MLV0402E30403T [VISHAY]
RESISTOR, VOLTAGE DEPENDENT, 5.6 V, 0.05 J, SURFACE MOUNT, CHIP, 0402, ROHS COMPLIANT;
| 型号： | MLV0402E30403T |
| 厂家： | 
VISHAY |
| 描述： | RESISTOR, VOLTAGE DEPENDENT, 5.6 V, 0.05 J, SURFACE MOUNT, CHIP, 0402, ROHS COMPLIANT 电阻器 |
| 文件： | 总3页 (文件大小：81K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MLV0402E3
Vishay BCcomponents
www.vishay.com
SMD 0402 Multilayer Varistor
FEATURES
• Surface mount multilayer surge suppressor
• Inherent bidirectional clamping
• Excellent energy/volume ratio
• Suitable for reflow soldering
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
Over-voltage and transient voltage protection:
• Data lines and I/O port protection
• Protection against ESD transients
• On-board protection of IC’s and transistors
• Modem protection
QUICK REFERENCE DATA
PARAMETER
VALUE
UNIT
Maximum continuous voltage
DC
AC
5.6 to 18.0
4.0 to 14.0
V
V
• LCD protection
Maximum clamping voltage
15.5 to 40
90 to 360
V
at 1 A
DESCRIPTION
Capacitance range
(at 1 MHz)
Size 0402 (1005M) multilayer chip varistor with NiSn
terminations.
pF
Maximum energy (10/1000 μs)
Maximum peak current
Operating temperature range
Weight
0.05
20
J
A
PACKAGING
-55 to 125
0.0015
°C
g
Available in 8 mm paper tape, component pitch 4 mm on
180 mm reels containing 10 000 pieces.
ELECTRICAL DATA AND ORDERING INFORMATION
MAXIMUM
TYPICAL
BREAKDOWN
WORKING VOLTAGE
CLAMPING
VOLTAGE
PART NUMBER
VOLTAGE
CAPACITANCE
VRMS
V
VDC
V
Vb
V
VC
V
C
pF
SAP
MLV0402E3
< 10 μA
1 mA
1 A, 8/20 μs
1 MHz
4.0
7.0
5.6
9.0
7.1 to 9.3
11.0 to 14.0
16.0 to 20.0
23.0 to 28.0
15.5
20.0
30.0
40.0
360
230
120
90
0403T
0703T
1103T
1403T
11.0
14.0
14.0
18.0
Notes
•
Sinusoidal voltage assumed as normal operating condition.
If a non-sinusoidal voltage is present, the crest voltage x 0.707 should be used for type selection.
Breakdown voltage at a current of 1 mA, measured according to 4.5 of IEC 61051-1.
Parts are not recommended for automotive applications.
•
•
Revision: 22-Apr-15
Document Number: 29107
1
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MLV0402E3
Vishay BCcomponents
www.vishay.com
DIMENSIONS in millimeters
L1
W
T
L2 and L3
1.0 0.1
0.5 0.1
0.6 max.
0.25 0.15
T
W
L2
L4
L1
L3
RECOMMENDED FOOTPRINT in millimeters
C
A
B
C
0.7
0.7
2.0
A
B
V/I CHARACTERISTICS
Max. clamping voltage
Max. leakage current
100
014
011
007
004
10
1
0.00001
0.0001
0.001
0.01
0.1
1
10
100
CURRENT (A)
Revision: 22-Apr-15
Document Number: 29107
2
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号：
MLV0402E30703T
RESISTOR, VOLTAGE DEPENDENT, 9 V, 0.05 J, SURFACE MOUNT, CHIP, 0402, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明