MKT1820568165 [VISHAY]
CAP FILM 6.8UF 10% 160VDC RADIAL;
| 型号： | MKT1820568165 |
| 厂家： | 
VISHAY |
| 描述： | CAP FILM 6.8UF 10% 160VDC RADIAL |
| 文件： | 总17页 (文件大小：179K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MKT1820
Vishay Roederstein
www.vishay.com
DC Film Capacitors
MKT Radial Potted Type
FEATURES
•
AEC-Q200 qualified (rev. D) for PCM
(for larger available components on request)
27.5 mm
Available
• High temperature capabilities, up to 150 °C
• Capacitance up to 560 μF
• 4-pin version available under request for pitch
37.5 mm, under request
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
• Automotive
• DC filtering
• Low voltage DC link
QUICK REFERENCE DATA
Capacitance range
Capacitance tolerance
Climatic testing class according to IEC 60068-1
Maximum application temperature
Reference standards
1000 pF to 560 μF
20 %, 10 %, 5 %
55/125/56
125 °C
IEC 60384-2
Dielectric
Electrodes
Polyester film
Metallized
Mono construction
Series construction (630 V and 1000 V)
Construction
Encapsulation
Leads
Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0
Tinned wire
C-value; tolerance; rated voltage; code for dielectric material;
code for manufacturing origin; manufacturer’s type designation;
manufacturer's logo or name; year and week of manufacture
Marking
Rated (DC) voltage
Rated (AC) voltage
63 VDC, 100 VDC, 160 VDC, 250 VDC, 400 VDC, 630 VDC, 1000 VDC
40 VAC, 63 VAC, 160 VAC, 200 VAC, 220 VAC
150 °C at 0.3 UR for maximum 200 h
(not applicable for pitch 37.5 mm)
Maximum operating temperature for limited time
Note
•
For more detailed data and test requirements, contact dc-film@vishay.com
DIMENSIONS in millimeters
l
w
h
0.6
lt = 6 - 1
(other on request)
Ø dt
PCM 0.4
Revision: 02-Feb-18
Document Number: 26011
1
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT1820
Vishay Roederstein
www.vishay.com
COMPOSITION OF CATALOG NUMBER
MULTIPLIER
(nF)
CAPACITANCE
(numerically)
SPECIAL LETTER FOR SIZE
Standard version
0.1
1
2
3
4
5
6
7
M
Compact version
Example:
330 nF
433
547
656
0.33 µF
4.7 µF
56 µF
SPECIAL LETTER FOR TAPED
10
4700 nF
Bulk / Tray
100
1000
10 000
56 000 nF
W
V
Reel diameter 350 mm
Reel diameter 500 mm
Ammopack
727 270 000 nF 270 µF
G
MKT 1820
4
33
01
4
X
X
TOLERANCE
VOLTAGE
4
5
6
5 %
10 %
20 %
TYPE CONSTRUCTION
Un = 06 = 63 VDC
Un = 01 = 100 VDC
Un = 16 = 160 VDC
Un = 25 = 250 VDC
Un = 40 = 400 VDC
Un = 63 = 630 VDC
Un = 10 = 1000 VDC
METALLIZED POLYESTER
Notes
•
•
For detailed tape specifications refer to packaging information www.vishay.com/docs?28139 or end of catalog
For PCM 37.5 mm, 4 pin versions are available under customer request
SPECIFIC REFERENCE DATA
DESCRIPTION
VALUE
at 10 kHz
150 x 10-4 250 x 10-4
Tangent of loss angle:
C 0.1 μF
at 100 Hz
at 1 kHz
80 x 10-4
80 x 10-4
at 100 kHz
-
-
0.1 μF < C 1.0 μF
1.0 μF < C 10.0 μF
10.0 μF < C 100 μF
C > 100 μF
150 x 10-4
-
-
-
-
35 x 10-4 150 x 10-4
50 x 10-4 300 x 10-4
-
-
-
70 x 10-4
-
MAXIMUM PULSE RISE TIME (dU/dt)R [V/μs]
PITCH
(mm)
63 VDC
100 VDC
160 VDC
250 VDC
400 VDC
630 VDC
1000 VDC
10
12
8
18
10
6
-
-
36
20
12
8
52
32
18
14
-
70
66
38
28
-
260
130
68
50
-
15
22.5
27.5
37.5
52.5
5
-
3
5
6
0.8
0.2
1
2
3
0.3
0.4
1
-
-
-
If the maximum pulse voltage is less than the rated voltage higher dU/dt values can be permitted.
