
45
65
85
105
125
Frequency (kHz)
Ambient Temperature (°C)
Impedance as a function of frequency (typical curve)
Maximum allowed component temperature rise (T)
as a function of ambient temperature (Tamb
)
Axis Title
1 000 000
10000
1000
100
100 000
10 000
10
0
30
60
90
120
Ambient Temperature (°C)
2nd line
Insulation resistance as a function of ambient temperature
(typical curve)
Axis Title
Axis Title
1000
100
10
10000
1000
100
1000
100
10
10000
1000
100
47 nF
100 nF
470 nF
1 μF
2.2 μF
3.9 μF
27 nF
100 nF
470 nF
1 μF
2.2 μF
Tcomp ≤ 85 °C
1
Tcomp ≤ 85 °C
1
10
1000
10
1000
0.1
10
100
0.1
10
100
Frequency (kHz)
Frequency (kHz)
Maximum RMS voltage as a function of frequency (400 VDC
)
Maximum RMS voltage as a function of frequency (630 VDC)
Revision: 28-May-2019
Document Number: 28255
14
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
Axis Title
Axis Title
10000
1000
100
10
10000
1000
100
1000
100
10
85 °C < Tcomp ≤ 105 °C
10 nF
47 nF
100 nF
220 nF
470 nF
1 μF
10 nF
47 nF
100 nF
220 nF
470 nF
1 μF
1000
100
10
Tcomp ≤ 85 °C
10
1000
0.1
1
10
100
0.1
1
10
100
1000
Frequency (kHz)
Frequency (kHz)
Maximum RMS voltage as a function of frequency (850 VDC
)
)
)
Maximum RMS voltage as a function of frequency (850 VDC)
Axis Title
Axis Title
1000
100
10
10000
1000
100
1000
100
10
10000
1000
100
85 °C < Tcomp ≤ 105 °C
47 nF
100 nF
220 nF
470 nF
820 nF
47 nF
100 nF
470 nF
1 μF
2.2 μF
3.9 μF
Tcomp ≤ 85 °C
1
10
1000
10
1000
0.1
1
10
Frequency (kHz)
100
0.1
10
100
Frequency (kHz)
Maximum RMS voltage as a function of frequency (400 VDC
Maximum RMS voltage as a function of frequency (1000 VDC)
Axis Title
Axis Title
1000
100
10
10000
1000
100
1000
100
10
10000
1000
100
85 °C < Tcomp ≤ 105 °C
10 nF
22 nF
47 nF
100 nF
220 nF
470 nF
27 nF
100 nF
470 nF
1 μF
2.2 μF
Tcomp ≤ 85 °C
1
10
1000
10
1000
0.1
1
10
Frequency (kHz)
100
0.1
10
100
Frequency (kHz)
Maximum RMS voltage as a function of frequency (630 VDC
Maximum RMS voltage as a function of frequency (1250 VDC)
Revision: 28-May-2019
Document Number: 28255
15
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
Axis Title
Axis Title
10000
1000
100
10
10000
1000
100
1000
100
10
4.7 nF
10 nF
4.7 nF
10 nF
47 nF
47 nF
1000
100
10
100 nF
220 nF
100 nF
220 nF
Tcomp ≤ 85 °C
85 °C < Tcomp ≤ 105 °C
10
10 000
0.1
1
10
100
1000
0.1
1
10
Frequency (kHz)
100
1000
Frequency (kHz)
Maximum RMS voltage as a function of frequency (1600 VDC
)
)
)
Maximum RMS voltage as a function of frequency (1600 VDC
)
)
)
Axis Title
Axis Title
1000
100
10
10000
1000
100
1000
100
10
10000
1000
100
85 °C < Tcomp ≤ 105 °C
1 nF
4.7 nF
22 nF
47 nF
100 nF
47 nF
100 nF
220 nF
