PATT0402E1000BGT1 [VISHAY]
RES SMD 100 OHM 0.1% 1/20W 0402;型号: | PATT0402E1000BGT1 |
厂家: | VISHAY |
描述: | RES SMD 100 OHM 0.1% 1/20W 0402 |
文件: | 总4页 (文件大小:90K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PATT
Vishay Dale Thin Film
www.vishay.com
Precision Automotive High Temperature (155 °C at Full
Rated Power) Thin Film Chip Resistor, AEC-Q200 Qualified
FEATURES
• Resistance range: 1.0 Ω to 1 MΩ
• AEC-Q200 qualified, table 7F
• AEC-Q200 qualified, ESD rated class 1C
(< 1 kΩ: 1 kV; > 1 kΩ: 2 kV)
• Laser trimmed to any value
• Intrinsic moisture protected resistor element
• Moisture resistant to MIL-STD-202, method 106
• Tantalum nitride resistor film on alumina substrate
• 100 % visual inspected per MIL-PRF-55342
LINKS TO ADDITIONAL RESOURCES
• Laser-trimmed tolerances to 0.1 %
• Load life stability 0.2 % at 1000 h at 155 °C and 100 %
rated power
Infographics
• Very low noise and voltage coefficient
The terminations consist of an adhesion layer, a leach
(< -30 dB, < 0.1 ppm/V)
resistant nickel barrier and gold plating compatible with high
temperature solder systems.
• Sulfur resistant (per ASTM B809-95 humid vapor test)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
CONSTRUCTION
Tantalum Nitride
Resistive Film
TYPICAL PERFORMANCE
Passivation
Gold
ABSOLUTE
Nickel Barrier
TCR
TOL.
25
High Purity
Alumina Substrate
Adhesion Layer
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Material
Tantalum nitride
1.0 Ω to 1 MΩ
25 ppm/°C to 100 ppm/°C
0.1 % to 1.0 %
0.2 %
-
Resistance Range
TCR: Absolute
-
-55 °C to +175 °C
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
+25 °C
1000 h at 155 °C and 100 % rated power
Not applicable
Less than 0.1 ppm/V
75 V
-
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range (1)
Noise
-
-
-55 °C to +250 °C
-55 °C to +250 °C
< -30 dB
-
-
-
Shelf Life Stability: Absolute
100 ppm
1 year at 25 °C
Note
(1)
Storage temperature rating is for device only
COMPONENT RATINGS
CASE SIZE
POWER RATING (mW)
WORKING VOLTAGE (V)
RESISTANCE RANGE (Ω)
1.5 to 51K
0402
50
75
75
0603
150
200
400
2.75 to 120K
0805
100
200
2.75 to 301K
1206
1.0 to 1M
Revision: 08-Mar-2021
Document Number: 60124
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PATT
Vishay Dale Thin Film
www.vishay.com
DIMENSIONS in inches
D
T
D
W
T
E
L
L
CASE SIZE
0402
0603
0805
1206
L
W
T
D
E
0.042 0.008
0.064 0.006
0.080 0.006
0.126 0.008
0.022 0.005
0.032 0.005
0.050 0.005
0.063 0.005
0.015 0.003
0.015 0.003
0.015 0.003
0.015 0.003
0.010 0.005
0.012 0.005
0.016 0.008
0.010 0.005
0.015 0.005
0.015 0.005
0.020 + 0.005 / - 0.01 0.020 + 0.005 / -0.01
ENVIRONMENTAL TESTS
ENVIRONMENTAL TEST
CONDITIONS
TYPICAL VISHAY PERFORMANCE
High temperature storage
MIL-STD-202 method 108, 1000 h at 125 °C
0.05 %
JESD22 method JA-104, 1000 cycles,
-55 °C to +155 °C
MIL-STD-202 method 106
MIL-STD-202 method 103, 1000 h at 85 °C, 85 % RH,
10 % rated power
Temperature cycling
Moisture resistance
Biased humidity
0.115 %
0.017 %
0.133 %
MIL-STD-202 method 108,
1000 h at 155 °C
0.20 % at 100 % rated power and 155 °C.
Effective film temperature is 200 °C.
Life
Mechanical shock
Vibration
Resistance to soldering heat
MIL-STD-202 method 213, condition C
MIL-STD-202 method 204, 10 Hz to 2 kHz
MIL-STD-202 method 210, condition B
0.008 %
0.008 %
0.09 %
AEC-Q200-002, human body
(< 1 kΩ: 1 kV; > 1 kΩ: 2 kV)
Electrostatic discharge
0.10 % at 2 kV
Solderability
Die shear
Flame retardance
MIL-STD-883 method 2003 para 2.3.1 and J-STD-002
MIL-PRF-55342
Pass
Pass
Pass
AEC-Q200-001 para 4.0
MECHANICAL SPECIFICATIONS
Resistive element
Tantalum nitride
Substrate material
Alumina
Terminations
Gold (10 μin. min.) over nickel (50 μin. min.)
DERATING CURVE
Axis Title
10000
100
80
60
40
20
0
1000
100
10
-55
0
50
100
200
250
155
Ambient Temperature (°C)
Revision: 08-Mar-2021
Document Number: 60124
2
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PATT
Vishay Dale Thin Film
www.vishay.com
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: PATT0603E1002BGT1
P
A
T
T
0
6
0
3
E
1
0
0
2
B
G
T
1
GLOBAL CASE
TCR
RESISTANCE
TOLERANCE
TERMINATION
PACKAGING
MODEL
SIZE
CHARACTERISTIC
PATT
0402
0603
E = 25 ppm/°C
H = 50 ppm/°C
The first 3 digits are
significant figures and
B = 0.1 %
D = 0.5 %
F = 1.0 %
G = 2.0 %
J = 5.0 %
G = wraparound
gold over nickel
barrier
BULK
BS = 100 min., 1 mult.
WAFFLE
0805 K = 100 ppm/°C (1) the last digit specifies
1206
L = 200 ppm/°C
the number of zeros
to follow. “R”
designates the
decimal point.
WS = 100 min., 1 mult.
W0 = 100 min.,100 mult.
WI = 100 min.,1 mult.
(item single lot date code)
WP = 100 min.,1 mult.
(package unit single lot
date code)
Example:
10R0 = 10 Ω
1000 = 100 Ω
1002 = 10 kΩ
TAPE AND REEL
T0 = 100 min., 100 mult.
T1 = 1000 min., 1000 mult.
T3 = 300 min., 300 mult.
T5 = 500 min., 500 mult.
TF = full reel
TS = 100 min., 1 mult.
TI = 100 min., 1 mult.
(item single lot date code)
TP = 100 min., 1 mult.
(package unit single lot
date code)
Note
(1)
Characteristic TCR - (R < 10 Ω)
TCR
(ppm/°C)
TOLERANCE
(%)
RESISTANCE
10 Ω to 1 MΩ
5 Ω to 10 Ω (1)
1.0 Ω to 5 Ω (1)
25, 50, 100, 200
100, 200
200
0.1, 0.5, 1, 2, 5
1, 2, 5
1, 2, 5
Note
(1)
Resistance values from 1.0 Ω to 10 Ω are undergoing PPAP qualification; results are expected to be similar to PPAP qualified 10 Ω to 120 kΩ
Revision: 08-Mar-2021
Document Number: 60124
3
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明