R between leads, for C 0.33 μF and UR 100 V
R between leads, for C 0.33 μF and UR > 100 V
RC between leads, for C > 0.33 μF and UR 100 V
RC between leads, for C > 0.33 μF and UR > 100 V
R between leads and case, 100 V; (foil method)
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time < 1000 V/s
Withstanding (DC) leads and case
> 15 000 M
> 30 000 M
> 5000 s
> 10 000 s
> 30 000 M
1.6 x URDC, 1 min
2 x URDC, 1 min
125 °C
Maximum application temperature
Note
(1)
See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
Revision: 02-Feb-18
Document Number: 26011
2
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT1820
Vishay Roederstein
www.vishay.com
ELECTRICAL DATA
DIMENSIONS
w x h x l
URDC
(V)
CAP. CAPACITANCE VOLTAGE
PCM
(mm)
dt 0.08 mm ORDERING CODE FOR 10 %
VAC
(μF)
CODE
CODE
(mm)
TOL./BULK PACKING (2)
(mm) (1)
0.22
0.33
0.47
0.68
1.0
422
433
447
468
510
515
522
533
533
547
547
568
610
615
622
618
622
627
633
639
647
656
668
682
710
710
712
715
718
722
727
733
722
727
733
739
747
756
3.5 x 8.0 x 13.0
3.5 x 8.0 x 13.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
10.0
15.0
15.0
15.0
22.5
22.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
52.5
52.5
52.5
52.5
52.5
52.5
MKT1820422065
MKT1820433065
MKT1820447065
MKT1820468065
MKT1820510065
MKT1820515065
MKT1820522065
MKT1820533065M
MKT1820533065
MKT1820547065M
MKT1820547065
MKT1820568065
MKT1820610065
MKT1820615065
MKT1820622065M
MKT1820618065
MKT1820622065
MKT1820627065
MKT1820633065
MKT1820639065
MKT1820647065
MKT1820656065
MKT1820668065
MKT1820682065
MKT1820710065M
MKT1820710065
MKT1820712065
MKT1820715065
MKT1820718065
MKT1820722065M
MKT1820727065M
MKT1820733065M
MKT1820722065
MKT1820727065
MKT1820733065
MKT1820739065
MKT1820747065
MKT1820756065
3.5 x 8.0 x 13.0
4.0 x 9.0 x 13.0
4.5 x 9.5 x 13.0
1.5
5.5 x 10.5 x 13.0
6.5 x 11.5 x 13.0
9.0 x 15.5 x 13.0
6.5 x 12.5 x 18.0
9.0 x 15.5 x 13.0
7.5 x 13.5 x 18.0
8.5 x 14.5 x 18.0
8.5 x 17.5 x 18.0
8.5 x 16.5 x 26.5
10.5 x 18.5 x 26.5
9.0 x 19.0 x 32.0
11.0 x 21.0 x 32.0
11.0 x 21.0 x 32.0
13.0 x 23.0 x 32.0
13.0 x 23.0 x 32.0
15.0 x 25.0 x 32.0
18.0 x 28.0 x 32.0
18.0 x 28.0 x 32.0
21.0 x 31.0 x 32.0
21.0 x 31.0 x 32.0
18.5 x 35.5 x 43.0
18.5 x 35.5 x 43.0
18.5 x 35.5 x 43.0
21.5 x 38.5 x 43.0
24.0 x 44.0 x 42.0
30.0 x 45.0 x 42.0
30.0 x 45.0 x 42.0
25.0 x 45.0 x 57.5
25.0 x 45.0 x 57.5
25.0 x 45.0 x 57.5
30.0 x 45.0 x 57.5
35.0 x 50.0 x 57.5
35.0 x 50.0 x 57.5
2.2
3.3
3.3
4.7
4.7
6.8
10.0
15.0
22.0
18.0
22.0
27.0
33.0
39.0
47.0
56.0
68.0
82.0
100.0
100.0
120.0
150.0
180.0
220.0
270.0
330.0
220.0
270.0
330.0
390.0
470.0
560.0
0.80
63
06
40
1.0
1.2
Notes
(1)
For tolerances see chapter “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances”
Please replace “5” by: “4” for 5 % tolerance or “6” for 20 % tolerance
(2)
Revision: 02-Feb-18
Document Number: 26011
3
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT1820
Vishay Roederstein
www.vishay.com
ELECTRICAL DATA
DIMENSIONS
w x h x l
URDC
(V)
CAP. CAPACITANCE VOLTAGE
PCM
(mm)
dt 0.08 mm ORDERING CODE FOR 10 %
VAC
(μF)
CODE
CODE
(mm)
TOL./BULK PACKING (2)
(mm) (1)
0.068
0.10
0.15
0.22
0.33
0.47
0.68
1.0
368
410
415
422
433
447
468
510
510
515
522
533
547
547
568
610
615
615
618
622
627
633
639
647
656
656
668
682
710
712
715
718
712
715
718
722
727
733
