MMA0204TD2403DB000 [VISHAY]
RESISTOR, THIN FILM, 0.25 W, 0.5 %, 25 ppm, 240000 ohm, SURFACE MOUNT, 0204, MELF, GREEN PRODUCT;型号: | MMA0204TD2403DB000 |
厂家: | VISHAY |
描述: | RESISTOR, THIN FILM, 0.25 W, 0.5 %, 25 ppm, 240000 ohm, SURFACE MOUNT, 0204, MELF, GREEN PRODUCT |
文件: | 总12页 (文件大小:179K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MMA 0204 HT - Professional
Vishay Beyschlag
Professional High Temperature MELF Resistors
FEATURES
• Operating temperature 175 °C for 1000 h
• Advanced thin film technology
• Excellent overall stability: Exceeds class 0.25
• AEC-Q200 compliant
• Approval to EN 140401-803
• Pure Sn termination on Ni barrier layer
• Green product, supports lead (Pb)-free soldering,
RoHS compliant
APPLICATIONS
• Automotive
MMA 0204 professional High Temperature MELF resistors
are the perfect choice for most fields of modern professional
electronics where high operating temperatures, power rating,
reliability and stability is of major concern. These improved
properties are enabled by a modified resistive film material.
The typical applications in the fields of automotive
telecommunication and medical equipment reflect the
outstanding level of proven reliability.
• Telecommunication
• Industrial
• Medical equipment
METRIC SIZE
DIN:
0204
CECC:
RC 3715M
TECHNICAL SPECIFICATIONS
DESCRIPTION
MMA 0204 HT
CECC size
RC 3715M
Resistance range
Resistance tolerance
Temperature coefficient
47 Ω to 332 kΩ
1 %; 0.5 %
50 ppm/K; 25 ppm/K
0.5 W
(1)
Rated dissipation, P70
Operating voltage, Umax. AC/DC
Permissible film temperature (2)
Insulation voltage
1 min; Uins
200 V
175 °C
300 V
75 V
continuous
FITobserved
≤ 0.1 x 10-9/h
Notes
(1) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
(2) Please refer to APPLICATION INFORMATION below
** Please see document “Vishay Green and Halogen-Free Definitions (5-2008)” http://www.vishay.com/doc?99902
www.vishay.com
12
For technical questions, contact: filmresistors.melf@vishay.com
Document Number: 28780
Revision: 28-Oct-08
MMA 0204 HT - Professional
Professional High Temperature
Vishay Beyschlag
MELF Resistors
APPLICATION INFORMATION
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support
of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not
exceeded.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime. At the maximum permissible film temperature of 175 °C the useful lifetime is specified for 1000 h. The
designer may estimate the performance of the particular resistor application or set certain load and temperature limits in order to
maintain a desired stability.
MAXIMUM RESISTANCE CHANGE AT RATED POWER
DESCRIPTION
MMA 0204 HT
RC3715M
Power
Metric size
Operation mode
Standard
P70 = 0.25 W
125 °C
High Temperature
P70 = 0.5 W
175 °C
Rated power
P70 = 0.4 W
155 °C
Film temperature
Max. resistance change at P70 for resistance range:
47 Ω to 332 kΩ
≤ 0.15 %
≤ 0.35 %
-
ΔR/R max., after:
1000 h
8000 h
≤ 0.10 %
≤ 0.15 %
≤ 1.0 %
≤ 0.25 %
-
-
225 000 h
Document Number: 28780
Revision: 28-Oct-08
For technical questions, contact: filmresistors.melf@vishay.com
www.vishay.com
13
MMA 0204 HT - Professional
Professional High Temperature
Vishay Beyschlag
MELF Resistors
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: MMA0204TD5620DB300
PART NUMBER: MMA0204TZ0000ZB300
M
M
M
M
A
A
0
0
2
2
0
0
4
4
T
T
D
Z
5
0
6
0
2
0
0
0
D
Z
B
B
3
3
0
0
0
0
MODEL/SIZE SPECIAL CHARACTER
MMA0204 = HT
TCR
VALUE
TOLERANCE
PACKAGING (2)
