PAT0603E1090BST1 [VISHAY]
RES SMD 109 OHM 0.1% 0.15W 0603;
| 型号： | PAT0603E1090BST1 |
| 厂家： | 
VISHAY |
| 描述： | RES SMD 109 OHM 0.1% 0.15W 0603 |
| 文件： | 总4页 (文件大小：102K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PAT
www.vishay.com
Vishay Dale Thin Film
Precision Automotive Thin Film Chip Resistors,
AEC-Q200 Qualified, Hi-Rel COTS
FEATURES
• Resistance range: 2.5 Ω to 3 MΩ
• AEC-Q200 qualified
• AEC-Q200 ESD rated class 1C (2 kV)
• Laser trimmed to any value
• Moisture resistant to MIL-STD-202, method 202
• Tantalum nitride resistor film on high purity
alumina substrate
Available
Available
• 100 % visual inspected per MIL-PRF-55342
• 2 kV (HBM) ESD rating
• Sn / Pb solder version available
• Laser-trimmed tolerances to 0.1 %
• Load life stability < 0.05 % at 1000 h at 70 °C
• Very low noise and voltage coefficient
(< -30 dB, < 0.1 ppm/V)
• Sulfur resistant (per ASTM B809-95 humid vapor test)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
These chip resistors are available in wraparound
terminations styles in 8 case sizes. They incorporate self
passivated enhanced tantalum nitride resistor film to give
superior performance on moisture resistance, electrostatic
discharge, voltage coefficient, power handling and
resistance stability. The terminations consist of an adhesion
layer, a leach resistant nickel barrier, and solder coating.
Both, lead (Pb)-free solder (standard) and tin / lead solder
(non-standard) options are available. This product will
out-perform all requirements of AEC-Q200. Additional
custom lot screening per MIL-PRF-55342 available upon
request. Contact product marketing for an estimate.
Available
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
CONSTRUCTION
Tantalum Nitride
Resistive Film
Passivation
Solder
Coating
TYPICAL PERFORMANCE
ABSOLUTE
Nickel Barrier
High Purity
Alumina Substrate
Adhesion Layer
TCR
TOL.
25
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Material
Tantalum nitride
-
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
2.5 Ω to 3 MΩ
25 ppm/°C to 100 ppm/°C
0.1 % to 1.0 %
0.05 %
-
-55 °C to +125 °C
+25 °C
2000 h at 70 °C rated power
Not applicable
Less than 0.1 ppm/V
75 V to 200 V
-55 °C to +155 °C
-55 °C to +155 °C
< -30 dB
-
-
-
-
-
-
Shelf Life Stability: Absolute
100 ppm
1 year at 25 °C
COMPONENT RATINGS
CASE SIZE
0402
0603
0805
1206
1505
2208
2010
POWER RATING (mW)
WORKING VOLTAGE (V)
RESISTANCE RANGE (Ω)
20 to 51K
50
150
200
400
400
750
800
1000
75
75
2.5 to 130K
10 to 301K
10 to 1M
10 to 1M
10 to 1.75M
10 to 2M
100
200
150
150
200
200
2512
10 to 3M
Revision: 28-Jun-2021
Document Number: 60024
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PAT
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
T
D
W
T
E
L
L
CASE SIZE
0402
0603
0805
1206
1505
2010
2208
2512
L
W
T
D
E
0.041 0.003
0.064 0.006
0.080 0.006
0.126 0.008
0.155 0.007
0.209 0.009
0.230 0.007
0.259 0.009
0.022 0.003
0.032 0.005
0.050 0.005
0.063 0.005
0.050 0.005
0.098 0.005
0.075 0.005
0.124 0.005
0.015 0.003
0.015 0.003
0.015 0.003
0.015 0.003
0.015 0.003
0.015 0.003
0.015 0.003
0.015 0.003
0.010 0.005
0.012 0.005
0.015 0.005
0.010 0.005
0.015 0.005
0.015 0.005
0.020 + 0.005 / - 0.010 0.020 + 0.005 / - 0.010
0.015 0.005
0.020 0.005
0.020 0.005