470 nF
820 nF
Tcomp ≤ 85 °C
1
10
1000
10
10 000
0.1
1
10
Frequency (kHz)
100
0.1
10
100
1000
Frequency (kHz)
Maximum RMS voltage as a function of frequency (1000 VDC
Maximum RMS voltage as a function of frequency (2000 VDC
Axis Title
Axis Title
1000
100
10
10000
1000
100
1000
100
10
10000
1000
100
85 °C < Tcomp ≤ 105 °C
1 nF
4.7 nF
10 nF
22 nF
47 nF
82 nF
10 nF
22 nF
47 nF
100 nF
220 nF
470 nF
Tcomp ≤ 85 °C
1
10
1000
10
10 000
0.1
1
10
Frequency (kHz)
100
0.1
10
100
1000
Frequency (kHz)
Maximum RMS voltage as a function of frequency (1250 VDC
Maximum RMS voltage as a function of frequency (2500 VDC
Revision: 28-May-2019
Document Number: 28255
16
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
Axis Title
Axis Title
10000
1000
100
10
10000
1000
100
1000
100
10
1 nF
1 nF
4.7 nF
22 nF
47 nF
100 nF
4.7 nF
10 nF
22 nF
1000
100
10
47 nF
82 nF
85 °C < Tcomp ≤ 105 °C
85 °C < Tcomp ≤ 105 °C
10
1000
0.1
1
10
100
0.1
1
10
100
1000
10 000
Frequency (kHz)
Frequency (kHz)
Maximum RMS voltage as a function of frequency (2000 VDC
)
Maximum RMS voltage as a function of frequency (2500 VDC)
Axis Title
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
10000
1000
100
10
45
65
85
105
125
Ambient Temperature (°C)
Maximum IRMS current in function of the ambient temperature
(typical curve)
Axis Title
Axis Title
100
10
1
10000
1000
100
100
10
1
10000
1000
100
3.3 μF
3.9 μF
4.7 μF
5.6 μF
6.8 μF
8.2 μF
2.7 μF
3.3 μF
3.9 μF
4.7 μF
5.6 μF
6.8 μF
8.2 μF
15 μF
10 μF
12 μF
15 μF
10
10
1
10
100
1
10
Frequency (kHz)
100
Frequency (kHz)
ESR as a function of frequency (400 VDC
)
ESR as a function of frequency (630 VDC
(typical curve)
)
(typical curve)
Revision: 28-May-2019
Document Number: 28255
17
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
Axis Title
Axis Title
10000
100
10
1
10000
1000
100
100
10
1
0.47 μF
0.56 μF
0.68 μF
0.82 μF
1000
100
10
1.5 μF
1.7 μF
1.8 μF
2.2 μF
2.7 μF
3.3 μF
3.9 μF
4.7 μF
1.0 μF
1.2 μF
10
1
10
100
1
10
100
Frequency (kHz)
Frequency (kHz)
ESR as a function of frequency (850 VDC
)
ESR as a function of frequency (1600 VDC
(typical curve)
)
(typical curve)
Axis Title
Axis Title
100
10
1
10000
1000
100
100
10
1
10000
1000
100
1.0 μF
1.2 μF
1.5 μF
1.8 μF
0.33 μF
0.39 μF
0.47 μF
0.56 μF
0.68 μF
2.2 μF
2.7 μF
3.3 μF
10
10
1
10
100
1
10
100
Frequency (kHz)
Frequency (kHz)
ESR as a function of frequency (1000 VDC
(typical curve)
)
ESR as a function of frequency (2000 VDC
(typical curve)
)
Axis Title
Axis Title
100
10
1
10000
1000
100
1000
100
10
10000
1000
100
0.10 μF
0.12 μF
0.15 μF
0.18 μF
0.22 μF
0.27 μF
0.33 μF
0.39 μF
0.82 μF
1.0 μF
1.2 μF
1.5 μF
1.8 μF
