PE30L0FG102MAB [VISHAY]
RESISTOR, POTENTIOMETER, CERMET, 1 TURN(S), 3 W, 1000 ohm, ROHS COMPLIANT;
| 型号： | PE30L0FG102MAB |
| 厂家： | 
VISHAY |
| 描述： | RESISTOR, POTENTIOMETER, CERMET, 1 TURN(S), 3 W, 1000 ohm, ROHS COMPLIANT 电阻器 |
| 文件： | 总6页 (文件大小：155K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PE30
Vishay Sfernice
www.vishay.com
Fully Sealed Potentiometer Professional Grade
FEATURES
• High power rating 3 W at 70 °C
• Low temperature coefficient (150 ppm/°C
typical)
• Cermet element
• Full sealing
• Use of faston 2.86 connections
click logo to get started
DESIGN SUPPORT TOOLS
• Tests according to CECC 41000 or IEC 60393-1
• Wires and connectors available
• Custom design on request
Models
Available
• Center detent option
QUICK REFERENCE DATA
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Multiple module
Switch module
Detent module
No
n/a
Yes
A: linear, L: logarithmic, F: reverse
Special electrical laws
logarithmic
IP 67
25K cycles
Sealing level
Lifespan
DIMENSIONS in millimeters (inches) 0.5 mm ( 0.02")
8
20 (0.79) max.
12 (0.47)
PE30L
76°
14 wrench
(0.31)
13 (0.51)
max.
Thread M10 x 0.75
Ø 6
a
c
R 5.2
(0.20)
(0.24)
0.5
3
FG = 16 (0.63)
(0.02)
b
(0.12)
Ø 19.7
(0.78)
FL = 25 (0.99)
2.85 (0.11)
FR = 50 (1.97)
3
PE30LL: LPRP - Locating Peg
0.8
(0.3)
(0.12)
Ø 1.8 (0.07)
Ø 10.5
(0.41)
12.5
(0.49)
9.2
8.8
(0.36)
(0.35)
Ø 3.5
(0.14)
3
2.3
(0.9)
(0.12)
PANEL MOUNT
23 (0.91) max.
PE30ME: Panel Sealed
16 (0.63) max.
Sealing ring
0.7 (0.03)
Ø 1 (0.4)
Slot
1 x 1.8
deep
Ø 1.2
(0.05)
Ø 6
(0.24)
Flats
located
Ø 19.7
(0.78)
8
0.2
(0.31 0.01)
Ø 10.5
(0.41)
9 (0.35)
FJ = 22 (0.87)
FD = 13
(0.61)
PANEL MOUNT
FP = 47 (1.85)
Revision: 01-Feb-18
Document Number: 51037
1
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PE30
Vishay Sfernice
www.vishay.com
ELECTRICAL SPECIFICATIONS
Resistive element
Cermet
Electrical travel
270° 10°
linear taper
22 to 10 M
100 to 2.2 M
Resistance range
Standard series E3
Tolerance
logarithmic taper
1 - 2.2 - 4.7 and on request 1 - 2 - 5
standard
20 ꢀ
on request
10 ꢀ to 5 ꢀ
100
80
60
40
20
0
F
A
L
Taper
0
20
40
60
80
100
% CLOCKWISE SHAFT ROTATION
3
LIN.TAPER A
2
linear
logarithmic
3 W at 70 °C
1.5 W at 70 °C
Power rating
LOG.TAPER
L and F
1
0
0
20
40
60 70 80 100 120 140
AMBIENT TEMPERATURE IN °C
c
a
(3)
cw
Circuit diagram
(1)
b
(2)
Temperature coefficient (typical)
Limiting element voltage
150 ppm/°C
300 V
Contact resistance variation (typical)
End resistance (typical)
3 ꢀ Rn or 3
1
Dielectric strength (RMS)
2500 V
Insulation resistance (300 VDC
)
105 M
Independent linearity (typical)
5 ꢀ
Revision: 01-Feb-18
Document Number: 51037
2
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PE30
Vishay Sfernice
www.vishay.com
STANDARD RESISTANCE ELEMENT DATA
LINEAR TAPER
LOGS TAPER
STANDARD
RESISTANCE
VALUES
MAX.
POWER
AT 70 °C
MAX.
WORKING
VOLTAGE
MAX. CUR.
THROUGH
WIPER
MAX.
POWER
AT 70 °C
MAX.
WORKING
VOLTAGE
MAX. CUR.
THROUGH
WIPER
W
V
mA
W
V
mA
22
47
3
3
8.1
11.9
17.3
25.7
37.5
54.8
81.2
119.9
173
369
252
173
116
79
100
3
12.2
18.2
26.6
38.7
57.4
83.9
122
220
3
1.5
1.5
122
82.6
56.6
38.7
26.1
17.9
12.2
8.25
5.64
3
1.36
0.63
0.30
0.13
470
3
1K
3
54
1.5
2.2K
4.7K
10K
22K
47K
100K
220K
470K
1M
3
37
1.5
3
25
1.5
3
17
1.5
3
257.7
300
11
1.5
181.6
265
1.91
0.90
0.41
0.19
0.09
0.04
0.02
0.01
6.3
3
1.5
300
1.5
300
300
1.36
0.63
0.30
0.13
0.06
0.03
0.9
300
300
0.41
0.19
0.09
0.04
300
300
300
2.2M
4.7M
10M
300
300
300
300
MECHANICAL SPECIFICATIONS
Mechanical travel
300° 5°
Operating torque / typical value
End stop torque
3 Ncm
4.25 oz.-inch
120 Ncm max.
250 Ncm max.
23 g to 32 g max.
