P2SMA150A-M3/61T [VISHAY]
DIODE 200 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMA, 2 PIN, Transient Suppressor;
| 型号： | P2SMA150A-M3/61T |
| 厂家： | 
VISHAY |
| 描述： | DIODE 200 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMA, 2 PIN, Transient Suppressor 局域网 光电二极管 电视 |
| 文件： | 总4页 (文件大小：84K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
P2SMA130A thru P2SMA220A
www.vishay.com
Vishay General Semiconductor
®
Surface Mount TRANSZORB Transient Voltage Suppressors
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in uni-directional 200 W peak pulse
power capability with a 10/1000 μs waveform
• Excellent clamping capability
DO-214AC (SMA)
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
PRIMARY CHARACTERISTICS
VBR
130 V to 220 V
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PPPM
200 W
PD
0.5 W
VWM
111 V to 185 V
150 °C
MECHANICAL DATA
Case: DO-214AC (SMA)
Molding compound meets UL 94 V-0 flammability rating
TJ max.
Polarity
Package
Uni-directional
DO-214AC (SMA)
Base P/N-M3
-
halogen-free, RoHS-compliant, and
commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 2 whisker test
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive and telecommunication.
Polarity: Color band denotes the cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
200
UNIT
W
(1)(2)
Peak pulse power dissipation with a 10/1000 μs waveform (fig. 1)
Peak pulse current with a 10/1000 μs waveform (fig. 3)
Power dissipation at TA = 25 °C (fig. 6)
PPPM
(1)
IPPM
See next table
0.5
A
PD
W
Operating junction and storage temperature range
TJ, TSTG
- 55 to + 150
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal
(2)
Revision: 10-Dec-13
Document Number: 89376
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P2SMA130A thru P2SMA220A
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
MAXIMUM
MAXIMUM
MAXIMUM
TEST
CURRENT
IT
STAND-OFF
VOLTAGE
VWM
MAXIMUM
TEMPERATURE
OF VBR
VOLTAGE
DEVICE
DEVICE TYPE MARKING
CODE
REVERSE PEAK PULSE CLAMPING
(1)
V
BR AT IT
(V)
LEAKAGE
AT VWM
SURGE
VOLTAGE
AT IPPM
VC (V)
CURRENT
(mA)
(V)
(%/°C)
ID (μA) (1)
I
PPM (A) (2)
MIN. MAX.
P2SMA130A
P2SMA140A
P2SMA150A
P2SMA170A
P2SMA180A
P2SMA200A
P2SMA220A
2VK
2VL
2VM
2VN
2VP
2VQ
2VR
124
133
143
162
171
190
209
137
147
158
179
189
210
231
1.0
1.0
1.0
1.0
1.0
1.0
1.0
111
119
128
145
154
171
185
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.11
1.04
0.97
0.85
0.81
0.73
0.61
179
192
207
234
246
274
328
0.140
0.140
0.140
0.150
0.150
0.150
0.150
Notes
(1)
Pulse test: tp 50 ms
Surge current waveform per fig. 3 and derate per fig. 2
(2)
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
UNIT
°C/W
°C/W
(1)
Thermal resistance, junction to ambient air
Thermal resistance, junction to mount
RJA
250
50
(1)
RJM
Note
(1)
Mounted on minimum recommended pad layout
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY
DELIVERY MODE
P2SMA130A-M3/61T
P2SMA130A-M3/5AT
0.064
0.064
61T
5AT
1800
7500
7" diameter plastic tape and reel
13" diameter plastic tape and reel
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
100
10
1
100
75
50
0.1
25
0.2" x 0.2" (5.0 mm x 5.0 mm) off
Voltage, VWM Copper Pad Areas
0.01
0
0.1
1
10
100
1000
10 000
0
25
50
75
100
125
150
175
td - Pulse Width (μs)
TJ - Initial Temperature (°C)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 2 - Pulse Derating Curve
Revision: 10-Dec-13
Document Number: 89376
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P2SMA130A thru P2SMA220A
www.vishay.com
Vishay General Semiconductor
150
100
50
1000
tr = 10 μs
tr = 8 μs
TJ = 25 °C
Pulse Width (td)
is Defined as the Point
Where the Peak Current
Decays to 50 % of IPPM
Peak Value
IPPM
100
10
1
Half Value - IPP
IPPM
2
td = 1000 μs
td = 20 μs
td
0
0.01
0.1
1
10
100
1000
1.0
3.0
4.0
0
2.0
t - Time (ms)
tp - Pulse Duration (s)
Fig. 3 - Pulse Waveform
Fig. 5 - Typical Transient Thermal Impedance
0.6
0.5
0.4
0.3
0.2
0.1
0
100
10
1
FR-4 Board, on Minimum
Recommended Pad Layout
Measured at Zero Bias
Measured at Stand-off
Voltage VWM
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
0
25
50
75
100
125
150
175
120 130 140 150 160 170 180 190 200 210 200
TA - Ambient Temperature (°C)
VWM - Reverse Stand-Off Voltage (V)
Fig. 4 - Typical Junction Capacitance
Fig. 6 - Power Derating Curve
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AC (SMA)
Cathode Band
Mounting Pad Layout
0.074 (1.88)
MAX.
0.066 (1.68)
MIN.
0.110 (2.79)
0.100 (2.54)
0.065 (1.65)
0.049 (1.25)
0.177 (4.50)
0.157 (3.99)
0.060 (1.52)
MIN.
0.012 (0.305)
0.006 (0.152)
0.208 (5.28)
REF.
0.090 (2.29)
0.078 (1.98)
0.060 (1.52)
0.030 (0.76)
0.008 (0.203)
0 (0)
0.208 (5.28)
0.194 (4.93)
Revision: 10-Dec-13
Document Number: 89376
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号：
P2SMA170A-M3/5AT
DIODE 200 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMA, 2 PIN, Transient Suppressor
VISHAY
P2SMA170A-M3/61T
DIODE 200 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMA, 2 PIN, Transient Suppressor
VISHAY
©2020 ICPDF网 联系我们和版权申明