OSOPA1003DTS [VISHAY]
Molded, 25 mil Pitch, Dual-In-Line Thin Film Resistor;
| 型号： | OSOPA1003DTS |
| 厂家： | 
VISHAY |
| 描述： | Molded, 25 mil Pitch, Dual-In-Line Thin Film Resistor 电阻器 |
| 文件： | 总3页 (文件大小：127K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
OSOP
Vishay Dale Thin Film
www.vishay.com
Molded, 25 mil Pitch, Dual-In-Line Thin Film Resistor,
Surface Mount Network
FEATURES
• 0.068" (1.73 mm) maximum seated height
• Rugged molded case construction with no
internal solder
• JEDEC® MO-137 variation AB = 16 pin,
AD = 20 pin, AE = 24 pin
Available
Available
• Material categorization:
for definitions of compliance please see
OSOP Series resistor networks feature a space saving
www.vishay.com/doc?99912
25 mil lead pitch versus the current 50 mil pitch standard.
This allows users to reduce board space more than 50 %
over current standards. The OSOP series features 16, 20,
and 24 pin variations with isolated and last pin common
schematics. Custom schematics and resistor values are
also available, consult factory.
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
TYPICAL PERFORMANCE
SCHEMATIC
ABSOLUTE
TRACKING
5
TCR
TOL.
25
ABSOLUTE
0.1
R1
R2
R3
R4
R5
R6
R7
R8
R9
R10 R11 R12
RATIO
0.05
OSOP 16 B
OSOP 20 A
OSOP 24 C
STANDARD RESISTANCE OFFERING (R1 =)
500
1 k
2 k
5 k
10 k
20 k
50 k
100 k
OSOP 16 E
OSOP 20 D
OSOP 24 F
Note
Consult factory for additional values and schematics
•
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
Passivated nichrome
16, 20, 24
CONDITIONS
Material
-
Pin / Lead Number
Resistance Range
TCR: Absolute
-
500 to 100 k per resistor
25 ppm/ꢀC
-
-55 ꢀC to +125 ꢀC
TCR: Tracking
5 ppm/ꢀC
-55 ꢀC to +125 ꢀC
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
0.1 % to 1 %
+25 ꢀC
0.025 % to 0.5 %
100 mW
+25 ꢀC
Maximum at +70 ꢀC
400 mW
Maximum at +70 ꢀC
R 0.05 %
R 0.015 %
2000 h at +70 ꢀC
2000 h at +70 ꢀC
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
< 0.1 ppm/V (typical)
100 V max. not to exceed P x R
-55 ꢀC to +125 ꢀC
-55 ꢀC to +150 ꢀC
< -30 dB
-
-
-
-
-
Thermal EMF
0.08 μV/ꢀC
-
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
R 0.01 %
R 0.002 %
1 year at +25 ꢀC
1 year at +25 ꢀC
Revision: 03-Mar-17
Document Number: 60002
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
OSOP
Vishay Dale Thin Film
www.vishay.com
DIMENSIONS AND IMPRINTING in inches and millimeters
DIMENSION
INCHES
MILLIMETERS
4.90
16 pin
0.193 0.003
0.341 0.003
0.154
A
20, 24 pin
8.66
A
B
3.91
J
E
Part
Number
Marking
D
C
D
E
F
G
H
I
0.237
6.02
Logo
0.025
0.635
C
0.010 0.002
0.062
0.25 0.05
1.58
B
PIN 1
Locator
I
0.068
1.73
F
Date
Code
0.010 0.002
0.025
0.25 0.05
0.64
H
G
16 pin
0.009
0.23
J
20 pin
24 pin
0.057
1.47
0.057
1.47
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome
Silicon
Substrate Material
Body
Molded epoxy
Copper alloy
100 % matte tin
Sn90
Terminals
Lead (Pb)-free Option
Tin Lead Option
Tin Lead and Lead (Pb)-free Finish
Plated
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: OSOPA1002BUF
O
S
S
O
P
P
T
A
A
1
1
0
0
0
2
3
B
A
U
T
F
1
O
O
0
GLOBAL MODEL
(4 or 5 digits)
TOLERANCE AND
RATIO TOLERANCE
SCHEMATIC
RESISTANCE
PACKAGING
OSOP
A = 20 pin
First 3 digits are significant
figures and the last digit
specifies the number of
zeroes to follow.
Abs. Tol.
Ratio
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (2)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 2500
TS = 100 min., 1 mult
(Tin Lead)
10 isolated resistors
B = 16 pin
A = 0.1 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1 %
0.05 %
0.1 %
0.1 %
0.1 %
0.5 %
0.025 %
OSOPT
(Lead (Pb)-free)
(e3)
8 isolated resistors
C = 24 pin
12 isolated resistors
Example:
1002 = 10K
1003 = 100K
D = 20 pin 19 resistors
pin 20 common
Z = 0.1 % (1)
UF = TUBED
E = 16 pin 15 resistors
pin 16 common
F = 24 pin 23 resistors
pin 24 common
Historical Part Number example: OSOPA5000B (for reference purposes only)
OSOP
A
5000
B
TOLERANCE AND
RATIO TOLERANCE
SERIES
SCHEMATIC
RESISTANCE
Notes
(1)
Tolerance available 1K and up
Preferred packaging code
(2)
Revision: 03-Mar-17
Document Number: 60002
2
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号：
©2020 ICPDF网 联系我们和版权申明