PC270UH10%F09 [VISHAY]
General Purpose Inductor, 270uH, 10%, Ferrite-Core, 3027,;
| 型号： | PC270UH10%F09 |
| 厂家： | 
VISHAY |
| 描述： | General Purpose Inductor, 270uH, 10%, Ferrite-Core, 3027, |
| 文件： | 总3页 (文件大小：64K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PC
Vishay Dale
www.vishay.com
Inductors, Subminiature, Shielded, Radial Leaded
FEATURES
• Classification is grade 1, class B
• Subminiature shielded
• Custom values up to 100 000 μH are available
upon request
• Printed board mounting facilitated by 0.200" [5.08 mm]
grid spacing
• Radial lead fixed inductor
• High Q values
• Unitized epoxy-molded construction
• Shielded construction to allow maximum density
packaging
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
ELECTRICAL SPECIFICATIONS
Inductance Tolerance: 10 %
Dielectric Strength: 840 VRMS at sea level
Working Voltage: 300 VDC
DENSITY SPECIFICATIONS
Weight: 1.5 g maximum
Q and SRF Values: Minimum not less than 80 % of
specified value
Shielding: 3 % coupling maximum when two units are
tested side by side
Maximum Current: Based on temperature rise not to
exceed 35 °C at + 90 °C ambient
ENVIRONMENTAL SPECIFICATIONS
Moisture: Per MIL-STD-202, method 106
MECHANICAL SPECIFICATIONS
Operating Temperature: - 55 °C to + 125 °C
Terminal Pull: 3 pounds
Vibration: Low frequency, 10 Hz to 55 Hz at 0.06" [1.52 mm]
maximum total excursion at rate of 1 linear sweep per
minute for 2 h repeated for each of three mutually
perpendicular planes
Shock: 100 g, 6 ms, body mounted
DIMENSIONS in inches [millimeters]
0.26ꢁ 0.0ꢀ0
[6.73 0.2ꢁ54 ꢂDi.
0.300 0.0ꢀ0
[7.62 0.2ꢁ54
0.270 [6.864
Mix.
0.080 0.0ꢀ0
[2.03 0.2ꢁ54
3/8 ꢀ/ꢀ6
[9.ꢁ2 ꢀ.ꢁ94
#25 0.020 0.002
[0.ꢁ08 0.0ꢁꢀ4 ꢃTC
0.200 0.00ꢁ
[ꢁ.08 0.ꢀ274
STANDARD ELECTRICAL SPECIFICATIONS
TEST
FREQ.
(MHz)
DCR
MAX.
()
RATED DC
CURRENT
(mA)
INCREMENTAL
CURRENT
(mA) (1)
IND.
(μH)
SRF NOM.
(MHz)
TOL.
(%)
Q
NOM.
MODEL
PC
PC
PC
PC
PC
PC
PC
PC
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
10
10
10
10
10
10
10
10
10
70
70
70
70
70
80
80
80
80
25
25
25
25
25
25
25
25
25
> 250
> 250
> 250
> 250
> 250
> 250
> 250
250
0.030
0.030
0.030
0.035
0.038
0.040
0.040
0.045
0.045
2500
2500
2500
2400
2300
2200
2200
2100
2100
2500
2500
2500
2400
2300
2200
2200
2100
2100
PC
230
Note
(1)
Incremental current: The DC current required to cause a 5 % reduction in the nominal inductance value.
Revision: 05-Jun-13
Document Number: 34070
1
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PC
Vishay Dale
www.vishay.com
STANDARD ELECTRICAL SPECIFICATIONS
TEST
FREQ.
(MHz)
DCR
MAX.
()
RATED DC
CURRENT
(mA)
INCREMENTAL
CURRENT
(mA) (1)
IND.
(μH)
SRF NOM.
(MHz)
TOL.
(%)
Q
NOM.
MODEL
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
47
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
80
80
85
85
90
100
115
110
110
90
90
95
95
85
95
90
120
120
115
125
115
120
120
110
115
105
105
95
95
90
95
95
100
100
100
100
95
100
90
100
25
25
25
25
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
220
190
180
160
170
155
135
120
104
93
87
79
72
63
60
54
37
28.8
23.8
21.3
20.6
18.6
17.7
14.9
13.9
12.9
11.7
10.5
5.6
5.2
4.9
4.6
4.2
3.55
3.45
3.2
2.9
2.7
0.050
0.055
0.060
0.070
0.085
0.100
0.110
0.120
0.125
0.165
0.180
0.245
0.265
0.330
0.460
0.640
0.800
0.865
0.940
1.03
1.18
1.30
1.41
1.61
2.08
2.20
2.42
2.15
2.38
2.52
2.88
3.18
3.50
4.80
5.44
5.9
2000
1900
1800
1700
1670
1540
1470
1410
1380
1200
1135
985
950
853
720
620
545
520
504
460
418
398
385
350
330
320
300
333
316
306
288
273
260
222
209
201
194
181
172
141
2000
1900
1800
1700
1670
1540
1470
1410
1380
1200
1135
985
950
853
720
620
545
520
504
460
418
398
385
350
333
330
320
300
190
175
150
125
120
110
105
100
90
56
68
82
2.5
2.5
2.5
100
120
150
180
220
270
330
390
470
560
680
820
1000
0.79
0.79
0.79
0.79
0.79
0.79
0.79
0.79
0.79
0.79
0.79
0.79
6.3
7.2
8.0
12
80
70
65
2.5
2.35
Note
(1)
Incremental current: The DC current required to cause a 5 % reduction in the nominal inductance value.
MARKING
- Manufacturer data printed
ORDERING INFORMATION
PC
0.10 μH
10 %
EB
e2
MODEL
INDUCTANCE
VALUE
INDUCTANCE
TOLERANCE
PACKAGE
CODE
JEDEC LEAD (Pb)-FREE
STANDARD
GLOBAL PART NUMBER
P
C
9
E
B
R
1
0
K
PACKAGE
CODE
INDUCTANCE
VALUE
INDUCTANCE
TOLERANCE
MODEL
Revision: 05-Jun-13
Document Number: 34070
2
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号：
PC27UH+/-10%
General Fixed Inductor, 1 ELEMENT, 27 uH, GENERAL PURPOSE INDUCTOR, RADIAL LEADED
VISHAY
©2020 ICPDF网 联系我们和版权申明