3.5 x 8.0 x 13.0
3.5 x 8.0 x 13.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
52.5
52.5
52.5
52.5
52.5
52.5
MKT1820368015
MKT1820410015
MKT1820415015
MKT1820422015
MKT1820433015
MKT1820447015
MKT1820468015
MKT1820510015M
MKT1820510015
MKT1820515015
MKT1820522015
MKT1820533015
MKT1820547015M
MKT1820547015
MKT1820568015
MKT1820610015
MKT1820615015M
MKT1820615015
MKT1820618015
MKT1820622015
MKT1820627015
MKT1820633015
MKT1820639015
MKT1820647015
MKT1820656015M
MKT1820656015
MKT1820668015
MKT1820682015
MKT1820710015
MKT1820712015M
MKT1820715015M
MKT1820718015M
MKT1820712015
MKT1820715015
MKT1820718015
MKT1820722015
MKT1820727015
MKT1820733015
3.5 x 8.0 x 13.0
3.5 x 8.0 x 13.0
4.0 x 9.0 x 13.0
4.5 x 9.5 x 13.0
5.5 x 10.5 x 13.0
5.5 x 10.5 x 13.0
5.5 x 10.5 x 18.0
6.5 x 12.5 x 18.0
6.5 x 12.5 x 18.0
8.5 x 14.5 x 18.0
8.5 x 14.5 x 18.0
7.5 x 15.5 x 26.5
8.5 x 16.5 x 26.5
10.5 x 18.5 x 26.5
10.5 x 18.5 x 26.5
11.0 x 21.0 x 32.0
13.0 x 23.0 x 32.0
13.0 x 23.0 x 32.0
15.0 x 25.0 x 32.0
18.0 x 28.0 x 32.0
18.0 x 28.0 x 32.0
21.0 x 31.0 x 32.0
21.0 x 31.0 x 32.0
18.5 x 35.5 x 43.0
18.5 x 35.5 x 43.0
18.5 x 35.5 x 43.0
21.5 x 38.5 x 43.0
24.0 x 44.0 x 42.0
30.0 x 45.0 x 42.0
30.0 x 45.0 x 42.0
25.0 x 45.0 x 57.5
25.0 x 45.0 x 57.5
25.0 x 45.0 x 57.5
30.0 x 45.0 x 57.5
35.0 x 50.0 x 57.5
35.0 x 50.0 x 57.5
1.0
1.5
2.2
3.3
4.7
0.8
4.7
6.8
10.0
15.0
15.0
18.0
22.0
27.0
33.0
39.0
47.0
56.0
56.0
68.0
82.0
100.0
120.0
150.0
180.0
120.0
150.0
180.0
220.0
270.0
330.0
100
01
63
1.0
1.2
Notes
(1)
For tolerances see chapter “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances”
Please replace “5” by: “4” for 5 % tolerance or “6” for 20 % tolerance
(2)
Revision: 02-Feb-18
Document Number: 26011
4
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT1820
Vishay Roederstein
www.vishay.com
ELECTRICAL DATA
DIMENSIONS
w x h x l
URDC
(V)
CAP. CAPACITANCE VOLTAGE
PCM
(mm)
dt 0.08 mm ORDERING CODE FOR 10 %
VAC
(μF)
CODE
CODE
(mm)
TOL./BULK PACKING (2)
(mm) (1)
4.7
6.8
547
568
610
615
618
622
627
633
633
639
647
656
668
682
710
712
682
710
712
715
718
722
322
333
347
368
410
415
422
433
433
447
447
468
510
515
515
522
533
9.0 x 19.0 x 32.0
11.0 x 21.0 x 32.0
11.0 x 21.0 x 32.0
13.0 x 23.0 x 32.0
15.0 x 25.0 x 32.0
18.0 x 28.0 x 32.0
18.0 x 28.0 x 32.0
31.0 x 31.0 x 32.0
18.5 x 35.5 x 43.0
18.5 x 35.5 x 43.0
18.5 x 35.5 x 43.0
21.5 x 38.5 x 43.0
21.5 x 38.5 x 43.0
24.0 x 44.0 x 42.0
30.0 x 45.0 x 42.0
30.0 x 45.0 x 42.0
25.0 x 45.0 x 57.5
25.0 x 45.0 x 57.5
25.0 x 45.0 x 57.5
30.0 x 45.0 x 57.5
35.0 x 50.0 x 57.5
35.0 x 50.0 x 57.5
3.5 x 8.0 x 13.0
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
52.5
52.5
52.5
52.5
52.5
52.5
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
10.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
MKT1820547165
MKT1820568165
MKT1820610165
MKT1820615165
MKT1820618165
MKT1820622165
MKT1820627165
MKT1820633165M
MKT1820633165
MKT1820639165
MKT1820647165
MKT1820656165
MKT1820668165
MKT1820682165M
MKT1820710165M
MKT1820712165M
MKT1820682165
MKT1820710165
MKT1820712165
MKT1820715165
MKT1820718165
MKT1820722165
MKT1820322255
MKT1820333255
MKT1820347255
MKT1820368255
MKT1820410255
MKT1820415255
MKT1820422255
MKT1820433255M
MKT1820433255
MKT1820447255M
MKT1820447255
MKT1820468255
MKT1820510255
MKT1820515255M
