首页 |元器件品牌

P6KA18-HE3/54 [VISHAY]

DIODE 600 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, ROHS COMPLIANT, PLASTIC, DO-15, 2 PIN, Transient Suppressor;
P6KA18-HE3/54
型号： P6KA18-HE3/54
厂家： VISHAY    VISHAY
描述：

DIODE 600 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, ROHS COMPLIANT, PLASTIC, DO-15, 2 PIN, Transient Suppressor

电视
文件： 总5页 (文件大小：82K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
P6KA6.8 thru P6KA43A  
Vishay General Semiconductor  
®
PAR Transient Voltage Suppressors  
High Temperature Stability and High Reliability Conditions  
FEATURES  
• Junction passivation optimized design  
passivated anisotropic rectifier technology  
• T = 185 °C capability suitable for high  
J
reliability and automotive requirement  
• Available in uni-directional polarity only  
• 600 W peak pulse power capability with a  
10/1000 µs waveform, repetitive rate (duty  
cycle): 0.01 %  
DO-204AC (DO-15)  
• Excellent clamping capability  
• Very fast response time  
PRIMARY CHARACTERISTICS  
• Low incremental surge resistance  
• Solder dip 275 °C max. 10 s, per JESD 22-B106  
• AEC-Q101 qualified  
VBR  
PPPM  
PD  
6.8 V to 43 V  
600 W  
5.0 W  
75 A  
• Compliant to RoHS Directive 2002/95/EC and in  
accordance to WEEE 2002/96/EC  
IFSM  
TJ max.  
185 °C  
MECHANICAL DATA  
Case: DO-204AC, molded epoxy over passivated  
junction  
Molding compound meets UL 94 V-0 flammability  
rating  
TYPICAL APPLICATIONS  
Use in sensitive electronics protection against voltage  
transients induced by inductive load switching and  
lighting on ICs, MOSFET, signal lines of sensor units  
for consumer, computer, industrial, automotive, and  
telecommunication.  
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified  
Terminals: Matte tin plated leads, solderable per  
J-STD-002 and JESD 22-B102  
HE3 suffix meets JESD 201 class 2 whisker test  
Polarity: Color band denotes cathode end  
MAXIMUM RATINGS (T = 25 °C unless otherwise noted)  
A
PARAMETER  
SYMBOL  
PPPM  
IPPM  
VALUE  
UNIT  
W
Peak pulse power dissipation with a 10/1000 µs (1) (fig. 1)  
Pulse pulse current with a 10/1000 µs waveform (1) (fig. 3)  
Power dissipation on infinite heatsink at TL = 75 °C (fig. 5)  
Peak forward surge current, 8.3 ms single half sine-wave (2)  
Maximum instantaneous forward voltage at 50 A (2)  
Operating junction and storage temperature range  
600  
See next table  
5.0  
A
PD  
W
IFSM  
75  
A
VF  
3.5  
V
TJ, TSTG  
- 65 to + 185  
°C  
Notes  
(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2  
(2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 per minute maximum  
Document Number: 88368  
Revision: 09-Feb-11  
For technical questions within your region, please contact one of the following:  
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
www.vishay.com  
1
P6KA6.8 thru P6KA43A  
Vishay General Semiconductor  
ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted)  
A
BREAKDOWN  
VOLTAGE  
VBR (1) AT IT  
(V)  
TJ = 150 °C  
Maximum  
Reverse  
Leakage  
at VWM  
MAXIMUM  
CLAMPING  
VOLTAGE COEFFICIENT  
MAXIMUM  
TEMP.  
PEAK  
PULSE  
CURRENT  
IPPM (2) (A)  
STAND-  
OFF  
VOLTAGE  
TEST  
CURRENT  
IT (A)  
Maximum  
ReverseLeakage  
at VWM  
DEVICE  
TYPE  
AT IPPM VC  
OF VBR  
(%/°C)  
VWM (V)  
ID (µA)  
ID (µA)  
(V)  
MIN.  
6.12  
6.45  
6.75  
7.13  
7.38  
7.79  
8.19  
8.65  
9.00  
9.50  
9.90  
10.5  
10.8  
11.4  
11.7  
12.4  
13.5  
14.3  
14.4  
15.2  
16.2  
17.1  
18.0  
19.0  
19.8  
20.9  
21.6  
22.8  
24.3  
25.7  
27.0  
28.5  
29.7  
31.4  
32.4  
34.2  
35.1  
37.1  
38.7  
40.9  
MAX.  
7.48  
7.14  
8.25  
7.88  
9.02  
8.61  
10.0  
9.55  
11.0  
10.5  
12.1  
11.6  
13.2  
12.6  
14.3  
13.7  
16.3  
15.8  
17.6  
16.8  
19.8  
18.9  
22.0  
21.0  
24.2  
23.1  
26.4  
25.2  
29.7  
28.4  
33.0  
31.5  
36.3  
34.7  
39.6  
37.8  
42.9  
41.0  
47.3  
45.2  
P6KA6.8  
P6KA6.8A  
P6KA7.5  
P6KA7.5A  
P6KA8.2  
P6KA8.2A  
P6KA9.1  
P6KA9.1A  
P6KA10  
10  
10  
5.50  
5.80  
6.05  
6.40  
6.63  
7.02  
7.37  
7.78  
8.10  
8.55  
8.92  
9.40  
9.72  
10.2  
10.5  
11.1  
12.1  
12.8  
12.9  
13.6  
14.5  
15.3  
16.2  
17.1  
17.8  
18.8  
19.4  
20.5  
21.8  
23.1  
24.3  
25.6  
26.8  
28.2  
29.1  
30.8  
31.6  
33.3  
34.8  
36.8  
500  
500  
250  
250  
100  
100  
25  
1000  
1000  
500  
500  
200  
200  
50  
55.6  
57.1  
51.3  
53.1  
48.0  
49.6  
43.5  
44.8  
40.0  
41.4  
37.0  
38.5  
34.7  
35.9  
31.6  
33.0  
27.3  
28.3  
25.5  
26.7  
22.6  
23.8  
20.6  
21.7  
18.8  
19.6  
17.3  
18.1  
15.3  
16.0  
13.8  
14.5  
12.6  
13.1  
11.5  
12.0  
10.6  
11.1  
9.7  
10.8  
10.5  
11.7  
11.3  
12.5  
12.1  
13.8  
13.4  
15.0  
14.5  
16.2  
15.6  
17.3  
16.7  
19.0  
18.2  
22.0  
21.2  
23.5  
22.5  
26.5  
25.2  
29.1  
27.7  
31.9  
30.6  
34.7  
33.6  
39.1  
37.5  
43.5  
41.4  
47.7  
45.7  
52.0  
49.9  
56.4  
53.9  
61.9  
59.3  
0.057  
0.057  
0.061  
0.061  
0.065  
0.065  
0.068  
0.068  
0.073  
0.073  
0.075  
0.076  
0.076  
0.078  
0.081  
0.081  
0.084  
0.084  
0.086  
0.080  
0.088  
0.088  
0.090  
0.090  
0.092  
0.092  
0.094  
0.094  
0.096  
0.096  
0.097  
0.097  
0.098  
0.098  
0.099  
0.099  
0.100  
0.100  
0.101  
0.101  
10  
10  
10  
10  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
