P1005C1131BBTR [VISHAY]
Fixed Resistor, Thin Film, 0.25W, 1130ohm, 75V, 0.1% +/-Tol, -5,5ppm/Cel, 1005,;
| 型号： | P1005C1131BBTR |
| 厂家： | 
VISHAY |
| 描述： | Fixed Resistor, Thin Film, 0.25W, 1130ohm, 75V, 0.1% +/-Tol, -5,5ppm/Cel, 1005, |
| 文件： | 总9页 (文件大小：121K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
P
www.vishay.com
Vishay Sfernice
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
FEATURES
• Load life stability at 70 °C for 2000 h:
0.1 % under Pn/0.05 % under Pd
• Low temperature coefficient down to 5 ppm/°C
(- 55 °C; + 155 °C)
• Very low noise < - 35 dB and voltage coefficient
< 0.01 ppm/V
• Wide resistance range: 10 to 76 M
depending on size
• Tolerances to ꢀ0ꢀ1 %
For low noise and precision applications, superior stability,
• In lot tracking 5 ppm/°C
low temperature coefficient of resistance, and low voltage
• Termination: Thin film technology
coefficient, Vishay Sfernice’s proven precision thin film
• Gold plated or pre-tinned terminations over nickel barrier
wraparound
resistors
exceed
requirements
of
• Short circuits (jumpers) r < 50 mR, I < 2 A, see PZR
datasheet (www.vishay.com/doc?53053)
MIL-PRF-55342G characteristics Y 10 ppm/°C (- 55 °C;
+ 155 °C) down to 5 ppm/°C (- 55 °C; + 155 °C).
• SMD wraparound terminations
• Withstand moisture resistance test of AEC-Q200
• Compliant to RoHS Directive 2002/95/EC
Notes
* Pb containing terminations are not RoHS compliant, exemptions
may apply
** Please see document “Vishay Material Category Policy”:
www.vishay.com/doc?99902
DIMENSIONS in millimeters (inches)
A
D
D
E
B
C
E
A
B
MAX0 TOL0
+ ꢀ0152 (+ ꢀ0ꢀꢀ6)
MIN0 TOL0
MAX0 TOL0
D/E
+ ꢀ0127 (+ ꢀ0ꢀꢀ5)
MIN0 TOL0
CASE SIZE
C
- ꢀ0152 (- ꢀ0ꢀꢀ6)
- ꢀ0127 (- ꢀ0ꢀꢀ5)
NOMINAL
0.75 (0.029)
1.00 (0.039)
1.27 (0.005)
1.52 (0.060)
1.91 (0.075)
2.54 (0.100)
3.06 (0.120)
3.81 (0.150)
5.08 (0.200)
NOMINAL
0.60 (0.024)
0.60 (0.024)
1.27 (0.050)
0.85 (0.033)
1.27 (0.050)
1.27 (0.050)
1.60 (0.063)
1.32 (0.052)
2.54 (0.100)
NOMINAL
0.15 (0.006)
0.25 (0.010)
TOLERANCE
0.08 (0.003)
0.1 (0.004)
0302
0402
0505
0603
0.38 (0.015)
0.5 (0.02)
0.127 (0.005)
0705/0805
1005
0.13 (0.005)
1206
0.40 (0.016)
0.48 (0.019)
1505
2010
Note
Case size 2512 under development. Please consult Vishay Sfernice.
•
Revision: 08-Sep-11
Document Number: 53017
1
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P
www.vishay.com
Vishay Sfernice
SUGGESTED LAND PATTERN (to IPC-7351A)
Gmin.
Xmax.
Zmax.
DIMENSIONS (in millimeter)
CHIP SIZE
Zmax0
Gmin0
0.14
0.15
0.10
0.35
0.74
1.37
1.85
2.44
3.71
Xmax0
0.73
0.73
1.40
0.98
1.40
1.40
1.73
1.45
2.67
0302
1.30
1.55
1.82
2.37
2.76
3.39
3.91
4.66
5.93
0402
0505
0603
0705/0805
1005
1206
1505
2010
Note
Case size 2512 under development. Please consult Vishay Sfernice.
