PE60 [VISHAY]
Power Panel Potentiometer; 功率面板电位器
| 型号： | PE60 |
| 厂家： | 
VISHAY |
| 描述： | Power Panel Potentiometer |
| 文件： | 总5页 (文件大小：124K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PE60
Vishay Sfernice
Power Panel Potentiometer
FEATURES
• High power rating (6 W at 50 °C)
• Cermet element
RoHS
COMPLIANT
• Full sealing
• Mechanical strength
• Industrial and professional grade
• Tests according to CECC 41 000
DIMENSIONS in millimeters
PE 60 L
PE 60 F
GR = 50.8 (2)
FR = 50 (1.969)
150
(5.872) Min
18
(0.709)
GJ = 22.22
(7/8)
150
(5.872) Min
18
(0.709)
FL = 25
(0.984)
GB = 12.7
(1/2)
FG = 16
Slot 1 x 1.8 deep
(0.039 x 0.071)
(0.630)
8
Ø 25
Ø 6.35
(0.250)
Ø 6
(0.236)
Slot 1 x 1.8 deep
(0.039 x 0.071)
Thread 3/8 32-UNEF-2A
Thread M 10 x 75
9.52
(3/8)
12
wrench = 12.5
(0.492)
wrench = 14
(0.551)
(0.472)
OPTION D: DBAN SHAFT LOCKING
OPTION L: PE 60 LPRP - WITH LOCATING PEG
wrench = 14 (0.551)
0.8 (0.031)
3 (0.118)
wrench = 12 (0.472)
Ø 6
(0.236)
12.5
(0.492)
9.2
(0.362)
Ø 1.8
(0.071)
2.3 (0.091)
3 (0.118)
6.5 (0.256)
Available on PE 60 L and PE 60 F
15
(0.591)
Available only with PE 60 L
Panel sealed version
PE 60 M
CIRCUIT DIAGRAM
OPTION E: Including locating peg (available only for PE 60 M)
21 (0.825)
9 (0.356)
Flat Located
8
0.2
(0.315
0.008)
0.7 (0.028)
Ø 1.2
(0.047)
Ø 6
(0.236)
Green
(3)
Yellow
(1)
CW
Ø 10.5
(0.413)
Sealing ring
(2)
Red
FD = 13 (0.514)
FJ = 22 (0.868)
FP = 47 (1.852)
Available only with bushing M10 x 0.75 and shafts Ø 6 mm
www.vishay.com
134
For technical questions, contact: sfer@vishay.com
See also: Application notes
Document Number: 51005
Revision: 05-Jun-08
PE60
Power Panel Potentiometer
Vishay Sfernice
SPECIAL FEATURES
COMMAND SHAFT
SHAFT LOCKING: DBAN
The shaft locking device consists of a tapered nut tightening
a slotted notched washer against both bushing and shaft.
DBAN tightening torque is 200 Ncm, shaft locking torque
being 30 Ncm.
Length is measured from the mounting surface to the free
end of the shaft. The screwdriver slot is aligned with the
wiper within
10°. Special shafts are available, in
accordance to drawings supplied by customers. We
recommend that customers should not machine shafts, in
order to avoid damage.
DBAN is also available with all special types.
This device is normally supplied in a separate bag. Can be
pre-mounted on request.
PANEL SEALING: PE60M
LOCATING PEG: LPRP
The panel sealing device consists of a ring located in a slot
on the potentiometer face. Sealing is obtained by tightening
the ring against the panel when mounting the potentiometer.
Location is obtained by fitting a special washer on the
potentiometer face. The peg can therefore be positioned at
90°, 180°, 270° and 360°.