SPECIAL
T
D = 25 ppm/K
C = 50 ppm/K
Z = Jumper
3 digit value
1 digit multiplier
Multiplier
9 = *10-1
D = 0.5 %
F = 1 %
Z = Jumper
B3
B0
up to 2 digits
00 = standard
0 = *100
1 = *101
2 = *102
3 = *103
4 = *104
5 = *105
PRODUCT DESCRIPTION: MMA 0204 - 25 0.5 % HT BL 562R
PRODUCT DESCRIPTION: MMA 0204 HT BL 0R0
MMA
MMA
0204
0204
- 25
-
0.5 %
-
HT
HT
BL
562R
0R0
BL
MODEL
SIZE
TCR
TOLERANCE
SPECIAL CHARACTER
PACKAGING (2)
RESISTANCE VALUE
MMA
0204
25 ppm/K
50 ppm/K
0.5 %
1 %
HT = High Temperature
BL
B0
562R = 562 Ω
0R0 = Jumper
Notes
• Products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER
PACKAGING
BLISTER TAPE ON REEL
ACC. IEC 60286-3
MODEL
DIAMETER
180 mm/7"
330 mm/13"
PIECES/REEL
3000
CODE
B3 = BL
B0
MMA 0204 HT
10 000
www.vishay.com
14
For technical questions, contact: filmresistors.melf@vishay.com
Document Number: 28780
Revision: 28-Oct-08
MMA 0204 HT - Professional
Professional High Temperature
Vishay Beyschlag
MELF Resistors
DIMENSIONS
L
K
L1
D1
D
DIMENSIONS - MELF resistor types, mass and relevant physical dimensions
L
D
(mm)
L1 min.
(mm)
D1
(mm)
K
(mm)
MASS
(mg)
TYPE
(mm)
MMA 0204 HT
3.6 + 0/- 0.2
1.4 + 0/- 0.1
1.8
D + 0/- 0.15
0.8 0.1
19
Note
• Color code marking is applied according to IEC 60062* in four bands (E24 series) or five bands (E96 or E192 series). Each colour band appears
as a single solid line, voids are permissible if at least 2/3 of the band is visible from each radial angle of view. The last colour band for tolerance
is approximately 50 % wider than the other bands. An interrupted yellow band between the 4th and 5th full band indicates the temperature
coefficient of 25 ppm/K.
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
DESCRIPTION
RESISTANCE VALUE
MMA 0204 HT
TCR
TOLERANCE
1 %
47 Ω to 332 kΩ
47 Ω to 332 kΩ
50 ppm/K
0.5 %
1 %
47 Ω to 332 kΩ
25 ppm/K
0.5 %
47 Ω to 332 kΩ
≤ 10 mΩ, Imax. = 3 A
Jumper
Resistance ranges printed in bold are preferred TCR/tolerance combinations.
Note
• Resistance values to be selected for 5 % and 2 % tolerance from E24, for 1 % tolerance from E24 and E96 and for 0.5 % tolerance
from E24 and E192.
Document Number: 28780
Revision: 28-Oct-08
For technical questions, contact: filmresistors.melf@vishay.com
www.vishay.com
15
MMA 0204 HT - Professional
Professional High Temperature
Vishay Beyschlag
MELF Resistors
DESCRIPTION
APPROVALS
Production is strictly controlled and follows an extensive
set of instructions established for reproducibility.
The resistors are approved within the IECQ-CECC Quality
Assessment System for Electronic Components to the detail
specification EN 140401-803 which refers to EN 60115-1,
EN 140400 and the variety of environmental test procedures
of the IEC 60068* series.
A
homogeneous film of metal alloy is deposited on a high grade
ceramic body (Al2O3) and conditioned to achieve the desired
temperature coefficient. Nickel plated steel termination caps
are firmly pressed on the metallised rods. A special laser is
used to achieve the target value by smoothly cutting a helical
groove in the resistive layer without damaging the ceramics.
The resistor elements are covered by a protective coating
designed for electrical, mechanical and climatic protection.
The terminations receive a final pure tin on nickel plating.
Four or five colour code rings designate the resistance value
Conformity is attested by the use of the CECC Logo (
) as
the mark of conformity on the package label.