•
ELECTRICAL SPECIFICATIONS
POWER RATING
LIMITING ELEMENT VOLTAGE
mW
CASE SIZE
RESISTANCE RANGE (2)
V
Pn (1)
40
Pd (1)
30
0302
25
50
10 to 750 k
10 to 1.5 M
10 to 4 M
0402
63
40
0505
125
125
200
250
330
350
1000
50
50
0603
100
125
125
250
175
500
75
10 to 3.2 M
10 to 10 M
10 to 8.1 M
10 to 35 M
10 to 15 M
10 to 76 M
0705/0805
1005
150
75
1206
200
75
1505
2010
300
Notes
•
Case size 2512 under development. Please consult Vishay Sfernice.
Pn = Nominal power - Pd = Derated power intended to improve stability.
For ohmic range versus tolerance and TCR see detailed table on next page0
(1)
(2)
Revision: 08-Sep-11
Document Number: 53017
2
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P
www.vishay.com
Vishay Sfernice
ELECTRICAL SPECIFICATIONS
TEMPERATURE COEFFICIENT
Resistance range:
Resistance tolerance:
Power dissipation:
10 to 76 M
TCR
5 ppm/°C (1)
CODE
FILM
NiCr
0.01 % to 1 %
C (- 55 °C; + 155 °C)
Pn: 40 mW to 1 W
5 ppm/°C (1)
10 ppm/°C (1)
25 ppm/°C
50 ppm/°C
100 ppm/°C
Z (0 °C; + 70 °C)
NiCr
Pd: 40 mW to 500 mW
Y
E
NiCr
Temperature coefficient: Down to 5 ppm - 55 °C; + 155 °C
NiCr
H
K
NiCr or CrSi
NiCr or CrSi
CLIMATIC SPECIFICATIONS
Operating temp0 range: - 55 °C to + 155 °C
Note
(1)
For temperature up to 230 °C, see PHT datasheet
(www.vishay.com/doc?53050)
R > 39 on request for lower values.
POWER DERATING CURVE
MECHANICAL SPECIFICATIONS
Substrate:
Technology:
Film:
Alumina
Thin film
100
80
60
40
20
0
Nickel chromium with mineral
passivation or CrSi
Protection:
Silicone
Terminations:
B type: SnPb over nickel barrier
for solder reflow
N type: SnAg over nickel barrier
G type: gold over nickel barrier
for other applications
0
20
40
60 70 80
100
120
140 155
Ambient Temperature in °C
BEST TOLERANCE AND TCR VS. OHMIC VALUE
3M8
72ꢀK
1M3
4ꢀꢀK
36ꢀK
187K
67K
5M
7M5
1M5
3M5
81ꢀK
75ꢀK
5ꢀꢀK
4ꢀꢀK
15ꢀK
75K
76M
15M
35M
8M1
1ꢀM
3M2
P2ꢀ1ꢀ
P15ꢀ5
P12ꢀ6
P1ꢀꢀ5
Pꢀ8ꢀ5
Pꢀ6ꢀ3
Pꢀ5ꢀ5
Pꢀ4ꢀ2
Pꢀ3ꢀ2
2M
55ꢀK
511K
332K
26ꢀK
1ꢀꢀK
5ꢀK
1ꢀ Ω
1ꢀꢀ Ω
25ꢀ Ω
1M5
75ꢀK
35K
ꢀ0ꢀ5 %
ꢀ0ꢀ2 %
ꢀ0ꢀ1 %
ꢀ0ꢀ5 %
ꢀ01 %
TCR C
TCR Z, Y
TCR E
TCR H, K
Revision: 08-Sep-11
Document Number: 53017
3
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P
www.vishay.com
POPULAR OPTIONS
Vishay Sfernice
For any option it is recommended to consult Vishay Sfernice for availability first.
Option: Enlarged terminations:
For stringent and special power dissipation requirements, the thermal resistance between the resistive layer and the solder joint
can be reduced using enlarged terminations chip resistors which are soldered on large and thick copper pads acting as heatsink
(see application note: 53048 Power Dissipation in High Precision Vishay Sfernice Chip Resistors and Arrays (P Thin Film, PRA
Arrays, CHP Thick Film) www.vishay.com/doc?53048.