10.51 lb oz.-inch max.
22 lb-inch max.
Tightening torque of mounting nut
Unit weight
0.8 oz. to 1.13 oz.
Terminals
e3: pure Sn
ENVIRONMENTAL SPECIFICATIONS
Temperature range
Climatic category
Sealing
-55 °C to +125 °C
55/125/56
Fully sealed - container IP67
OPTIONS
Length is measured from the mounting surface to the free end of the shaft. The screwdriver
slot is aligned with the wiper within 10°. Special shafts are available, in accordance to
drawings supplied by customers. We recommend that customers should not machine tool
shafts, in order to avoid damage. Bending or torsion of terminals should also be avoided.
Special feature command shaft
The panel sealing device consists of a ring located in a groove on the potentiometer face.
Sealing is obtained by tightening the ring against the panel when mounting the
Panel sealing (PE30M)
Locating peg (PE30LL)
potentiometer.
Old code: PE30P
Location is obtained by fitting a special washer on the mounting face of the potentiometer.
Old code: LPRP
The shaft locking device consists of a tapered nut tightening a slotted notched washer
against both bushing and shaft.
DBAN tightening torque is 200 Ncm, shaft locking torque being 30 Ncm.
DBAN is also available with all special types.
This device is normally supplied in a separate bag. Can be pre-mounted on request.
14 wrench
12 wrench
1)
2)
Shaft locking (PE30LD)
Assembling
Method
6.5
15
Revision: 01-Feb-18
Document Number: 51037
3
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PE30
Vishay Sfernice
www.vishay.com
CENTER DETENT
• Stable position in mid mechanical travel
• Output ratio 50 ꢀ 10 ꢀ
• Rotational life: 10 000 actuations
Full CW
Full CCW
ORDERING INFORMATION (First order only)
CV1M
MARKING
• Vishay trademark
• Part number (including ohmic value and tolerance code)
• Manufacturing date code
• Marking of terminals 3, and a, b, c
PERFORMANCE
TYPICAL VALUES AND DRIFTS
TESTS
CONDITIONS
RT/RT (%)
R1-2/R1-2 (%)
OTHER
1000 h at rated power
90'/30' - ambient temp. 70 °C
Electrical endurance
1 ꢀ
-
Contact res. variation: < 3 ꢀ Rn
Phase A dry heat 125 °C
Phase B damp heat
Phase C cold -55 °C
Climatic sequence
0.5 ꢀ
0.5 ꢀ
1 ꢀ
1 ꢀ
-
Phase D damp heat 5 cycles
56 days
40 °C 93 ꢀ HR
Damp heat, steady state
Insulation resistance: > 104 M
5 cycles
-55 °C at +125 °C
Change of temperature
Mechanical endurance
0.5 ꢀ
3 ꢀ
-
-
-
25 000 cycles
Contact res. variation: < 2 ꢀ Rn
50 g’s at 11 ms
3 successive shocks
in 3 directions
Shock
0.1 ꢀ
0.1 ꢀ
0.2 ꢀ
0.2 ꢀ
-
-
10 Hz to 55 Hz
0.75 mm or 10 g’s
during 6 h
Vibration
Note
Nothing stated herein shall be construed as a guarantee of quality or durability
•
Revision: 01-Feb-18
Document Number: 51037
4
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PE30
Vishay Sfernice
www.vishay.com
ORDERING INFORMATION (part number)
P
E
3
0
L
B
F
G
2
0
4
M
A
B
OHMIC
VALUE
SPECIAL
PACKAGING
MODEL BUSHING
OPTION
0 = none
SHAFT
TOLERANCE
M = 20 ꢀ
TAPER
NUMBER
PE30
L =
M10 x 0.75
For L bushing (= old codes:)
FG 16 mm, slotted = AC
FL 25 mm, slotted = AM
FR 50 mm, plain = AL
A law =
A = linear
B = box of (if applicable)
from 22 On request: L = clockwise
to 10 M
10 pieces
Given by
Vishay
for custom
design
or
For L bushing
D = DBAN
L = LPRP
B = DBAN
and LPRP
K = 10 ꢀ
J = 5 ꢀ
logarithmic
F = clockwise
inverse
M = panel
sealed
M10 x 0.75
L and F
laws =
For M bushing
logarithmic
FD = 13 mm, slotted = AC from 100
E105
CV1M
FJ = 22 mm, slotted = AM
FP = 47 mm, plain = AL
to 2.2 M
For M bushing
E = peg
A = peg
and DBAN
PART NUMBER DESCRIPTION (for information only)
PE30
LPRP
AC
200K 20 %
A
DBAN
CV1M
BO
e3
CUSTOM
SHAFT
LEAD
(Pb)-FREE
MODEL FEATURES OPTION SHAFT VALUE TOL. TAPER OPTION SPECIAL DETENT PACKAGING
SPECIAL
RELATED DOCUMENTS
APPLICATION NOTES
Potentiometers and Trimmers
www.vishay.com/doc?51001
www.vishay.com/doc?52029
Guidelines for Vishay Sfernice Resistive and Inductive Components
Revision: 01-Feb-18
Document Number: 51037
5
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号：
PE30L0FG105MLB
RESISTOR, POTENTIOMETER, CERMET, 1 TURN(S), 1.5 W, 1000000 ohm, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明