2.2 μF
2.7 μF
10
1
10
1
10
100
1
10
100
Frequency (kHz)
Frequency (kHz)
ESR as a function of frequency (1250 VDC
(typical curve)
)
ESR as a function of frequency (2500 VDC
(typical curve)
)
Revision: 28-May-2019
Document Number: 28255
18
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
Axis Title
1000
100
10
10000
1000
Curve 7
Curve 8
Curve 9
Curve 10
Curve 11
Curve 1
Curve 2
Curve 3
Curve 4
Curve 5
Curve 6
100
10
1
100
1000
10 000
100 000
1 000 000
Frequency (Hz)
Axis Title
1000
100
10
10000
Curve 12
Curve 13
Curve 14
Curve 15
Curve 16
Curve 17
Curve 18
1000
100
10
Curve 19
Curve 20
Curve 21
1
100
1000
10 000
100 000
Frequency (Hz)
Tangent of loss angle as a function of frequency
(typical curves)
400 V:
630 V:
850 V:
1000 V:
0.047 μF C 0.068 μF, curve 3
0.082 μF C 0.18 μF, curve 4
0.22 μF C 0.39 μF, curve 8
0.47 μF C 1.2 μF, curve 11
1.5 μF C 3.9 μF, curve 12
4.7 μF C 15 μF, curve 13
0.027 μF C 0.033 μF, curve 2
0.039 μF C 0.1 μF, curve 3
0.12 μF C 0.24 μF, curve 7
0.27 μF C 1 μF, curve 9
1.2 μF C 2.2 μF, curve 10
2.7 μF C 8.2 μF, curve 14
15 μF, curve 15
0.01 μF C 0.027 μF, curve 1 0.018 μF C 0.047 μF, curve 1
0.033 μF C 0.068 μF, curve 3 0.056 μF C 0.082 μF, curve 3
0.082 μF C 0.15 μF, curve 4 0.1 μF C 0.27 μF, curve 4
0.33 μF C 0.82 μF, curve 5
1.0 μF C 3.3 μF, curve 17
0.18 μF C 0.68 μF, curve 5
0.82 μF C 1.2 μF, curve 6
1.5 μF C 4.7 μF, curve 16
1250 V:
1600 V:
2000 V:
2500 V:
0.0082 μF C 0.039 μF, curve 1 0.0039 μF C 0.012 μF, curve 1 0.001 μF C 0.012 μF, curve 1 0.001 μF C 0.082 μF, curve 1
0.1 μF C 0.39 μF, curve 21
0.047 μF C 0.082 μF, curve 3
0.1 μF C 0.56 μF, curve 4
0.82 μF C 2.7 μF, curve 18
0.015 μF C 0.22 μF, curve 2
0.27 μF C 0.33 μF, curve 3
0.47 μF C 1.2 μF, curve 19
0.015 μF C 0.18 μF, curve 2
0.33 μF C 0.68 μF, curve 20
Revision: 28-May-2019
Document Number: 28255
19
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
HEAT CONDUCTIVITY (G) AS A FUNCTION OF ORIGINAL PITCH AND CAPACITOR BODY
THICKNESS IN mW/°C
HEAT CONDUCTIVITY (mW/°C)
wmax.
(mm)
PITCH 15 mm
PITCH 22.5 mm
PITCH 27.5 mm
PITCH 37.5 mm
PITCH 52.5 mm
3.0
3.5
-
-
-
-
-
-
-
-
-
-
4.0
-
-
-
-
-
4.5
-
-
-
-
-
5.0
-
-
-
-
-
6.0
-
-
-
-
-
7.0
8.5
9.0
14
16
19
21
22
-
-
-
-
-
-
-
-
-
-
-
-
17
20
-
23
-
-
-
21
-
-
24
-
-
-
-
-
-
-
-
-
-
46
54
60
-
68
78
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
10.0
11.0
12.0
13.0
15.0
15.7
18.0
18.5
21.0
21.5
24.0
25.0
30.0
35.0
-
28
29
-
-
-
-
-
-
-
-
28
32
39
-
45
-
-
-
-
-
90
-
133
POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE
The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function
of the free air ambient temperature.
