MS21426-16ST [VISHAY]
General Purpose Inductor, 1.8uH, 10%, Iron-Core,;
| 型号： | MS21426-16ST |
| 厂家： | 
VISHAY |
| 描述： | General Purpose Inductor, 1.8uH, 10%, Iron-Core, |
| 文件： | 总3页 (文件大小：135K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MS21426
Vishay Dale
Inductors, Military, MIL-PRF-15305 Qualified, Type LT, Molded,
Shielded, Miniature, Axial Leaded
FEATURES
• Flame retardant coating
• Electromagnetic shield
• Small package for a shielded inductor
• Epoxy molded construction provides superior moisture
protection
• Precision performance, excellent reliability, sturdy
construction
ELECTRICAL SPECIFICATIONS
Inductance Tolerance: 10 ꢀ standard
INDUCTANCE RANGE AND MILITARY STANDARD
INDUCTANCE
CLASSIFICATION
MATERIAL
MILITARY
STANDARD
RANGE (μH)
Insulation Resistance: 1000 MΩ minimum per
MIL-STD-202, method 302, test condition B
FROM TO
GRADE CLASS CORE SHIELD
Powered Powered
Dielectric Withstanding Voltage: 200 VAC per
MS21426
1.2
100
1
A
Iron
Iron
MIL-STD-202, method 301 (sea level)
Percent Coupling: 3 ꢀ maximum per MIL-PRF-15305
Operating Temperature Range: - 55 °C to + 105 °C
ENVIRONMENTAL PERFORMANCE
TEST
CONDITIONS
SPECIFICATIONS
Barometric
Pressure
MIL-STD-202,
method 105
C
MECHANICAL SPECIFICATIONS
Terminal Strength: 3 pounds pull per MIL-STD-202,
method 211, test condition A except 180° rotation for a total
of 540 °C
Thermal
Shock
MIL-STD-202,
method 107
A-1
MIL-STD-202,
method 111
Flammability
Overload
-
-
Weight: 0.30 g maximum
MIL-PRF-15305
MIL-PRF-15305
Low Temperature
Storage
-
MATERIAL SPECIFICATIONS
Encapsulant: Epoxy
Resistance to
Soldering Heat
MIL-STD-202,
method 210
A
-
Standard Terminal: #24 AWG tinned copper
Resistance to
Solvents
MIL-STD-202,
method 215
TEST EQUIPMENT (1)
• H/P 4342A Q-meter
DIMENSIONS in inches [millimeters]
• Measurements corporation megacycle meter, model 59
• Wheatstone bridge
1.50 0.120
[38.10 3.05]
0.250 0.010
[6.35 0.254]
Note
(1)
Test procedures per MIL-PRF-15305
0.095 0.010
[2.41 0.254]
0.020 0.0015
[0.0508 0.038]
www.vishay.com
94
For technical questions, contact: magnetics@vishay.com
Document Number: 34188
Revision: 15-Jul-09
MS21426
Vishay Dale
Inductors, Military, MIL-PRF-15305 Qualified, Type LT, Molded,
Shielded, Miniature, Axial Leaded
STANDARD ELECTRICAL SPECIFICATIONS
TEST FREQ.
L AND Q
(MHz)
IND.
(μH)
TOL.
(%)
MILITARY
STANDARD
MILITARY
TYPE
Q
MIN.
SRF MIN. DCR MAX.
RATED DC CURRENT
(mA) (2)
MODEL
(MHz) (1)
(Ω)
LT10K
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
1.2
1.5
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
40
41
43
45
48
49
50
53
54
55
55
57
36
38
40
40
40
41
42
44
44
45
45
40
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
130
115
105
95
90
80
75
70
60
55
53
50
35
30
26
24
21
20
19
16
15
13
11
10.5
0.73
0.86
0.95
1.1
1.2
1.3
1.5
2.4
2.9
3.2
3.6
4.0
3.0
3.4
3.8
4.9
5.8
6.5
7.9
9.3
11
247
228
217
202
193
185
173
136
124
118
111
106
122
115
108
96
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
MS21426
10.0
12.0
15.0
18.0
22.0
27.0
33.0
39.0
47.0
56.0
68.0
82.0
100.0
88
83
75
69
64
12
61
13
59
16.8
51
Notes
(1)
Measured with full length lead
Rated DC current: Based on the maximum temperature rise not to exceed 15 °C at + 90 °C ambient
(2)
DESCRIPTION - MILITARY PART NUMBER
MS21426
-14
LT
10
K
531
MILITARY
STANDARD
INDUCTANCE
VALUE
OR
TYPE
GRADE AND CLASS
FAMILY
ID NUMBER
Note
•
Listing of military standard does not imply qualification. Contact factory for latest government QPL information
GLOBAL PART NUMBER
M
S
2
1
4
2
6
-
1
4
R
U
PRODUCT FAMILY
INDUCTANCE
VALUE
PACKAGE
CODE
Document Number: 34188
Revision: 15-Jul-09
For technical questions, contact: magnetics@vishay.com
www.vishay.com
95
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号：
MS21426-18RU
General Fixed Inductor, 1 ELEMENT, 2.7 uH, POWDERED IRON-CORE, GENERAL PURPOSE INDUCTOR, SMD, AXIAL LEADED
VISHAY
MS21426-19RU
General Fixed Inductor, 1 ELEMENT, 3.3 uH, POWDERED IRON-CORE, GENERAL PURPOSE INDUCTOR, SMD, AXIAL LEADED
VISHAY
MS21426-20
General Fixed Inductor, 1 ELEMENT, 3.9 uH, POWDERED IRON-CORE, GENERAL PURPOSE INDUCTOR, AXIAL LEADED
VISHAY
©2020 ICPDF网 联系我们和版权申明