Option to order: 0063 (applies to size 1206/1505/2010).
DIMENSIONS (Option 0063) in millimeters
Bottom view for mounting
Uncoatted
ceramic
A
Enlarged
termination
B
F
D
E
A
B
E
D
MAX0 TOL0
+ ꢀ0152
MIN0 TOL0
- ꢀ0152
MAX0 TOL0
+ ꢀ0127
MIN0 TOL0
- ꢀ0127
MAX0 TOL0
+ ꢀ013
MIN0 TOL0
- ꢀ013
MAX0 TOL0
+ ꢀ013
MIN0 TOL0
- ꢀ013
F
CASE SIZE
NOMINAL
3.06
NOMINAL
1.60
NOMINAL
NOMINAL
1.215
NOMINAL
MIN0
MAX0
1206
1505
2010
0.40
3.81
1.32
1.59
0.63
0.50
0.76
0.48
5.08
2.54
2.25
Note
Case size 2512 under development. Please consult Vishay Sfernice.
•
SUGGESTED LAND PATTERN (Option 0063)
Gmin.
Xmax.
Zmax.
DIMENSIONS (IN MILLIMETER)
Gmin0
CHIP SIZE
Zmax0
Xmax0
1.73
1.45
2.67
1206
1505
2010
3.91
4.66
5.93
0.50
Note
Case size 2512 under development. Please consult Vishay Sfernice.
•
Revision: 08-Sep-11
Document Number: 53017
4
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P
www.vishay.com
Option: Marking
Vishay Sfernice
Option to order 0013:
Marking of ohmic value and tolerance:
Sizes: 0805 to 1005: 3 digits marking (according to EIA-96)
Sizes: 1206 to 2010: 4 digits marking (same codification than in the ordering procedure)
Tolerance indicated by a color dot.
Option to order 0014:
Marking of ohmic value:
Sizes: 0805 to 1005: 3 digits marking (according to EIA-96)
Sizes: 1206 to 2010: 4 digits marking (same codification than in the ordering procedure)
No standard marking available for smaller sizes.
A price adder will apply to the unit price of the parts for options 0013 and 0014.
Option: AEC-Q2ꢀꢀ
Moisture resistance
Option to Order 0058:
Specific production process to withstand 85 °C/85 % at Pn/10
PACKAGING
PACKAGING RULES
ESD packaging available: waffle-pack, and plastic tape and
reel (low conductivity). Paper tape available upon request
(ESD only) (for size 0603, 0805, and 1206).
Waffle Pack
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered exceeds maximum quantity of a
single waffle pack, the waffle packs are stacked up on the
top of each other and closed by one single cover.
To get “not stacked up” waffle pack in case of ordered
quantity > maximum number of pieces per package:
Please consult Vishay Sfernice for specific ordering
code0
NUMBER OF PIECES PER PACKAGE
TAPE
SIZE MOQ
TAPE AND REEL
WAFFLE PACK
2" × 2"
WIDTH
MIN0
MAX0
0302
0402
0505
0603
5000
100
Tape and Reel
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered is between the MOQ and the
maximum reel capacity, only one reel is provided.
