MMBZ4617-V [VISHAY]
Small Signal Zener Diodes; 小信号齐纳二极管
| 型号： | MMBZ4617-V |
| 厂家： | 
VISHAY |
| 描述： | Small Signal Zener Diodes |
| 文件： | 总4页 (文件大小：96K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MMBZ4617-V to MMBZ4627-V
Vishay Semiconductors
Small Signal Zener Diodes
Features
• Silicon Planar Low Noise Zener Diodes.
3
• 350 mW high quality voltage regulator
designed for low leakage, low current and
low noise applications
e3
• 5 % Tolerance on V
Z
1
2
18078
• High temperature soldering guaranteed:
260 °C/4X10 seconds at terminals.
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
Mechanical Data
Case: SOT-23 Plastic case
Weight: approx. 8.8 mg
Terminals: Solderable per MIL-STD-750, method
2026
Packaging codes/options:
GS18 / 10 k per 13 " reel (8 mm tape), 10 k/box
GS08 / 3 k per 7 " reel (8 mm tape), 15 k/box
Absolute Maximum Ratings
Tamb = 25 °C, unless otherwise specified
Parameter
Power dissipation
Test condition
Symbol
Ptot
Value
Unit
3501)
1.1
mW
V
Forward voltage, maximum
Forward voltage, typical
IF = 200 mA
IF = 200 mA
VF
VF
0.97
V
1) On FR - 5 board using recommended solder pad layout
Thermal Characteristics
Tamb = 25 °C, unless otherwise specified
Parameter
Test condition
Symbol
Tj
Value
150
Unit
°C
Maximum junction temperature
Storage temperature range
TS
- 55 to + 150
4201)
°C
Thermal resistance junction to
ambient air
RthJA
°C/W
1) On FR - 5 board using recommended solder pad layout
Document Number 85770
Rev. 1.3, 14-Oct-05
www.vishay.com
1
MMBZ4617-V to MMBZ4627-V
Vishay Semiconductors
Electrical Characteristics
Zener1)
Voltage
Partnumber
Marking
Test
Current
Maximum
Zener
Maximum Reverse
Leakage Current
Maximum
Zener
Maximum
Noise
Code
Impedance
Current
Density
VZ @ IZT
IZT
ZZT @ IZT
IR
VR
IZM
ND @ IZT
250 μA
μV/√Hz
1.0
=
V
μA
Ω
μA
2.0
1.0
0.8
7.5
7.5
5.0
4.0
10
V
mA
95
90
85
80
75
70
65
60
55
50
45
MMBZ4617-V
MMBZ4618-V
MMBZ4619-V
MMBZ4620-V
MMBZ4621-V
MMBZ4622-V
MMBZ4623-V
MMBZ4624-V
MMBZ4625-V
MMBZ4626-V
MMBZ4627-V
G17
G18
G19
G20
G21
G22
G23
G24
G25
G26
G27
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
250
250
250
250
250
250
250
250
250
250
250
1400
1500
1600
1650
1700
1650
1600
1550
1500
1400
1200
1.0
1.0
1.0
1.5
2.0
2.0
2.0
3.0
3.0
4.0
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
10
2.0
10
4.0
10
5.0
Note: 1) VZ tested with 5 ms pulse
Package Dimensions in mm (Inches)
0.175 (.007)
0.098 (.005)
0.1 (.004) max.
2.6 (.102)
2.35 (.092)
0.4 (.016)
0.4 (.016)
ISO Method E
3.1 (.122)
Mounting Pad Layout
2.8 (.110)
0.52 (0.020)
0.4 (.016)
0.9 (0.035)
2.0 (0.079)
0.95 (.037)
0.95 (.037)
0.95 (0.037)
0.95 (0.037)
17418
www.vishay.com
2
Document Number 85770
Rev. 1.3, 14-Oct-05
MMBZ4617-V to MMBZ4627-V
Vishay Semiconductors
Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and operating
systems with respect to their impact on the health and safety of our employees and the public, as well as
their impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are
known as ozone depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs
and forbid their use within the next ten years. Various national and international initiatives are pressing for an
earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use
of ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments
respectively
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency (EPA) in the USA
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting
substances and do not contain such substances.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each
customer application by the customer. Should the buyer use Vishay Semiconductors products for any
unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all
claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal
damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Document Number 85770
Rev. 1.3, 14-Oct-05
www.vishay.com
3
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
MMBZ4617E8
DIODE 2.4 V, 0.35 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, Voltage Regulator Diode
VISHAY
MMBZ4617E9
DIODE 2.4 V, 0.35 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, Voltage Regulator Diode
VISHAY
MMBZ4618-E3-18
Zener Diode, 2.7V V(Z), 5%, 0.35W, Silicon, Unidirectional, ROHS COMPLIANT, PLASTIC PACKAGE-3
VISHAY
MMBZ4618-G3-08
Zener Diode, 2.7V V(Z), 5%, 0.35W, Silicon, Unidirectional, GREEN, PLASTIC PACKAGE-3
VISHAY
MMBZ4618-G3-18
Zener Diode, 2.7V V(Z), 5%, 0.35W, Silicon, Unidirectional, GREEN, PLASTIC PACKAGE-3
VISHAY
©2020 ICPDF网 联系我们和版权申明