The power dissipation can be calculated according type detail specification www.vishay.com/doc?28147
The component temperature rise (T) can be measured (see section “Measuring the component temperature” for more details)
or calculated by T = P/G:
• T = component temperature rise (°C)
• P = power dissipation of the component (mW)
• G = heat conductivity of the component (mW/°C)
MEASURING THE COMPONENT TEMPERATURE
A thermocouple must be attached to the capacitor body as in:
Thermocouple
CBA758
The temperature is measured in unloaded (Tamb) and maximum loaded condition (TC).
The temperature rise is given by T = TC - Tamb.
To avoid radiation or convection, the capacitor should be tested in a wind-free box.
Revision: 28-May-2019
Document Number: 28255
20
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
APPLICATION NOTES
For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information
depending of the capacitance value and the number of parallel connections contact: dc-film@vishay.com
These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as
described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic
interference suppression capacitors conforming the standards must be used.
To select the capacitor for a certain application, the following conditions must be checked:
1. The peak voltage (Up) shall not be greater than the rated DC voltage (URDC
)
2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum (Up-p) to avoid the ionization inception level
3. The voltage peak slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without
ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URDC and
divided by the applied voltage.
For all other pulses following equation must be fulfilled:
T
------- 2 dt URDC -------
dU
dt
dU
2
dt
rated
0
T is the pulse duration
4. The maximum component surface temperature rise must be lower than the limits (see graph “Max. allowed component
temperature rise”)
5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor
breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values
mentioned in the table: “Heat Conductivity”
6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected
with an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes
and surge voltages from the mains included)
Note
• See table “Voltage Ratings and Temperature”
7. For capacitors with multiple pins in some cases it is allowed to feed current through the pins additionally to the capacitor to
improve filtering properties
I1 + I2
I1
P2
I2
P1
P2
I1 + I2
I1
P1 and P2 are the pin distance dimensions as mentioned in the mechanical dimensions.
In this case the pins carry the currents I1 (= the fed through current) and I2 (= the capacitor current). Due to the additional
heating up this fed through current must be limited to 10 % of the maximum allowed capacitor current I2. For other currents
contact dc-film@vishay.com.
Revision: 28-May-2019
Document Number: 28255
21
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
INSPECTION REQUIREMENTS
General Notes
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Specific Reference Data”.
IEC 60384-17 - FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC AC AND PULSE
CAPACITORS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE OF
SUB-GROUP C1
4.1 Dimensions (detail)
As specified in Chapters “General data” of
this specification
4.3.1 Initial measurements
Capacitance
Tangent of loss angle:
C ≤ 1 μF at 100 kHz
1 μF < C ≤ 10 μF at 10 kHz
4.3 Robustness of terminations
4.4 Resistance to soldering heat
Tensile: load 10 N; 10 s
No visible damage
Bending: load 5 N; 4 x 90°
Method: 1 A
Solder bath: 280 °C 5 °C
Duration: 10 s
4.14 Component solvent resistance
4.4.2 Final measurements
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min 0.5 min
Recovery time:
min. 1 h, max. 2 h
Visual examination
No visible damage
Legible marking
Capacitance
lC/Cl 1 % of the value measured initially.
