P0603E1002FB [VISHAY]
RESISTOR, THIN FILM, 0.125 W, 1 %, 25 ppm, 10000 ohm, SURFACE MOUNT, 0603, CHIP;
| 型号： | P0603E1002FB |
| 厂家： | 
VISHAY |
| 描述： | RESISTOR, THIN FILM, 0.125 W, 1 %, 25 ppm, 10000 ohm, SURFACE MOUNT, 0603, CHIP 电阻器 |
| 文件： | 总10页 (文件大小：157K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
P
Vishay Sfernice
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
FEATURES
• Load life stability at 70 °C for 2000 h:
0.1 % under Pn/0.05 % under Pd
• Low temperature coefficient down to 5 ppm/°C
(- 55 °C; + 155 °C)
• Very low noise < 35 dB and voltage coefficient
< 0.01 ppm/V
• Wide resistance range: 10 Ω to 50 MΩ
depending on size
For low noise and precision applications, superior stability,
low temperature coefficient of resistance, and low voltage
• Tolerances to 0.01 %
• In lot tracking ≤ 5 ppm/°C
• Termination: thin film technology
• Gold plated or pre-tinned terminations over nickel barrier
• Short circuits (jumpers) r < 50 mR, I < 2 A
• SMD wraparound terminations
coefficient, Vishay Sfernice’s proven precision
thin film
of
wraparound resistors exceed requirements
MIL-PRF-55342G characteristics Y 10 ppm/°C (- 55 °C;
+ 155 °C) down to 5 ppm/°C (- 55 °C; + 155 °C).
• Withstand moisture resistance test of AEC-Q200
• Compliant to RoHS directive 2002/95/EC
DIMENSIONS in millimeters (inches)
A
D
E
D
E
B
C
A
B
MAX. TOL.
+ 0.152 (+ 0.006)
MIN. TOL.
MAX. TOL.
D/E
CASE
SIZE
+ 0.127 (+ 0.005)
MIN. TOL.
C
- 0.152 (- 0.006)
- 0.127 (- 0.005)
NOMINAL
0.75 (0.029)
1.00 (0.039)
1.27 (0.005)
1.52 (0.060)
1.91 (0.075)
2.54 (0.100)
3.06 (0.120)
3.81 (0.150)
5.08 (0.200)
NOMINAL
0.60 (0.024)
0.60 (0.024)
1.27 (0.050)
0.85 (0.033)
1.27 (0.050)
1.27 (0.050)
1.60 (0.063)
1.32 (0.052)
2.54 (0.100)
NOMINAL
0.15 (0.006)
0.25 (0.010)
TOLERANCE
0.08 (0.003)
0.1 (0.004)
0302
0402
0505
0603
0.38 (0.015)
0.5 (0.02)
0.127 (0.005)
0705/0805
1005
0.13 (0.005)
1206
0.40 (0.016)
0.48 (0.019)
1505
2010
Note
• Case size 2512 under development. Please consult Vishay Sfernice.
* Pb containing terminations are not RoHS compliant, exemptions may apply
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
www.vishay.com
60
For technical questions, contact: sfer@vishay.com
Document Number: 53017
Revision: 15-Mar-10
P
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
Vishay Sfernice
SUGGESTED LAND PATTERN (to IPC-7351A)
Gmin.
Xmax.
Zmax.
DIMENSIONS (in millimeter)
CHIP SIZE
Zmax.
1.30
1.55
1.82
2.37
2.76
3.39
3.91
4.66
5.93
Gmin.
0.14
0.15
0.10
0.35
0.74
1.37
1.85
2.44
3.71
Xmax.
0.73
0.73
1.40
0.98
1.40
1.40
1.73
1.45
2.67
0302
0402
0505
0603
0705/0805
1005
1206
1505
2010
Note
• Case size 2512 under development. Please consult Vishay Sfernice.