25  
50  
10  
20  
P6KA10A  
P6KA11  
10  
20  
5.0  
5.0  
2.0  
2.0  
2.0  
2.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
P6KA11A  
P6KA12  
P6KA12A  
P6KA13  
P6KA13A  
P6KA15  
P6KA15A  
P6KA16  
P6KA16A  
P6KA18  
P6KA18A  
P6KA20  
P6KA20A  
P6KA22  
P6KA22A  
P6KA24  
P6KA24A  
P6KA27  
P6KA27A  
P6KA30  
P6KA30A  
P6KA33  
P6KA33A  
P6KA36  
P6KA36A  
P6KA39  
P6KA39A  
P6KA43  
P6KA43A  
10.1  
Notes  
(1) Pulse test: tp 50 ms  
(2) Surge current waveform per fig. 3 and derate per fig. 2  
(3) All terms and symbols are consistent with ANSI/IEEE C62.35  
www.vishay.com  
2
For technical questions within your region, please contact one of the following:  
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
Document Number: 88368  
Revision: 09-Feb-11  
P6KA6.8 thru P6KA43A  
Vishay General Semiconductor  
ORDERING INFORMATION (Example)  
PREFERRED P/N  
UNIT WEIGHT (g)  
PREFERRED PACKAGE CODE  
BASE QUANTITY  
DELIVERY MODE  
P6KA6.8AHE3/54 (1)  
0.415  
54  
4000  
13" diameter paper tape and reel  
Note  
(1) AEC-Q101 qualified  
RATINGS AND CHARACTERISTICS CURVES  
(T = 25 °C unless otherwise noted)  
A
100  
150  
TJ = 25 °C  
Pulse Width (td)  
is defined as the Point  
where the Peak Current  
decays to 50 % of IPPM  
Non-Repetitive Pulse  
Waveform shown in Fig. 3  
TA = 25 °C  
tr = 10 µs  
Peak Value  
IPPM  
10  
100  
50  
0
Half Value -  
IPP  
2
IPPM  
1
10/1000 µs Waveform  
as defined by R.E.A.  
td  
0.1  
1.0 ms  
10 ms  
0.1 µs  
1.0 µs  
10 µs  
100 µs  
1.0  
3.0  
4.0  
0
2.0  
t - Time (ms)  
td - Pulse Width (s)  
Figure 1. Peak Pulse Power Rating Curve  
Figure 3. Pulse Waveform  
6000  
1000  
100  
TJ = 25 °C  
f = 1.0 MHz  
Vsig = 50 mVp-p  
Measured at  
Zero Bias  
75  
50  
Measured at Stand-Off  
Voltage, VWM  
100  
10  
25  
0
1.0  
10  
100  
200  
0
25  
50  
75  
100  
125  
150 175  
200  
VBR - Breakdown Voltage (V)  
TJ - Initial Temperature (°C)  
Figure 2. Pulse Power or Current vs. Initial Junction Temperature  
Figure 4. Typical Junction Capacitance  
Document Number: 88368  
Revision: 09-Feb-11  
For technical questions within your region, please contact one of the following:  
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
www.vishay.com  
3
P6KA6.8 thru P6KA43A  
Vishay General Semiconductor  
200  
100  
6
TL = 75 °C  
8.3 ms Single Half Sine-Wave  
60 Hz  
Resistive or  
Inductive Load  
5
4
3
L = 0.375" (9.5 mm)  
Lead Lengths  
2
1
0
10  
1
10  
100  
0
25  
50  
75  
100 125  
150  
175  
200  
Number of Cycles at 60 HZ  
TL - Lead Temperature (°C)  
Figure 5. Power Derating Curve  
Figure 6. Maximum Non-Repetitive Forward Surge Current  
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)  
DO-204AC (DO-15)  
0.034 (0.86)  
0.028 (0.71)  
DIA.  
1.0 (25.4)  
MIN.  
0.300 (7.6)  
0.230 (5.8)  
0.140 (3.6)  
0.104 (2.6)  
DIA.  
1.0 (25.4)  
MIN.  
www.vishay.com  
4
For technical questions within your region, please contact one of the following:  
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
Document Number: 88368  
Revision: 09-Feb-11  
Legal Disclaimer Notice  
www.vishay.com  
Vishay  
Disclaimer  
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE  
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,  
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other  
disclosure relating to any product.  
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or  
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all  
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,  
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular  
purpose, non-infringement and merchantability.  
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical  
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements  
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular  
product with the properties described in the product specification is suitable for use in a particular application. Parameters  
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All  
operating parameters, including typical parameters, must be validated for each customer application by the customer’s  
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,  
including but not limited to the warranty expressed therein.  
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining  
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.  
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree  
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and  
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay  
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to  
obtain written terms and conditions regarding products designed for such applications.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by  
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.  
Material Category Policy  
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the  
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council  
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment  
(EEE) - recast, unless otherwise specified as non-compliant.  
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that  
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.  
Revision: 12-Mar-12  
Document Number: 91000  
1