Tangent of loss angle
Increase of tan :
0.0005 for: C 100 nF at 100 kHz
0.0010 for: 100 nF < C 470 nF at 100 kHz
0.0015 for: 470 nF < C 1 μF at 100 kHz
0.0015 for: 1 μF < C 10 μF at 10 kHz
Compared to values measured in 4.3.1
SUB-GROUP C1B OTHER PART OF SAMPLE
OF SUB-GROUP C1
4.6.1 Initial measurements
Capacitance
Tangent of loss angle:
C 1 μF at 100 kHz
1 μF < C 10 μF at 10 kHz
4.15 Solvent resistance of the marking
Isopropylalcohol at room temperature
Method: 1
No visible damage
Legible marking
Rubbing material: cotton wool
Immersion time: 5 min 0.5 min
4.6 Rapid change of temperature
A = -40 °C
B = +105 °C
5 cycles
Duration t = 30 min
Visual examination
No visible damage
Revision: 28-May-2019
Document Number: 28255
22
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
IEC 60384-17 - FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC AC AND PULSE
CAPACITORS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1B OTHER PART OF SAMPLE
OF SUB-GROUP C1
4.7.
Vibration
Mounting: see section “Mounting” for
more information
Procedure B4
Frequency range: 10 Hz to 55 Hz.
Amplitude: 0.75 mm or
acceleration 98 m/sꢁ
(whichever is less severe)
Total duration 6 h.
4.7.2
4.9
Final inspection
Shock
Visual examination
No visible damage
Mounting: see section “Mounting” for
more information
Pulse shape: half sine
Acceleration: 490 m/sꢁ
Duration of pulse: 11 ms
4.9.3
Final measurements
Visual examination
Capacitance
No visible damage
lC/Cl ≤ 2 % of the value measured in 4.6.1.
Tangent of loss angle
Increase of tan : 0.0005
0.0005 for: C 100 nF at 100 kHz
0.0010 for: 100 nF < C 470 nF at 100 kHz
0.0015 for: 470 nF < C 1 μF at 100 kHz
0.0015 for: 1 μF < C 10 μF at 10 kHz
Compared to values measured in 4.6.1
Insulation resistance
As specified in section “Insulation
Resistance” of this specification.
SUB-GROUP C1
COMBINED SAMPLE OF SPECIMENS OF
SUB-GROUPS C1A AND C1B
4.10
Climatic sequence
4.10.2 Dry heat
Temperature +105 °C
Duration: 16 h
4.10.3 Damp heat cyclic
Test Db, first cycle
4.10.4 Cold
Temperature: -40 °C
Duration: 2 h
4.10.6 Damp heat cyclic
Test Db remaining cycles
4.10.6.2 Final measurements
Voltage proof = URDC for 1 min within
15 min after removal from test chamber
No breakdown or flashover
Visual examination
Capacitance
No visible damage
Legible marking
lC/Cl 2 % of the value measured in 4.4.2
or 4.9.3
Tangent of loss angle
Increase of tan :
0.0005 for: C 100 nF at 100 kHz
0.0010 for: 100 nF < C 470 nF at 100 kHz
0.0015 for: 470 nF < C 1 μF at 100 kHz
0.0015 for: 1 μF < C 10 μF at 10 kHz
Compared to values measured in 4.3.1
or 4.6.1
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification.
Revision: 28-May-2019
Document Number: 28255
23
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
IEC 60384-17 - FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC AC AND PULSE
CAPACITORS
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C2
CONDITIONS
PERFORMANCE REQUIREMENTS
4.11
Damp heat steady state
56 days; 40 °C; 90 % to 95 % RH
no load
4.11.1 Initial measurements
4.11.3 Final measurements
Capacitance
Tangent of loss angle at 1 kHz
Voltage proof = URDC for 1 min within
15 min after removal from test chamber
No breakdown or flashover
Visual examination
No visible damage
Legible marking
Capacitance
lC/Cl 2 % of the value measured in
4.11.1.
Tangent of loss angle
Insulation resistance
Increase of tan 0.0025 at 1 kHz
Compared to values measured in 4.11.1.