ELECTRICAL SPECIFICATIONS
POWER RATING
LIMITING ELEMENT VOLTAGE
mW
CASE SIZE
RESISTANCE RANGE (2)
V
Pn (1)
Pd (1)
0302
40
63
30
40
25
50
10 Ω to 500 kΩ
10 Ω to 1.5 MΩ
10 Ω to 4 MΩ
10 Ω to 2.5 MΩ
10 Ω to 10 MΩ
10 Ω to 5 MΩ
10 Ω to 35 MΩ
10 Ω to 10 MΩ
10 Ω to 50 MΩ
0402
0505
125
125
200
250
330
350
1000
50
50
0603
100
125
125
250
175
500
75
0705/0805
1005
150
75
1206
200
75
1505
2010
300
Notes
Case size 2512 under development. Please consult Vishay Sfernice.
(1) Pn = Nominal power - Pd = Derated power intended to improve stability.
(2) For ohmic range versus tolerance and TCR see detailed table page 62.
•
Document Number: 53017
Revision: 15-Mar-10
For technical questions, contact: sfer@vishay.com
www.vishay.com
61
P
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
Vishay Sfernice
ELECTRICAL SPECIFICATIONS
TOLERANCE AND TCR VERSUS OHMIC VALUE
Resistance Range:
10 Ω to 50 MΩ
0.1 % to 1 %
0.01 % to 0.05 % on Y type
TIGHTEST
TOLERANCE
%
VALUE
RANGE
BEST TCR
(ppm/°C)
SIZE
Resistance Tolerance:
10R to 500K
10R to 75K
39R to 75K
39R to 50K
100R to 50K
250R to 50K
10R to 1M5
10R to 150K
39R to 150K
39R to 100K
100R to 100K
250R to 100K
10R to 4M
10R to 300K
39R to 300K
39R to 260K
100R to 260K
250R to 260K
10R to 2M5
10R to 500K
39R to 500K
39R to 332K
100R to 332K
250R to 332K
10R to 10M
10R to 750K
39R to 750K
39R to 511K
100R to 511K
250R to 511K
10R to 5M
10R to 750K
39R to 750K
39R to 500K
100R to 500K
250R to 500K
10R to 35M
10R to 3M5
39R to 3M5
39R to 1M8
100R to 1M8
250R to 1M8
10R to 10M
10R to 1M
0.1
0.1
50
25
25
Power Dissipation:
Pn: 40 mW to 1 W
Pd: 40 mW to 500 mW
on tolerance tighter than 0.05 %
0.05
0.05
0.02
0.01
0.1
P0302
10 (5) (3)
10 (5) (3)
10 (5) (3)
50
Temperature Coefficient: 5 ppm (0 °C; 70 °C);
10 ppm (- 55 °C; + 155 °C)
0.1
25
25
10 (5) (3)
10 (5) (3)
10 (5) (3)
50
25
25
10 (5) (3)
10 (5) (3)
10 (5) (3)
50
25
25
10 (5) (3)
10 (5) (3)
10 (5) (3)
50
25
25
10 (5) (3)
10 (5) (3)
10 (5) (3)
50
25
25
10 (5) (3)
10 (5) (3)
10 (5) (3)
50
25
25
10 (5) (3)
10 (5) (3)
10 (5) (3)
50
CLIMATIC SPECIFICATIONS
Operating Temp. Range: - 55 °C to + 155 °C
For temperature up to 215 °C, please consult factory
0.05
0.05
0.02
0.01
0.1
P0402
MECHANICAL SPECIFICATIONS
0.1
Substrate:
Technology:
Film:
Alumina
Thin film
0.05
0.05
0.02
0.01
0.1
P0505
Nickel chromium with mineral
passivation or CrSi
Protection:
Silicone
0.1
Terminations:
B type: SnPb over nickel barrier
for solder reflow
N type: SnAg over nickel barrier
G type: gold over nickel barrier
for other applications
0.05
0.05
0.02
0.01
0.1
P0603
0.1
0.05
0.05
0.02
0.01
0.1
P0705/0805
P1005
TEMPERATURE COEFFICIENT
TCR
5 ppm/°C (1)(2)
10 ppm/°C (2)
25 ppm/°C
50 ppm/°C
100 ppm/°C
CODE
FILM
NiCr
Z
Y
E
H
K
NiCr
0.1
NiCr
0.05
0.05
0.02
0.01
0.1
NiCr or CrSi
NiCr or CrSi
Notes
(1) Reduced temperature operating range:
0.1
[0 °C; + 70 °C] option available for (- 25 °C; + 85 °C): 0027
and [- 55 °C; + 155 °C]: 0079
R > 39 Ω on request for lower values.
