NOMCT16035001BT1 [VISHAY]

RESISTOR, NETWORK, FILM, ISOLATED, 0.5 W, SURFACE MOUNT, 1539, DIP, ROHS COMPLIANT;


型号：	NOMCT16035001BT1
厂家：	VISHAY
描述：	RESISTOR, NETWORK, FILM, ISOLATED, 0.5 W, SURFACE MOUNT, 1539, DIP, ROHS COMPLIANT 电阻器
文件：	总4页 (文件大小：129K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

NOMC

Vishay Dale Thin Film

www.vishay.com

Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor,

Narrow Body, Surface Mount Network

FEATURES

• Standard 14 pins and 16 pins counts

(0.150" narrow body) JEDEC MS-012

variation AB and AC

Available

• Rugged molded case construction

• Excellent long term ratio stability

(R 0.015 %)

Actual Size

• Low TCR tracking 5 ppm/°C

The NOMC series features a standard 14 pins and 16 pins

• Isolated and bussed schematics

narrow body (0.150") small outline surface mount style. It

can accommodate resistor networks to your particular

application requirements. The networks can be constructed

with passivated nichrome (standard), or tantalum nitride

resistor films to optimize performance.

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

Note

(1)

This datasheet provides information about parts that are

RoHS-compliant and / or parts that are non RoHS-compliant. For

example, parts with lead (Pb) terminations are not RoHS-compliant.

Please see the information / tables in this datasheet for details



Note



(1)

Available upon request. Resistance value range and

performance differs from passivated nichrome standard

electrical specifications on datasheet, consult factory

TYPICAL PERFORMANCE

ABSOLUTE

TRACKING

TCR

TOL.

ABSOLUTE

0.10

RATIO

0.05

SCHEMATICS

NOMC1401 or NOMCT1401

NOMC1601 or NOMCT1601

NOMC1403 or NOMCT1403

NOMC1603 or NOMCT1603

The 01 circuit provides a choice of 13 or 15 equal value

resistors each connected between a common lead (14 or

16). Custom schematics available.

The 03 circuit provides a choice of 7 or 8 equal value

resistors (14 or 16). Custom schematics available.

STANDARD RESISTANCE OFFERING (Equal Value Resistors)

ISOLATED (03) SCHEMATIC

BUSSED (01) SCHEMATIC

1 k

2 k

1 k

5 k

10 k

20 k

10 k

20 k

25 k

50 k

100 k

Note

• Consult factory for additional values

Revision: 25-Apr-17

Document Number: 60007

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

NOMC

Vishay Dale Thin Film

www.vishay.com

STANDARD ELECTRICAL SPECIFICATIONS

TEST

SPECIFICATIONS

CONDITIONS

Passivated nichrome (standard)

Tantalum nitride (available upon request)

Material

Pin/Lead Number

14, 16

100  to 50 k each resistor (bussed (01) schematic)

100  to 100 k each resistor (isolated (03) schematic)

25 ppm/°C (standard)

5 ppm/°C (typical)

Resistance Range

TCR: Absolute

- 55 °C to + 125 °C

+ 25 °C

TCR: Tracking

Tolerance: Absolute

Tolerance: Ratio

0.10 % to 1 %

0.025 % to 0.1 %

+ 25 °C

100 mW ((typical) (03) schematic)

50 mW ((01) schematic)