50 % of values specified in section
“Insulation resistance” of this specification
SUB-GROUP C2A
4.12A Damp heat steady state with load
60 °C; 93 % RH load:
U
RDC duration: 56 days
4.12.1A Initial measurements
4.12.3A Final measurements
Capacitance
Tangent of loss angle at
for C 1 μF at 10 kHz
for C > 1 μF at 1 kHz
Visual examination
No visible damage
Legible marking
Capacitance
lC/Cl 10 % of the value measured in
4.12.1.
Tangent of loss angle
Increase of tan :
0.0240 for C 1 μF or
0.0150 for C > 1 μF
Compared to values measured in 4.12.1.
Voltage proof
No permanent breakdown or flashover
U
RDC; 1 min between terminations
Insulation resistance
50 % of values specified in section
“Insulation resistance” of this specification
Revision: 28-May-2019
Document Number: 28255
24
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
IEC 60384-17 - FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC AC AND PULSE
CAPACITORS
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C3A
CONDITIONS
PERFORMANCE REQUIREMENTS
Duration: 2000 h
4.12.1 Endurance
Temperature: 85 °C
Voltage: 1.25 x URAC VRMS, 50 Hz
AND
Duration: 2000 h
Temperature: 105 °C
Voltage: 0.875 x URAC VRMS, 50 Hz
Capacitance
4.12.1.1 Initial measurements
4.12.1.3 Final measurements
Tangent of loss angle
C 1 μF at 100 kHz
1 μF < C 10 μF at 10 kHz
Visual examination
Capacitance
No visible damage
Legible marking
lC/Cl 5 % for C > 10 nF
lC/Cl 8 % for C 10 nF
Compared to values measured in 4.12.1.1
Increase of tan :
Tangent of loss angle
0.0005 for: C 100 nF at 100 kHz
0.0010 for: 100 nF < C 470 nF at 100 kHz
0.0015 for: 470 nF < C 1 μF at 100 kHz
0.0015 for 1 μF < C 10 μF at 10 kHz
Compared to values measured in 4.12.1.1
Insulation resistance
50 % of values specified in section
“Insulation resistance” of this specification.
SUB-GROUP C3B
0.625 x URAC at 125 °C
500 h
4.12.2 Endurance test at 50 Hz
alternating voltage
4.12.2.1 Initial measurements
4.12.2.3 Final measurements
Capacitance
Tangent of loss angle:
C 1 μF at 100 kHz
1 μF < C 10 μF at 10 kHz
Visual examination
Capacitance
No visible damage
Legible marking
lC/Cl ≤ 10 % + 100 pF compared to values
measured in 4.12.2.1
Tangent of loss angle
Increase of tan :
0.0005 for: C 100 nF at 100 kHz
0.0010 for: 100 nF < C 470 nF at 100 kHz
0.0015 for: 470 nF < C 1 μF at 100 kHz
0.0015 for: 1 μF < C 10 μF at 10 kHz
Compared to values measured in 4.12.2.1
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification.
Revision: 28-May-2019
Document Number: 28255
25
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
IEC 60384-17 - FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC AC AND PULSE
CAPACITORS
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C4
CONDITIONS
PERFORMANCE REQUIREMENTS
4.2.6 Temperature characteristics
Initial measurements
Capacitance
For -40 °C to +20 °C:
+1 % lC/Cl 3.75 % or
for 20 °C to 125 °C:
Capacitance at -40 °C
Capacitance at 20 °C
Capacitance at +125 °C
Intermediate measurements
-7.5 % lC/Cl 0 %
Compared to values measured in 4.12.1.1
Final measurements
Capacitance
As specified in section “Capacitance” of this
specification
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
4.13 Charge and discharge
10 000 cycles
Charged to URDC
Discharge resistance:
URDC
R = ---------------------------------------
2.5 x C (dU/dt)
4.13.1 Initial measurements
4.13.3 Final measurements
Capacitance
Tangent of loss angle:
C ≤ 1 μF at 100 kHz
1 μF < C 10 μF at 10 kHz
C 10 μF at 1 kHz
Capacitance
lC/Cl 1 % compared to values measured
in 4.13.1.