When several reels are needed for ordered quantity
within MOQ and maximum reel capacity: Please consult
Vishay Sfernice for specific ordering code0
100
8 mm
8 mm
0805
0705
100
1005
1206
1505
2010
221
140
4000
2000
60
100
PERFORMANCE
MIL OR CECC
REQUIREMENTS
TYPICAL
PERFORMANCES
TESTS
CONDITIONS
MIL-PRF-55342G
MIL-STD-202 F-Method 107 F
Thermal shock
0.05 %
0.05 %
0.05 %
0.05 %
0.02 %
0.01 %
0.01 %
0.03 %
MIL-PRF-55342G
PARA 3.10.4.7.5
Short time overload
MIL-PRF-55342G
PARA 3.9 and 4.7.4
Low temperature operation
Resistance to solder heat
MIL-PRF-55342G
PARA 3.12, 4.7.7, 4.7.1.2
MIL-PRF-55342G
PARA 3.13 and 4.7.8
MIL-STD-202 F-Method 106 E
0.10 %
0.10 %
0.01 %
0.01 %
Moisture resistance
CECC 56 days/40 °C/93 % RH
AEC-Q200 (2)
85 °C/85 % RH/Pn/10
1000 h
0.5 % + 0.05
Max. < 0.3 % + 0.05
MIL-PRF-55342G
PARA 3.11 and 4.7.6
High temperature
Load life
0.05 %
0.5 %
0.05 %
MIL-PRF-55342G
2000 h Pn at 70 °C
0.10 % (1)
MIL-STD-202 F-Method 108 A
Notes
(1)
(2)
0.05 % under Pd
Option to order
Revision: 08-Sep-11
Document Number: 53017
5
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P
www.vishay.com
Vishay Sfernice
Maximum permissible pulse load Pi max0 for single pulse
100
P2512
P2010
P1206
P0805
P0603
P0402
P
10
1
0.1
0.00001
0.0001
0.001
0.01
0.1
1
10
Pulse Duration t (s)
Energy for single pulse
100
10
1
0.1
0.01
P2512
P2010
P1206
P0805
P0603
P0402
0.001
0.0001
0.00001
0.00001
0.0001
0.001
0.01
0.1
1
10
Pulse Duration t (s)
Maximum permissible pulse voltage Ui max0
10 000
1000
100
P2512
P2010
P1206
P0805
P0603
P0402
10
0.00001
0.0001
0.001
0.01
0.1
1
10
Pulse Duration t (s)
Revision: 08-Sep-11
Document Number: 53017
6
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P
www.vishay.com
Vishay Sfernice
Maximum permissible pulse load Pi max0
100
P2512
P2010
P1206
P0805
P0603
P0402
P
10
1
0.1
0.00001
0.0001
0.001
0.01
0.1
1
10
Pulse Duration t (s)
102/5ꢀ μs lightning surge
10 000
1000
100
10
P2512
P1206
P0805
P0603
10
100
1000
10 000
100 000
Resistor Value (Ω)
1ꢀ/7ꢀꢀ μs lightning surge
10 000
1000
100
P1206
P0805
P0603
10
10
100
1000
10 000
100 000
Resistor Value (Ω)
Revision: 08-Sep-11
Document Number: 53017
7
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P
www.vishay.com
Vishay Sfernice
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: Pꢀ5ꢀ5Y1ꢀꢀ3BBTꢀ999
P
0
5
0
5
Y
1
0
0
3
B
B
T
0
9
9
9
GLOBAL MODEL SIZE
TCR
VALUE
TOLERANCE
TERMINATION PACKAGING
OPTION
P
ꢀ3ꢀ2
ꢀ4ꢀ2
K =
The first three digits
are significant figures
and the last digit
specifies the number
of zeros to follow,
R designates
L = 0.01 %
P = 0.02 %
W = 0.05 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1 %
B: SnPb over
nickel barrier
N: SnAg over
nickel barrier
G: Gold over
nickel barrier
Blank =
Waffle pack
T = Tape (1)
PT = Paper
tape (2)
Leave
blank if no
option
100 ppm/°C
ꢀ5ꢀ5 H = 50 ppm/°C
ꢀ6ꢀ3
ꢀ7ꢀ5
ꢀ8ꢀ5
1ꢀꢀ5
12ꢀ6
E = 25 ppm/°C
Y = 10 ppm/°C
Z = 5 ppm
(0.70 °C)
decimal point
B: Lead bearing version
N and G: Lead (Pb)-free/RoHS version
C = 5 ppm
G = 2 %
15ꢀ5 (- 55 °C; + 155 °C)
2ꢀ1ꢀ
10R0 = 10
3901 = 3900
1004 = 1 M
J = 5 %
Historical Part Number example: P ꢀ5ꢀ5
Y
1ꢀꢀ3
B B TR Rꢀ999 e2
P
ꢀ5ꢀ5
Y
1ꢀꢀ3
B
B
TR
Rꢀ999
e2
HISTORICAL
MODEL
SIZE
TCR
VALUE
TOLERANCE TERMINATION PACKAGING
OPTION
RoHS
P
ꢀ3ꢀ2
ꢀ4ꢀ2
K =
The first three
digits are
L = 0.01 %
P = 0.02 %
B: SnPb over
nickel barrier
N: SnAg over
nickel barrier
G: Gold over
nickel barrier
Blank =
Leave blank
if no option Tin/silver
e2:
100 ppm/°C
Waffle pack
ꢀ5ꢀ5 H = 50 ppm/°C significant figures W = 0.05 %
TR = Tape (1)
e4:
Gold
Blank:
SnPb
ꢀ6ꢀ3 E = 25 ppm/°C
ꢀ7ꢀ5 Y = 10 ppm/°C
ꢀ8ꢀ5
1ꢀꢀ5
12ꢀ6
15ꢀ5 (- 55 °C; + 155 °C)
2ꢀ1ꢀ
and the last digit
specifies the
number of zeros
to follow,
R designates
decimal point
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1 %
G = 2 %
J = 5 %
Z = 5 ppm
(0.70 °C)
C = 5 ppm
B: Lead bearing version
N and G: Lead (Pb)-free/RoHS version
10R0 = 10
3901 = 3900
1004 = 1 M
Notes
(1)
(2)
For specific quantity of parts per packaging please consult Vishay Sfernice.