0.05
0.05
0.02
0.01
0.1
P1206
(2)
POWER DERATING CURVE
0.1
25
39R to 1M
0.05
0.05
0.02
0.01
0.1
25
P1505
39R to 750K
100R to 750K
250R to 750K
10R to 50M
10R to 6M
10 (5) (3)
10 (5) (3)
10 (5) (3)
50
100
80
60
40
20
0
0.1
25
39R to 6M
39R to 3M
100R to 3M
250R to 3M
0.05
0.05
0.02
0.01
25
P2010
10 (5) (3)
10 (5) (3)
10 (5) (3)
Note
•
Size 2512 under development. Please consult Vishay Sfernice.
(3) 5 ppm/°C in a reduced operating range (0 °C; + 70 °C). Options
available for operating range (- 25 °C; + 85 °C) and (- 55 °C;
+ 155 °C) upon request with price adder.
0
20
40
60 70 80
100
120
140 155
Ambient Temperature in °C
www.vishay.com
62
For technical questions, contact: sfer@vishay.com
Document Number: 53017
Revision: 15-Mar-10
P
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
Vishay Sfernice
POPULAR OPTIONS
For any option it is recommended to consult Vishay Sfernice for availability first.
Option: Enlarged terminations:
For stringent and special power dissipation requirements, the thermal resistance between the resistive layer and the solder joint
can be reduced using enlarged terminations chip resistors which are soldered on large and thick copper pads acting as heatsink
(see application note: 53048 Power Dissipation in High Precision Vishay Sfernice Chip Resistors and Arrays (P Thin Film, PRA
Arrays, CHP Thick Film) www.vishay.com/doc?53048.
Option to order: 0063 (applies to size 1206/1505/2010).
DIMENSIONS (Option 0063) in millimeters
Bottom view for mounting
Uncoatted
ceramic
A
Enlarged
termination
B
F
D
E
A
B
E
D
MAX. TOL.
+ 0.152
MIN. TOL.
- 0.152
MAX. TOL.
+ 0.127
MIN. TOL.
- 0.127
MAX. TOL.
+ 0.13
MIN. TOL.
- 0.13
MAX. TOL.
+ 0.13
MIN. TOL.
- 0.13
F
CASE
SIZE
NOMINAL
3.06
NOMINAL
1.60
NOMINAL
NOMINAL
1.215
NOMINAL
MIN.
MAX.
1206
1505
2010
0.40
3.81
1.32
1.59
0.63
0.50
0.76
0.48
5.08
2.54
2.25
Note
• Case size 2512 under development. Please consult Vishay Sfernice.
SUGGESTED LAND PATTERN (Option 0063)
Gmin.
Xmax.
Zmax.
DIMENSIONS (in millimeter)
Gmin.
CHIP SIZE
Zmax.
Xmax.
1.73
1.45
2.67
1206
1505
2010
3.91
4.66
5.93
0.50
Note
• Case size 2512 under development. Please consult Vishay Sfernice.
Document Number: 53017
Revision: 15-Mar-10
For technical questions, contact: sfer@vishay.com
www.vishay.com
63
P
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
Vishay Sfernice
Option: Tightest Temperature Coefficient on Extended Temperature Range
Option to order 0027:
TCR: 5 ppm/°C in [- 25 °C; + 85 °C] temperature range. Price adder will apply. Please consult Vishay Sfernice.