相关型号：

P6KA18/1

 Trans Voltage Suppressor Diode, 600W, 14.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC, PLASTIC, DO-15, 2 PIN
VISHAY

P6KA18/4-E3

 DIODE 600 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, PLASTIC, DO-15, 2 PIN, Transient Suppressor
VISHAY

P6KA18A

 AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR
VISHAY

P6KA18A-1

 Trans Voltage Suppressor Diode, 600W, 15.3V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC, PLASTIC, DO-15, 2 PIN
VISHAY

P6KA18A-1-E3

 Trans Voltage Suppressor Diode, 600W, 15.3V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC, PLASTIC, DO-15, 2 PIN
VISHAY

P6KA18A-23

 Trans Voltage Suppressor Diode, 600W, 15.3V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC, PLASTIC, DO-15, 2 PIN
VISHAY

P6KA18A-23-E3

 Trans Voltage Suppressor Diode, 600W, 15.3V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC, PLASTIC, DO-15, 2 PIN
VISHAY

P6KA18A-E3

 Trans Voltage Suppressor Diode, 600W, 15.3V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC, PLASTIC, DO-15, 2 PIN
VISHAY

P6KA18A-E3/1

 DIODE 600 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, PLASTIC, DO-15, 2 PIN, Transient Suppressor
VISHAY

P6KA18A-E3/23

 DIODE 600 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, PLASTIC, DO-15, 2 PIN, Transient Suppressor
VISHAY

P6KA18A-E3/4

 DIODE 600 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, PLASTIC, DO-15, 2 PIN, Transient Suppressor
VISHAY

P6KA18A-HE3/54

 DIODE 600 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, ROHS COMPLIANT, PLASTIC, DO-15, 2 PIN, Transient Suppressor
VISHAY
©2020 ICPDF网 联系我们和版权申明