MKT1820515255
MKT1820522255
MKT1820533255
10.0
15.0
18.0
22.0
27.0
33.0
33.0
39.0
47.0
56.0
68.0
82.0
100.0
120.0
82.0
100.0
120.0
150.0
180.0
220.0
0.022
0.033
0.047
0.068
0.10
0.15
0.22
0.33
0.33
0.47
0.47
0.68
1.0
0.8
160
16
63
1.0
1.2
3.5 x 8.0 x 13.0
3.5 x 8.0 x 13.0
3.5 x 8.0 x 13.0
4.5 x 9.5 x 13.0
5.5 x 10.5 x 13.0
6.5 x 11.5 x 13.0
6.5 x 11.5 x 13.0
5.5 x 10.5 x 18.0
9.0 x 15.5 x 13.0
6.5 x 12.5 x 18.0
7.5 x 13.5 x 18.0
8.5 x 14.5 x 18.0
10.5 x 17,5 x 18.0
8.5 x 16.5 x 26.5
10.5 x 18.5 x 26.5
12.5 x 20.0 x 26.5
250
25
160
0.8
1.5
1.5
2.2
3.3
Notes
(1)
For tolerances see chapter “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances”
Please replace “5” by: “4” for 5 % tolerance or “6” for 20 % tolerance
(2)
Revision: 02-Feb-18
Document Number: 26011
5
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT1820
Vishay Roederstein
www.vishay.com
ELECTRICAL DATA
DIMENSIONS
w x h x l
URDC
(V)
CAP. CAPACITANCE VOLTAGE
PCM
(mm)
dt 0.08 mm ORDERING CODE FOR 10 %
VAC
(μF)
CODE
CODE
(mm)
TOL./BULK PACKING (2)
(mm) (1)
4.7
6.8
547
568
610
615
618
618
622
627
633
639
647
656
668
656
668
682
710
712
310
315
322
333
347
368
410
415
415
422
422
433
447
468
510
515
515
522
533
547
11.0 x 21.0 x 32.0
13.0 x 23.0 x 32.0
15.0 x 25.0 x 32.0
18.0 x 28.0 x 32.0
21.0 x 31.0 x 32.0
18.5 x 35.5 x 43.0
18.5 x 35.5 x 43.0
18.5 x 35.5 x 43.0
21.5 x 38.5 x 43.0
21.5 x 38.5 x 43.0
24.0 x 44.0 x 42.0
30.0 x 45.0 x 42.0
30.0 x 45.0 x 42.0
25.0 x 45.0 x 57.5
25.0 x 45.0 x 57.5
25.0 x 45.0 x 57.5
30.0 x 45.0 x 57.5
35.0 x 50.0 x 57.5
3.5 x 8.0 x 13.0
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
52.5
52.5
52.5
52.5
52.5
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
10.0
15.0
15.0
15.0
22.5
22.5
22,5
27.5
27.5
27.5
27.5
MKT1820547255
MKT1820568255
MKT1820610255
MKT1820615255
MKT1820618255M
MKT1820618255
MKT1820622255
MKT1820627255
MKT1820633255
MKT1820639255
MKT1820647255
MKT1820656255M
MKT1820668255M
MKT1820656255
MKT1820668255
MKT1820682255
MKT1820710255
MKT1820712255
MKT1820310405
MKT1820315405
MKT1820322405
MKT1820333405
MKT1820347405
MKT1820368405
MKT1820410405
MKT1820415405M
MKT1820415405
MKT1820422405M
MKT1820422405
MKT1820433405
MKT1820447405
MKT1820468405
MKT1820510405
MKT1820515405M
MKT1820515405
MKT1820522405
MKT1820533405
MKT1820547405
10.0
15.0
18.0
18.0
22.0
27.0
33.0
39.0
47.0
56.0
68.0
56.0
68.0
82.0
100.0
120.0
0.010
0.015
0.022
0.033
0.047
0.068
0.10
0.15
0.15
0.22
0.22
0.33
0.47
0.68
1.0
0.8
250
25
100
1.0
1.2
3.5 x 8.0 x 13.0
3.5 x 8.0 x 13.0
4.0 x 9.0 x 13.0
4.5 x 9.5 x 13.0
5.5 x 10.5 x 13.0
6.5 x 11.5 x 13.0
9.0 x 15.5 x13.0
6.5 x 12.5 x 18.0
9.0 x 15.5 x 13.0
6.5 x 12.5 x 18.0
7.5 x 13.5 x 18.0
8.5 x 17.5 x 18.0
8.5 x 16.5 x 26.5
10.5 x 18.5 x 26.5
11.0 x 21.0 x 26.5
11.0 x 21.0 x 31.0
13.5 x 23.5 x 31.5
15 x 24.5 x 31.5
18.0 x 28.0 x 31.5
400
40
200
0.8
1.5
1.5
2.2
3.3
4.7
Notes
(1)
For tolerances see chapter “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances”
Please replace “5” by: “4” for 5 % tolerance or “6” for 20 % tolerance
(2)
Revision: 02-Feb-18
Document Number: 26011
6
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT1820
Vishay Roederstein
www.vishay.com
ELECTRICAL DATA
DIMENSIONS
w x h x l
URDC
(V)
CAP. CAPACITANCE VOLTAGE
PCM
(mm)
dt 0.08 mm ORDERING CODE FOR 10 %
VAC
(μF)
CODE
CODE