Vishay BEYSCHLAG has achieved “Approval of
Manufacture” in accordance with IEC QC 001002-3,
clause 2. The release certificate for “Technology Approval
Schedule” in accordance with CECC 240001 based on
IEC QC 001002-3, clause 6 is granted for the Vishay
BEYSCHLAG manufacturing process.
and tolerance in accordance with IEC 60062 (3)
.
The result of the determined production is verified by an
extensive testing procedure performed on 100 % of the
individual resistors. Only accepted products are laid directly
into the blister tape in accordance with IEC 60286-3 (3) or
RELATED PRODUCTS
This product family of thin film MELF High Temperature
resistors is complemented by Zero Ohm Jumpers.
bulk case in accordance with IEC 60286-6 (3)
.
A wider range of TCR, tolerance and resistance values, plus
the option of values from a different E series is available with
products approved to EN 140401-803, Version A, without
established reliability, nominal failure rate level E0 (Quality
factor πQ = 3). See the datasheets:
ASSEMBLY
The resistors are suitable for processing on automatic
SMD assembly systems. They are suitable for automatic
soldering using wave, reflow or vapour phase as shown in
IEC 61760-1 (3). The encapsulation is resistant to all
cleaning solvents commonly used in the electronics
industry, including alcohols, esters and aqueous solutions.
The suitablility of conformal coatings, if applied, shall be
qualified by appropiate means to ensure the long-term
stability of the whole system. The resistors are RoHS
compliant, the pure tin plating provides compatibility with
lead (Pb)-free and lead containing soldering processes. The
immunity of the plating against tin whisker growth has been
proven under extensive testing.
• “Professional MELF Resistors”, document no. 28713
• “Precision MELF Resistors”, document no. 28714
• “High Precision MELF Resistor”, document no. 28715
(1)
All products comply with the GADSL
CEFIC-EECA-EICTA
and the
(2)
list of legal restrictions on
hazardous substances. This includes full compliance with
the following directives:
• 2000/53/EC End of Vehicle life Directive (ELV) and
Annex II (ELV II)
• 2002/95/EC Restriction of the use of Hazardous
Substances Directive (RoHS)
• 2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
Solderability is specified for 2 years after production or
requalification. The permitted storage time is 20 years.
Notes
(1) Global Automotive Declarable Substance List, see www.gadsl.org
(2) CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade
organisation representing the information and communications technology and consumer electronics), see www.eicta.org → issue →
environment policy → chemicals → chemicals for electronics
(3) The quoted IEC standards marked with an asterisk (*) are also released as EN standards with the same number and identical contents
www.vishay.com
16
For technical questions, contact: filmresistors.melf@vishay.com
Document Number: 28780
Revision: 28-Oct-08
MMA 0204 HT - Professional
Professional High Temperature
Vishay Beyschlag
MELF Resistors
FUNCTIONAL PERFORMANCE
0.6
0.5
0.4
0.3
0.2
0.1
0
High Temperature
Power
Standard
0
25
50
100
125
150
175
70
Tamb [°C]
Derating for Operation Modes
P
100
W
10
1
0.1
10 µs
100 µs
1 ms
10 ms
100 ms
1 s
Pulse Duration ti
0 and n ≤ 1000 and U ≤ Umax.
for permissible resistance change equivalent to 8000 h operation
10 s
Maximum pulse load, single pulse; applicable if P
;
Single Pulse
P
100
W
10
1
0.1
10 µs
100 µs
1 ms
10 ms
100 ms
1 s
10 s
Pulse Duration ti
Maximum pulse load, continuous pulses; applicable if P ≤ P ( amb) and U ≤ Umax.
;
for permissible resistance change equivalent to 8000 h operation
Continuous Pulse
Document Number: 28780
Revision: 28-Oct-08
For technical questions, contact: filmresistors.melf@vishay.com
www.vishay.com
17
MMA 0204 HT - Professional
Professional High Temperature
Vishay Beyschlag
MELF Resistors
U
100 V
10 µs
100 µs
1 ms
10 ms
100 ms
1 s
Pulse Duration ti
10 s
Maximum pulse voltage, single and continuous pulses; applicable if P ≤ Pmax.