0.020 0.005
0.015 0.005
0.020 0.005
0.020 0.005
0.020 0.005
ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements)
LIMITS
TYPICAL VISHAY
ENVIRONMENTAL TEST
CONDITIONS
PER AEC-Q200 PERFORMANCE
Resistance Temperature Characteristic
Max. Ambient Temp. at Rated Wattage
Max. Ambient Temp. at Power Derating
-55 °C to +125 °C
50 ppm/°C
+70 °C
+150 °C
0.1 %
0.15 %
0.20 %
0.10 %
0.1 %
0.1 %
0.1 %
0.10 %
0.10 %
95 %
35 ppm/°C
+70 °C
+150 °C
High Temperature Storage
Temperature Cycling
Moisture Resistance
Biased Humidity
ΔR
ΔR
ΔR
MIL-STD-202, 108, 1000 h at 125 °C
JESD22, JA-104, 1000 cycles, -55 °C to +125 °C
MIL-STD-202, 106
MIL-STD-202, 103, 1000 h at 85 °C, 85 % RH, 10 % P
MIL-STD-202, 108 at 125 °C, 1000 h
MIL-STD-202, method 213, condition C
MIL-STD-202 method 204, 10 Hz to 2 kHz
MIL-STD-202 method 210, condition D
AEC-Q200-002 at 2 kV, human body
J-STD-002, method B and B1
+ 0.016 %
+ 0.013 %
+ 0.0010 %
+ 0.004 %
+ 0.0220 %
+ 0.004 %
+ 0.0030 %
+ 0.0150 %
- 0.032 %
Acceptable
+ 0.009 %
Acceptable
ΔR
Life
ΔR
Mechanical Shock
Vibration
ΔR
ΔR
Resistance to Soldering Heat
Electrostatic Discharge
Solderability
ΔR
ΔR
Visual
Terminal Strength
Flame Retardance
ΔR
Visual
AEC-Q200-006 at 1 kg for 60 s
0.10 %
AEC-Q200-001 para 4.0
DERATING CURVE
Axis Title
100
10000
1000
100
80
60
40
20
0
10
0
155
70
125
Ambient Temperature (°C)
Revision: 28-Jun-2021
Document Number: 60024
2
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PAT
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: PAT1206E1002BST1
P
A
T
1
2
0
6
E
1
0
0
2
B
S
T
1
GLOBAL CASE
TCR
RESISTANCE
TOLERANCE
TERMINATION
PACKAGING
MODEL
SIZE
CHARACTERISTIC
PAT
0402
0603
0805
1206
1505
2010
2208
2512
E = 25 ppm/°C
H = 50 ppm/°C
K = 100 ppm/°C
L = 200 ppm/°C
The first 3 digits are
significant figures
and the last digit
specifies the number
of zeros to follow.
“R” designates the
decimal point.
B = 0.1 %
D = 0.5 %
F = 1.0 %
G = 2.0 %
J = 5.0 %
S = wraparound
lead (Pb)-free
solder
w/nickel barrier
B = wraparound
Sn / Pb
BULK
BS = 100 min., 1 mult.
WAFFLE
WS = 100 min., 1 mult.
W0 = 100 min., 100 mult.
WI = 100 min., 1 mult.
(item single lot date code)
WP = 100 min., 1 mult.
(package unit single lot
date code)
w/nickel barrier
Example:
10R0 = 10 Ω
1000 = 100 Ω
1002 = 10 kΩ
TAPE AND REEL
T0 = 100 min., 100 mult.
T1 = 1000 min., 1000 mult.
T3 = 300 min., 300 mult.
T5 = 500 min., 500 mult.
TF = full reel
TS = 100 min., 1 mult.
TI = 100 min., 1 mult.
(item single lot date code)
TP = 100 min., 1 mult.
(package unit single lot
date code)
Note
(1)
Preferred packaging code
TOLERANCE
(%)
TCR
RESISTANCE
(ppm/°C)
25, 50, 100, 200
100, 200
10 Ω to 1 MΩ
5 Ω to 10 Ω
1.0 Ω to 5 Ω
0.1, 0.5, 1, 2, 5
1, 2, 5
200
1, 2, 5
Revision: 28-Jun-2021
Document Number: 60024
3
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号：
PAT0603E10R0BST1
Precision Automotive Thin Film Chip Resistors, AEC-Q200 Qualified, 2 kV ESD Rating
VISHAY
PAT0603E10R0DST1
Precision Automotive Thin Film Chip Resistors, AEC-Q200 Qualified, 2 kV ESD Rating
VISHAY
PAT0603E10R0FST1
Precision Automotive Thin Film Chip Resistors, AEC-Q200 Qualified, 2 kV ESD Rating
VISHAY
PAT0603E1110BST1
Fixed Resistor, Thin Film, 0.15W, 111ohm, 75V, 0.1% +/-Tol, -25,25ppm/Cel, 0603
VISHAY
©2020 ICPDF网 联系我们和版权申明