Option to order 0079:
TCR: 5 ppm/°C in [- 55 °C; + 155 °C] temperature range. Price adder will apply. Please consult Vishay Sfernice.
Option: High Temperature
For applications such as down hole drilling, high temperature withstanding is required. Vishay Sfernice offers an option
for utilization on extended temperature range: [- 55 °C; + 215 °C] powered (and up to 230 °C unpowered).
For guidance in designs, please refer to application note: 53047 Power Dissipation Considerations in High Precision Vishay
Sfernice Thin Film Chip Resistors and Arrays (P, PRA etc.) (High Temperature Application) www.vishay.com/doc?53047.
Option to order 0031:
Caution:
Performances obtained with following mounting conditions:
PCB: Polymide
Recommended terminations: Gold (< 1 µ)
Performances:
Solder paste: PbSnAg (93.5/5/1.5)
Best temperature coefficient:
5 ppm/°C in [0 °C; + 70 °C]
10 ppm/°C [- 55 °C; + 155 °C]
15 ppm/°C [- 55 °C; + 185 °C]
25 ppm/°C [- 55 °C; + 215 °C]
Power rating: 0.1 x Pn
Best tolerance after high temperature assembly: 0.1 %
Long term stability: 0.5 % after 1000 h at 215 °C (ambient temperature) at 0.1 Pn
Stability after 4000 h unpowered
4500
4000
3500
230 °C
215 °C
3000
2500
2000
200 °C
1500
1000
185 °C
500
0
0
200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000
- 500
h
www.vishay.com
64
For technical questions, contact: sfer@vishay.com
Document Number: 53017
Revision: 15-Mar-10
P
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
Vishay Sfernice
Option: Marking
Option to order 0013:
Marking of ohmic value and tolerance:
Sizes: 0805 to 1005: 3 digits marking (according to EIA-96)
Sizes: 1206 to 2010: 4 digits marking (same codification than in the ordering procedure)
Tolerance indicated by a color dot.
Option to order 0014:
Marking of ohmic value:
Sizes: 0805 to 1005: 3 digits marking (according to EIA-96)
Sizes: 1206 to 2010: 4 digits marking (same codification than in the ordering procedure)
No standard marking available for smaller sizes.
A price adder will apply to the unit price of the parts for options 0013 and 0014.
Option: AEC-Q200 moisture resistance
Option to Order 0058: Specific production process to withstand 85 °C/85 % at Pn/10
PACKAGING
PACKAGING RULES
ESD packaging available: waffle-pack, and plastic tape and
reel (low conductivity). Paper tape available upon request
(ESD only).
Waffle Pack
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered exceeds maximum quantity of a
single waffle pack, the waffle packs are stacked up on the top
of each other and closed by one single cover.
NUMBER OF PIECES PER PACKAGE
TAPE
SIZE MOQ
TAPE AND REEL
WAFFLE PACK
WIDTH
2" × 2"
MIN.
100
100
MAX.
4000
2000
To get “not stacked up” waffle pack in case of ordered
quantity > maximum number of pieces per package:
Please consult Vishay Sfernice for specific ordering
code
0302
0402
0505
0603
100
Tape and Reel
8 mm
0805
100
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered is between the MOQ and the
maximum reel capacity, only one reel is provided.
