MTLP [VISHAY]
Wire Bondable Thin Film Micro-Strip Transmission;型号: | MTLP |
厂家: | VISHAY |
描述: | Wire Bondable Thin Film Micro-Strip Transmission |
文件: | 总3页 (文件大小:74K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MTLP
Vishay Electro-Films
www.vishay.com
Wire Bondable Thin Film Micro-Strip Transmission
Line Resistor Arrays
FEATURES
• 50 micro-strip configuration
• Wire bondable terminations
• Alumina (99.6 %) substrate; as-fired or polished
APPLICATIONS
• Test and measurement setups
• Network analyzer calibration elements
• RF bread boarding
Product may not be to scale
• High frequency hybrid assemblies
MTLP series of thin film 50 micro-strip transmission lines
with two rows of tuning pads are designed for test and
measurement applications.
CUSTOM DESIGNED ELEMENTS
Vishay EFI will custom design additional geometries and
form factors upon request.
Standard configurations of the MTLP series include an array
of wire bondable terminations that allow integration of
discrete components.
Information about standard design rules can be found at
www.vishay.com/doc?49109
Custom configurations including open, short and load
element are available upon request.
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
VALUE
50
UNIT
Characteristic Impedance
Mechanical Tolerances
0.1 ( 4 ꢀm)
-55 to +125
mil
°C
Operating Temperature Range
DIMENSIONS in inches
0.0012"
(30 ꢀm)
0.005" square
(125 ꢀm square)
0.004"
(100 ꢀm)
Full ground plane
on back side
0.01" (250 ꢀm)
0.01"
(250 ꢀm)
0.03" (750 ꢀm)
LENGTH
WIDTH
THICKNESS
0.01 to 0.5
0.03 0.002
0.010 0.001
Revision: 16-Nov-17
Document Number: 61097
1
For technical questions, contact: efi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MTLP
Vishay Electro-Films
www.vishay.com
MECHANICAL SPECIFICATIONS
PARAMETER
VALUE
Substrate Thickness
Substrate Material
Metallization
10 mils 1 mils (as-fied) 0.5 mils (polished)
Alumina 99.6 %
TiW (750 250 Å)/Au (120 ꢀ" min.)
10 mils 0.1 mils
Micro-strip Line Width
Available Line Lengths
0.010" to 0.0500"
ORDERING INFORMATION
MTLP 300 P WS - 0.30" mil long transmission line on polished Alumina
MODEL
LENGTH
SURFACE FINISH
PACKAGING CODE
MTLP
XXX
010
015
020
055
090
300
F = As-fired
P = Polished
WS = 100 mult, 1 min.
Micro-strip transmission line with tuning pads
waffle pack
Revision: 16-Nov-17
Document Number: 61097
2
For technical questions, contact: efi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明