(mm)
TOL./BULK PACKING (2)
(mm) (1)
0.0010
0.0015
0.0022
0.0033
0.0047
0.0068
0.010
0.015
0.022
0.033
0.033
0.047
0.047
0.068
0.10
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
0.0010
0.0015
0.0022
0.0033
0.0047
0.0068
0.010
0.015
0.022
0.033
0.033
0.047
0.068
0.10
210
215
222
233
247
268
310
315
322
333
333
347
347
368
410
410
415
422
433
447
468
510
515
210
215
222
233
247
268
310
315
322
333
333
347
368
410
415
422
433
447
3.5 x 8.0 x 13.0
3.5 x 8.0 x 13.0
3.5 x 8.0 x 13.0
3.5 x 8.0 x 13.0
3.5 x 8.0 x 13.0
3.5 x 8.0 x 13.0
4.0 x 9.0 x 13.0
4.5 x 9.5 x 13.0
5.5 x 10.5 x 13.0
6.5 x 11.5 x 13.0
5.5 x 10.5 x 18.0
6.5 x 11.5 x 13.0
6.5 x 12.5 x 18.0
7.5 x 13.5 x 18.0
7.5 x 13.5 x 18.0
6.5 x 14.5 x 26.5
7.5 x 15.5 x 26.5
8.5 x 16.5 x 26.5
11.0 x 21.0 x 31.0
11.0 x 21.0 x 31.0
13.5 x 23.5 x 31.5
15.0 x 24.5 x 31.5
18.0 x 28.0 x 31.5
4.0 x 9.0 x 13.0
4.0 x 9.0 x 13.0
4.0 x 9.0 x 13.0
4.0 x 9.0 x 13.0
5.5 x 10.5 x 13.0
6.5 x 11.5 x 13.0
5.5 x 10.5 x 18.0
6.5 x 12.5 x 18.0
7.5 x 13.5 x 18.0
8.5 x 14.5 x 18.0
6.5 x 14.5 x 26.5
7.5 x 15.5 x 26.5
8.5 x 16.5 x 26.5
10.5 x 18.5 x 26.5
11.0 x 21.0 x 31.0
13.5 x 23.5 x 31.5
16.5 x 29.5 x 31.5
20.0 x 35.0 x 31.5
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
10.0
15.0
15.0
15.0
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
MKT1820210635
MKT1820215635
MKT1820222635
MKT1820233635
MKT1820247635
MKT1820268635
MKT1820310635
MKT1820315635
MKT1820322635
MKT1820333635M
MKT1820333635
MKT1820347635M
MKT1820347635
MKT1820368635
MKT1820410635M
MKT1820410635
MKT1820415635
MKT1820422635
MKT1820433635
MKT1820447635
MKT1820468635
MKT1820510635
MKT1820515635
MKT1820210105
MKT1820215105
MKT1820222105
MKT1820233105
MKT1820247105
MKT1820268105
MKT1820310105
MKT1820315105
MKT1820322105
MKT1820333105M
MKT1820333105
MKT1820347105
MKT1820368105
MKT1820410105
MKT1820415105
MKT1820422105
MKT1820433105
MKT1820447105
630
63
220
0.80
1000
10
220
0.80
0.15
0.22
0.33
0.47
Notes
(1)
For tolerances see chapter “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances”
Please replace “5” by: “4” for 5 % tolerance or “6” for 20 % tolerance
(2)
RECOMMENDED PACKAGING
PACKAGING
TYPE OF
HEIGHT (H) REEL DIAMETER/ ORDERING CODE
PITCH
10
PITCH
15
PITCH
PITCH
CODE
PACKAGING
(mm)
18.5
18.5
18.5
18.5
-
BOX SIZE (mm)
EXAMPLES
22.5 TO 27.5 37.5 TO 52.5
G
W
V
Ammo
Reel
55 x 210 x 340
MKT1820410405G
MKT1820410405W
MKT1820422635V
MKT1820422635G
MKT1820515405
x
x
-
x
x
x
-
-
-
-
-
-
-
x
350
Reel
500
x
x
x
G
-
Ammo
Bulk
60 x 360 x 510
-
-
x
x
Revision: 02-Feb-18
Document Number: 26011
7
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT1820
Vishay Roederstein
www.vishay.com
EXAMPLE OF ORDERING CODE
TYPE
CAPACITANCE CODE
VOLTAGE CODE
TOLERANCE CODE (1)
PACKAGING CODE
MKT1820
410
06
5
G
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoleers are designed for
mounting on printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to packaging information www.vishay.com/docs?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board.
• For pitches 15 mm the capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped
SPACE REQUIREMENTS FOR PRINTED-CIRCUIT BOARD APPLICATIONS AND DIMENSION
TOLERANCES
For the maximum product dimensions and maximum space requirements for length (Imax.), width (wmax.), and height (hmax.