ELECTRICAL SPECIFICATIONS
Resistive Element
cermet
270° 10°
Electrical Travel
Resistance Range
Linear Law
1 Ω to 1 MΩ
Logarithmic Laws
100 Ω to 2.2 MΩ
1 - 2 - 2.5 - 5
20 ꢀ
Standard series E3
Tolerance
Standard
On Request
Linear
10 ꢀ - 5 ꢀ
6 W at + 50 °C
3 W at + 50 °C
see Standard Resistance Element Data
350 V
Power Rating
Logarithmic
Temperature Coefficient
Limiting Element Voltage (Linear Law)
Contact Resistance Variation (Linear Law)
End Resistance (Typical)
3 ꢀ Rn or 0.5 Ω
0.5 Ω or 1 ꢀ
Dielectric Strength (RMS)
2500 V
Insulation Resistance (500 VDC)
106 MΩ
MECHANICAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Mechanical Travel
300° 5°
3 typical
70
Temperature Range
Climatic Category
Sealing
- 55 °C to + 125 °C
55/125/56
Operating Torque (max. Ncm)
End Stop Torque (max. Ncm)
Max Tightening Torque
of Mounting Nut (Ncm)
Unit Weight (max. g)
fully sealed
container IP67
250
25 to 35
RESISTANCE LAWS
POWER RATING CHART
100
LIN. LAW “A”
6
80
F
60
40
A
LOG. LAWS “L & F”
3
L
20
0
0
0
20
40
60
80
100
20
40
60
70 80
0
100
125
140
% CLOCKWISE SHAFT ROTATION
AMBIENT TEMPERATURE IN °C
Document Number: 51005
Revision: 05-Jun-08
For technical questions, contact: sfer@vishay.com
See also: Application notes
www.vishay.com
135
PE60
Power Panel Potentiometer
Vishay Sfernice
PERFORMANCE
TYPICAL VALUES AND DRIFTS
TESTS
CONDITIONS
ΔRT
ΔR1-2
(%)
(%)
RT
0.5 ꢀ
0.5 ꢀ
R1-2
Phase A dry heat 125 °C
Phase B damp heat
Climatic Sequence
1 ꢀ
1 ꢀ
Phase C cold - 55 °C
Phase D damp heat 5 cycles
Long Term Damp Heat
56 days
Insulation resistance: > 104 MΩ
3 ꢀ
Rotational Life
25 000 cycles
Contact res. variation: < 5 ꢀ Rn
3 ꢀ
1000 hours at rated power
90’/30’ - ambient temp. 25 °C
Load Life
Contact res. variation: < 3 ꢀ Rn
5 cycles
- 55 °C at + 125 °C
Rapid Temperature Change
(0.5 ꢀ 0.1 Ω)
50 g at 11 ms
3 successive shocks
in 3 directions
Shock
0.1 ꢀ
0.2 ꢀ
0.2 ꢀ
10 - 55 Hz
0.75 mm or 10 g
during 6 hours
Vibration
0.1 ꢀ
STANDARD RESISTANCE ELEMENT DATA
MARKING
LINEAR LAW
TYPICAL
STANDARD
RESISTANCE
VALUES
Printed:
TCR
MAX.
MAX.
MAX. CUR.
- 55 °C
+ 125 °C
POWER WORKING THROUGH
- VISHAY trademark
- SAP Part number
- manufacturing date
AT 25 °C VOLTAGE
WIPER
Ω
1
W
V
mA
ppm/°C
6
2.4
2449
1732
1095
775
2
3.5
5
5.5
500
PACKAGING
10
7.7
- in box of 5 pieces
20
11.0
12.2
17.3
24.5
34.6
38.7
54.8
77.5
110
122
173
245
346
350
548
25
490
50
346
100
200
250
500
1K
245
173.2
154.9
109.5
77.5
54.8
49.0
34.64
24.49
17.32
14.00
7.00
3.50
1.75
1.40
0.70
0.35
2K
2.5K
5K
250
10K
20K
25K
50K
100K
200K
250K
500K
1M
6
4.90
2.45
1.23
0.61
0.49
0.25
0.12
350
www.vishay.com
136
For technical questions, contact: sfer@vishay.com
See also: Application notes
Document Number: 51005
Revision: 05-Jun-08
PE60
Power Panel Potentiometer
Vishay Sfernice
SAP ORDERING INFORMATION (Part Number 18 digits)
P
E
6
0
L
0
F
G
W
2
0
4
M
A
OHMIC
VALUE
SPECIAL
LAW
MODEL
BUSHING
OPTION
0 = none
SHAFT
LEADS
TOLERANCE
NUMBER
M = Panel
sealed
L = STD
F = 3/8"
For L Bushing
FG 16 mm, slotted
For L Bushing FL 25 mm, slotted
204 =
200 kΩ
(if applicable)
20 ꢀ
on request
10 ꢀ
A = Linear
L = clockwise
logarithmic
F = clockwise
inverse
W: Wire
Given by
VISHAY
for custom
design
D = DBAN
L = LPRP
B = DBAN
and LPRP
FR 50 mm, plain
5 ꢀ
For F Bushing
GB 1/2", slotted
GJ 7/8", slotted
GR 2", slotted
logarithmic
For F Bushing
L = LPRP
For M Bushing
For M Bushing FD = 13 mm, slotted
E = Peg
FJ = 22 mm, slotted
FP = 47 mm, plain
PART NUMBER DESCRIPTION (for information only)
PE60
L
0
FG
W
200 kΩ
20 %
A
BO5
e4
OHMIC
VALUE
LEAD
(Pb)-FREE
MODEL BUSHING OPTION
SHAFT
LEADS
TOL
LAW PACKAGING SPECIAL SPECIAL
Document Number: 51005
Revision: 05-Jun-08
For technical questions, contact: sfer@vishay.com
See also: Application notes
www.vishay.com
137
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
©2020 ICPDF网 联系我们和版权申明