;
for permissible resistance change equivalent to 8000 h operation
Pulse Voltage
U
10 kV
1 kV
100 V
10 V
10 Ω
100 Ω
1 kΩ
10 kΩ
100 kΩ
1 MΩ
10 MΩ
Resistance Value R
Pulse load rating in accordance with IEC 60 115-1, 4.27; 1.2 µs/50 µs;
5 pulses at 12 s intervals; for permissible resistance change 0.5 %
1.2/50 Pulse
U
10 kV
1 kV
100 V
10 V
10 Ω
100 Ω
1 kΩ
10 kΩ
100 kΩ
1 MΩ
10 MΩ
Resistance Value R
Pulse load rating in accordance with IEC 60 115-1, 4.27; 10 µs/700 µs;
10 pulses at 1 min intervals; for premissible resistance change 0.5 %
10/700 Pulse
www.vishay.com
18
For technical questions, contact: filmresistors.melf@vishay.com
Document Number: 28780
Revision: 28-Oct-08
MMA 0204 HT - Professional
Professional High Temperature
Vishay Beyschlag
MELF Resistors
1
µV/V
0.1
0.01
100
Ω
1 k
Ω
10 k
Ω
100 kΩ
1 M
Ω
10 MΩ
Resistance Value
R
In accordance with IEC 60195
Current Noise - A1
1.8
1.5
1.0
0.5
0.1
0.3
3
1
GHz
Frequency
f
|Z|/R for 49.9 Ω MELF resistors
RF - Behaviour
TEST AND REQUIREMENTS
All tests are carried out in accordance with the following
specifications:
Unless otherwise specified the following values apply:
Temperature: 15 °C to 35 °C
EN 60115-1, generic specification
EN 140400, sectional specification
EN 140401-803, detail specification
Relative humidity: 45 % to 75 %
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).
The components are mounted for testing on printed-circuit
boards in accordance with EN 140400, 2.3.3, unless
otherwise specified.
The resistors are approved within the IECQ-CECC Quality
Assessment System for Electronic Components. For the full
test schedule refer to the documents listed above. The
testing also covers most of the requirements specified by
EIA/IS-703 and JIS-C-5202.
The requirements stated in the Test Procedures and
Requirements table are based on the required tests and
permitted limits of EN 140401-803. However, some
additional tests and a number of improvements against those
minimum requirements have been included. The stated
requirements for long-term tests are typically fulfilled with a
statistical safety of at least x + 5 s.
The tests are carried out in accordance with IEC 60068* and
under standard atmospheric conditions in accordance with
IEC 60068-1, 5.3*. Climatic category LCT/UCT/56 (rated
temperature range: Lower Category Temperature, Upper
Category Temperature; damp heat, long term, 56 days) is valid.
Document Number: 28780
Revision: 28-Oct-08
For technical questions, contact: filmresistors.melf@vishay.com
www.vishay.com
19
MMA 0204 HT - Professional
Professional High Temperature
Vishay Beyschlag
MELF Resistors
TEST PROCEDURES AND REQUIREMENTS
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR)
IEC
EN
60068-2
60115-1
CLAUSE
TEST
PROCEDURE
STABILITY
CLASS 0.25
OR BETTER
TEST
METHOD
Stability for product types:
MMA 0204 HT
47 Ω to 332 kΩ
1 % R;
0.5 % R
4.5
-
-
Resistance
-
At 20/- 55/20 °C
and
4.8.4.2
Temperature coefficient
50 ppm/K; 25 ppm/K
20/155/20 °C
U = P70 x R ≤ Umax.
1.5 h on; 0.5 h off;
;
;
;
Endurance at 70 °C:
Standard operation mode
70 °C; 1000 h
70 °C; 8000 h
(0.10 % R + 10 mΩ)
(0.20 % R + 10 mΩ)
U = P70 x R ≤ Umax.
1.5 h on; 0.5 h off;
4.25.1
-
Endurance at 70 °C:
Power operation mode
70 °C; 1000 h
70 °C; 8000 h
(0.15 % R + 10 mΩ)
(0.35 % R + 10 mΩ)
U = P70 x R ≤ Umax.