following tolerances must be taken in account in the envelopment of the components as shown in the drawings below:
)
• For products with pitch 15 mm, w = l = 0.3 mm, and h = 0.1 mm
• For products with 15 mm < pitch 27.5 mm, w = l = 0.5 mm, and h = 0.1 mm
• For products with pitch = 37.5 mm, w = l = 0.7 mm, and h = 0.5 mm
• For products with pitch = 52.5 mm, w = l = 1.0 mm, and h = 0.5 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
wmax. = w + Δw
Eccentricity
CBA116
I
max. = I + ΔI
hmax. = h + Δh
Seating plane
For the minimum product dimensions for length (lmin.), width (wmin.), and height (hmin.) following tolerances of the components
are valid:
lmin. = l - l, wmin. = w - w, and hmin. = h - h following
• For products with pitch 10 mm, l = 0.3 mm, and w = h = 0.3 mm
• For products with pitch = 15 mm, l = 0.5 mm, and w = h = 0.5 mm
• For products with 15 mm < pitch 27.5 mm, l = 1.0 mm. and w = h = 0.5 mm
• For products with pitch = 37.5 mm, l = 1.0 mm, and w = h = 1.0 mm
• For products with pitch = 52.5 mm, l = 1.5 mm, and w = h = 1.0 mm
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C 1 °C, an atmospheric pressure
of 86 kPa to 106 kPa and a relative humidity of 50 % 2 %.
For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Revision: 02-Feb-18
Document Number: 26011
8
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT1820
Vishay Roederstein
www.vishay.com
CHARACTERISTICS
PERMISSIBLE AC VOLTAGE VS. FREQUENCY AT Tamb 85 °C
100
1000
Capacitance in µF
Capacitance in µF
7
7
5
5
3
2
3
2
10
7
100
7
5
5
3
3
2
2
63 VDC
250V
DC
1
1
102
2
3
5
7 103
2
3
5
7
104
2
3
5
7
105
f (Hz)
102
2
3
5
7
103
2
3
5
7
104
2
3
5
7 105
f (Hz)
1000
100
Capacitance in µF
7
5
Capacitance in μF
7
5
3
2
3
2
100
7
10
7
5
5
3
2
3
2
400 VDC
100 VDC
1
1
102
2
3
5
7 103
2
3
5
7
104
2
3
5
7
105
f (Hz)
102
2
3
5
7
103
2
3
5
7
104
2
3
5
7 105
f (Hz)
100
1000
Capacitance in µF
Capacitance in pF and µF
7
5
7
5
3
2
3
2
10
7
100
7
5
5
3
2
3
2
160 VDC
630 VDC
1
1
102
2
3
5
7 103
2
3
5
7
104
2
3
5
7
105
f (Hz)
102
2
3
5
7 103
2
3
5
7
104
2
3
5
7
105
f (Hz)
Revision: 02-Feb-18
Document Number: 26011
9
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT1820
Vishay Roederstein
www.vishay.com
CHARACTERISTICS
PERMISSIBLE AC VOLTAGE VS. FREQUENCY AT Tamb 85 °C
1000
Capacitance in pF and µF
7
5
3
2
1000
100
7
0.047
5
3
2
1000 VDC
1
102
2
3
5
7 103
2
3
5
7
104
2
3
5
7
105
f (Hz)
CHARACTERISTICS
1.2
12
10
8
1.0
0.8
0.6
0.4
0.2
0.0
6
4
2
0
-2
-4
-6
-8
- 60
- 10
40
90
140
-60 -40 -20
0
20
40
60
80
100 120 140
Tamb (°C)
Tamb (°C)
Capacitance vs. Temperature ΔC/C = f (ϑ)
Nominal voltage (AC and DC) as a function of temperature
Capacitance as a function of temperature
(typical curve)
2
16
1
0
14
12
10
8
-1
-2
-3
6
4
-4
-5
-6
2
0
102
2
3
5
7
103
2
3
5
7
104
2
3
5 7
105
-60 -40 -20
0
20
40
60
80
100 120 140
Tamb (°C)
ΔC
C
f (Hz)
= f (f)
Capacitance Change vs. Frequency
Dissipation Factor (1 kHz) vs. Temperature tan δ = f (ϑ)
Capacitance as a function of frequency
(typical curve)
Dissipation factor as a function of temperature
(typical curve)
Revision: 02-Feb-18
Document Number: 26011
10
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT1820
Vishay Roederstein
www.vishay.com
105
104
103
102
100
7
5
3
2
10
7
5
3
2
1
7
5
101
100
3
2
0.1
102
2
3
5
7 103
2
3
5
7 104
2
3
5
7 105
20
40
60
80
100
125
Tamb (°C)
Dissipation Factor vs. Frequency tan δ = f (f)
f (Hz)
Insulation resistance as a function of temperature
(typical curve)
Dissipation factor as a function of frequency
(typical curve)
16
14
12
10
8
6
4
2
0
-60 -40 -20
0
20
40
60
80 100 120 140
Tamb (°C)
Maximum allowed component temperature rise (T)
as function of ambient temperature (Tamb
)
Revision: 02-Feb-18
Document Number: 26011
11
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT1820
Vishay Roederstein
www.vishay.com
HEAT CONDUCTIVITY (G) AS A FUNCTION OF CAPACITOR BODY THICKNESS IN mW/°C
HEAT CONDUCTIVITY (mW/°C)
Wmax.