When several reels are needed for ordered quantity
within MOQ and maximum reel capacity: Please consult
Vishay Sfernice for specific ordering code
0705
1005
1206
1505
2010
221
140
60
8 mm (1)
Note
(1) 12 mm on request
PERFORMANCE
MIL OR CECC
REQUIREMENTS
TYPICAL
PERFORMANCES
TESTS
CONDITIONS
MIL-PRF-55342G
Thermal Shock
0.05 %
0.05 %
0.05 %
0.05 %
0.02 %
0.01 %
0.01 %
0.03 %
MIL-STD-202 F-Method 107 F
MIL-PRF-55342G
PARA 3.10.4.7.5
MIL-PRF-55342G
PARA 3.9 and 4.7.4
Short Time Overload
Low Temperature Operation
Resistance to Solder Heat
MIL-PRF-55342G
PARA 3.12, 4.7.7, 4.7.1.2
MIL-PRF-55342G
PARA 3.13 and 4.7.8
0.10 %
0.10 %
0.01 %
0.01 %
MIL-STD-202 F-Method 106 E
Moisture Resistance
High Temperature
CECC 56 days/40 °C/93 % RH
AEC-Q200
85 °C/85 % RH/Pn/10
1000 h
MIL-PRF-55342G
PARA 3.11 and 4.7.6
0.5 % + 0.05 Ω
Max. < 0.3 % + 0.05 Ω
0.05 %
0.5 %
0.05 %
MIL-PRF-55342G
2000 h Pn at 70 °C
MIL-STD-202 F-Method 108 A
Load Life
0.10 % (2)
Notes
(2) 0.05 % under Pd
(3) Option to order
Document Number: 53017
Revision: 15-Mar-10
For technical questions, contact: sfer@vishay.com
www.vishay.com
65
P
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
Vishay Sfernice
Maximum permissible pulse load Pi max. for single pulse
100
P2512
P2010
P1206
P0805
P0603
P0402
P
10
1
0.1
0.00001
0.0001
0.001
0.01
0.1
1
10
Pulse Duration t (s)
Energy for single pulse
100
10
1
0.1
0.01
P2512
P2010
P1206
P0805
P0603
P0402
0.001
0.0001
0.00001
0.00001
0.0001
0.001
0.01
0.1
1
10
Pulse Duration t (s)
Maximum permissible pulse voltage Ui max.
10 000
1000
100
P2512
P2010
P1206
P0805
P0603
P0402
10
0.00001
0.0001
0.001
0.01
0.1
1
10
Pulse Duration t (s)
www.vishay.com
66
For technical questions, contact: sfer@vishay.com
Document Number: 53017
Revision: 15-Mar-10
P
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
Vishay Sfernice
Maximum permissible pulse load Pi max.
100
10
1
P2512
P2010
P1206
P0805
P0603
P0402
P
0.1
0.00001
0.0001
0.001
0.01
0.1
1
10
Pulse Duration t (s)
1.2/50 µs lightning surge
10 000
1000
100
P2512
P1206
P0805
P0603
10
10
100
1000
10 000
100 000
Resistor Value (Ω)
10/70 µs lightning surge
10 000
1000
100
P1206
P0805
P0603
10
10
100
1000
10 000
100 000
Resistor Value (Ω)
Document Number: 53017
Revision: 15-Mar-10
For technical questions, contact: sfer@vishay.com
www.vishay.com
67
P
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
Vishay Sfernice
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: P0505Y1003BBT0933
P
0
5
0
5
Y
1
0
0
3
B
B
T
0
9
3
3
GLOBAL
MODEL
SIZE
TCR
VALUE
TOLERANCE TERMINATION PACKAGING OPTION
P
0302
0402
0505
0603
0705
0805
1005
1206
1505
2010
K =
The first three digits
are significant figures
L = 0.01 %
P = 0.02 %
W = 0.05 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1 %
B: SnPb over
nickel barrier
N: SnAg over
nickel barrier
G: Gold over