400 mW/500 mW

Power Rating: Resistor

Maximum at + 70 °C

Power Rating: Package

Stability: Absolute

Maximum at + 70 °C

R 0.05 %

2000 h at + 70 °C

Stability: Ratio

R 0.015 %

2000 h at + 70 °C

Voltage Coefficient

Working Voltage

< 0.1 ppm/V

100 V max. not to exceed P x R

- 55 °C to + 125 °C

Operating Temperature Range

Storage Temperature Range

Noise

- 55 °C to + 150 °C

 - 30 dB

Thermal EMF

0.08 μV/°C

Shelf Life Stability: Absolute

Shelf Life Stability: Ratio

R 0.01 %

1 year at + 25 °C

R 0.002 %

DIMENSIONS AND IMPRINTING in inches and millimeters

DIMENSION

INCHES MILLIMETERS INCHES MILLIMETERS

0.235

0.154

0.340

0.063

0.050

0.015

0.008

0.025

0.006

0.015

5.969

3.911

8.363

1.60

0.235

0.154

0.390

0.063

0.050

0.015

0.008

0.025

0.006

0.015

5.969

3.91

Index Area

PIN 1 Locator

9.906

1.60

1.270

0.381

0.203

0.635

0.152

0.381

1.270

0.381

0.203

0.635

0.152

0.381

h x 45°

A₁

MECHANICAL SPECIFICATIONS

Resistive Element

Passivated nichrome

Silicon

Substrate Material

Body

Molded epoxy

Copper alloy

100 % matte tin

Sn90

Terminals

Lead (Pb)-free Option

Tin Lead Option

Tin Lead and Lead (Pb)-free Finish

Plated

Note

•

Available upon request. Resistance value range and performance differs from passivated nichrome standard electrical specifications on

datasheet, consult factory

Revision: 25-Apr-17

Document Number: 60007

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

NOMC

Vishay Dale Thin Film

www.vishay.com

ORDERING INFORMATION CHECK LIST (Customs)

Special requirements should be identified in advance, but as a minimum, you should have the following information ready.

ELECTRICAL

1. Resistors, by value and tolerance

2. Reference resistor(s) and matching of which resistors to which

reference resistors

MECHANICAL

1. Maximum allowable seated height (from PC board to top of

network)

2. Special marking concerns

3. Reference by ratio

3. Schematic pin out of package

4. Absolute temperature coefficient of resistivity

5. Temperature tracking of subordinate resistors to reference

resistor(s)

6. Maximum operating voltage

7. Resistor power ratings

8. Operating temperature range

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: NOMC16031002BUF

GLOBAL MODEL

(4 or 5 digits)

TOLERANCE AND

RATIO TOLERANCE

PINS

SCHEMATIC

RESISTANCE

PACKAGING

NOMC

01 = 13 or 15

bussed

equal value

resistors

03 = 7 or 8

isolated

First 3 digits are

significant figures

and the last digit

specifies the number

of zeros to follow.

Abs. Tol.

Ratio



0.05 %

0.1 %

0.5 %

TAPE AND REEL

(Tin Lead)



T0 = 100 min., 100 mult

T1 = 1000 min., 1000 mult ⁽²⁾

T3 = 300 min., 300 mult

T5 = 500 min., 500 mult

TF = Full reel 2500

A = 0.1 % ⁽¹⁾

B = 0.1 %

C = 0.25 %

D = 0.5 %

F = 1 %



NOMCT

(Lead (Pb)-free)

(e3)

equal value

resistors

Example:

1002 = 10K

1003 = 100K

TS = 100 min., 1 mult

Z = 0.1 % ⁽¹⁾0.025 %

UF = TUBED

Historical Part Number example: NOMC16031002Z (for reference purposes only)

NOMC

1002

TOLERANCE AND

RATIO TOLERANCE

SERIES

PINS

SCHEMATIC

RESISTANCE

Notes

(1)

Tolerance available 1K and up

Preferred packaging code

(2)

Revision: 25-Apr-17

Document Number: 60007

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 08-Feb-17

Document Number: 91000

NOMCT16035001BT1 [VISHAY]

相关型号：

NOMCT16035001CT1

NOMCT16035001DT1

NOMCT16035001FT1

NOMC_08

NOMD107M006R0100

NOMD157M006R0050

NOMD227M004R0040

NOMD227M004R0060

NOMD477M002R0035

NOMD477M002R0055

NOMD477M002R0100

NOME157M010SWJ