(mm)
PITCH 10.0 mm
PITCH 15.0 mm
PITCH 22.5 mm
PITCH 27.5 mm
PITCH 37.5 mm
PITCH 52.5 mm
3.5
4.0
5.0
-
-
-
-
-
6.0
-
-
-
-
-
4.5
7.0
-
-
-
-
-
5.5
8.0
10.0
-
-
-
-
6.5
10.0
13.0
20.0
-
-
-
7.5
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
15.0
22.0
-
-
-
-
8.5
16.0
24.0
-
-
9.0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
32.0
-
-
-
10.5
11.0
11.5
12.5
13.0
13.5
15.0
16.5
18.0
18.5
20.0
21.0
21.5
24.0
25.0
30.0
35.0
30.0
-
-
-
38.0
38.0
-
-
-
-
-
-
34.0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
45.0
45.0
50.0
58.0
60.0
-
-
-
-
-
-
-
-
-
-
-
90.0
-
73.0
70.0
-
-
-
-
-
102.0
118.0
-
-
-
-
-
155.0
170.0
200.0
-
135.0
-
-
POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE
The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function
of the free air ambient temperature.
The component temperature rise (T) can be measured or calculated by T = P/G:
• T = component temperature rise (°C) with a maximum of 15 °C
• P = power dissipation of the component (mW)
• G = heat conductivity of the component (mW/°C)
MEASURING THE COMPONENT TEMPERATURE
A thermocouple must be attached to the capacitor body as in:
Thermocouple
The temperature is measured in unloaded (Tamb) and maximum loaded condition (TC).
The temperature rise is given by T = TC - Tamb
.
To avoid thermal radiation or convection, the capacitor must be tested in a closed area from air circulation.
Revision: 02-Feb-18
Document Number: 26011
12
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT1820
Vishay Roederstein
www.vishay.com
APPLICATION NOTE AND LIMITING CONDITIONS
These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as
described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic
interference suppression capacitors conforming the standards must be used.
To select the capacitor for a certain application, the following conditions must be checked:
1. The peak voltage (UP) shall not be greater than the rated DC voltage (URDC
)
2. The peak-to-peak voltage (UP-P) shall not be greater than the maximum (UP-P) to avoid the ionization inception level
3. The voltage peak slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without
ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URDC and
divided by the applied voltage.
For all other pulses following equation must be fulfilled:
T
2
dU
dt
dU
2 x
------- x dt UNDC x -------
dt
rated
0
T is the pulse duration.
4. The maximum component surface temperature rise must be lower than the limits (see graph “Max. allowed component
temperature rise”).
5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor
breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values
mentioned in the table: “Heat conductivity”
6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected
with an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes
and surge voltages from the mains included).
7. For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For
information depending of the capacitance value and the number of parallel connections contact dc-film@vishay.com.
VOLTAGE CONDITIONS FOR 6 ABOVE
ALLOWED VOLTAGES
Tamb 85 °C
URAC
85 °C < Tamb 100 °C
0.8 x URAC
100 °C < Tamb 125 °C
0.5 x URAC
Maximum continuous RMS voltage
Maximum temperature RMS-overvoltage (< 24 h)
Maximum peak voltage (VO-P) (< 2 s)
1.25 x URAC
1.6 x URDC
URAC
0.6 x URAC
1.3 x URDC
0.5 x URDC
Revision: 02-Feb-18
Document Number: 26011
13
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT1820
Vishay Roederstein
www.vishay.com
INSPECTION REQUIREMENTS
General Notes
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-2 and
Specific Reference Data”.
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
4.1 Dimensions (detail)
As specified in chapter “General Data” of this
specification
4.3.1 Initial measurements
Capacitance
Tangent of loss angle:
for C 1 μF at 10 kHz
for 1 μF < C < 100 μF at 1 kHz
for C 100 μF at 100 Hz
4.3 Robustness of terminations
4.4 Resistance to soldering heat
Tensile and bending
No visible damage
Method: 1A
Solder bath: 280 °C 5 °C
Duration: 10 s
4.14 Component solvent resistance
4.4.2 Final measurements
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min 0.5 min
Recovery time: min. 1 h, max. 2 h
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| 2 % of the value measured initially
Tangent of loss angle
Increase of tan :
0.003 for C 1 μF or
0.002 for C > 1 μF
0.004 for C 100 μF
Compared to values measured in 4.3.1
SUB-GROUP C1B PART OF SAMPLE
OF SUB-GROUP C1
4.6.1 Initial measurements
4.6 Rapid change of temperature
4.7 Vibration
Capacitance
Tangent of loss angle:
for C 1 μF at 10 kHz
for 1 μF < C < 100 μF at 1 kHz
for C 100 μF at 100 Hz
A = -55 °C
B = +125 °C
5 cycles
Duration t = 30 min
Visual examination
No visible damage
Legible marking
Mounting:
see section “Mounting” of this specification
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/sꢀ