1.5 h on; 0.5 h off;
70 °C; 1000 h
Endurance at 70 °C:
High temperature mode
(0.25 % R + 10 mΩ)
125 °C; 1000 h
155 °C; 1000 h
175 °C; 1000 h
(0.05 % R + 5 mΩ)
(0.15 % R + 5 mΩ)
(0.25 % R + 5 mΩ)
4.25.3
Endurance at upper
category temperature
-
(40 2) °C;
56 days;
U = 0.3 x Urated
Damp heat, steady state
(standard mode)
4.24
4.39
78 (Cab)
67 (Cy)
(0.15 % R + 10 mΩ)
(0.25 % R + 10 mΩ)
;
(93 3) % RH
(85 2) °C;
Damp heat, steady state,
accelerated
(85 5) % RH;
U = 0.3 x Urated
1000 h
;
(standard mode)
4.23
Climatic sequence:
Dry heat
4.23.2
2 (Ba)
UCT; 16 h
55 °C; 24 h;
≥ 90 % RH;
1 cycle
4.23.3
30 (Db)
Damp heat, cyclic
4.23.4
4.23.5
1 (Aa)
13 (M)
Cold
LCT; 2 h
8.5 kPa; 2 h;
(25 10) °C
(0.15 % R + 10 mΩ)
Low air pressure
55 °C; 24 h;
≥ 90 % RH;
5 cycles
4.23.6
4.23.7
30 (Db)
-
Damp heat, cyclic
D.C. load
U = P70 x R ≤ Umax.; 1 min
(High temperature mode)
LCT = - 55 °C;
UCT = 155 °C
-
1 (Aa)
Cold
- 55 °C; 2 h
(0.05 % R + 5 mΩ)
www.vishay.com
20
For technical questions, contact: filmresistors.melf@vishay.com
Document Number: 28780
Revision: 28-Oct-08
MMA 0204 HT - Professional
Professional High Temperature
Vishay Beyschlag
MELF Resistors
TEST PROCEDURES AND REQUIREMENTS
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR)
IEC
60068-2
TEST
EN
60115-1
CLAUSE
TEST
PROCEDURE
STABILITY
CLASS 0.25
OR BETTER
METHOD
Stability for product types:
MMA 0204 HT
47 Ω to 332 kΩ
30 min at LCT;
30 min at UCT;
LCT = - 55 °C;
UCT = 125 °C
Rapid change
of temperature
5 cycles
(0.05 % R + 10 mΩ)
(0.15 % R + 10 mΩ)
4.19
14 (Na)
1000 cycles
LCT = - 55 °C;
UCT = 155 °C
1000 cycles
(0.25 % R + 10 mΩ)
(0.03 % R + 5 mΩ)
Short time overload:
Standard operation mode
4.13
4.27
-
-
U = 2.5 x P70 x R ≤ 2 x Umax.; 5 s
Severity no. 4:
Single pulse high voltage
overload;
U = 10 x P70 x R ≤ 2 x Umax.
10 pulses
;
(0.25 % R + 5 mΩ)
(0.5 % R + 5 mΩ)
Standard operation mode
10 µs/700 µs
U =
≤ 2 x Umax.;
15 x P70 x R
Periodic electric overload;
Standard operation mode
4.37
4.22
4.40
-
6 (Fc)
-
0.1 s on; 2.5 s off;
1000 cycles
Endurance by sweeping;
10 to 2000 Hz;
No resonance;
Amplitude
Vibration
(0.05 % R + 5 mΩ)
(0.5 % R + 50 mΩ)
≤ 1.5 mm or ≤ 200 m/s2; 6 h
IEC 61340-3-1*;
3 pos. + 3 neg. discharges
MMA 0204: 2 kV
Electrostatic discharge
(Human body model)
Solder bath method;
SnPb40;
Non-activated flux;
(215 3) °C;
(2 0.3) s
Good tinning (≥ 95 % covered); No
visible damage
4.17.2
58 (Td)
Solderability
Solder bath method;
SnAg3Cu0,5 or SnAg3,5;
Non-activated flux;
(235 3) °C;
Good tinning (≥ 95 % covered); No
visible damage
(2 0.3) s
Solder bath method;
(260 5) °C;
(10 1) s
(0.05 % R + 10 mΩ)
Resistance to
soldering heat
4.18.2
4.29
58 (Td)
45 (XA)
Reflow method 2
(IR/forced gas convection);
(260 5) °C;
(0.03 % R + 10 mΩ)
(40 1) s (3 times)