nickel barrier
Blank =
Leave
Waffle pack blank if no
100 ppm/°C
T = Tape (1)
PT = Paper
tape (2)
H = 50 ppm/°C and the last digit
E = 25 ppm/°C specifies the number
Y = 10 ppm/°C of zeros to follow, R
X = Jumper
Z = 5 ppm
(0.70 °C)
option
designates
point
decimal
G = 2 %
B: Lead bearing version
N and G: Lead (Pb)-free/
RoHS version
10R0 = 10 Ω
3901 = 3900 Ω
1004 = 1 MΩ
J = 5 %
X = Jumper
0R00 = Jumper
Historical Part Number example: P 0505
Y
1003
1003
B
B
TR R0933 e2
B
P
0505
Y
B
TR
R0933
e2
HISTORICAL
MODEL
SIZE
TCR
VALUE
TOLERANCE TERMINATION PACKAGING OPTION
RoHS
e2:
P
0302
0402
0505
0603
0705
0805
1005
1206
1505
2010
K
=
=
=
=
X
Z
100 ppm/°C The first three digits L = 0.01 %
50 ppm/°C are significant figures P = 0.02 %
25 ppm/°C and the last digit W = 0.05 %
10 ppm/°C specifies the number
= Jumper
5 ppm
(0.70 °C)
B: SnPb over
nickel barrier
N: SnAg over
nickel barrier
G: Gold over
nickel barrier
Blank =
Leaveblank
if no option Tin/silver
H
Waffle pack
e4:
TR = Tape (1)
E
Y
Gold
blank:
SnPb
B = 0.1 %
of zeros to follow, R C = 0.25 %
=
designates
point
decimal
D = 0.5 %
F = 1 %
G = 2 %
J = 5 %
X = Jumper
B: Lead bearing version
N and G: Lead (Pb)-free/
RoHS version
10R0 = 10 Ω
3901 = 3900 Ω
1004 = 1 MΩ
0R00 = Jumper
Notes
•
Chips ready to be trimmed available. (Ptrim) - Please consult Vishay Sfernice.
(1) For specific quantity of parts per packaging please consult Vishay Sfernice.
(2) For paper tape please consult Vishay Sfernice.
QUICK PROTOTYPING
Vishay Sfernice can offer quick prototyping service in 3 weeks production time for most popular case sizes: 0603, 0805, 1206
(Best tolerance: 0.05 %, best TCR: 10 ppm/°C) - Premium will apply - Check availability
www.vishay.com
68
For technical questions, contact: sfer@vishay.com
Document Number: 53017
Revision: 15-Mar-10
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
P0603E1074BG
RESISTOR, THIN FILM, 0.125 W, 0.1 %, 25 ppm, 1070000 ohm, SURFACE MOUNT, 0603, CHIP, ROHS COMPLIANT
VISHAY
P0603E1152BST
RESISTOR, THIN FILM, 0.2 W, 0.1 %, 25 ppm, 11500 ohm, SURFACE MOUNT, 0603, CHIP
VISHAY
P0603E125GB
RESISTOR, THIN FILM, 0.125 W, 2 %, 25 ppm, 1200000 ohm, SURFACE MOUNT, 0603, CHIP
VISHAY
P0603E125GG
RESISTOR, THIN FILM, 0.125 W, 2 %, 25 ppm, 1200000 ohm, SURFACE MOUNT, 0603, CHIP, GREEN
VISHAY
P0603E125GGT
RESISTOR, THIN FILM, 0.125 W, 2 %, 25 ppm, 1200000 ohm, SURFACE MOUNT, 0603, CHIP, GREEN
VISHAY
P0603E125JB
RESISTOR, THIN FILM, 0.125 W, 5 %, 25 ppm, 1200000 ohm, SURFACE MOUNT, 0603, CHIP
VISHAY
P0603E125JG
RESISTOR, THIN FILM, 0.125 W, 5 %, 25 ppm, 1200000 ohm, SURFACE MOUNT, 0603, CHIP, GREEN
VISHAY
P0603E1383BST
RESISTOR, THIN FILM, 0.2 W, 0.1 %, 25 ppm, 138000 ohm, SURFACE MOUNT, 0603, CHIP
VISHAY
P0603E1501BN
RESISTOR, THIN FILM, 0.125 W, 0.1 %, 25 ppm, 1500 ohm, SURFACE MOUNT, 0603, CHIP
VISHAY
©2020 ICPDF网 联系我们和版权申明