(whichever is less severe)
Total duration 6 h
4.7.2 Final inspection
4.9 Shock
Visual examination
No visible damage
Mounting:
see section “Mounting” for more information
Pulse shape: half sine
Acceleration: 490 m/sꢀ
Duration of pulse: 11 ms
Revision: 02-Feb-18
Document Number: 26011
14
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT1820
Vishay Roederstein
www.vishay.com
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1B PART OF SAMPLE
OF SUB-GROUP C1
4.9.3
Final measurements
Visual examination
No visible damage
Capacitance
|C/C| 5 % of the value measured in 4.6.1
Tangent of loss angle
Increase of tan :
for C 1 μF at 10 kHz
0.003 for C 1 μF or
0.002 for C > 1 μF
for 1 μF < C < 100 μF at 1 kHz
for C 100 μF at 100 Hz
0.004 for C 100 μF
Compared to values measured in 4.6.1
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1 COMBINED SAMPLE
OF SPECIMENS OF SUB-GROUPS
C1A AND C1B
4.10
Climatic sequence
4.10.2 Dry heat
Temperature: +125 °C
Duration: 16 h
4.10.3 Damp heat cyclic
Test Db, first cycle
4.10.4 Cold
Temperature: -55 °C
Duration: 2 h
4.10.6 Damp heat cyclic
Test Db, remaining cycles
4.10.6.2 Final measurements
Voltage proof = URDC for 1 min within 15 min
after removal from testchamber
No breakdown or flashover
Visual examination
Capacitance
No visible damage
Legible marking
|C/C| 5 % of the value measured in
4.4.2 or 4.9.3
Tangent of loss angle
Increase of tan :
for C 1 μF at 10 kHz
0.005 for C 1 μF or
0.003 for C > 1 μF
0.004 for C 100 μF
Compared to values measured in
4.3.1 or 4.6.1
for 1 μF < C < 100 μF at 1 kHz
for C 100 μF at 100 Hz
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C2
4.11
Damp heat steady state
56 days; 40 °C; 90 % to 95 % RH
4.11.1 Initial measurements
Capacitance
Tangent of loss angle
for C 1 μF at 10 kHz
for 1 μF < C < 100 μF at 1 kHz
for C 100 μF at 100 Hz
Voltage proof = URDC for 1 min within 15 min
after removal from testchamber
No breakdown or flashover
4.11.3 Final measurements
Visual examination
No visible damage
Legible marking
Revision: 02-Feb-18
Document Number: 26011
15
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT1820
Vishay Roederstein
www.vishay.com
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C2
CONDITIONS
PERFORMANCE REQUIREMENTS
4.11.3 Final measurements
Capacitance
|C/C| 5 % of the value measured in 4.11.1.
Tangent of loss angle
Increase of tan
for C 1 μF at 10 kHz
0.005 for C 1 μF or
for 1 μF < C < 100 μF at 1 kHz
for C 100 μF at 100 Hz
0.003 for C > 1 μF
0.004 for C 100 μF
Compared to values measured in 4.11.1
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C3
4.12 Endurance
Duration: 2000 h
1.25 x URDC at 85 °C
1.0 x URDC at 100 °C
0.6 x URDC at 125 °C
Duration: 200 h
0.3 x URDC at 150 °C
(not applicable for pitch 37.5 mm)
4.12.1 Initial measurements
4.12.5 Final measurements
Capacitance
Tangent of loss angle:
for C 1 μF at 10 kHz
for 1 μF < C < 100 μF at 1 kHz
for C 100 μF at 100 Hz
Visual examination
Capacitance
No visible damage
Legible marking
|C/C| 5 % compared to values measured
in 4.12.1
Tangent of loss angle
Increase of tan :
For C 1 μF at 10 kHz
0.003 for C 1 μF or
For 1 μF < C < 100 μF at 1 kHz
For C 100 μF at 100 Hz
0.002 for 1 μF < C < 100 μF
0.004 for C 100 μF
Compared to values measured in 4.12.1
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C4
4.13 Charge and discharge
10 000 cycles
Charged to URDC
Discharge resistance:
UR
R = ------------------------------------------------
C x K x dU dtR
K = 5 for pitch 27.5 mm
K = 1.5 for pitch 37.5 mm/52.5 mm
4.13.1 Initial measurements
4.13.3 Final measurements
Capacitance
Tangent of loss angle:
for C 1 μF at 10 kHz
for 1 μF < C < 100 μF at 1 kHz
for C 100 μF at 100 Hz
Capacitance
|C/C| 3 % compared to values measured
in 4.13.1
Tangent of loss angle:
Increase of tan :
0.003 for C 1 μF or
0.002 for C > 1 μF
0.004 for C 100 μF
Compared to values measured in 4.13.1
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification
Revision: 02-Feb-18
Document Number: 26011
16
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号：
MKT1820610/014
CAPACITOR, METALLIZED FILM, POLYESTER, 100 V, 10 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
MKT1820610/015-G
CAPACITOR, METALLIZED FILM, POLYESTER, 100 V, 10 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
MKT1820610/064-F
CAPACITOR, METALLIZED FILM, POLYESTER, 63 V, 10 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
MKT1820610/064-G
CAPACITOR, METALLIZED FILM, POLYESTER, 63 V, 10 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
MKT1820610015
Film Capacitor, Polyester, 100V, 10% +Tol, 10% -Tol, 10uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
VISHAY
MKT1820610065
Film Capacitor, Polyester, 63V, 10% +Tol, 10% -Tol, 10uF, Through Hole Mount, 7133, RADIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明