Tangent of loss angle
Increase of tan :
0.0005 for: C 100 nF at 100 kHz
0.0010 for: 100 nF < C 470 nF at 100 kHz
0.0015 for: 470 nF < C 1 μF at 100 kHz
0.0015 for: 1 μF < C 10 μF at 10 kHz
Compared to values measured in 4.13.1
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification.
Revision: 28-May-2019
Document Number: 28255
26
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP385e
Vishay BCcomponents
www.vishay.com
AUTOMOTIVE AEC-Q200, REVISION D QUALIFICATION
SAMPLE
SIZE
STRESS
REVISION
CONDITION
PERFORMANCE REQUIREMENTS
1. High
D
Test as per MIL-STD 202, method 108
Temp.: 105 ºC; unpowered
Duration: 1000 h
77
|C/C| 5 %
temperature
0.0005 for C 100 nF at 100 kHz
exposure
(storage)
0.0010 for 100 nF < C 470 nF at 100 kHz
0.0015 for 470 nF < C 1 μF at 100 kHz
0.0015 for 1 μF < C 10 μF at 10 kHz
IR > 50 % of initial specified value
2. Temperature
D
D
Test as per JESD22, method JA-104
Total no. of cycles: 1000 cycles
Lower temp.: -40 °C
77
|C/C| 5 %
cycling
Increase of tan :
0.0005 for C 100 nF at 100 kHz
0.0010 for 100 nF < C 470 nF at 100 kHz
0.0015 for 470 nF < C 1 μF at 100 kHz
0.0015 for 1 μF < C 10 μF at 10 kHz
IR > 50 % of initial specified value
Upper temp: +105 °C
Dwell each 30 min as per rev. D
3. Moisture
Test as per MIL-STD 202, method 106
10 cycles at 24 h/cycle
unpowered
77
|C/C| 5 %
Increase of tan :
0.0005 for C 100 nF at 100 kHz
0.0010 for 100 nF < C 470 nF at 100 kHz
0.0015 for 470 nF < C 1 μF at 100 kHz
0.0015 for 1 μF < C 10 μF at 10 kHz
IR > 50 % of initial specified value
resistance
4. Biased
D
D
D
Test as per MIL-STD 202, method 103
77
77
77
|C/C| 5 %
humidity AC
Temp.: 40 °C; RH: 93 %; URAC
Increase of tan : 0.008 at 1 kHz
IR > 50 % of initial specified value
Duration: 1000 h
5. Biased
Test as per MIL-STD 202, method 103
|C/C| 5 %
Increase of tan : 0.008 at 1 kHz
IR > 50 % of initial specified value
humidity DC
Temp.: 40 °C; RH: 93 %; URDC
Duration: 1000 h
6. Operational
Test as per MIL-STD 202, method 108
|C/C| 5 %
Increase of tan :
0.0005 for C 100 nF at 100 kHz
0.0010 for 100 nF < C 470 nF at 100 kHz
0.0015 for 470 nF < C 1 μF at 100 kHz
0.0015 for 1 μF < C 10 μF at 10 kHz
IR > 50 % of initial specified value
life AC
Temp. = 105 °C; load = URAC
Duration: 1000 h
7. Operational
D
Test as per MIL-STD 202, method 108
77
|C/C| 5 %
life DC
Temp. = 105 °C; Load = URDC
Increase of tan :
Duration: 1000 h
0.0005 for C 100 nF at 100 kHz
0.0010 for 100 nF < C 470 nF at 100 kHz
0.0015 for 470 nF < C 1 μF at 100 kHz
0.0015 for 1 μF < C 10 μF at 10 kHz
IR > 50 % of initial specified value
8. Terminal
D
D
Test as per MIL-STD 202, method 211
Test leaded device lead integrity only.