Component solvent
resistance
Isopropyl alcohol;
50 °C; method 2
No visible damage
Document Number: 28780
Revision: 28-Oct-08
For technical questions, contact: filmresistors.melf@vishay.com
www.vishay.com
21
MMA 0204 HT - Professional
Professional High Temperature
Vishay Beyschlag
MELF Resistors
TEST PROCEDURES AND REQUIREMENTS
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR)
IEC
EN
60068-2
60115-1
CLAUSE
TEST
PROCEDURE
STABILITY
CLASS 0.25
OR BETTER
TEST
METHOD
Stability for product types:
MMA 0204 HT
47 Ω to 332 kΩ
Solvent resistance
of marking
Isopropyl alcohol;
50 °C; Method 1, toothbrush
Marking legible;
No visible damage
4.30
4.32
45 (XA)
21 (Ue3)
Shear
45 N
No visible damage
No visible damage, no open circuit in
bent position
4.33
21 (Ue1)
Substrate bending
Depth 2 mm, 3 times
Urms = Uins; 60 s
(0.05 % R + 5 mΩ)
4.7
-
-
Voltage proof
Flammability
No flashover or breakdown
IEC 60 695-11-5,
needle flame test; 10 s
4.35
No burning after 30 s
Notes
• The quoted IEC standards are also released as EN standards with the same number and identical contents
www.vishay.com
22
For technical questions, contact: filmresistors.melf@vishay.com
Document Number: 28780
Revision: 28-Oct-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
MMA0204TD2403FB000
RESISTOR, THIN FILM, 0.25 W, 1 %, 25 ppm, 240000 ohm, SURFACE MOUNT, 0204, MELF, GREEN PRODUCT
VISHAY
MMA0204TD2403FB300
RESISTOR, THIN FILM, 0.25 W, 1 %, 25 ppm, 240000 ohm, SURFACE MOUNT, 0204, MELF, GREEN PRODUCT
VISHAY
MMA0204TD2433DB300
RESISTOR, THIN FILM, 0.25 W, 0.5 %, 25 ppm, 243000 ohm, SURFACE MOUNT, 0204, MELF, GREEN PRODUCT
VISHAY
MMA0204TD2433FB300
RESISTOR, THIN FILM, 0.25 W, 1 %, 25 ppm, 243000 ohm, SURFACE MOUNT, 0204, MELF, GREEN PRODUCT
VISHAY
MMA0204TD2463DB000
RESISTOR, THIN FILM, 0.25 W, 0.5 %, 25 ppm, 246000 ohm, SURFACE MOUNT, 0204, MELF, GREEN PRODUCT
VISHAY
MMA0204TD2703FB000
RESISTOR, THIN FILM, 0.25 W, 1 %, 25 ppm, 270000 ohm, SURFACE MOUNT, 0204, MELF, GREEN PRODUCT
VISHAY
MMA0204TD2743DB000
RESISTOR, THIN FILM, 0.25 W, 0.5 %, 25 ppm, 274000 ohm, SURFACE MOUNT, 0204, MELF, GREEN PRODUCT
VISHAY
MMA0204TD2873DB300
RESISTOR, THIN FILM, 0.25 W, 0.5 %, 25 ppm, 287000 ohm, SURFACE MOUNT, 0204, MELF, GREEN PRODUCT
VISHAY
MMA0204TD3003DB300
RESISTOR, THIN FILM, 0.25 W, 0.5 %, 25 ppm, 300000 ohm, SURFACE MOUNT, 0204, MELF, GREEN PRODUCT
VISHAY
MMA0204TD3003FB300
RESISTOR, THIN FILM, 0.25 W, 1 %, 25 ppm, 300000 ohm, SURFACE MOUNT, 0204, MELF, GREEN PRODUCT
VISHAY
MMA0204TD3013DB000
RESISTOR, THIN FILM, 0.25 W, 0.5 %, 25 ppm, 301000 ohm, SURFACE MOUNT, 0204, MELF, GREEN PRODUCT
VISHAY
MMA0204TD3013FB000
RESISTOR, THIN FILM, 0.25 W, 1 %, 25 ppm, 301000 ohm, SURFACE MOUNT, 0204, MELF, GREEN PRODUCT
VISHAY
©2020 ICPDF网 联系我们和版权申明