For paper tape please consult Vishay Sfernice (0603, 0805, and 1206 only).
QUICK PROTOTYPING
Vishay Sfernice can offer quick prototyping service in 3 weeks production time for most popular case sizes: 0603, 0805, 1206
(Best tolerance: 0.05 %, best TCR: 10 ppm/°C) - Premium will apply - Check availability
PTRIM
Chips ready to be trimmed available. Please consult Vishay Sfernice.
Notes
•
•
•
•
For CECC qualified, see RV datasheet (www.vishay.com/doc?60022)
For ESCC qualified, see PHR datasheet (www.vishay.com/doc?53037) or PFRR datasheet (www.vishay.com/doc?53046)
For High Temperature (230 °C), see PHT datasheet (www.vishay.com/doc?53050)
For Strap (0 ), see PZR datasheet (www.vishay.com/doc?53053)
Revision: 08-Sep-11
Document Number: 53017
8
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
相关型号：
P1005C1321DGTRE4
Fixed Resistor, Thin Film, 0.25W, 1320ohm, 75V, 0.5% +/-Tol, -5,5ppm/Cel, 1005,
VISHAY
P1005C1453PG
Fixed Resistor, Thin Film, 0.25W, 145000ohm, 75V, 0.02% +/-Tol, -5,5ppm/Cel, 1005,
VISHAY
P1005C1870WNE2
Fixed Resistor, Thin Film, 0.25W, 187ohm, 75V, 0.05% +/-Tol, -5,5ppm/Cel, 1005,
VISHAY
P1005C3303JBTR
Fixed Resistor, Thin Film, 0.25W, 330000ohm, 75V, 5% +/-Tol, -5,5ppm/Cel, 1005,
VISHAY
P1005C3570CNTRE2
Fixed Resistor, Thin Film, 0.25W, 357ohm, 75V, 0.25% +/-Tol, -5,5ppm/Cel, 1005,
VISHAY
P1005C3650PGTRE4
Fixed Resistor, Thin Film, 0.25W, 365ohm, 75V, 0.02% +/-Tol, -5,5ppm/Cel, 1005,
VISHAY
P1005C3921PNTRE2
Fixed Resistor, Thin Film, 0.25W, 3920ohm, 75V, 0.02% +/-Tol, -5,5ppm/Cel, 1005,
VISHAY
P1005C4022CN
Fixed Resistor, Thin Film, 0.25W, 40200ohm, 75V, 0.25% +/-Tol, -5,5ppm/Cel, 1005,
VISHAY
P1005C7412PB
Fixed Resistor, Thin Film, 0.25W, 74100ohm, 75V, 0.02% +/-Tol, -5,5ppm/Cel, 1005,
VISHAY
P1005C96R5DGE4
Fixed Resistor, Thin Film, 0.25W, 96.5ohm, 75V, 0.5% +/-Tol, -5,5ppm/Cel, 1005,
VISHAY
©2020 ICPDF网 联系我们和版权申明