- A (pull-test): 2.27 kg (10 s)
30
5
No visual damage
strength (leaded)
- C (wire-lead bend test): 227 g (3 x 3 s)
9. Resistance
MIL-STD-202 method 215
- Also aqueous chemical
- OKEM clean or equivalent.
Do not use banned solvents.
No visual damage
Legible marking
to solvents
10. Mechanical
D
D
MIL-STD-202 method 213
100 g's; 6 ms;
30
30
No visual damage
No visual damage
shock
half sine; 3.75 m/s
11. Vibration
MIL-STD-202 method 204
5 g's for 20 min
12 cycles x 3 directions
10 Hz to 2000 Hz
12. Resistance to
D
MIL-STD-202 method 210
30
|C/C| 5 %
soldering heat
Temp.: 280 °C; time: 10 s
Increase of tan :
solder within 1.5 mm of device body
0.0005 for C 100 nF at 100 kHz
0.0010 for 100 nF < C 470 nF at 100 kHz
0.0015 for 470 nF < C 1 μF at 100 kHz
0.0015 for 1 μF < C 10 μF at 10 kHz
IR > 50 % of initial specified value
13. Solderability
14. Flammability
D
D
J-STD-002
15
15
Good tinning as evidence by free flowing of the
Leaded: method A at 235 °C,
category 3 (245 °C / 3 s)
solder with wetting of terminations > 95 %
UL-94
One flame application
Class B
V-0 is acceptable.
Class B or C according IEC is also acceptable
Revision: 28-May-2019
Document Number: 28255
27
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2019
Document Number: 91000
1
MKP385E1471AJIM2W0 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| MKP385E1471AJIM4W0 | VISHAY | THB AC and Pulse Metallized Polypropylene Film Capacitors High Temperature AEC-Q200 Qualified | 获取价格 |
|
| MKP385E1471AJIP2B/T0 | VISHAY | THB AC and Pulse Metallized Polypropylene Film Capacitors High Temperature AEC-Q200 Qualified | 获取价格 |
|
| MKP385E1471AJIP2W0 | VISHAY | THB AC and Pulse Metallized Polypropylene Film Capacitors High Temperature AEC-Q200 Qualified | 获取价格 |
|
| MKP385E1471AJIP4B/T0 | VISHAY | THB AC and Pulse Metallized Polypropylene Film Capacitors High Temperature AEC-Q200 Qualified | 获取价格 |
|
| MKP385E1471AJIP4W0 | VISHAY | THB AC and Pulse Metallized Polypropylene Film Capacitors High Temperature AEC-Q200 Qualified | 获取价格 |
|
| MKP385E1471AJKI2B/T0 | VISHAY | THB AC and Pulse Metallized Polypropylene Film Capacitors High Temperature AEC-Q200 Qualified | 获取价格 |
|
| MKP385E1471AJKI2W0 | VISHAY | THB AC and Pulse Metallized Polypropylene Film Capacitors High Temperature AEC-Q200 Qualified | 获取价格 |
|
| MKP385E1471AJKM2B/T0 | VISHAY | THB AC and Pulse Metallized Polypropylene Film Capacitors High Temperature AEC-Q200 Qualified | 获取价格 |
|
| MKP385E1471AJKM2W0 | VISHAY | THB AC and Pulse Metallized Polypropylene Film Capacitors High Temperature AEC-Q200 Qualified | 获取价格 |
|
| MKP385E1471AJKM4W0 | VISHAY | THB AC and Pulse Metallized Polypropylene Film Capacitors High Temperature AEC-Q200 Qualified | 获取价格 |
|
MKP385E1471AJIM2W0 相关文章
HARTING(浩亭)圆形连接器产品选型手册
- 2024-10-31
- 6
HYCON(宏康科技)产品选型手册
- 2024-10-31
- 6
GREEGOO整流二极管和晶闸管产品选型手册
- 2024-10-31
- 7
西门子豪掷106亿美元，战略收购工程软件巨头Altair
- 2024-10-31
- 8
